Phuoc Quy Phong Nguyen
Phuoc Quy Phong Nguyen has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Nguyen Dang Khoa Pham
Ho Chi Minh City University of Transport
3 shared publications Viet Dung Tran
3 shared publications- Prabhakar Sharma
Department of Mechanical Engineering, Delhi Skill and Entrepreneurship University, Delhi, India
2 shared publications Thanh Hai Truong
2 shared publications- Viet Dung Tran
University of Transport Ho Chi Minh City
2 shared publications - Wieslaw Tarelko
Faculty of Ocean Engineering and Ship Technology, Gdansk University of Technology, Gdansk, Poland
2 shared publications
Latest Publications
- Open Access
- 18 November 2025
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 32 (4) , 168-186
Next-gen marine safety: Real-time automated oil spill detection and monitoring with IoT and transfer learning
Marine oil spills pose a severe and persistent threat to ecosystems and coastal economies. Traditional manual or satellite detection is slow, laborious, and error-prone due to sensor limitations, noise, weather interference, small target sizes, and imbalanced datasets. To address these challenges, this paper proposes a novel, integrated framework for the rapid detection and monitoring of oil spills by using the Internet of Things, unmanned vehicles, and transfer learning. The proposed system uses a multi-layered architecture: a physical layer of visual, infrared, and acoustic sensors deployed on a network of Saildrone unmanned surface vehicles for real-time data acquisition; an edge layer for initial processing and low-latency response; and a cloud layer that uses deep transfer learning for accurate spill identification and classification. We fine-tuned pre-trained ResNet models using a Synthetic Aperture Radar oil spill dataset, achieving a peak accuracy of 97.89% with a three-layer transfer learning configuration, outperforming other tested configurations. The efficiency of the system in real-time data handling and leak localization was validated through a controlled experimental prototype. The results demonstrated a robust solution for minimizing response time and environmental impact. Our framework has been proven to gain about 98.3% model accuracy on drone images for oil spill detection.
- 18 November 2025
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 32 (4) , 168-186
Open AccessNext-gen marine safety: Real-time automated oil spill detection and monitoring with IoT and transfer learning
Marine oil spills pose a severe and persistent threat to ecosystems and coastal economies. Traditional manual or satellite detection is slow, laborious, and error-prone due to sensor limitations, noise, weather interference, small target sizes, and imbalanced datasets. To address these challenges, this paper proposes a novel, integrated framework for the rapid detection and monitoring of oil spills by using the Internet of Things, unmanned vehicles, and transfer learning. The proposed system uses a multi-layered architecture: a physical layer of visual, infrared, and acoustic sensors deployed on a network of Saildrone unmanned surface vehicles for real-time data acquisition; an edge layer for initial processing and low-latency response; and a cloud layer that uses deep transfer learning for accurate spill identification and classification. We fine-tuned pre-trained ResNet models using a Synthetic Aperture Radar oil spill dataset, achieving a peak accuracy of 97.89% with a three-layer transfer learning configuration, outperforming other tested configurations. The efficiency of the system in real-time data handling and leak localization was validated through a controlled experimental prototype. The results demonstrated a robust solution for minimizing response time and environmental impact. Our framework has been proven to gain about 98.3% model accuracy on drone images for oil spill detection.
- Open Access
- 1 January 2025
- Published by Center of Biomass and Renewable Energy Scientia Academy in International Journal of Renewable Energy Development
- Vol. 14 (2) , 214-223
Application of response surface methodology to optimize the dual-fuel engine running on producer gas
This work develops a computational framework that optimizes the performance and emissions of a dual-fuel diesel engine running on biomass-derived producer gas as the main fuel and diesel as the pilot fuel. The study connects essential responses, brake thermal efficiency, peak combustion pressure, and emissions of nitrogen oxides (NOx), carbon monoxide (CO), and unburnt hydrocarbon (HC) with controllable factors like engine load and pilot fuel injection duration. The approach consists of simulating the impacts of these controllable inputs on engine performance, then optimization to find the optimal fuel injection pressure to balance performance and emissions. The results show that engine load considerably affects NOx emissions and brake thermal efficiency; greater loads lower CO emissions but raise HC emissions at low compression ratios. Although it had little effect on NOx emissions, fuel injection pressure was vital in balancing general engine performance. Using optimization, an optimal fuel injection pressure value of 218.5 bar was identified, thereby producing a brake thermal efficiency of 27.35% and lowering emissions to 80 ppm HC, 202 ppm NOx, and 92 ppm CO. This computational method offers a strategic means for improving the efficiency of dual-fuel engines while reducing their environmental impact, hence guiding more sustainable and effective engine operation.
