Baker Kuehl
Baker Kuehl has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Michael John Forrester
Department of Chemical and Biological Engineering, Iowa State University, Ames, IA 50011, USA
6 shared publications - Eric W. Cochran
Department of Chemical and Biological Engineering, Iowa State University, Sweeney Hall, 618 Bissell Road, Ames, Iowa 50011, United States
5 shared publications Austin Hohmann
Department of Chemical & Biological Engineering
3 shared publicationsAndrew Becker
Department of Chemical & Biological Engineering
2 shared publicationsAnna McCaslin
Department of Chemical & Biological Engineering
2 shared publicationsConnor Smith
Department of Chemical & Biological Engineering
2 shared publications
Latest Publications
- 19 May 2026
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 27 (6) , 3697-3709
Poly-100: One-Pot Toughening of Polylactide with Soybean-Derived Reactive Elastomers
Poly(lactic acid) (PLA) is a leading biobased thermoplastic, but its brittleness limits broader use. Here, we report a one-pot Poly-100 route combining elastomer synthesis, formulation, and reactive extrusion without solvent removal, purification, or waste generation. Hyperbranched soybean-oil-derived elastomers were synthesized by RAFT polymerization directly in epoxidized soybean oil, which serves as monomer precursor, nonvolatile reaction medium, and formulation component. Poly(acrylated epoxidized high-oleic soybean oil) (PAEHOSO) and poly(methacrylated epoxidized high-oleic soybean oil) (PMAEHOSO) were incorporated into PLA, where residual epoxide groups promote in situ grafting and improve interfacial adhesion. PMAEHOSO showed better compatibility, producing finer dispersions and shifting toughening from interfacial cavitation to matrix shear yielding. At 20 wt % loading, it increased elongation at break from 3% to 30% while delivering the highest tensile toughness. This work establishes a scalable pathway for toughened PLA and demonstrates how reaction media can align polymer performance with sustainability goals.
- 19 May 2026
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 27 (6) , 3697-3709
Poly-100: One-Pot Toughening of Polylactide with Soybean-Derived Reactive Elastomers
Poly(lactic acid) (PLA) is a leading biobased thermoplastic, but its brittleness limits broader use. Here, we report a one-pot Poly-100 route combining elastomer synthesis, formulation, and reactive extrusion without solvent removal, purification, or waste generation. Hyperbranched soybean-oil-derived elastomers were synthesized by RAFT polymerization directly in epoxidized soybean oil, which serves as monomer precursor, nonvolatile reaction medium, and formulation component. Poly(acrylated epoxidized high-oleic soybean oil) (PAEHOSO) and poly(methacrylated epoxidized high-oleic soybean oil) (PMAEHOSO) were incorporated into PLA, where residual epoxide groups promote in situ grafting and improve interfacial adhesion. PMAEHOSO showed better compatibility, producing finer dispersions and shifting toughening from interfacial cavitation to matrix shear yielding. At 20 wt % loading, it increased elongation at break from 3% to 30% while delivering the highest tensile toughness. This work establishes a scalable pathway for toughened PLA and demonstrates how reaction media can align polymer performance with sustainability goals.
- 16 December 2024
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 12 (52) , 18616-18623
Not Cutting Corners: Bioderived Triggers Driving Oxidative Main Chain Scission of Poly(ethylene terephthalate)
- 16 December 2024
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 12 (52) , 18616-18623
Not Cutting Corners: Bioderived Triggers Driving Oxidative Main Chain Scission of Poly(ethylene terephthalate)
- 18 October 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (43) , 59280-59290
Fully Atom-Efficient Solvent-Mediated Biopolymer Manufacturing: A Base Case Illustrated with Macromolecular Surfactants Tailored to Stable Polymer–Water Interfaces
This work introduces a novel 1-pot, 0-waste, 0-VOC methodology for synthesizing polymeric surfactants using acrylated epoxidized soybean oil and acrylated glycerol as primary monomers. These macromolecular surfactants are synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization, allowing for tunable hydrophilic-lipophilic balance (HLB) and ionic properties. We characterize the copolymers' chemical composition and surface-active properties, and evaluate their effectiveness in forming and stabilizing emulsions of semiepoxidized soybean oil and poly(acrylated epoxidized high oleic soybean oil). Comprehensive analyses, including gel permeation chromatography, nuclear magnetic resonance spectroscopy, dynamic light scattering, particle size distribution, zeta potential, and critical micelle concentration, provide detailed insights into the copolymers and the emulsions they form. The results demonstrate that the RAFT-polymerized surfactants offer long-lasting stability and effectively disperse both common oil-in-water emulsions and highly viscous and hydrophobic polymer latexes. These surfactants outperform traditional small molecule surfactants by reducing particle size and preventing phase separation, even over extended storage periods. Stable polymer-water interfaces are achieved through HLB control, tailored by monomer composition, and the final product requires no additional purification since polymerization occurs in liquid surfactants. While small molecules contribute to rapid micelle formation, the polymeric components enhance long-term stability through steric repulsion and slower dynamics. This method enables even the emulsification of polymers with submicron particle size, which ordinarily requires emulsion polymerization. Integrating biobased polymeric surfactants with advanced polymer processing techniques opens new possibilities for transforming highly hydrophobic polymers into latexes, facilitating downstream applications. This innovation enhances the environmental sustainability of surfactant production and broadens the potential for polymer emulsification technologies. Additionally, the integrated solution-processing approach demonstrated here can be applied to other emerging polymers, where judiciously selected nonvolatile solvents facilitate the polymerization and play a role in the final application.
