JYJinlong Yang

Jinlong Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jinlong Yang has a total of 262 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Dual‐Pronged Strategy for Practical H 2 O 2 Electrosynthesis: Cross‐Scale Engineering of Nanocarbon Catalysts

    by Lingyan Jing, Wanyue Yuan, Yan Li, Zehua Zheng, Aokang Li, Kunlin Xie, Leyang Li, Xiaojing Huang, Qiang Tian, Jinlong Yang, et al.

    Both the atomic‐/molecular‐scale active sites and the mesoscopic mass transfer properties jointly govern the overall performance of catalytic materials. In this work, we propose a dual‐pronged strategy that integrates heteroatom doping with micro/nano‐scale structural design, thereby optimizing surface carbonaceous active sites and mesoscale mass transport, ultimately enabling the development of a mesoporous carbon‐based catalyst for practical electrochemical H 2 O 2 synthesis. Impressively, the optimized nanocatalyst exhibits high electrocatalytic activity and selectivity (> 95% at pH 13 and > 90% at pH 7) toward H 2 O 2 , facilitating the production of H 2 O 2 solution at industrial‐related current densities in flow‐cell systems and making it suitable for applications such as pulp bleaching and medical‐grade disinfection. Mechanistically, we propose that sulfur heteroatoms modulate the binding energy of *OOH intermediates on the carbonaceous surface, thereby enhancing H 2 O 2 formation; besides, the mesoscopic geometric structure with a hollow interior and mesoporous channels ensures sufficient O 2 supply and a hydrated environment, supporting mass transfer‐enhanced H 2 O 2 generation. The dual‐pronged strategy presented here offers a new framework for designing catalytic platforms aimed at cross‐scale process intensification in the electrocatalytic small molecule conversion.

  • Open Access

    A Safety‐Engineered Organic–Inorganic Composite Separator Enabling Fire‐Extinguishing and Dendrite‐Free Lithium Metal Battery Operation

    by Yichuan Dai, Mingyan Chuai, Xinyu Deng, Zigeng Wu, Yongjie Feng, Dingyi Zhou, Yihang Gan, Xun Wang, Jidan Xing, Chuye Pan, et al.

    The limited thermal stability, mechanical fragility, and flammability of polyolefin separators impose inherent constraints on the safety and lifespan of lithium metal batteries. Although surface‐coating strategies have been widely explored, single‐component coatings, for example, Al 2 O 3 or polyimide, are unable to simultaneously address dendrite suppression, anti‐thermal shrinkage, and flame retardant. Given these critical challenges, we report a design strategy of multifunctional organic‐inorganic composite separator: (a) an ammonium polyphosphate and poly(acrylic acid) cross‐linked polymer provides intrinsic fire‐retardant behavior and features an electrolyte‐philic characteristic that facilitates Li‐ion transport; (b) a rigid Al 2 O 3 network embedded in the polymer matrix resists thermal shrinkage and blocks dendrite penetration through synergistic SEI protection layers rich in Li 3 N and Li 3 PO 4 . Together, these synergistic functions enable Li||Li cells to cycle stably for 2000 h and deliver long‐term stability in LFP||Li full cells (88% capacity retention over 1000 cycles). Moreover, the average heat release rate per unit area (0.04°C min −1 cm −2 ) of this battery during thermal runaway is markedly suppressed compared to those (0.3°C min −1 cm −2 ) of batteries using polyolefin separators, pouch cells incorporating this separator consistently exhibit rapid self‐extinguishing behavior during repeated ignition tests. This integrated safety‐centric architecture offers a practical pathway towards intrinsically safe, long‐life lithium metal batteries.

  • Open Access

    Mechanically, Thermally, and Interfacially Robust Solid Polymer Electrolytes Enabled by an Organic–Inorganic Interwoven Architecture

    by Zhilong Yang, Chuang Li, Chengshuai Chang, Bosi Huang, Lu Nie, Zhengran Wang, Yiming Zhang, Zijun Li, Lisi Xu, Yanfei Huang, et al.