- 1 January 2025
- Published by Center of Biomass and Renewable Energy Scientia Academy in International Journal of Renewable Energy Development
- Vol. 14 (2) , 214-223
Open AccessApplication of response surface methodology to optimize the dual-fuel engine running on producer gas
This work develops a computational framework that optimizes the performance and emissions of a dual-fuel diesel engine running on biomass-derived producer gas as the main fuel and diesel as the pilot fuel. The study connects essential responses, brake thermal efficiency, peak combustion pressure, and emissions of nitrogen oxides (NOx), carbon monoxide (CO), and unburnt hydrocarbon (HC) with controllable factors like engine load and pilot fuel injection duration. The approach consists of simulating the impacts of these controllable inputs on engine performance, then optimization to find the optimal fuel injection pressure to balance performance and emissions. The results show that engine load considerably affects NOx emissions and brake thermal efficiency; greater loads lower CO emissions but raise HC emissions at low compression ratios. Although it had little effect on NOx emissions, fuel injection pressure was vital in balancing general engine performance. Using optimization, an optimal fuel injection pressure value of 218.5 bar was identified, thereby producing a brake thermal efficiency of 27.35% and lowering emissions to 80 ppm HC, 202 ppm NOx, and 92 ppm CO. This computational method offers a strategic means for improving the efficiency of dual-fuel engines while reducing their environmental impact, hence guiding more sustainable and effective engine operation.
- Open Access
- 26 November 2023
- Published by Center of Biomass and Renewable Energy Scientia Academy in International Journal of Renewable Energy Development
- Vol. 13 (1) , 110-121
Numerical and experimental investigations on a bladeless turbine: Tesla's cohesion-type innovation
The design, numerical simulation, manufacturing, and physical experimentation of Tesla's bladeless centripetal turbine for electrical power production are the topics of this research project. The turbine generates rotational motion in the discs by directing pressurized air and water tangentially across parallel smooth disc surfaces. The fluid speed parameter at the nozzle inlet determines the power generated. To ensure optimal mechanical design parameters, SolidWorks design software, fluid dynamics concepts, and machine element design were employed. The numerical simulation software ANSYS CFX was used. The numerical and qualitative findings of the models and physical experiments coincided well. The study revealed that the power production and turbine efficiency were regulated by the input sources and blade size. Variations in the fluid composition between the discs may additionally have an impact on the outcomes. The researchers investigated the connection between input fluid pressure and turbine efficiency, as well as the number of discs and turbine power. The prototype could generate 76.52 W of electricity at 50 bar pressure and 1.01e+05 Reynolds number. The operation was efficiently simulated using CFD, with only a 9.3% difference between experimental and simulated results. Overall, this research provides an in-depth assessment of Tesla's bladeless centripetal turbine. It verifies the design and numerical simulation methodologies used, as well as identifies the essential aspects impacting turbine performance and efficiency. The findings contribute to a better understanding of the turbine's behavior and give ideas for improving its performance.
