SSShangqing Shi

Shangqing Shi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shangqing Shi has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Deep Learning: A Highly Efficient Control Scheme for Reconfigurable Photonic Chips

    by Hongsheng Niu, Dongdong Lin, Shangqing Shi, Feng Zhang, Nuoyi Zhou, Rui Ma, Junhao Ni, Chen Guo, Enze Zhou, Yifei Chen, et al.

    Reconfigurable photonic chips have attracted considerable attention for their broad applicability across various scenarios. However, manual control of these chips is difficult and time-consuming due to the presence of multiple electrodes and the inherent thermal crosstalk between them. To tackle this issue, some feedback-control methods based on additional on-chip optical power taps and self-configuration using intelligent optimization algorithms have been proposed. Although these methods are beneficial, they are constrained by low efficiency, limited flexibility, and a tendency to converge to local optima. In this work, we proposed and experimentally validated a deep learning-driven control scheme for reconfigurable photonic chips. The trained deep learning framework can rapidly and accurately predict the required control voltages based on user-specified target responses. As a proof of concept, a convolutional neural network (CNN) was implemented to establish the nonlinear mapping between the transmission spectra of a reconfigurable microring resonator (MRR)-assisted asymmetric Mach–Zehnder interferometer (AMZI) chip and its required control voltages through end-to-end learning. Utilizing the trained CNN, the necessary control voltages for different target transmission spectra of the chip can be accurately predicted within 100 milliseconds. The experimental results demonstrated that the trained CNN attained a mean absolute percentage error (MAPE) of less than 0.5% on the test dataset. Moreover, an error margin of under 2% was achieved when utilizing user-defined simulated spectra as the target response. The proposed scheme provides a highly efficient approach for the intelligent control of reconfigurable photonic chips.


  • A Simple Multi-Functional Optical Chip With High Reconfigurability

    by Wei Cheng, Hongsheng Niu, Chen Guo, Shangqing Shi, Jin Wang, Guohua Hu, Yiping Cui, Binfeng Yun

    Unlike the application-specific optical chips, reconfigurable optical chip can offer various optical signal processing functions, which can dynamically meet the various requirements in different application scenarios. To achieve multiple functions, relatively complex optical chip configuration is usually needed, which poses the difficulty to control. Here, we propose a highly reconfigurable integrated silicon nitride optical chip by simply cascading Mach-Zehnder interferometers (MZIs) and coupled resonator optical waveguide (CROW). By dynamically reconfiguring the optical propagation path in the proposed chip, as many as six different types of optical functional structures have been obtained, which can achieve optical switch with ultra-high extinction ratio (ER), box-like interleaver, optical filters with tunable bandwidth, spectral shape and free spectral range (FSR) reconfigurabilities. Experimental results show that optical switch achieves an ER of 52 dB, optical interleaver achieves the shape factor about 1.32, in-band ripple of 0.2 dB and crosstalk of -21 dB. Meanwhile, as a reconfigurable optical filter, various spectral shapes such as Fano, flat-top, Lorentz, triangular, sinusoidal, square, tangent-like responses have also been obtained. In addition, by adopting different modulation schemes, bandstop microwave photonic filters (MPFs), lowpass MPFs and bandpass MPFs have been demonstrated. Our proposed chip could provide a simple and highly reconfigurable solution for various applications in optical communication, sensing and microwave photonics signal processing systems.


  • Frequency-Selectable Microwave Generation Based on On-Chip Switchable Spectral Shaping

    by Hongsheng Niu, Dongyu Wang, Shangqing Shi, Yuhang Liu, Yifei Chen, Jin Wang, Chen Guo, Wei Cheng, Guohua Hu, Yiping Cui, et al.

    Spectral shaping and wavelength-to-time mapping (SS-WTTM) has been proved as an effective method for the microwave signal generation. With the development of integrated photonic technology, the integrated spectral shaping chip is increasingly significant because of the advantages of power-efficiency, small footprint, etc. Here, we propose and experimentally demonstrate an on-chip spectral shaping scheme based on cascaded asymmetric Mach-Zender interferometers (AMZIs), which enables the generation of frequency-selectable microwave signals. In this scheme, n AMZIs are cascaded to generate 2nnnnnnnnnnnnnn-1 switchable free spectral ranges (FSRs), which are adopted to generate 2n-1 frequency-switchable microwave signals by using the SS-WTTM method. The microwave signal generation experiment was constructed by adopting a five-stage cascade AMZI chip. Experimental results show that 31 frequency-selectable microwave signals in the frequency range of 0.98 to 29.35 GHz with a frequency step interval of 0.98 GHz were generated successfully. The proposed scheme has the advantages of simplicity, high tunability, and easy expansion, which may have great potential for radar and telecommunication applications.


