Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Salma Nur Zakiyyah has a total of 52 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    CRISPR/Cas12-powered electrochemical biosensor for chikungunya virus DNA detection using gold-modified screen-printed carbon electrodes

    by Clianta Yudin Kharismasari, Salma Nur Zakiyyah, Muhammad Ihda Hamlu Liwaissunati Zein, Ari Hardianto, Mara Mirasoli, Irkham, Yeni Wahyuni Hartati

    Background and purpose: Chikungunya virus (CHIKV) remains a health concern because its symptoms overlap with dengue and Zika, often leading to misdiagnosis. Conventional diagnostic methods, including viral isolation, enzyme-linked immunosorbent assay (ELISA) and reverse transcription-polymerase chain reaction (RT-PCR), are time-consuming, costly, and dependent on specialized laboratories. This study aimed to develop a rapid, selective, and sensitive electrochemical biosensor integrated with CRISPR/Cas12 for CHIKV DNA detection. Experimental approach: A CHIKV-specific guide RNA targeting a conserved region of the E1 gene was designed in silico and selected by specificity score (99.15) and E-value (1.7). The platform used a gold particle-modified screen-printed carbon electrode (SPCE/Au) functionalized with a ferrocene-labelled DNA reporter. The electrode was characterized electrochemically, and the biosensor was tested for its response to CHIKV DNA, its selectivity against dengue virus (DENV) and SARS-CoV-2, and its detection performance across target concentrations. Key results: Au deposition enhanced the electrochemical properties of the electrode. Recognition of CHIKV DNA activated the CRISPR/Cas12 complex, whose collateral cleavage of the reporter reduced the ferrocene oxidation signal. The biosensor exhibited a concentration-dependent response over 0.01 to 10 ppb, with a limit of detection of 0.92 ppb and a limit of quantification of 2.77 ppb. The biosensor showed excellent selectivity against CHIKV competitors. Conclusion: This work shows that combining CRISPR/Cas12 collateral cleavage with a ferrocene-labelled reporter on SPCE/Au enables rapid, selective, and sensitive CHIKV detection. Validation with clinical samples is still needed. The platform supports early diagnosis and disease surveillance, in line with Sustainable Development Goal (SDG) 3 (Good Health and Well-being).

  • Open Access

    Engineering affibody-based biosensing platforms for cancer biomarker detection

    by Zhafira Fauziah, Robeth Viktoria Manurung, Yuspian Nur, Dika Apriliana Wulandari, Salma Nur Zakiyyah, Irkham Irkham, Yeni Wahyuni Hartati

    Background and purpose: Cancer is one of the most life-threatening diseases and has the highest mortality rate worldwide. Delayed cancer diagnosis remains a major challenge in cancer treatment. Currently, conventional diagnostic methods still have several limitations, resulting in many cancer cases being detected only at advanced stages. Experimental approach: This review was conducted as a literature study of research on the development of affibody-based biosensors for cancer biomarker detection. The review discusses the characteristics of affibodies as bioreceptors, affibody synthesis methods, and their applications in electro­chemical and optical biosensors. Key results: Various studies have shown that affibody-based biosensors exhibit high sensitivity and specificity for detecting cancer biomarkers such as human epidermal growth factor receptor 2, tumour necrosis factor-alpha, epidermal growth factor receptor, carcinoembryonic antigen and alpha-fetoprotein. The integration of affibodies into biosensor platforms enables low detection limits, wide linear ranges and good analytical performance in biological samples. Conclusion: Affibody-based biosensors show great potential as platforms for cancer diagnosis. The use of affibodies as bioreceptors offers several advan­tages over antibodies and aptamers, particularly ease of synthesis, high stability and strong binding affinity.