- 26 November 2023
- Published by Center of Biomass and Renewable Energy Scientia Academy in International Journal of Renewable Energy Development
- Vol. 13 (1) , 110-121
Open AccessNumerical and experimental investigations on a bladeless turbine: Tesla's cohesion-type innovation
The design, numerical simulation, manufacturing, and physical experimentation of Tesla's bladeless centripetal turbine for electrical power production are the topics of this research project. The turbine generates rotational motion in the discs by directing pressurized air and water tangentially across parallel smooth disc surfaces. The fluid speed parameter at the nozzle inlet determines the power generated. To ensure optimal mechanical design parameters, SolidWorks design software, fluid dynamics concepts, and machine element design were employed. The numerical simulation software ANSYS CFX was used. The numerical and qualitative findings of the models and physical experiments coincided well. The study revealed that the power production and turbine efficiency were regulated by the input sources and blade size. Variations in the fluid composition between the discs may additionally have an impact on the outcomes. The researchers investigated the connection between input fluid pressure and turbine efficiency, as well as the number of discs and turbine power. The prototype could generate 76.52 W of electricity at 50 bar pressure and 1.01e+05 Reynolds number. The operation was efficiently simulated using CFD, with only a 9.3% difference between experimental and simulated results. Overall, this research provides an in-depth assessment of Tesla's bladeless centripetal turbine. It verifies the design and numerical simulation methodologies used, as well as identifies the essential aspects impacting turbine performance and efficiency. The findings contribute to a better understanding of the turbine's behavior and give ideas for improving its performance.
- 29 September 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 49, 868-909
Performance and emission characteristics of diesel engines running on gaseous fuels in dual-fuel mode
- 29 September 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 49, 868-909
Performance and emission characteristics of diesel engines running on gaseous fuels in dual-fuel mode
- Top Cited Papers
- 19 August 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 54, 791-816
Fueling the future: A comprehensive review of hydrogen energy systems and their challenges
- 19 August 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 54, 791-816
Top Cited PapersFueling the future: A comprehensive review of hydrogen energy systems and their challenges
- Open Access
- 1 June 2023
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 30 (2) , 146-164
Understanding Fuel Saving and Clean Fuel Strategies Towards Green Maritime
Due to recent emission-associated regulations imposed on marine fuel, ship owners have been forced to seek alternate fuels, in order to meet the new limits. The aim of achieving low-carbon shipping by the year 2050, has meant that alternative marine fuels, as well as various technological and operational initiatives, need to be taken into account. This article evaluates and examines recent clean fuels and novel clean technologies for vessels. The alternative fuels are classified as low-carbon fuels, carbon-free fuels, and carbon neutral fuels, based on their properties. Fuel properties, the status of technological development, and existing challenges are also summarised in this paper. Furthermore, researchers have also investigated energy-saving devices and discovered that zero-carbon and virtually zero-carbon clean fuels, together with clean production, might play an important part in shipping, despite the commercial impracticability of existing costs and infrastructure. More interestingly, the transition to marine fuel is known to be a lengthy process; thus, early consensus-building, as well as action-adoption, in the maritime community is critical for meeting the expectations and aims of sustainable marine transportation.
- 1 June 2023
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 30 (2) , 146-164
Open AccessUnderstanding Fuel Saving and Clean Fuel Strategies Towards Green Maritime
Due to recent emission-associated regulations imposed on marine fuel, ship owners have been forced to seek alternate fuels, in order to meet the new limits. The aim of achieving low-carbon shipping by the year 2050, has meant that alternative marine fuels, as well as various technological and operational initiatives, need to be taken into account. This article evaluates and examines recent clean fuels and novel clean technologies for vessels. The alternative fuels are classified as low-carbon fuels, carbon-free fuels, and carbon neutral fuels, based on their properties. Fuel properties, the status of technological development, and existing challenges are also summarised in this paper. Furthermore, researchers have also investigated energy-saving devices and discovered that zero-carbon and virtually zero-carbon clean fuels, together with clean production, might play an important part in shipping, despite the commercial impracticability of existing costs and infrastructure. More interestingly, the transition to marine fuel is known to be a lengthy process; thus, early consensus-building, as well as action-adoption, in the maritime community is critical for meeting the expectations and aims of sustainable marine transportation.
- Top Cited Papers
- 21 May 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 54, 127-160
Recent advances in hydrogen production from biomass waste with a focus on pyrolysis and gasification
- 21 May 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 54, 127-160
Top Cited PapersRecent advances in hydrogen production from biomass waste with a focus on pyrolysis and gasification
- 6 October 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 48 (18) , 6722-6737
Flexible syngas-biogas-hydrogen fueling spark-ignition engine behaviors with optimized fuel compositions and control parameters
- 6 October 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 48 (18) , 6722-6737
Flexible syngas-biogas-hydrogen fueling spark-ignition engine behaviors with optimized fuel compositions and control parameters