Chengjian Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chengjian Zhang has a total of 66 co-authors. Here are the top co-authors by number of shared publications:
- Xinghong Zhang
National Key Laboratory of Science and Technology on Advanced Composites in Special Environments Harbin Institute of Technology Harbin 150001 P. R. China
38 shared publications Xiong Liu
State Key Laboratory of Biobased Transportation Fuel Technology, International Research Center for X Polymers, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou, China
13 shared publicationsXun Zhang
State Key Laboratory of Biobased Transportation Fuel Technology International Research Center for X Polymers Department of Polymer Science and Engineering Zhejiang University Hangzhou China
10 shared publicationsXimin Feng
State Key Laboratory of Biobased Transportation Fuel Technology International Research Center for X Polymers Department of Polymer Science and Engineering Zhejiang University Hangzhou China
8 shared publicationsXiaowei Geng
State Key Laboratory of Biobased Transportation Fuel Technology International Research Center for X Polymers Department of Polymer Science and Engineering Zhejiang University Hangzhou China
7 shared publications- Wenqi Guo
State Key Laboratory of Biobased Transportation Fuel Technology, International Research Center for X Polymers, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou, China
6 shared publications
Latest Publications
- Open Access
- 27 October 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (20) , e71161
Acid‐Catalyzed Alternating Copolymerization of Oxetane With Cyclic Anhydride
Ring‐opening (co)polymerization is a versatile method for the synthesis of aliphatic polyesters. A fundamental challenge in this field lies in devising fresh synthetic methodologies to broaden the scope of aliphatic polyesters. In this study, we have successfully achieved the cationic copolymerization of various oxetanes (OX) and cyclic anhydrides using diverse Lewis/Bronsted acid catalysts. The method yields aliphatic polyesters with various structures and properties. It is proposed that OX firstly self‐polymerized rapidly to form polyether, which then converted into polyester via the chain transfer reaction from polyether to cyclic anhydride. The resulting polyesters exhibit low number‐average molecular weights ( M n s) of 1.7–4.8 kDa, dispersities ( Ð ) of 1.1–1.6, glass transition temperatures ( T g s) ranging from −55 to 2 °C, and high decomposition temperatures ( T d s) of up to 339 °C. This study has introduced a practical approach for synthesizing aliphatic polyesters through cationic copolymerization.
- 27 October 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (20) , e71161
Open AccessAcid‐Catalyzed Alternating Copolymerization of Oxetane With Cyclic Anhydride
Ring‐opening (co)polymerization is a versatile method for the synthesis of aliphatic polyesters. A fundamental challenge in this field lies in devising fresh synthetic methodologies to broaden the scope of aliphatic polyesters. In this study, we have successfully achieved the cationic copolymerization of various oxetanes (OX) and cyclic anhydrides using diverse Lewis/Bronsted acid catalysts. The method yields aliphatic polyesters with various structures and properties. It is proposed that OX firstly self‐polymerized rapidly to form polyether, which then converted into polyester via the chain transfer reaction from polyether to cyclic anhydride. The resulting polyesters exhibit low number‐average molecular weights ( M n s) of 1.7–4.8 kDa, dispersities ( Ð ) of 1.1–1.6, glass transition temperatures ( T g s) ranging from −55 to 2 °C, and high decomposition temperatures ( T d s) of up to 339 °C. This study has introduced a practical approach for synthesizing aliphatic polyesters through cationic copolymerization.
- 30 September 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (46) , e6732152
Covalently Preorganized (Thio)Urea–Alkoxide Organocatalysts Enable Controlled Synthesis of High‐Molecular‐Weight Polyglycolide
Polyglycolide (PGA) is a leading biodegradable polyester, but controlled access to high‐molecular‐weight PGA remains challenging. Here, we introduce a covalent preorganization strategy that merges H‐bond‐mediated monomer activation and alkoxide‐based chain propagation within a single molecular scaffold. Systematic variation of the H‐bond donor, substituent electronics, tether length, and counter cation identifies the thiourea‐based sodium alkoxide Cat. 7 as an optimal catalyst/initiator. Under mild conditions, Cat. 7 enables rapid and selective ring‐opening polymerization of glycolide, affording PGA with number‐average molecular weights up to 222.4 kDa (dispersity of 1.57, turnover number of 11 600, and turnover frequency of 483 h −1 ). Crystallographic, kinetic, spectroscopic, and computational studies support an intramolecular cooperative mechanism. The resulting high‐molecular‐weight PGA exhibits high crystallinity and tensile strength, highlighting (thio)urea‐alkoxide covalent integration as a powerful strategy for the precision synthesis of high‐performance biodegradable polyesters.