- 18 October 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (43) , 59280-59290
Fully Atom-Efficient Solvent-Mediated Biopolymer Manufacturing: A Base Case Illustrated with Macromolecular Surfactants Tailored to Stable Polymer–Water Interfaces
This work introduces a novel 1-pot, 0-waste, 0-VOC methodology for synthesizing polymeric surfactants using acrylated epoxidized soybean oil and acrylated glycerol as primary monomers. These macromolecular surfactants are synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization, allowing for tunable hydrophilic-lipophilic balance (HLB) and ionic properties. We characterize the copolymers' chemical composition and surface-active properties, and evaluate their effectiveness in forming and stabilizing emulsions of semiepoxidized soybean oil and poly(acrylated epoxidized high oleic soybean oil). Comprehensive analyses, including gel permeation chromatography, nuclear magnetic resonance spectroscopy, dynamic light scattering, particle size distribution, zeta potential, and critical micelle concentration, provide detailed insights into the copolymers and the emulsions they form. The results demonstrate that the RAFT-polymerized surfactants offer long-lasting stability and effectively disperse both common oil-in-water emulsions and highly viscous and hydrophobic polymer latexes. These surfactants outperform traditional small molecule surfactants by reducing particle size and preventing phase separation, even over extended storage periods. Stable polymer-water interfaces are achieved through HLB control, tailored by monomer composition, and the final product requires no additional purification since polymerization occurs in liquid surfactants. While small molecules contribute to rapid micelle formation, the polymeric components enhance long-term stability through steric repulsion and slower dynamics. This method enables even the emulsification of polymers with submicron particle size, which ordinarily requires emulsion polymerization. Integrating biobased polymeric surfactants with advanced polymer processing techniques opens new possibilities for transforming highly hydrophobic polymers into latexes, facilitating downstream applications. This innovation enhances the environmental sustainability of surfactant production and broadens the potential for polymer emulsification technologies. Additionally, the integrated solution-processing approach demonstrated here can be applied to other emerging polymers, where judiciously selected nonvolatile solvents facilitate the polymerization and play a role in the final application.
- 1 August 2024
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 12 (32) , 12042-12051
Glycerol-Based Pressure Sensitive Adhesives: Synthesis and Applications
- 1 August 2024
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 12 (32) , 12042-12051
Glycerol-Based Pressure Sensitive Adhesives: Synthesis and Applications
- Open Access
- 28 March 2023
- Published by Wiley in Advanced Materials
- Vol. 35 (21) , e2210154
Dihydroxyterephthalate—A Trojan Horse PET Counit for Facile Chemical Recycling
Here, low‐energy poly(ethylene terephthalate) (PET) chemical recycling in water: PET copolymers with diethyl 2,5‐dihydroxyterephthalate (DHTE) undergo selective hydrolysis at DHTE sites, autocatalyzed by neighboring group participation, is demonstrated. Liberated oligomeric subchains further hydrolyze until only small molecules remain. Poly(ethylene terephthalate‐stat‐2,5‐dihydroxyterephthalate) copolymers were synthesized via melt polycondensation and then hydrolyzed in 150–200 °C water with 0–1 wt% ZnCl2, or alternatively in simulated sea water. Degradation progress follows pseudo‐first order kinetics. With increasing DHTE loading, the rate constant increases monotonically while the thermal activation barrier decreases. The depolymerization products are ethylene glycol, terephthalic acid, 2,5‐dihydroxyterephthalic acid, and bis(2‐hydroxyethyl) terephthalate dimer, which could be used to regenerate virgin polymer. Composition‐optimized copolymers show a decrease of nearly 50% in the Arrhenius activation energy, suggesting a 6‐order reduction in depolymerization time under ambient conditions compared to that of PET homopolymer. This study provides new insight to the design of polymers for end‐of‐life while maintaining key properties like service temperature and mechanical properties. Moreover, this chemical recycling procedure is more environmentally friendly compared to traditional approaches since water is the only needed material, which is green, sustainable, and cheap.