  • Advances in biosensor technologies for early diagnosis of preeclampsia through molecular biomarkers

    by Biyas Aurora Nania Nevada, Salma Nur Zakiyyah, Clianta Yudin Kharismasari, Nelson Indarto Suwarno, Qorinah Estiningtyas Sakilah Adnani, Mas Rizky Anggun Adipurna Syamsunarno, Muhammad Alamsyah Aziz, Yeni Wahyuni Hartati, Irkham

  • Open Access

    Parameter selection of cerium oxide anodic electrodeposition on screen-printed carbon electrodes using response surface methodology for nucleic acid based biosensors

    by Clianta Yudin Kharismasari, Ari Hardianto, Muhammad Ihda Hamlu Liwaissunati Zein, Salma Nur Zakiyyah, Yeni Wahyuni Hartati, Irkham

    Screen-printed carbon electrodes (SPCEs) modified with cerium oxide (ceria) have attracted considerable attention due to their outstanding stability and electrochemical performance, making them promising candidates for sensor and biosensor applications. However, the anodic electrodeposition of ceria on SPCEs involves multiple parameters that may strongly influence film formation and electrochemical behaviour, yet these factors have not been systematically optimized. This study aimed to determine and optimize the key parameters affecting anodic electrodeposition of ceria on SPCEs using cyclic voltammetry (CV) and res­ponse surface methodology. All four main parameters, namely UV irradiation time, distance between the SPCE and UV lamp, cerium nitrate concentration and the number of CV cycles, significantly influence the anodic electrodeposition process of ceria, shown by the statistical analysis (p <0.05). The optimized SPCE/ceria electrode exhibited improved electrochemical performance, with an average peak current of 44.158 μA and a relative standard deviati-on (RSD) of 2.68 %. This optimized SPCE/ceria was subsequently tested for guanine oxide­tion using differential pulse voltammetry with an immobilized RNA probe and produced good repeatability with an RSD value of 2.37 %. The findings underscore the importance of parameter optimization to enhance the reproducibility and sensitivity of SPCE/ceria electrodes, demonstrating their strong potential for future biosensing applications.


  • CRISPR-Cas13a–Powered Electrochemical Biosensor for Label-Free Detection of Chikungunya Virus RNA Using a Ceria-Modified Screen-Printed Carbon Electrode

    by Salma Nur Zakiyyah, Irkham, Dika Apriliana Wulandari, Muhammad Ihda Hamlu Liwaissunati Zein, Shabarni Gaffar, Mehmet Ozsoz, Genki Ogata, Yasuaki Einaga, Yeni Wahyuni Hartati

    This study aims to develop a label-free electrochemical biosensor for the detection of chikungunya virus (CHIKV) RNA, based on CRISPR-Cas13a integrated with a cerium oxide (ceria)-modified screen-printed carbon electrode (SPCE). The ceria film was deposited through cathodic electrodeposition, forming a uniform, needle-like film, as observed by SEM, and a crystalline fluorite structure was confirmed by XRD with characteristic (111), (200), and (220) reflections. The results showed that Raman spectroscopy demonstrated a dominant F2g band at ∼463 cm-1, indicative of cubic ceria, while XPS analysis displayed the presence of 13.65% Ce3+, contributing to favorable surface reactivity for biomolecule immobilization. This interface enhanced the attachment of a biotinylated RNA probe through streptavidin binding. Furthermore, a guide RNA (gRNA) was rationally designed to target the conserved region of the CHIKV E1 gene, with high specificity confirmed through in silico arrangement against related viruses. Upon target recognition, the activated Cas13a enzyme triggered collateral cleavage of the immobilized probe, leading to a measurable reduction in the guanine oxidation signal, detected by differential pulse voltammetry (DPV). This detection strategy was entirely label-free and amplification-free, simplifying both sensor fabrication and operation. The biosensor achieved a detection limit of 1.325 ppt, had a linear response in the range of 1-10,000 ppt, and showed excellent selectivity against DENV and SARS-CoV-2. It also retained signal stability over 45 days and yielded a recovery rate of 94.98% in spiked human serum. In conclusion, this study represents a modular and programmable sensing platform for direct RNA detection that integrates RNA-guided molecular recognition and signal transduction without the need for labeled substrates or amplification, simplifying CRISPR-based diagnostics supporting good health and well-being through field-deployable applications.


