Mustafa Alas
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mustafa Alas has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Shaban Ismael Albrka Ali
Department of Civil and Construction Engineering, College of Engineering, A’Sharqiyah University, Ibra 400, Oman
6 shared publications - Taher M. Ahmed
Department of Civil Engineering, University of Anbar, Ramadi, Iraq
2 shared publications - Abdur Rahim
Department of Transportation Engineering and Management, University of Engineering and Technology, Lahore, Pakistan
1 shared publication - Ahmed Eltwati
Department of civil Engineering, University of Benghazi, Benghazi 12345, Libya
1 shared publication - Ahmed Suliman B. Ali
Universiti Teknologi MARA
1 shared publication Akmal Nizam Mohammed
Flow Analysis, Simulation, and Turbulence Research Group, Universiti Tun Hussein Onn Malaysia, 86400, Parit Raja, Batu Pahat, Johor, Malaysia
1 shared publication
Latest Publications
- 14 November 2026
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 11 (12) , 709
Improving the performance of re-compacted cold bitumen emulsion mixtures: a laboratory study on mechanical and volumetric properties
- 14 November 2026
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 11 (12) , 709
Improving the performance of re-compacted cold bitumen emulsion mixtures: a laboratory study on mechanical and volumetric properties
- Open Access
Performance of ASA Polymer-Modified Asphalt Mixtures Under Aging Conditions
The effects of weather conditions on modified asphalt mixtures were investigated in this study. Acrylonitrile Styrene Acrylate (ASA) polymer was used as a modifier with concentrations of 3, 5, and 7%. The viscosity test was performed to determine the blending and compaction temperatures for the base and modified mixtures, while Field Emission Scanning Electron Microscopy (FE-SEM) was utilized to explore the dispersion of the polymer in the asphalt binder matrix. Moreover, mechanical tests were applied to observe the changes in the modified asphalt binders. The highest improvements were obtained for a 5% ASA concentration. The resilient modulus increased by 78%, while resistance to dynamic creep improved by 74% compared with the base asphalt mixture. The wheel tracking and moisture susceptibility results further illustrated that the modified asphalt mixtures were less susceptible to moisture than the base asphalt mixture. The aging index results showed that the modifier can mitigate the effects of weather conditions, and the 5% ASA showed the best performance among the mixtures.
Open AccessPerformance of ASA Polymer-Modified Asphalt Mixtures Under Aging Conditions
The effects of weather conditions on modified asphalt mixtures were investigated in this study. Acrylonitrile Styrene Acrylate (ASA) polymer was used as a modifier with concentrations of 3, 5, and 7%. The viscosity test was performed to determine the blending and compaction temperatures for the base and modified mixtures, while Field Emission Scanning Electron Microscopy (FE-SEM) was utilized to explore the dispersion of the polymer in the asphalt binder matrix. Moreover, mechanical tests were applied to observe the changes in the modified asphalt binders. The highest improvements were obtained for a 5% ASA concentration. The resilient modulus increased by 78%, while resistance to dynamic creep improved by 74% compared with the base asphalt mixture. The wheel tracking and moisture susceptibility results further illustrated that the modified asphalt mixtures were less susceptible to moisture than the base asphalt mixture. The aging index results showed that the modifier can mitigate the effects of weather conditions, and the 5% ASA showed the best performance among the mixtures.
- Open Access
- 10 July 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (14) , 1071
Evaluations on the Properties of Polymer and Nanomaterials Modified Bitumen Under Different Aging Conditions
This research evaluates the rheological and mechanical properties of polymer- and nanomaterials-modified bitumen by incorporating nanosilica (NSA), nanoclay (NCY), and Acrylonitrile Styrene Acrylate (ASA) at 5% by weight of the bitumen. The samples were prepared at 165 °C for one hour to obtain homogeneous blends. All samples were subjected to short- and long-term aging to simulate the effects of different operating conditions. The research conducted a series of tests, including consistency, frequency sweep, and multiple creep stress and recovery (MSCR) using the dynamic shear rheometer (DSR) and bending beam rheometer (BBR). The results showed that all modified bitumen outperformed the neat bitumen. The frequency sweep showed a higher complex modulus (G*) and lower phase angle (δ), indicating enhanced viscoelastic properties and, thus, higher resistance to permanent deformation. The BBR test revealed that the bitumen modified with NCY5% has a creep stiffness of 47.13 MPa, a 51.5% improvement compared to the neat bitumen, while the NSA5% has the highest m-value, a 28.5% enhancement compared with the neat bitumen. The MSCR showed that the modified blends have better recovery properties and, therefore, better resistance to permanent deformation under repeated loadings. The aging index demonstrated that the modified bitumen is less vulnerable to aging and maintains their good flexibility and resistance to permanent deformations. Finally, these results showed that adding 5% polymer and nanomaterials improved the bitumen’s’ performance before and after aging by reducing permanent deformation and enhancing crack resistance at low temperatures, thus extending the pavement service life and making them an effective alternative for improving pavement performance in various climatic conditions and under high traffic loads.
