Myo Min Aung
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Myo Min Aung has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Yoon Seok Chang
Korea Aerospace University (KAU)
9 shared publications - Dechrit Maneetham
Department of Mechatronics Engineering, Rajamangala University of Technology Thanyaburi, Pathum Thani, Thailand
2 shared publications - Kaung Soe Thar
Department of Mechatronics Engineering, Rajamangala University of Technology Thanyaburi, Khlong Luang District, Pathum Thani 12110, Thailand
2 shared publications
Latest Publications
- Open Access
Experimental Comparison of PID, LQR-Based, and PDD2-LQR Control for Stationary Balancing of a Full-Scale Bicycle Robot Using a Scissored-Pair Control Moment Gyroscope
This paper studies the stationary balancing of a full-scale bicycle robot using a scissored-pair control moment gyroscope (CMG). The test robot weighs 60 kg and includes two counter-rotating flywheels, a 20:1 geared gimbal system, an inertial measurement unit (IMU), and an embedded controller. For controller design, a simplified nonlinear model of the roll and CMG dynamics is derived and linearized around the upright position. The main contribution of this work is the experimental testing of a PDD2-LQR controller. This controller keeps the standard LQR state-feedback baseline and adds feedback from the roll error, roll rate, and filtered roll acceleration. Instead of redesigning the whole controller, the same LQR gains are used in both the baseline LQR and PDD2-LQR setups. This allows us to directly evaluate the benefit of the extra PDD2 terms on the same hardware under the same actuator limits. Experiments were carried out using PID, LQR, and PDD2-LQR controllers. The PDD2-LQR controller reached an average RMSE of 0.660 degrees and an average MAE of 0.477 degrees. These values represent improvements of about 51.8% and 43.2%, respectively, compared with the standard LQR controller. Overall, the results show that adding roll-motion feedback to the baseline controller improves the stationary balancing performance under the tested conditions.
Open AccessExperimental Comparison of PID, LQR-Based, and PDD2-LQR Control for Stationary Balancing of a Full-Scale Bicycle Robot Using a Scissored-Pair Control Moment Gyroscope
This paper studies the stationary balancing of a full-scale bicycle robot using a scissored-pair control moment gyroscope (CMG). The test robot weighs 60 kg and includes two counter-rotating flywheels, a 20:1 geared gimbal system, an inertial measurement unit (IMU), and an embedded controller. For controller design, a simplified nonlinear model of the roll and CMG dynamics is derived and linearized around the upright position. The main contribution of this work is the experimental testing of a PDD2-LQR controller. This controller keeps the standard LQR state-feedback baseline and adds feedback from the roll error, roll rate, and filtered roll acceleration. Instead of redesigning the whole controller, the same LQR gains are used in both the baseline LQR and PDD2-LQR setups. This allows us to directly evaluate the benefit of the extra PDD2 terms on the same hardware under the same actuator limits. Experiments were carried out using PID, LQR, and PDD2-LQR controllers. The PDD2-LQR controller reached an average RMSE of 0.660 degrees and an average MAE of 0.477 degrees. These values represent improvements of about 51.8% and 43.2%, respectively, compared with the standard LQR controller. Overall, the results show that adding roll-motion feedback to the baseline controller improves the stationary balancing performance under the tested conditions.
- Open Access
- 23 September 2026
- Published by MDPI AG in Preprints.org
Experimental Comparison of PID, LQR-Based, and PDD2-LQR Control for Stationary Balancing of a Full-Scale Bicycle Robot Using a Scissored-Pair Control Moment Gyroscope
This paper studies the stationary balancing of a full-scale bicycle robot using a scissored-pair control moment gyroscope (CMG). The test robot weighs 60 kg and includes two counter-rotating flywheels, a 20:1 geared gimbal system, an inertial measurement unit (IMU), and an embedded controller. For controller design, a simplified nonlinear model of the roll and CMG dynamics is derived and linearized around the upright position. The main contribution of this work is the experimental testing of a PDD2-LQR controller. This controller keeps the standard LQR state-feedback baseline and adds feedback from the roll error, roll rate, and filtered roll acceleration. Instead of redesigning the whole controller, the same LQR gains are used in both the baseline LQR and PDD2-LQR setups. This allows us to directly evaluate the benefit of the extra PDD2 terms on the same hardware under the same actuator limits. Experiments were carried out using PID, LQR, and PDD2-LQR controllers. The PDD2-LQR controller reached an average RMSE of 0.660 degrees and an average MAE of 0.477 degrees. These values represent improvements of about 51.8% and 43.2%, respectively, compared with the standard LQR controller. Overall, the results show that adding roll-motion feedback to the baseline controller significantly improves stationary balancing performance.
- 23 September 2026
- Published by MDPI AG in Preprints.org
Open AccessExperimental Comparison of PID, LQR-Based, and PDD2-LQR Control for Stationary Balancing of a Full-Scale Bicycle Robot Using a Scissored-Pair Control Moment Gyroscope
This paper studies the stationary balancing of a full-scale bicycle robot using a scissored-pair control moment gyroscope (CMG). The test robot weighs 60 kg and includes two counter-rotating flywheels, a 20:1 geared gimbal system, an inertial measurement unit (IMU), and an embedded controller. For controller design, a simplified nonlinear model of the roll and CMG dynamics is derived and linearized around the upright position. The main contribution of this work is the experimental testing of a PDD2-LQR controller. This controller keeps the standard LQR state-feedback baseline and adds feedback from the roll error, roll rate, and filtered roll acceleration. Instead of redesigning the whole controller, the same LQR gains are used in both the baseline LQR and PDD2-LQR setups. This allows us to directly evaluate the benefit of the extra PDD2 terms on the same hardware under the same actuator limits. Experiments were carried out using PID, LQR, and PDD2-LQR controllers. The PDD2-LQR controller reached an average RMSE of 0.660 degrees and an average MAE of 0.477 degrees. These values represent improvements of about 51.8% and 43.2%, respectively, compared with the standard LQR controller. Overall, the results show that adding roll-motion feedback to the baseline controller significantly improves stationary balancing performance.
- 12 October 2022
- Published by Springer Nature
- p. 137-151
Design and Implementation of a Smart Refrigerator: A Case Study
- 12 October 2022
- Published by Springer Nature
- p. 137-151
Design and Implementation of a Smart Refrigerator: A Case Study
- 12 October 2022
- Published by Springer Nature
- p. 1-3
Introduction
- 12 October 2022
- Published by Springer Nature
- p. 119-135
Food Traceability