    Solid polymer electrolytes (SPEs) are promising for use in high‐energy‐density solid‐state Li metal batteries. However, their practical application is hindered by challenges including poor mechanical strength, inadequate thermal stability, electrode‐interface instability, and sluggish ionic transport, which collectively fall short of the required safety and performance standards. Here, we develop an organic–inorganic interwoven architecture using PBO nanofiber and MXene nanosheets as a multifunctional host for SPE. This interwoven framework enhances the mechanical strength and toughness of the solid electrolyte by 12.5‐ and 7‐fold, respectively, and reduces thermal shrinkage below 10% at 200°C. More importantly, we demonstrate that the interwoven structure promotes Li salt dissociation through strong local electric‐field polarization, accelerates Li‐ion transport (0.75 mS cm −1 ), and enhances the stability (8000 h without short‐circuiting) of the Li metal interface during battery operation while suppressing exothermic side reactions under extreme thermal runaway conditions. Using this strategy, solid‐state Li metal pouch cells operate stably under mechanical and thermal abuse conditions, delivering 91.7% capacity retention after 300 cycles at 10C and 90°C. This work effectively addresses the interrelated challenges of mechanical strength, ion transport, and interface/thermal stability of SPE, offering a promising strategy for safe and high‐performance solid‐state Li metal batteries.

  • Breaking the Activity–Stability Trade-Off of Li-CO 2 Batteries: Covalency-Driven Reconstruction on Cobalt-Based Catalysts

    by Xin Tao, Min Wang, Hongtai Li, Yingqi Liu, Yanli Chen, Yanze Song, Bingyi Lu, Zhilong Yang, Lina Li, Jinlong Yang, et al.

    Developing highly efficient catalysts is crucial for Li-CO2 batteries to achieve superior performance, offering significant benefits of CO2 utilization and energy conversion. However, accurately elucidating the structure-activity relationships of catalysts under operating conditions remains a major challenge. The limited understanding derived solely from catalysts' pristine states hinders the rational optimization of catalytic systems. Here, by monitoring the structural reconstruction and the evolving Co ligand environments in CoX (X = O, S, and Se) precatalysts during operation, we establish the structure-activity relationship and reveal the regulatory role of precatalyst covalency in governing the catalytic activity and stability of Li-CO2 batteries. We found that the reconstruction behavior of the catalysts is fundamentally determined by the catalysts' covalency, which governs the oxidation thermodynamics that ultimately drive the structural evolution. CoS, with the weakest covalency, suffers from detrimental complete reconstruction, transforming into a fully oxidized phase CoO during cycling, ultimately resulting in the rapid failure of polarization voltage exceeding 2 V after 200 h of cycling. In contrast, CoSe, with stronger covalency, undergoes confined partial reconstruction to form a CoSe/CoO heterophase interface on the local surface, which protects active sites and facilitates electron transfer. This partial reconstruction strategy successfully breaks the activity-stability trade-off. The CoSe-based battery demonstrates both high activity and stability, maintaining a polarization voltage of 0.96 V with an energy efficiency exceeding 80% after 736 h of continuous cycling. This work reveals the structure-activity correlations dominated by covalency in Li-CO2 batteries and provides insights into designing durable and high-efficiency catalysts by inducing partial reconstruction.

  • Open Access

    Laser-engraved graphene architecture as an ultra-light freestanding lithium-free anode for lithium batteries

    by Jinze He, Lun Li, Rui Tan, Huazhang Zhang, Jie Wen, Mingxuan Wu, Chao Yin, Lai Tong, Lvping Fu, Biao Gao, et al.