- 10 July 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (14) , 1071
Open AccessEvaluations on the Properties of Polymer and Nanomaterials Modified Bitumen Under Different Aging Conditions
This research evaluates the rheological and mechanical properties of polymer- and nanomaterials-modified bitumen by incorporating nanosilica (NSA), nanoclay (NCY), and Acrylonitrile Styrene Acrylate (ASA) at 5% by weight of the bitumen. The samples were prepared at 165 °C for one hour to obtain homogeneous blends. All samples were subjected to short- and long-term aging to simulate the effects of different operating conditions. The research conducted a series of tests, including consistency, frequency sweep, and multiple creep stress and recovery (MSCR) using the dynamic shear rheometer (DSR) and bending beam rheometer (BBR). The results showed that all modified bitumen outperformed the neat bitumen. The frequency sweep showed a higher complex modulus (G*) and lower phase angle (δ), indicating enhanced viscoelastic properties and, thus, higher resistance to permanent deformation. The BBR test revealed that the bitumen modified with NCY5% has a creep stiffness of 47.13 MPa, a 51.5% improvement compared to the neat bitumen, while the NSA5% has the highest m-value, a 28.5% enhancement compared with the neat bitumen. The MSCR showed that the modified blends have better recovery properties and, therefore, better resistance to permanent deformation under repeated loadings. The aging index demonstrated that the modified bitumen is less vulnerable to aging and maintains their good flexibility and resistance to permanent deformations. Finally, these results showed that adding 5% polymer and nanomaterials improved the bitumen’s’ performance before and after aging by reducing permanent deformation and enhancing crack resistance at low temperatures, thus extending the pavement service life and making them an effective alternative for improving pavement performance in various climatic conditions and under high traffic loads.
- 15 November 2024
- Published by Springer Nature
- p. 104-110
Applications of Machine Learning and Deep Learning in Pavement Crack Detection and Characterisation: A Comparative Approach
- 15 November 2024
- Published by Springer Nature
- p. 104-110
Applications of Machine Learning and Deep Learning in Pavement Crack Detection and Characterisation: A Comparative Approach
- Open Access
Analysis of the Optimum Performance for Polymer and Polymer–Nanocomposite-modified Asphalt by Using Multicriteria Decision Analysis
The influence of Acrylate Styrene Acrylonitrile (ASA) and ASA/nanosilica (ASA/Si) additives was investigated by using a dynamic shear rheometer (DSR). Firstly, an ASA polymer was blended with the virgin asphalt binder at two different concentrations (3% ASA and 5% ASA). After observing that 5% ASA was the optimum concentration for modification, nanosilica particles were further incorporated into the 5% ASA-modified asphalt binder with two different percentages (5% ASA 3%Si; 5% ASA 5%Si). Frequency sweep tests were conducted across various frequencies at elevated temperatures. The experimental outcomes were analyzed using master curves, rutting, and fatigue resistance parameter plots. Additionally, to provide a more holistic analysis, two different multicriteria decision analysis (MCDA) techniques, namely the Preference Ranking Organization Method for Enrichment Evaluations (PROMETHEE) and the Technique for the Order of Preference by a Similarity to Ideal Solution (TOPSIS), were conducted to identify the best-performing asphalt binder by considering three different parameters: workability, performance under different conditions, and cost. The frequency sweep tests showed that the 5% ASA 5%Si asphalt worked best in terms of resistance to rutting. On the other hand, the virgin binder performed better than all modified binders when it failed to resist fatigue. On the other hand, the PROMETHEE analysis identified the 5% ASA-modified asphalt binder as the optimal choice, while the TOPSIS analysis determined that the 5% ASA 3%Si-modified binder provided the best performance. The differences between the experimental results and the MCDA were due to using more than one evaluation parameter and looking at how well the asphalt binder worked at different temperature ranges at the same time.
Open AccessAnalysis of the Optimum Performance for Polymer and Polymer–Nanocomposite-modified Asphalt by Using Multicriteria Decision Analysis
The influence of Acrylate Styrene Acrylonitrile (ASA) and ASA/nanosilica (ASA/Si) additives was investigated by using a dynamic shear rheometer (DSR). Firstly, an ASA polymer was blended with the virgin asphalt binder at two different concentrations (3% ASA and 5% ASA). After observing that 5% ASA was the optimum concentration for modification, nanosilica particles were further incorporated into the 5% ASA-modified asphalt binder with two different percentages (5% ASA 3%Si; 5% ASA 5%Si). Frequency sweep tests were conducted across various frequencies at elevated temperatures. The experimental outcomes were analyzed using master curves, rutting, and fatigue resistance parameter plots. Additionally, to provide a more holistic analysis, two different multicriteria decision analysis (MCDA) techniques, namely the Preference Ranking Organization Method for Enrichment Evaluations (PROMETHEE) and the Technique for the Order of Preference by a Similarity to Ideal Solution (TOPSIS), were conducted to identify the best-performing asphalt binder by considering three different parameters: workability, performance under different conditions, and cost. The frequency sweep tests showed that the 5% ASA 5%Si asphalt worked best in terms of resistance to rutting. On the other hand, the virgin binder performed better than all modified binders when it failed to resist fatigue. On the other hand, the PROMETHEE analysis identified the 5% ASA-modified asphalt binder as the optimal choice, while the TOPSIS analysis determined that the 5% ASA 3%Si-modified binder provided the best performance. The differences between the experimental results and the MCDA were due to using more than one evaluation parameter and looking at how well the asphalt binder worked at different temperature ranges at the same time.