- 28 March 2023
- Published by Wiley in Advanced Materials
- Vol. 35 (21) , e2210154
Open AccessDihydroxyterephthalate—A Trojan Horse PET Counit for Facile Chemical Recycling
Here, low‐energy poly(ethylene terephthalate) (PET) chemical recycling in water: PET copolymers with diethyl 2,5‐dihydroxyterephthalate (DHTE) undergo selective hydrolysis at DHTE sites, autocatalyzed by neighboring group participation, is demonstrated. Liberated oligomeric subchains further hydrolyze until only small molecules remain. Poly(ethylene terephthalate‐stat‐2,5‐dihydroxyterephthalate) copolymers were synthesized via melt polycondensation and then hydrolyzed in 150–200 °C water with 0–1 wt% ZnCl2, or alternatively in simulated sea water. Degradation progress follows pseudo‐first order kinetics. With increasing DHTE loading, the rate constant increases monotonically while the thermal activation barrier decreases. The depolymerization products are ethylene glycol, terephthalic acid, 2,5‐dihydroxyterephthalic acid, and bis(2‐hydroxyethyl) terephthalate dimer, which could be used to regenerate virgin polymer. Composition‐optimized copolymers show a decrease of nearly 50% in the Arrhenius activation energy, suggesting a 6‐order reduction in depolymerization time under ambient conditions compared to that of PET homopolymer. This study provides new insight to the design of polymers for end‐of‐life while maintaining key properties like service temperature and mechanical properties. Moreover, this chemical recycling procedure is more environmentally friendly compared to traditional approaches since water is the only needed material, which is green, sustainable, and cheap.
- 6 October 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (41) , 46912-46919
Cavitation-Mediated Fracture Energy Dissipation in Polylactide at Rubbery Soybean Oil-Based Block Copolymer Interfaces Formed via Reactive Extrusion
Here, we spearhead a new approach to biopolymer impact modification that demonstrates superior performance while maintaining greater than 99% compostability. Using soybean-based monomers, a virtually untapped resource in terms of commercial volume and overall cost, a series of hyperbranched block copolymers were synthesized and melt-processed with poly(l-lactide) (PLA) to yield impact resistant all-polymer composites. Although PLA impact modification has been treated extensively, to date, the only practical solutions have relied on non-compostable petroleum-based rubbers. This study illustrates the activity of energy dissipation mechanisms such as cavitation, classically relegated to well-entangled petroleum-based rubbers, in poorly entangled hyperbranched soybean-based rubbers. Furthermore, we present a complete study of the mechanical performance and morphology of these impact modified PLA composites. The significance of combining deformation theory with a scalable green alternative to petroleum-based rubbers opens up a potential avenue for cheap compostable engineering thermoplastics.
- 6 October 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (41) , 46912-46919
Cavitation-Mediated Fracture Energy Dissipation in Polylactide at Rubbery Soybean Oil-Based Block Copolymer Interfaces Formed via Reactive Extrusion
Here, we spearhead a new approach to biopolymer impact modification that demonstrates superior performance while maintaining greater than 99% compostability. Using soybean-based monomers, a virtually untapped resource in terms of commercial volume and overall cost, a series of hyperbranched block copolymers were synthesized and melt-processed with poly(l-lactide) (PLA) to yield impact resistant all-polymer composites. Although PLA impact modification has been treated extensively, to date, the only practical solutions have relied on non-compostable petroleum-based rubbers. This study illustrates the activity of energy dissipation mechanisms such as cavitation, classically relegated to well-entangled petroleum-based rubbers, in poorly entangled hyperbranched soybean-based rubbers. Furthermore, we present a complete study of the mechanical performance and morphology of these impact modified PLA composites. The significance of combining deformation theory with a scalable green alternative to petroleum-based rubbers opens up a potential avenue for cheap compostable engineering thermoplastics.