  • Open Access

    Porcine gelatine detection via electrochemical immunosensors utilizing green-synthesized cerium oxide nanoparticles from orange peel

    by Rafa Radithya Swara, Nazwa Alya Zahra, Dea Hasna Tsary, Biyas Aurora Nania Nevada, Elisabeth Nasya Dominika Setyawati Putri, Salma Nur Zakiyyah, Yohanes Susanto Ridwan, Yeni Wahyuni Hartati, Irkham Irkham

    Maintaining the safety and proper labelling of food products is vital for communities around the world. One of the primary concerns in food safety is the unintentional presence of porcine derivatives such as gelatine in food products. This issue could affect the labelling accuracy of food products, religious dietary observances, regulatory compliance, and public health. Electrochemical immunosensors address this issue by rapidly, portably, and especially with high sensitivity, detecting porcine gelatine. The electrode was modified with CeO2 nanoparticles (NPs) synthesized via a green method using orange peel extract, which enhanced the immobilization of the bioreceptor on the electrode surface. Orange peel extract contains secondary metabolites that can act as stabilizing agents and prevent agglomeration during the synthesis process. The synthesized CeO2 NPs show a cube morphology, producing an average particle size of 12 nm with 77.31 % crystallinity. The performance of green synthesized CeO2 NPs modified electrode are successful for detecting porcine gelatine in solution and commercialized gelatine product, resulting in a limit of detection of 3.53 ppm. These results show the potential of green-synthesized CeO2 NPs for an electrochemical immunosensor for detecting porcine products.


  • Open Access

    CRISPR-Cas9-based electrochemical biosensor for the detection of katG gene mutations in isoniazid-resistant tuberculosis

    by Dika Apriliana Wulandari, Muhammad Ihda Hamlu Liwaissunati Zein, Salma Nur Zakiyyah, Safri Ishmayana, Mehmet Ozsoz, Yeni Wahyuni Hartati

    Background and purpose: Multidrug-resistant tuberculosis (MDR-TB) remains a significant challenge in tuberculosis (TB) treatment, driven by simultaneous mutations in the rpoB and katG genes that confer resistance to rifampicin and isoniazid. While many molecular diagnostic tools focus on rpoB, the katG gene is often overlooked despite its critical role in confirming MDR-TB. This study aims to develop a CRISPR/Cas9-based electrochemical biosensor for the rapid and selective detection of katG mutation. Experimental approach: A guide RNA (gRNA) specific to the mutation site on katG gene was designed using the Benchling CRISPR tool, considering on-target and off-target scores, specificity, and cleavage sites within the Mycobacterium tuberculosis genome. The selected gRNA achieved the highest on-target score of 61.2 and an off-target score of 49.0 at cut position 2928, with a PAM sequence of AGG. Its cleavage efficiency was validated experimentally using an electrochemical biosensing platform incorporating a gold-modified screen-printed carbon electrode (SPCE/Au). Redox response enhancement by [Fe(CN6)]3-/4- confirmed the improved performance of the electrode. Key results: The biosensor system detects the target DNA through hybridization with DNA probe-Fc, forming double-stranded DNA (dsDNA) that is recognized and cleaved by the Cas9/gRNA complex. This cleavage significantly reduces the ferrocene oxidation signal, indicating the presence of a katG mutation. Non-mutated target DNA produces a nondetectable ferrocene signal, suggesting that the Cas9 enzyme may remain bound to the electrode without cleavage. The CRISPR/Cas9 electrochemical biosensor demonstrated a low detection limit of 7.5530 aM and a detection range of 101 to 106 aM. Conclusion: The CRISPR/Cas9-based electrochemical biosensor exhibits high sensitivity and specificity for the detection katG mutation, offering a promising platform for rapid MDR-TB diagnostics.