- 30 September 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (46) , e6732152
Covalently Preorganized (Thio)Urea–Alkoxide Organocatalysts Enable Controlled Synthesis of High‐Molecular‐Weight Polyglycolide
Polyglycolide (PGA) is a leading biodegradable polyester, but controlled access to high‐molecular‐weight PGA remains challenging. Here, we introduce a covalent preorganization strategy that merges H‐bond‐mediated monomer activation and alkoxide‐based chain propagation within a single molecular scaffold. Systematic variation of the H‐bond donor, substituent electronics, tether length, and counter cation identifies the thiourea‐based sodium alkoxide Cat. 7 as an optimal catalyst/initiator. Under mild conditions, Cat. 7 enables rapid and selective ring‐opening polymerization of glycolide, affording PGA with number‐average molecular weights up to 222.4 kDa (dispersity of 1.57, turnover number of 11 600, and turnover frequency of 483 h −1 ). Crystallographic, kinetic, spectroscopic, and computational studies support an intramolecular cooperative mechanism. The resulting high‐molecular‐weight PGA exhibits high crystallinity and tensile strength, highlighting (thio)urea‐alkoxide covalent integration as a powerful strategy for the precision synthesis of high‐performance biodegradable polyesters.
- 28 September 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (46) , e6732152
Covalently Preorganized (Thio)Urea–Alkoxide Organocatalysts Enable Controlled Synthesis of High‐Molecular‐Weight Polyglycolide
Polyglycolide (PGA) is a leading biodegradable polyester, but controlled access to high‐molecular‐weight PGA remains challenging. Here, we introduce a covalent preorganization strategy that merges H‐bond‐mediated monomer activation and alkoxide‐based chain propagation within a single molecular scaffold. Systematic variation of the H‐bond donor, substituent electronics, tether length, and counter cation identifies the thiourea‐based sodium alkoxide Cat. 7 as an optimal catalyst/initiator. Under mild conditions, Cat. 7 enables rapid and selective ring‐opening polymerization of glycolide, affording PGA with number‐average molecular weights up to 222.4 kDa (dispersity of 1.57, turnover number of 11 600, and turnover frequency of 483 h −1 ). Crystallographic, kinetic, spectroscopic, and computational studies support an intramolecular cooperative mechanism. The resulting high‐molecular‐weight PGA exhibits high crystallinity and tensile strength, highlighting (thio)urea‐alkoxide covalent integration as a powerful strategy for the precision synthesis of high‐performance biodegradable polyesters.
- 28 September 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (46) , e6732152
Covalently Preorganized (Thio)Urea–Alkoxide Organocatalysts Enable Controlled Synthesis of High‐Molecular‐Weight Polyglycolide
Polyglycolide (PGA) is a leading biodegradable polyester, but controlled access to high‐molecular‐weight PGA remains challenging. Here, we introduce a covalent preorganization strategy that merges H‐bond‐mediated monomer activation and alkoxide‐based chain propagation within a single molecular scaffold. Systematic variation of the H‐bond donor, substituent electronics, tether length, and counter cation identifies the thiourea‐based sodium alkoxide Cat. 7 as an optimal catalyst/initiator. Under mild conditions, Cat. 7 enables rapid and selective ring‐opening polymerization of glycolide, affording PGA with number‐average molecular weights up to 222.4 kDa (dispersity of 1.57, turnover number of 11 600, and turnover frequency of 483 h −1 ). Crystallographic, kinetic, spectroscopic, and computational studies support an intramolecular cooperative mechanism. The resulting high‐molecular‐weight PGA exhibits high crystallinity and tensile strength, highlighting (thio)urea‐alkoxide covalent integration as a powerful strategy for the precision synthesis of high‐performance biodegradable polyesters.
