AÜAhmet Üzün

Ahmet Üzün

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ahmet Üzün has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Enhancing Electrical and Magnetic Properties in SLA 3D Printed Resin Composites With Nano MWCNT, TiN, and c‐BN Powders

    by Mamoun Alshihabi, Mevlüt Yunus Kayacan

    This study investigates the potential applications of nanocomposites formed by integrating novel materials such as multi‐walled carbon nanotubes (MWCNT), titanium nitride (TiN), and cubic boron nitride (c‐BN) with UV resin. The objective is to explore their utilization in modern manufacturing technologies, emphasizing the development of multifunctional composites. This research addresses a critical gap where current composite materials often fail to meet the stringent performance demands for advanced electronic and magnetic applications, particularly at high frequencies. To ensure homogeneity, MWCNT, TiN, and c‐BN nano powders were thoroughly mixed with the resin. Subsequently, stereolithography (SLA) technology was used to manufacture WR‐284 electromagnetic samples from these mixtures. The results demonstrate that the 1% MWCNT sample enhances magnetic permeability (μ′) to values above 1.08 at higher frequencies and significantly reduces dielectric losses, with the imaginary part (μ″) reaching positive values up to 0.07. Similarly, the 1% c‐BN sample shows a high and stable increase in magnetic permeability, with μ′ values consistently above 1.05 and μ″ values reducing energy loss to 0.06. These findings highlight the balance between energy storage and dielectric losses across different modified samples, offering valuable insights into their potential applications. This study fills significant gaps in our understanding of material science and paves the way for innovative industrial applications, particularly in areas requiring efficient magnetic field propagation and minimal energy loss.


  • Open Access

    INVESTIGATION OF OVER OBSTACLE PERFORMANCE ANALYSIS OF AUXETIC AIRLESS TYRES

    by Ahmet Üzün, Mevlüt Yunus Kayacan

    Advancing technologies are leading to the development of airless tire designs that can perform well on challenging road conditions. These designs include lattice structures, mesh structures, and periodic structures, among others. In this study, three different tire designs were analyzed using finite element analysis (FEA) to evaluate their strength and dynamic behavior. Dynamic analyses were conducted on two commercial designs and one original design with re-entrant lattice structures. The study found that these structures are versatile as they provide multiple load paths to resist deformation and failure, and they can be modified to produce different properties like stiffness and strength. The original design with re-entrant structures demonstrated mechanical properties that were twice as good as other commercial tires. Moreover, a spline-lined structure was developed, and it was discovered that a two-stage tire design could enhance strength. The analyses were conducted at specific and controlled speeds with a designated bump size. In total, nine analyses were performed, making a significant contribution to the development of airless tire design.


  • Open Access

    Eriyik Yığma Modelleme ile Üretilen Kafes Yapılı Parçaların Bağıl Mukavemetinin İncelenmesi

    by Mevlüt Yunus Kayacan, Arda Çağatay Akçay, Emre Yilmaz, Ahmet Üzün

    Geniş kullanım alanına sahip Eklemeli İmalat yöntemlerinden Eriyik Yığma Modellemenin (EYM) tercih edilirliği gittikçe artmaktadır. Genellikle, yüksek mekanik özelliklere ihtiyaç duyulmayan, fonksiyonellik yerine kozmetik unsurların ön planda olduğu ürünlere yönelik uygulamalarda tercih edilmektedir. EYM yöntemi için geliştirilen yeni malzemelerin, elastomer ve kompozitlerle zenginleşmesi sonucunda farklı uygulama alanları da karşımıza çıkmaya başlamıştır. Bu çalışma kapsamında, standart PLA filamentlerin yanı sıra, elastomer özellikteki TPU ve kompozit yapıdaki karbon elyaf takviyeli TPU malzemelerin mekanik özelliklerine odaklanılmıştır. Farklı üretim stratejileri ve kafes yapıların kullanılması sonucunda elde edilen ürünlerin basma dayanımı ve bağıl mukavemeti araştırılmıştır. Böylece kafes yapılar ve imalat stratejileri ile düşük maliyetli ve bağıl mukavemeti yüksek yapılar daha kısa imalat sürelerinde elde edilebilmiştir. Ayrıca, özellikle TPU ve karbon elyaf katkılı TPU malzemelerin basma testleri sonucunda geri yaylanma “spring back” ile başlangıç geometrisine dönme davranışı sergilediği tespit edilmiştir.


  • Ballistic performance of novel design of bulletproof plates inspired by biomimetic approaches

    by Mevlüt Yunus Kayacan, Ahmet Üzün

    Metal and polymer matrix composite materials are preferred in bulletproof applications due to their high‐impact resistance and lightness. Personal/demand‐specific designs that have become possible with the developing additive manufacturing technologies have brought a new perspective to armor technologies. At the same time, parts with complex structures designed with biomimetic approaches can be easily manufactured with additive manufacturing. In this study, biomimetic armors obtained from standard Carbon fiber reinforced polymer (CFRP) and Inconel 718 materials were compared with traditional armor structures. Within the scope of the study, 9 × 19 mm2 parabellum and 7.62 mm NATO bullets were impacted at 275 m/s and 600 m/s speeds on biomimetic and conventional armor consisting of three and five layers. Bullet velocities during impact, deformation of bullets, deformation of armor, and harmonic behavior are discussed. The results obtained were also used to calculate the damped impact energies. In the study, it was determined that biomimetic plates could absorb 22%–38% more impact energy. It has been determined that CFRP materials can absorb 45% more impact energy compared to Inconel 718.