    Breakthroughs in high-capacity anodes represent a critical frontier in the development of next-generation high-specific-energy storage systems. However, the current high-capacity anodes of lithium batteries are confronted with numerous challenges, including uncontrolled volume expansion, lithium dendrite growth, dead lithium, and unstable SEI films. Herein, we firstly employ laser engraving technology to fabricate an ultra-light freestanding graphene film with through-hole array and defect-rich edges, which serves as a lithium-free anode that integrates lithium-ion intercalation and metallic lithium deposition. During discharge, the defect structures at the pore edges facilitate the adsorption of lithium ions and their rapid intercalation between graphene layers, forming the LiCx framework. This enables the conversion of quasi-dead lithium through the solid-state pathway of Li → LiCx → Li+. Simultaneously, the vertically aligned through-holes homogenize ion flux and promote metallic lithium storage within the pores, thereby achieving high areal capacity, excellent reversibility, dendrite-free growth, and minimal volume change. As a result, this ultra-light freestanding lithium-free graphene anode (FLFGA) achieves highly reversible Li storage with 99.9% CE over 1300 cycles and dendrite-free plating/stripping at a high areal capacity of 4 mAh cm-2 (1350 mAh g-1 anode). When paired with a high-loading LiFePO4 (LFP) cathode (11.5 mg cm-2), the FLFGA||LFP full cell exhibits significantly enhanced cycling stability (500 cycles), outperforming most conventional Li metal battery, lean-Li battery and anode-free Li battery systems. This work demonstrates a viable lithium-free anode strategy via laser-engraved graphene engineering, paving the way for durable, safe, and high-energy-density Li batteries.


  • Open Access

    Ultra‐Low Loading Pseudo‐Single‐Crystal Mesoporous PtPd Catalysts for High‐Performance Hydrogen Gas Batteries

    by Guili Zhao, Hongxu Liu, Chuye Pan, Xiang Chu, Taoli Jiang, Yidi Wang, Shunxin Tan, Zhonglin Li, Lidong Sun, Yirui Ma, et al.

    Rechargeable hydrogen gas batteries show a great promise for large‐scale energy storage due to their high safety, environmental friendliness, high efficiency and long‐cycle life. However, the costly catalysts at the anode for hydrogen oxidation/evolution reactions (HOR/HER) hinder the practicability. Here, we report a pseudo‐single‐crystal mesoporous (PSCM) PtPd catalyst with high HOR/HER bifunctional activities for high‐performance hydrogen gas batteries. It exhibits an outstanding HOR activity with a kinetic current density of 3.10 A mg −1 and an HER overpotential of 34.8 mV at 10 mA cm −2 , outperforming commercial Pt/C (0.42 A mg −1 , 79.3 mV). When assembling Ni‐H 2 battery with a low PSCM‐PtPd catalyst loading of ∼45 µg cm −2 , it displays a high energy efficiency of ∼85% and cycling stability of >1000 cycles. Even at an ultra‐low catalyst loading of ∼10 µg cm −2 , the Ni‐H 2 (PSCM‐PtPd) battery still exhibits an energy density of ~135 Wh kg −1 and durability of >1000 cycles with a cell cost of ~105 $ kWh −1 , much better than that of Pt/C‐based battery (>700 $ kWh −1 ). We demonstrate that the superior activity of the PSCM‐PtPd catalyst originates from the charge transfer from Pd to Pt and lattice distortion caused by Pd incorporation, and the enhanced stability is attributed to its fewer grain boundaries and stable attachment to the electrode. This work offers a promising pathway toward designing cost‐effective and scalable energy storage systems.


  • Open Access

    High‐Performance Solid‐State Lithium Batteries via Dipole‐Matching: Enabling Compact Polymer Microstructure and Stable Interfaces

    by Ya Song, Haotian Qu, Bosi Huang, Jie Tang, Yanfei Zhu, Wenqiang Fang, Zijun Li, Zhoujie Lao, Zhuozhao Wu, Xian Wu, et al.

    Solid polymer electrolytes (SPEs) show great promise for solid‐state lithium metal batteries but face challenges due to inherently slow ion transport and interfacial instability. In this work, we propose a dipole‐matching strategy to engineer an SPE with a compact microstructure and stabilized interfaces. Through combined theoretical and experimental studies, we identify a molecular additive, such as 3,5‐bis(trifluoromethyl)benzoic acid (N‐CFF), that promotes rapid and uniform nucleation and directs phase alignment via dipole interactions with polymer chains, resulting in a compact microstructure conducive to rapid lithium‐ion transport and homogeneous deposition. Simultaneously, the dipole‐matched N‐CFF creates an electron‐rich environment that facilitates the formation of a LiF‐rich solid electrolyte interphase, effectively suppressing lithium dendrite growth. Employing this strategy, we fabricate Li||LiFePO 4 solid‐state batteries that deliver ultra‐long cycle life (90% capacity retention after 3000 cycles), exceptional low‐temperature and rate performance, as well as improved thermal safety. This work offers a comprehensive interface and microstructure co‐design approach to promote the development and application of high‐performance solid‐state batteries.