- Open Access
- 28 September 2026
- Published by American Chemical Society (ACS) in Polymer Science & Technology
Terpolymerization of Glycolide, Cyclohexene Oxide and CO2 for Crystalline Poly(carbonate-esters)
Polyglycolide (PGA) is a crystalline polyester with notable mechanical properties, biodegradability, and biocompatibility. Incorporating PGA into amorphous epoxide/CO2 copolymers presents a promising strategy for obtaining biodegradable crystalline plastics. In this work, a zinc–cobalt(III) double metal cyanide complex [Zn–Co(III) DMCC] was firstly employed to catalyze the one-pot terpolymerization of glycolide (GA), CO2, and cyclohexene oxide (CHO), affording a terpolymer with a catalytic efficiency of 1.54 kg terpolymer/g catalyst and a molecular weight (Mn) of up to 59.3 kDa. The influence of the [CHO]/[GA] feed ratios on the terpolymer composition was elucidated. Specifically, at [CHO]/[GA] ratios of 99/1 and 97/3, the resulting products exhibited glass transition temperatures (Tg) of 99.1 and 104 °C, respectively. While at [CHO]/[GA] ratios ranging from 93/7 to 50/50, melting temperatures (Tms) of 211.6–219.3 °C were detected for the terpolymers, indicating the formation of crystalline poly(carbonate-esters). The results offer a practical pathway towards high-performance modification of epoxide/CO2 copolymers.
- 28 September 2026
- Published by American Chemical Society (ACS) in Polymer Science & Technology
Open AccessTerpolymerization of Glycolide, Cyclohexene Oxide and CO2 for Crystalline Poly(carbonate-esters)
Polyglycolide (PGA) is a crystalline polyester with notable mechanical properties, biodegradability, and biocompatibility. Incorporating PGA into amorphous epoxide/CO2 copolymers presents a promising strategy for obtaining biodegradable crystalline plastics. In this work, a zinc–cobalt(III) double metal cyanide complex [Zn–Co(III) DMCC] was firstly employed to catalyze the one-pot terpolymerization of glycolide (GA), CO2, and cyclohexene oxide (CHO), affording a terpolymer with a catalytic efficiency of 1.54 kg terpolymer/g catalyst and a molecular weight (Mn) of up to 59.3 kDa. The influence of the [CHO]/[GA] feed ratios on the terpolymer composition was elucidated. Specifically, at [CHO]/[GA] ratios of 99/1 and 97/3, the resulting products exhibited glass transition temperatures (Tg) of 99.1 and 104 °C, respectively. While at [CHO]/[GA] ratios ranging from 93/7 to 50/50, melting temperatures (Tms) of 211.6–219.3 °C were detected for the terpolymers, indicating the formation of crystalline poly(carbonate-esters). The results offer a practical pathway towards high-performance modification of epoxide/CO2 copolymers.
- 26 June 2026
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 17 (27) , 2918-2924
Synthesis of block poly(carbonate-ether) diol via chain transfer copolymerization
Effective synthesis of poly(carbonate-ether) block diol via CO 2 /PO copolymerization using Zn–Co DMCC and PPG400.
- 26 June 2026
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 17 (27) , 2918-2924
Synthesis of block poly(carbonate-ether) diol via chain transfer copolymerization
Effective synthesis of poly(carbonate-ether) block diol via CO 2 /PO copolymerization using Zn–Co DMCC and PPG400.
