Xin Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xin Wang has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
Bo Kuang
1 shared publication- Bo Kuang
School of Mechanical Engineering, Shanghai Jiao Tong University, Dongchuan Rd. 800, Shanghai 200240, China
1 shared publication Chao-Hao Shang
China Nuclear Power Technology Research Institute
1 shared publicationChaohao Shang
1 shared publicationJie Ye
China Nuclear Power Technology Research Institute
1 shared publicationJieming Hou
1 shared publication
Latest Publications
- Open Access
Studying Dynamical and Hydraulic Characteristics of the Hydraulically Suspended Passive Shutdown Subassembly (HS-PSS) and Validating with a Prototypic Test Sample
The pool-type demonstrative China Fast Reactor 600 (CFR-600) adopted a series of improved safety designs, among which the hydraulic suspended passive shutdown subassembly (HS-PSS) is employed for inherent safety enhancement, especially suitable against unprotected loss of flow accident (ULOF). In this article, functional requirements for HS-PSS design in hydro-dynamic aspects are proposed, with the corresponding performance indicators discussed. To address these functional requirements, qualitative analysis on the equilibrium solution properties of the nonlinear dynamical model equation of the hydraulic moving body (HMB) in the HS-PSS are conducted, which leads to the determination of an applicable design parameter domain of the HMB for its practical design from the broad range of structural and parametric design options available for HS-PSS. Furtherly, hydraulically characterizing and modeling the constituent paths and consequent fluid network, hydraulic characteristics of the HS-PSS, as well as the coupled hydro-dynamic motion behaviors of the HMB for suspension and dropping states, were simulated and test-validated. Considering the HS-PSS hydro-dynamic behaviors, key indicators such as critical flowrate, drop time, hydraulic self-tightening performance, as well as the hydraulic characteristics curve are for fulfilling the functional requirements. Meanwhile, through sensitivity study of some structural parameters‘ impact on hydraulic characteristics, some most sensible structural parameters for adjusting and optimizing detailed design are observed. The work is quite significant in supporting the conceptual design of the HS-PSS as well as its engineering improvement.
Open AccessStudying Dynamical and Hydraulic Characteristics of the Hydraulically Suspended Passive Shutdown Subassembly (HS-PSS) and Validating with a Prototypic Test Sample
The pool-type demonstrative China Fast Reactor 600 (CFR-600) adopted a series of improved safety designs, among which the hydraulic suspended passive shutdown subassembly (HS-PSS) is employed for inherent safety enhancement, especially suitable against unprotected loss of flow accident (ULOF). In this article, functional requirements for HS-PSS design in hydro-dynamic aspects are proposed, with the corresponding performance indicators discussed. To address these functional requirements, qualitative analysis on the equilibrium solution properties of the nonlinear dynamical model equation of the hydraulic moving body (HMB) in the HS-PSS are conducted, which leads to the determination of an applicable design parameter domain of the HMB for its practical design from the broad range of structural and parametric design options available for HS-PSS. Furtherly, hydraulically characterizing and modeling the constituent paths and consequent fluid network, hydraulic characteristics of the HS-PSS, as well as the coupled hydro-dynamic motion behaviors of the HMB for suspension and dropping states, were simulated and test-validated. Considering the HS-PSS hydro-dynamic behaviors, key indicators such as critical flowrate, drop time, hydraulic self-tightening performance, as well as the hydraulic characteristics curve are for fulfilling the functional requirements. Meanwhile, through sensitivity study of some structural parameters‘ impact on hydraulic characteristics, some most sensible structural parameters for adjusting and optimizing detailed design are observed. The work is quite significant in supporting the conceptual design of the HS-PSS as well as its engineering improvement.
- 1 September 2024
- Published by Springer Nature
- p. 412-422
Study of Industrial Steam Supply on PWR Nuclear Power Plant Safety Analysis
- 1 September 2024
- Published by Springer Nature
- p. 412-422
Study of Industrial Steam Supply on PWR Nuclear Power Plant Safety Analysis
- Open Access
- 16 February 2024
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 12, 1368303
Development and preliminary verification of a 1D–3D coupled flow and heat transfer model of OTSG
Introduction: A simulation model was developed by coupling a one-dimensional (1D) system code and 3D CFD software, to analyze the three-dimensional (3D) flow and heat transfer characteristics of the once-through steam generator (OTSG).Methods: The shell side of the OTSG was simulated by FLUENT, and the tube side was simulated by the system code LOCUST. Through spatial mapping, the 1D and 3D simulations were coupled along the outer wall of the OTSG's helically coiled tubes.Results and Discussion: This coupling method enabled the acquisition of high-resolution flow and heat transfer characteristics of the OTSG, and the error of heat flux calculation result by the coupled model is within 15%. Through coupling simulation analysis of the prototype OTSG, it was found that the inlet and outlet temperature difference reached as high as 150°C. The unevenness of the radial temperature distribution increased along the flow direction, and the wake swing effect caused by the sweeping flow of the tube bundle at the exit position was evident. The results of this study provide reference and a coupled simulation method for the engineering design and thermal-hydraulic characteristics analysis of OTSG.
- 16 February 2024
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 12, 1368303
Open AccessDevelopment and preliminary verification of a 1D–3D coupled flow and heat transfer model of OTSG
Introduction: A simulation model was developed by coupling a one-dimensional (1D) system code and 3D CFD software, to analyze the three-dimensional (3D) flow and heat transfer characteristics of the once-through steam generator (OTSG).Methods: The shell side of the OTSG was simulated by FLUENT, and the tube side was simulated by the system code LOCUST. Through spatial mapping, the 1D and 3D simulations were coupled along the outer wall of the OTSG's helically coiled tubes.Results and Discussion: This coupling method enabled the acquisition of high-resolution flow and heat transfer characteristics of the OTSG, and the error of heat flux calculation result by the coupled model is within 15%. Through coupling simulation analysis of the prototype OTSG, it was found that the inlet and outlet temperature difference reached as high as 150°C. The unevenness of the radial temperature distribution increased along the flow direction, and the wake swing effect caused by the sweeping flow of the tube bundle at the exit position was evident. The results of this study provide reference and a coupled simulation method for the engineering design and thermal-hydraulic characteristics analysis of OTSG.
- 30 September 2022
- Published by Elsevier in Progress in Nuclear Energy
- Vol. 153
Natural circulation with LBE as a working substance to be published in: Progress in nuclear energy
- 30 September 2022
- Published by Elsevier in Progress in Nuclear Energy
- Vol. 153
Natural circulation with LBE as a working substance to be published in: Progress in nuclear energy