  • Improving the cycling stability of nano single-crystal lithium-rich cathodes through high-energy interface passivation enabled by an ultrathin TiO2 layer

    by Zigeng Wu, Yan Li, Linjie Xian, Yichuan Dai, Qian Zhang, Guanjun Chen, Yongjie Feng, Chunlin Zeng, Yu Zhang, Weihao Zeng, et al.

  • In Situ Transformed Organic Redox Molecules for a Hydrogen Battery Operated at −70 °C

    by Xiang Chu, Zaichun Liu, Hengjie Liu, Hongbo Chen, Zhaoheng Liang, Zhonglin Li, Lidong Sun, Guili Zhao, Zhengxin Zhu, Taoli Jiang, et al.

    Rechargeable hydrogen batteries using organic materials and aqueous protonic electrolytes are sustainable and safe candidates for large-scale energy storage systems. 1,2-Naphthoquinone (1,2-NQ) is a promising organic molecule with a high theoretical capacity of 339 mAh g-1 via a highly reversible heterogeneous enolization reaction between C═O and C-OH moieties through uptake/removal of H+. Nevertheless, the mainstream synthetic route of 1,2-NQ is restricted to oxidizing 1- and 2-naphthol precursors, which involves expensive catalysts and toxic organic solvents. Herein, we propose a green and economical in situ transformation strategy to synthesize 1,2-NQ from a 2-nitro-1-naphthol (2N1N) precursor in an electrochemical manner for high-performance hydrogen batteries. The structural evolution from the 2N1N precursor to 1,2-NQ is confirmed by operando synchrotron radiation Fourier transformed infrared (SR-FTIR) characterization. As a result, the NQ-H2 battery delivers a high specific capacity of 323.4 mAh g-1 at 0.2 A g-1, approaching the theoretical capacity of 1,2-NQ, along with 10000 stable life cycles at 10 A g-1. It also exhibits a capacity of 155.9 mAh g-1 at low temperatures down to -70 °C. Moreover, an NQ-H2 pouch cell with an expanded capacity of 375.4 mAh as well as a high areal capacity of 6.3 mAh cm-2 is fabricated to demonstrate its potential for practical application. This work provides a feasible strategy in building sustainable hydrogen battery chemistry for practical applications.


  • Tuning the Swelling and Dispersion of SPAN Enables High‐Performance Li‐S Batteries

    by Linshuo Li, Zhi Gao, Ruotong Zhao, Yan Li, Dingyi Zhou, Weiming Tang, Guanjun Chen, Zigeng Wu, Zhilong Yang, Jinlong Yang

    Lithium‐sulfur (Li‐S) batteries have attracted significant attention due to their high energy density and low cost of raw materials. Although the SPAN cathode has better electrochemical performance than the traditional S 8 /C composite, it is far from meeting the needs of commercialization, and its energy density, cycle stability, and rate performance need to be further improved. In this study, the swelling and dispersion of SPAN in different solvents are investigated for the first time by using different binders to optimize the electrode structure. The selection of water as a solvent can reduce the swelling of SPAN and inhibit cracking in the electrode preparation process, which effectively improves the structural stability of the electrode during the long‐time charging and discharging process. The combination of CMC&SBR binder can reduce the agglomeration of active material and conductive carbon and contribute to the capacity of SPAN at a high current rate. As a result, the non‐swelling SPAN with CMC&SBR binder exhibits a stable long cycling performance (83% capacity retention for 200 cycles at 1 C) and high rate performance (1192 mAh g −1 at 5 C). In particular, the Li‐S pouch cell is able to cycle stably for more than 50 cycles at 0.2 C under high loading (SPAN loading level of 7.2 mg cm −2 and area capacity over 4 mAh cm −2 ) with the specific capacity maintained at 1306 mAh g −1 . This work has the potential to promote the commercialization of Li‐SPAN batteries.