- Open Access
- 27 January 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Synthesis of poly(ester disulfide)s from S8-involved step-growth addition polymerization at ambient temperature
Elemental sulfur (S8), an abundant petroleum byproduct, is leveraged as a linchpin monomer in an organobase-catalyzed step-growth addition polymerization with dithiols and diacrylates at ambient temperature. This method enables the scalable synthesis of poly(ester disulfide)s—featuring alternating ester and disulfide linkages—with exceptional atom economy ( > 95% yield), Mn up to 42.0 kDa, and dual functionality: biodegradable ester units and stimuli-responsive disulfides. Mechanistic studies reveal a chemoselective three-component coupling involving S8 ring-opening, disulfide anion formation, and Michael addition, quantitatively generating symmetric and asymmetric disulfides in near-equimolar ratios. Thermal and mechanical characterizations of the poly(ester disulfide)s reveal programmable properties: High thermal stability (Td,5% = 248–281 °C), tunable phase behavior (amorphous Tg = −64 °C to semicrystalline Tm = 142 °C), and reductive degradation. By overcoming traditional limitations of harsh conditions and monomer scope, this strategy establishes S8 as a versatile feedstock for functional polymers, opening avenues for dynamic materials in biomedicine and environmental remediation.
- 27 January 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessSynthesis of poly(ester disulfide)s from S8-involved step-growth addition polymerization at ambient temperature
Elemental sulfur (S8), an abundant petroleum byproduct, is leveraged as a linchpin monomer in an organobase-catalyzed step-growth addition polymerization with dithiols and diacrylates at ambient temperature. This method enables the scalable synthesis of poly(ester disulfide)s—featuring alternating ester and disulfide linkages—with exceptional atom economy ( > 95% yield), Mn up to 42.0 kDa, and dual functionality: biodegradable ester units and stimuli-responsive disulfides. Mechanistic studies reveal a chemoselective three-component coupling involving S8 ring-opening, disulfide anion formation, and Michael addition, quantitatively generating symmetric and asymmetric disulfides in near-equimolar ratios. Thermal and mechanical characterizations of the poly(ester disulfide)s reveal programmable properties: High thermal stability (Td,5% = 248–281 °C), tunable phase behavior (amorphous Tg = −64 °C to semicrystalline Tm = 142 °C), and reductive degradation. By overcoming traditional limitations of harsh conditions and monomer scope, this strategy establishes S8 as a versatile feedstock for functional polymers, opening avenues for dynamic materials in biomedicine and environmental remediation.
- 21 November 2025
- Published by American Chemical Society (ACS) in Accounts of Chemical Research
- Vol. 58 (24) , 3603-3613
A Versatile Platform for Recyclable Polyesters: Alternating Copolymerization of Aldehydes (or Their Derivatives) with Cyclic Anhydrides
ConspectusThe rapid expansion of the global polymer industry has highlighted the urgent need for sustainable alternatives to traditional synthetic polymers, which are predominantly derived from nonrenewable fossil resources and pose significant environmental challenges due to their persistence in ecosystems. In response, the development of chemically recyclable polymers has emerged as a promising strategy to reconcile the utility of polymer materials with the imperative of sustainability. However, the synthesis of such polymers often faces limitations in monomer diversity, polymerization efficiency, and the ability to achieve true chemical recyclability.In this Account, we present a comprehensive overview of our recent advancements in the synthesis of chemically recyclable polyesters through the alternating copolymerization of aldehydes (or their derivatives) with cyclic anhydrides. This approach leverages abundant and cost-effective feedstocks, including aldehydes derived from renewable resources and cyclic anhydrides prepared from biorenewable diacids, to create a versatile platform for sustainable polymer synthesis. By employing a wide range of monomers, we have successfully synthesized over 140 polyesters with highly tunable structures and properties.A key feature of this copolymerization is its chemical reversibility, a thermodynamic characteristic arising from a low reaction enthalpy change. This results in a ceiling temperature behavior, wherein the polymer becomes unstable with respect to its monomers upon heating. This chemical reversibility is the fundamental principle that enables the efficient, closed-loop chemical recycling that we demonstrate. Additionally, the water-degradable properties of certain copolymers, particularly those derived from formaldehyde, offer a pathway for developing polymers that can fully degrade into valuable small molecules in water or seawater. This feature is particularly significant in the context of marine pollution, where traditional plastics persist for centuries. Furthermore, the polyesters derived from Schiff bases exhibited unique self- and autodegradation properties. This tunable degradation behavior, governed by polymer structure, provides a versatile tool for designing materials with tailored life spans. Moreover, the mechanical and flame-retardant properties of polyesters derived from chloral and cyclic anhydrides make them promising alternatives to conventional poly(vinyl chloride).The broader implications of these studies extend beyond the synthesis of sustainable polyesters. By demonstrating the feasibility of utilizing renewable resources for polymer production, we contribute to the development of a circular economy, where materials are designed with their end-of-life considerations in mind. Future research will focus on expanding the scope of monomers, optimizing polymerization conditions, and integrating these materials into industrial processes.
