Xuyingnan Tao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xuyingnan Tao has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Haiqian Wang
Hefei National Research Center for Physical Science at the Microscale, University of Science and Technology of China, Hefei 230026, China
5 shared publications - Haoran Yu
Hefei National Research Center for Physical Science at the Microscale, University of Science and Technology of China, Hefei 230026, China
5 shared publications - Feiyang Yu
Hefei National Research Center for Physical Sciences at the Microscale, University of Science and Technology of China, 96 Jinzhai Road, Hefei 230026, China
4 shared publications - Tingting Zhao
Hefei National Research Center for Physical Science at the Microscale, University of Science and Technology of China, Hefei 230026, China
3 shared publications Ming Li
2 shared publications- Ming Li
Hefei National Research Center for Physical Sciences at the Microscale, University of Science and Technology of China, 96 Jinzhai Road, Hefei 230026, China
2 shared publications
Latest Publications
- 2 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (5) , 8285-8298
Oxygen Pumping Effect of Interfacial MoO x Mitigates Coking in NiCo/CeO 2 –Al 2 O 3 Catalysts for Dry Reforming of Methane
Non-noble Ni-based catalysts are highly active for dry reforming of methane (DRM) but suffer from severe carbon deposition. To address this challenge, we synthesized Mo-modified bimetallic NiCo/CeO2-Al2O3 catalysts via sol-gel method. We have demonstrated that an optimal Mo/Ni atomic ratio of 0.15 balances the trade-off between activity and coking resistance, achieving a stable 65% CH4 conversion at 700 °C over 100 h of DRM while maintaining superior coke resistance. Based on comprehensive experimental analyses, we propose that during DRM, surface and interfacial MoOx species act as the oxygen pump (MOP), generating reactive oxygen (O*) from CO2 dissociation and channeling it to adjacent components. By creating an oxygen-rich local chemical environment, this mechanism concurrently passivates the metal surface and progressively shifts the CH4 activation pathway from deep decomposition to oxidative dehydrogenation, enabling efficient carbon elimination at the cost of reduced activity. This work elucidates the oxygen pumping effect of interfacial MoOx, providing a practicable strategy for designing coking-resistant catalysts for DRM and other high-temperature processes.
- 2 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (5) , 8285-8298
Oxygen Pumping Effect of Interfacial MoO x Mitigates Coking in NiCo/CeO 2 –Al 2 O 3 Catalysts for Dry Reforming of Methane
Non-noble Ni-based catalysts are highly active for dry reforming of methane (DRM) but suffer from severe carbon deposition. To address this challenge, we synthesized Mo-modified bimetallic NiCo/CeO2-Al2O3 catalysts via sol-gel method. We have demonstrated that an optimal Mo/Ni atomic ratio of 0.15 balances the trade-off between activity and coking resistance, achieving a stable 65% CH4 conversion at 700 °C over 100 h of DRM while maintaining superior coke resistance. Based on comprehensive experimental analyses, we propose that during DRM, surface and interfacial MoOx species act as the oxygen pump (MOP), generating reactive oxygen (O*) from CO2 dissociation and channeling it to adjacent components. By creating an oxygen-rich local chemical environment, this mechanism concurrently passivates the metal surface and progressively shifts the CH4 activation pathway from deep decomposition to oxidative dehydrogenation, enabling efficient carbon elimination at the cost of reduced activity. This work elucidates the oxygen pumping effect of interfacial MoOx, providing a practicable strategy for designing coking-resistant catalysts for DRM and other high-temperature processes.
