PKP. S Prem Kumar

P. S Prem Kumar

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


P. S Prem Kumar has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Numerical simulation on the dynamic characteristics of VAWT with different cavity layouts

    by Prasanna Vasan V., Srinivasa Narasimman V.B., Alwin Thomson A., Lakshmi Balaji S., Dhatchna Moorthy K., Karthik Vel E, Sivaraja Subramania Pillai, Premkumar P.S., Nadaraja Pillai S.

    This study aims to understand the aero-acoustic performance of H-type vertical axis wind turbine (VAWT) with different cavity configurations through numerical simulation, improving its overall performance and making it suitable for urban applications. Numerical simulation of VAWT was carried out in ANSYS FLUENT software with turbine modelled through SOLIDWORKS. Unsteady Naiver–Stokes equation coupled with SST k-ω turbulence model was used to model the flow field around VAWT. Ffowcs Williams–Hawkings analogy was used for acoustic prediction from VAWT. Two cavity positions, i.e. at 0.25c from the leading edge and at 0.75c from the trailing edge were fixed with five different layouts considered. The cavity layouts are trailing edge single cavity (TESC), trailing edge double cavity (TEDC), leading edge single cavity (LESC), leading edge double cavity (LEDC) and BASE models. The power curve for five different VAWT configurations was evaluated and validated with experimental, computational fluid dynamics works. The qualitative aspect of wake length and wake recovery rate was evaluated for each configuration. Acoustic readings were carried out through receivers placed in circumferential directions as well as downstream directions. The power curve of VAWT shows that TESC tends to be the optimum for urban applications, as it provides maximum power performance compared to other models investigated. TESC delivers a maximum power enhancement of 72.5% compared to BASE models. The cavity in the trailing edge reduces the negative torque and provides enhanced self-starting capability. Cavity-configured VAWT shows better wake recovery than BASE models at near and far fields, enabling them ideal for wind farm applications. In the acoustic case, TESC and TEDC models tend to be quieter at low tip speed ratio (TSR), while at higher TSR, LESC and LEDC prove to be silent. LESC and LEDC tend to reduce sound pressure level value at blade passing frequency compared to BASE models. Since the rotor performance of VAWT with different cavity configurations has been explored over the past few years, this is the first research work that deals with wake dynamics and acoustic dynamics of VAWT with cavities. This work identifies the acoustic nature of VAWT with cavity depends upon cavity position which in turn depends on operating TSR as well as the direction in which noise is perceived. The application of a cavity in VAWT will be an ideal solution for urban applications with enhanced power performance and lower operating noise.

  • Open Access

    Comparative Study of Structural and Mechanical Properties of as Deposited and Shock Wave Exposed NiW Nano Structured Thin Films

    by G Nivetha, R. Kannan, M Selvambikai, C Vasantharaj, B Praveen Kumar, P. S Prem Kumar, K Sundararaj

    The current work describes the effect of shock wave exposure on electroplated NiW thin films. NiW thin films were deposited through electrodeposition process by varying the bath temperatures (35°C and 70°C) at constant current density of 1A/dm2. The deposited NiW thin films were exposed to shock waves with varying Mach numbers of 1.13 and 2.33 using an in-house shock wave tube facility. The as-deposited and shock wave-exposed NiW thin films were characterized by XRD, FESEM, EDS, and EIS to reveal its structural and mechanical properties. The XRD results disclose the stable cubic structural phase of as deposited and shock wave exposed NiW thin films with average crystallite size varying between 5 nm to 17nm. The elemental composition of as-deposited and shock-wave exposed films are similar as confirmed in the EDS analysis. This henceforth represents the stability of nanostructured NiW film in terms of compositional and structural aspect. Morphological analysis through FESEM shows that the exposed thin film is defect free due to the impact of shock waves. Furthermore, corrosion resistance is observed to enhance ten times in shock-wave exposed thin film than as-deposited thin film for higher mach number (Pressure ~63 bar). Similarly, corrosion resistance for low mach number (pressure ~13 bar) increases by three times of as deposited film according to the EIS analysis. Therefore, the structural, morphological and corrosion properties were enhanced upon surface treatment by shock wave exposure. NiW thin films with enhanced mechanical properties such as low corrosion rate, high corrosion resistance is used in various industrial applications like defense applications, aircraft, and marine applications.