  • A Low Loss Silicon Photonic Switchable Optical Delay Line With Low Power Consumption

    by Jin Wang, Hongsheng Niu, Shangqing Shi, Wei Cheng, Yifei Chen, Chen Guo, Wanghua Zhu, Pengfei Wang, Guohua Hu, Yiping Cui, et al.

    Optical delay line (ODL) featuring low power consumption and low loss are very demanding for various applications such as optical communications, optical coherence tomography, and microwave photonic signal processing, etc. In this paper, we design, fabricate, and characterize a low loss silicon photonic switchable optical delay line chip with low power consumption based on well-designed spiral thermo-optical switches (STOS) and multi-mode spiral delay waveguide (MMSDW). The proposed 5-Bit silicon ODL can achieve a maximum delay of 1535.52 ps, with an average power consumption as low as 16.29 mW, and a low optical loss delay ratio of 0.006 dB/ps. It is noteworthy that all the optical switches in the proposed ODL have an extinction ratio larger than 25 dB with a low switching power below 2.7 mW, which is almost one order of magnitude lower than other reported silicon ODL. Furthermore, a compact footprint as small as 1.7 mm × 6.6 mm is achieved by our optimized design.


  • Compact Optical Beamforming Chip Using Broadband Continuously Tunable Delay Lines

    by Shangqing Shi, Dongdong Lin, Hongsheng Niu, Yifei Chen, Tong Lin, Guohua Hu, Binfeng Yun

    In this work, we present a wideband 1×4 continuously tunable microwave photonic beamforming chip based on integrated optical switching delay lines (OSDLs) cascade with properly designed tunable asymmetry Mach-Zehnder interferometer (AMZI). Simulation and experiment were conducted to achieve over 25 GHz bandwidth continuously tunable delay (0 ps ∼ 3.54 ps), which can sufficiently cover a 5-bit silicon OSDL's discrete delay step (3.54 ps). Simulations on microwave photonic beamforming were also carried out. Additionally, to enhance the compactness of the microwave photonic beamforming chip, we introduce a non-invasive calibration method that eliminates the need for optical power monitoring tap after each optical switch, this approach can reduce the chip's footprint and optical I/O ports by approximately 50%.


  • A High Performance Silicon Nitride Optical Delay Line With Good Expansibility

    by Dongdong Lin, Shangqing Shi, Wei Cheng, Pengcheng Liu, Mengjia Lu, Tong Lin, Guohua Hu, Binfeng Yun, Yiping Cui

    In this paper, based on the double strip silicon nitride platform, we designed and fabricated a low loss continuously tunable broadband optical delay line, which contains a 5-bit optical switched delay line and a single tunable optical ring resonator working at “off-resonance”. Optical double sideband modulation link measurement results show it can achieve continuous delay tuning of 395.5 ps and in-band delay fluctuations of about 4 ps and 1 ps were obtained in 8 GHz and 5 GHz working bandwidths, respectively. In addition, the proposed optical delay line has a low on-chip insertion loss of 3 dB and a very low optical loss delay ratio of 0.0022 dB/ps. Moreover, it's delay tuning range can be easily increased by cascading more thermo-optic switches. The delay bandwidth can be expanded by adopting the optical single sideband modulation or increasing the FSR of the optical ring resonator. This integrated tunable optical delay line with good overall performances and expand ability shows great potential for microwave photonic applications.


  • Non-Invasive Delay State Calibration of Silicon Optical Switching Delay Line

    by Shangqing Shi, Dongdong Lin, Pengcheng Liu, Guohua Hu, Tong Lin, Binfeng Yun, Yiping Cui

    Silicon optical switching delay line (OSDL) chip, which composed of optical switches cascaded with optical waveguides of different lengths, has the merits of broadband true time delay and high delay accuracy, and is one of the key components in microwave photonic beamforming system. Due to the inevitable manufacturing errors of silicon photonic chips, the driving voltages of the “through” and “cross” states of each optical switch in OSDL need to be calibrated separately to ensure properly switching among different delay states. In general, additional optical power monitor taps or variable optical attenuators (VOAs) can be added into OSDL to achieve the switching voltage calibration processes of all the optical switches. However, adding additional optical power monitor taps after each optical switch will increase the extra loss of the delay line, also the I/O ports will be greatly increased. Introducing silicon VOAs based on carrier injection in each delay stage of the silicon OSDL will increase the manufacturing cost and control complexity. Therefore, a simple and non-invasive calibration technique for all the optical switches in OSDL chip is greatly needed. Here, based on the interferograms induced by the cascade unbalanced Mach-Zehnder interferences formed in OSDL, we propose a simple and effective calibration method for silicon OSDL chip without introducing additional components. As a proof of concept, we calibrated and measured all the delay states of a 5-Bit silicon OSDL chip, and the measured results agree well with those obtained with optical power monitor taps.