- Open Access
- 30 June 2024
- Published by Alanya Üniversitesi in Proceedings of the International Conference of Contemporary Affairs in Architecture and Urbanism-ICCAUA
- Vol. 7 (1) , 706-717
Bridging the Gap in Traffic Safety via SWOT and TOWS Analysis within QSPM Framework
The main focus of the current study is to enhance traffic safety policies by utilizing SWOT and TOWS analyses and togain a comprehensive understanding of the challenges within traffic safety management systems. The authors haveassessed several safety measures by utilizing the Quantitative Strategic Planning Matrix. This methodology combinedexpert evaluations with a methodical investigation to determine the best ways to improve traffic safety. According tothe QSPM result, the application of sophisticated technologies in infrastructure (S6-T4), with a score of 5.88, is rankedsecond, behind traffic law enforcement (S1-O6), which has the highest score of 6.51. On the W2-T3 scale, the harmfulconsequences of inadequate access to public transportation on the usage of private vehicles received the lowest ratingof 3.98. The study's findings are significant because urban planners and legislators can use them to determine whichtraffic safety interventions should be prioritized.
- 30 June 2024
- Published by Alanya Üniversitesi in Proceedings of the International Conference of Contemporary Affairs in Architecture and Urbanism-ICCAUA
- Vol. 7 (1) , 706-717
Open AccessBridging the Gap in Traffic Safety via SWOT and TOWS Analysis within QSPM Framework
The main focus of the current study is to enhance traffic safety policies by utilizing SWOT and TOWS analyses and togain a comprehensive understanding of the challenges within traffic safety management systems. The authors haveassessed several safety measures by utilizing the Quantitative Strategic Planning Matrix. This methodology combinedexpert evaluations with a methodical investigation to determine the best ways to improve traffic safety. According tothe QSPM result, the application of sophisticated technologies in infrastructure (S6-T4), with a score of 5.88, is rankedsecond, behind traffic law enforcement (S1-O6), which has the highest score of 6.51. On the W2-T3 scale, the harmfulconsequences of inadequate access to public transportation on the usage of private vehicles received the lowest ratingof 3.98. The study's findings are significant because urban planners and legislators can use them to determine whichtraffic safety interventions should be prioritized.
- Open Access
- 7 December 2023
- Published by IOS Press
- p. 1103-1108
Investigation of Asphalt Raveling: A System Dynamic Approach
One of the factors affecting the quality of life of the citizens is the condition of the city roads; therefore, the asphalting of the roads is one of their basic needs as a facilitator of the citizens' passage. In this research, an attempt was made to model asphalt wear with a system dynamics approach and predict it for the future based on different parameters. Modelling was done and the result was with a 25% decrease or increase in the initial raveling, the rate of raveling has decreased or increased between 5% and 10%, which shows that the initial raveling is an important parameter in the rate of raveling. In the design and construction of roads, special attention should be paid to initial raveling. Therefore, it should be noted that when negative scenarios happen, they have a greater impact and cause more deterioration. In addition, due to the fact that in this modelling, more formulas are used and it is also data-oriented, the current model can be used for different regions in different countries, provided that the data and items used in the formulas (such as asphalt standards, etc.) are entered into the model based on the conditions of the studied area.
- 7 December 2023
- Published by IOS Press
- p. 1103-1108
Open AccessInvestigation of Asphalt Raveling: A System Dynamic Approach
One of the factors affecting the quality of life of the citizens is the condition of the city roads; therefore, the asphalting of the roads is one of their basic needs as a facilitator of the citizens' passage. In this research, an attempt was made to model asphalt wear with a system dynamics approach and predict it for the future based on different parameters. Modelling was done and the result was with a 25% decrease or increase in the initial raveling, the rate of raveling has decreased or increased between 5% and 10%, which shows that the initial raveling is an important parameter in the rate of raveling. In the design and construction of roads, special attention should be paid to initial raveling. Therefore, it should be noted that when negative scenarios happen, they have a greater impact and cause more deterioration. In addition, due to the fact that in this modelling, more formulas are used and it is also data-oriented, the current model can be used for different regions in different countries, provided that the data and items used in the formulas (such as asphalt standards, etc.) are entered into the model based on the conditions of the studied area.