  • Open Access

    Label-free electrochemical immunosensor for porcine gelatin using a boron-doped diamond electrode via diazonium salt electrografting

    by Irkham Irkham, Fadli Taufik Abdillah, Muhammad Ihda H. L. Zein, Adisyahputra, Nazwa Alya Zahra, Salma Nur Zakiyyah, Yeni Wahyuni Hartati

    Porcine gelatin is widely used in the food and pharmaceutical industries due to its favorable functional properties and low cost. However, its presence in consumer products raises serious concerns for individuals with dietary restrictions based on religious, ethical, or health considerations. In this study, a label-free electrochemical immunosensor was developed using a boron-doped diamond electrode modified with aryl diazonium salt for the selective and sensitive detection of porcine gelatin. The diazonium electrografting enabled stable covalent immobilization of anti-porcine gelatin antibodies via protein A, preserving anti­body orientation and activity. Experimental parameters were optimized using the Box-Behnken design, yielding ideal conditions of 500× antibody concentration, 60 min antibody incubation, and 15 min gelatin incubation. Detection was performed using differential pulse voltammetry with [Fe(CN)₆]3-/4- as a redox probe, allowing label-free monitoring of anti­body-antigen interactions based on changes in current. The immunosensor demonstrated excellent analytical performance, with a detection limit of 142.15 pg mL-1. Specificity testing confirmed that the sensor responds exclusively to porcine gelatin, showing no cross-reactivity with bovine gelatin. These results demonstrate that the proposed immunosensor provides a rapid, highly sensitive, and specific platform for porcine gelatin detection, offering great potential for food authentication and halal verification.


  • Open Access

    Gold nanoparticle-modified screen-printed carbon electrodes for label-free detection of SARS-CoV-2 RNA using drop casting and spray coating methods

    by Salma Nur Zakiyyah, Nadya Putri Satriana, Natasha Fransisca, Shabarni Gaffar, Norman Syakir, Irkham Irkham, Yeni Wahyuni Hartati

    Background and purpose: This study aimed to explore the modification of screen-printed carbon electrode (SPCE) to produce an extensive conductive surface with gold nanoparticles (AuNPs) for the detection of Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) ribonucleic acid (RNA). Experimental approach: The experiment was carried out using drop casting (DC) and spray coating (SC) methods. Au-S covalent interactions were formed between thiolated single-stranded DNA (ssDNA ) and Au surface, which further hybridized with the target RNA to be detected using differential pulse voltammetry (DPV). Optimization of experimental conditions was performed using Box-Behnken design (BBD) on probe ssDNA concentration, probe ssDNA immobilization time, and target hybridization time. The morphology of the modified electrode was characterized using a scanning electron microscope, while the electrochemical behaviour was determined with DPV and electron impedance spectroscopy. Key results: The results showed that SPCE modification with AuNPs by DC produced a higher peak current height of 12.267 μA with an Rct value of 2.534 kΩ, while SC improved the distribution of AuNPs in the electrode surface. The optimum experimental conditions obtained using BBD were 0.5 µg mL-1 ssDNA-probe concentration, an immobi¬liza¬tion time of 22 minutes, and a hybridization time of 12 minutes. The limit of SARS-CoV-2 RNA detection at a concentration range of 0.5 to 10 μg mL-1 was 0.1664 and 0.694 μg mL-1 for DC and SC, respectively. The T-test results for both methods show that the current response of target RNA with SPCE/AuNP by DC does not show the same result, indicating a significant difference in the current response between those two methods. Conclusion: SPCE/AuNP by DC is better than SPCE/AuNP by SC for immobilizing inosine-substituted ssDNA, which subsequently hybridizes with viral RNA, enabling label-free detection of guanine from SARS-CoV-2 RNA.


  • From nanotechnology to AI: The next generation of CRISPR-based smart biosensors for infectious disease detection

    by Irkham, Abdullahi Umar Ibrahim, Chidi Wilson Nwekwo, Pwadubashiyi Coston Pwavodi, Salma Nur Zakiyyah, Mehmet Ozsoz, Yeni Wahyuni Hartati