- 21 November 2025
- Published by American Chemical Society (ACS) in Accounts of Chemical Research
- Vol. 58 (24) , 3603-3613
A Versatile Platform for Recyclable Polyesters: Alternating Copolymerization of Aldehydes (or Their Derivatives) with Cyclic Anhydrides
ConspectusThe rapid expansion of the global polymer industry has highlighted the urgent need for sustainable alternatives to traditional synthetic polymers, which are predominantly derived from nonrenewable fossil resources and pose significant environmental challenges due to their persistence in ecosystems. In response, the development of chemically recyclable polymers has emerged as a promising strategy to reconcile the utility of polymer materials with the imperative of sustainability. However, the synthesis of such polymers often faces limitations in monomer diversity, polymerization efficiency, and the ability to achieve true chemical recyclability.In this Account, we present a comprehensive overview of our recent advancements in the synthesis of chemically recyclable polyesters through the alternating copolymerization of aldehydes (or their derivatives) with cyclic anhydrides. This approach leverages abundant and cost-effective feedstocks, including aldehydes derived from renewable resources and cyclic anhydrides prepared from biorenewable diacids, to create a versatile platform for sustainable polymer synthesis. By employing a wide range of monomers, we have successfully synthesized over 140 polyesters with highly tunable structures and properties.A key feature of this copolymerization is its chemical reversibility, a thermodynamic characteristic arising from a low reaction enthalpy change. This results in a ceiling temperature behavior, wherein the polymer becomes unstable with respect to its monomers upon heating. This chemical reversibility is the fundamental principle that enables the efficient, closed-loop chemical recycling that we demonstrate. Additionally, the water-degradable properties of certain copolymers, particularly those derived from formaldehyde, offer a pathway for developing polymers that can fully degrade into valuable small molecules in water or seawater. This feature is particularly significant in the context of marine pollution, where traditional plastics persist for centuries. Furthermore, the polyesters derived from Schiff bases exhibited unique self- and autodegradation properties. This tunable degradation behavior, governed by polymer structure, provides a versatile tool for designing materials with tailored life spans. Moreover, the mechanical and flame-retardant properties of polyesters derived from chloral and cyclic anhydrides make them promising alternatives to conventional poly(vinyl chloride).The broader implications of these studies extend beyond the synthesis of sustainable polyesters. By demonstrating the feasibility of utilizing renewable resources for polymer production, we contribute to the development of a circular economy, where materials are designed with their end-of-life considerations in mind. Future research will focus on expanding the scope of monomers, optimizing polymerization conditions, and integrating these materials into industrial processes.
- 6 November 2025
- Published by Springer Nature in Nature Synthesis
- Vol. 5 (2) , 251-261
Air-stable covalent borane–oxyanion organocatalysts for ring-opening copolymerization
- 6 November 2025
- Published by Springer Nature in Nature Synthesis
- Vol. 5 (2) , 251-261
Air-stable covalent borane–oxyanion organocatalysts for ring-opening copolymerization
- 10 September 2025
- Published by Springer Nature in Chinese Journal of Polymer Science
- Vol. 43 (10) , 1774-1784
Poly(thiocarbonate) Synthesis from Carbonyl Sulfide (or Carbon Disulfide), Diol, and Dichlorides: A Step Growth Route to PE-like Sulfur-containing Polymers
- 10 September 2025
- Published by Springer Nature in Chinese Journal of Polymer Science
- Vol. 43 (10) , 1774-1784
Poly(thiocarbonate) Synthesis from Carbonyl Sulfide (or Carbon Disulfide), Diol, and Dichlorides: A Step Growth Route to PE-like Sulfur-containing Polymers