- 1 April 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (14) , 17483-17492
Interfacial Metal–Support Interaction and Catalytic Performance of Perovskite LaCrO3-Supported Ru Catalyst
Interfacial metal-support interaction (MSI) significantly affects the dispersion of active metals on the surface of the catalyst support and impacts catalyst performance. Understanding MSI is crucial for developing highly active and stable catalysts with a low metal loading, particularly for noble metal catalysts. In this work, we synthesized LaRuxCr1-xO3 catalysts with low Ru loading (x = 0.005, 0.01, and 0.02) using the sol-gel self-combustion method. We found that all of the Ru atoms immediately above or below the metal-support interface are closely bonded to the perovskite LaCrO3 surface lattice through Ru-O bonds, enhancing the MSI via interfacial reaction and charge transfer mechanisms. We identified a variety of Ru species, including small 3D Ru nanoparticles, 2D dispersed Ru surface atoms, and even 0D Ru single atoms. These highly dispersed Ru species exhibit high activity and stability under dry reforming of methane (DRM) conditions. The LaRu0.01Cr0.99O3 catalyst with very low Ru loading (0.42 wt %) was stable over a 50 h DRM test and the carbon deposition was negligible. The CH4 and CO2 conversions at 750 °C reached 83 and 86%, respectively, approaching the theoretical thermodynamic equilibrium values.
- 1 April 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (14) , 17483-17492
Interfacial Metal–Support Interaction and Catalytic Performance of Perovskite LaCrO3-Supported Ru Catalyst
Interfacial metal-support interaction (MSI) significantly affects the dispersion of active metals on the surface of the catalyst support and impacts catalyst performance. Understanding MSI is crucial for developing highly active and stable catalysts with a low metal loading, particularly for noble metal catalysts. In this work, we synthesized LaRuxCr1-xO3 catalysts with low Ru loading (x = 0.005, 0.01, and 0.02) using the sol-gel self-combustion method. We found that all of the Ru atoms immediately above or below the metal-support interface are closely bonded to the perovskite LaCrO3 surface lattice through Ru-O bonds, enhancing the MSI via interfacial reaction and charge transfer mechanisms. We identified a variety of Ru species, including small 3D Ru nanoparticles, 2D dispersed Ru surface atoms, and even 0D Ru single atoms. These highly dispersed Ru species exhibit high activity and stability under dry reforming of methane (DRM) conditions. The LaRu0.01Cr0.99O3 catalyst with very low Ru loading (0.42 wt %) was stable over a 50 h DRM test and the carbon deposition was negligible. The CH4 and CO2 conversions at 750 °C reached 83 and 86%, respectively, approaching the theoretical thermodynamic equilibrium values.
- Open Access
Influences of Ni Content on the Microstructural and Catalytic Properties of Perovskite LaNixCr1−xO3 for Dry Reforming of Methane
Perovskite oxides were widely used as precursors for developing metal-support type catalysts. It is attractive to explore the catalytic properties of the oxides themselves for dry reforming of methane (DRM). We synthesized LaNixCr1−xO3 (x = 0.05–0.5) samples in powder form using the sol-gel self-combustion method. Ni atoms are successfully doped into the LaCrO3 perovskite lattice. The perovskite grains are polycrystalline, and the crystallite size decreases with increasing Ni content. We demonstrated that the LaNixCr1−xO3 perovskites show intrinsically catalytic activity for DRM reactions. Reducing the Ni content is helpful to reduce carbon deposition resulting from the metal Ni nanoparticles that usually coexist with the highly active perovskite oxides. The CH4 conversion over the LaNi0.1Cr0.9O3 sample reaches approximately 84% at 750 °C, and the carbon deposition is negligible.
Open AccessInfluences of Ni Content on the Microstructural and Catalytic Properties of Perovskite LaNixCr1−xO3 for Dry Reforming of Methane
Perovskite oxides were widely used as precursors for developing metal-support type catalysts. It is attractive to explore the catalytic properties of the oxides themselves for dry reforming of methane (DRM). We synthesized LaNixCr1−xO3 (x = 0.05–0.5) samples in powder form using the sol-gel self-combustion method. Ni atoms are successfully doped into the LaCrO3 perovskite lattice. The perovskite grains are polycrystalline, and the crystallite size decreases with increasing Ni content. We demonstrated that the LaNixCr1−xO3 perovskites show intrinsically catalytic activity for DRM reactions. Reducing the Ni content is helpful to reduce carbon deposition resulting from the metal Ni nanoparticles that usually coexist with the highly active perovskite oxides. The CH4 conversion over the LaNi0.1Cr0.9O3 sample reaches approximately 84% at 750 °C, and the carbon deposition is negligible.