Amit Pratap Singh
Amit Pratap Singh has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Avinashi Kapoor
University of Delhi
3 shared publications - Kailashpati Tripathi
Division of Agricultural Chemicals, ICAR-Indian Agricultural Research Institute, New Delhi, India
2 shared publications Shiv Shankar Gaur
Shivaji College , University of Delhi , Raja Garden , New Delhi 27 , India
2 shared publicationsA Li
1 shared publicationA Purkayastha
Department of Materials Science and Engineering, Rensselaer Polytechnic Institute, Troy, NY 12180, USA
1 shared publication- Amit Jain
Electronic Science, Rajdhani College, University of Delhi, New Delhi, INDIA
1 shared publication
Latest Publications
- 28 May 2025
- Published by Elsevier in High Energy Density Physics
- Vol. 56
Chaotic behavior of an accelerated electron driven by a non-autonomous Lorenz-Type Laser Field (LTLF)
- 28 May 2025
- Published by Elsevier in High Energy Density Physics
- Vol. 56
Chaotic behavior of an accelerated electron driven by a non-autonomous Lorenz-Type Laser Field (LTLF)
- 22 July 2024
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 203, 114758
Assessment of India's Green Hydrogen Mission and environmental impact
- 22 July 2024
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 203, 114758
Assessment of India's Green Hydrogen Mission and environmental impact
- 12 January 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 48 (38) , 14511-14526
Fuel efficiency and emissions reduction of hydroxy added gasoline fuel using HydroBoost technology
- 12 January 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 48 (38) , 14511-14526
Fuel efficiency and emissions reduction of hydroxy added gasoline fuel using HydroBoost technology
- RetractedOpen Access
- 4 January 2023
- Published by Oxford University Press (OUP) in Journal of AOAC INTERNATIONAL
- Vol. 106 (3) , 748-759
RETRACTED: Differentiation Between Humic and Non-Humic Substances Using Alkaline Extraction and Ultraviolet Spectroscopy
Although humic substances are the principal ingredients in processed humic products, there has been no practical way to determine if a material is humified, allowing fake products to be used by farmers instead of genuine humic substances. To develop a test method using conventional laboratory techniques to determine if a material is humified. A neutralized extract is prepared using the standardized extraction protocols specified in ISO 19822:2018(E). A portion of the extract is used to determine the concentration of dissolved organic matter on an ash-free basis. A portion of the remaining neutralized extract is diluted to a concentration of 30 mg/kg of dissolved organic matter and transferred to a quartz UV cuvette for ultraviolet-visible (UV-vis) spectroscopy. UV-Vis absorbance is recorded over a wavelength range of 220-500 nm at 5 nm intervals. The absorbance data are normalized by conversion to scaled absorbance, which is compared to a reference scaled absorbance spectral curve for humic substances to determine if the tested material is humic or non-humic. This method was able to differentiate legitimate humic substances from non-humic adulterants in a multiple laboratory validation study (p ≤ 0.05). This method allows regulatory laboratories to detect fake humic substance ingredients using common laboratory procedures and equipment.
- 4 January 2023
- Published by Oxford University Press (OUP) in Journal of AOAC INTERNATIONAL
- Vol. 106 (3) , 748-759
RetractedOpen AccessRETRACTED: Differentiation Between Humic and Non-Humic Substances Using Alkaline Extraction and Ultraviolet Spectroscopy
Although humic substances are the principal ingredients in processed humic products, there has been no practical way to determine if a material is humified, allowing fake products to be used by farmers instead of genuine humic substances. To develop a test method using conventional laboratory techniques to determine if a material is humified. A neutralized extract is prepared using the standardized extraction protocols specified in ISO 19822:2018(E). A portion of the extract is used to determine the concentration of dissolved organic matter on an ash-free basis. A portion of the remaining neutralized extract is diluted to a concentration of 30 mg/kg of dissolved organic matter and transferred to a quartz UV cuvette for ultraviolet-visible (UV-vis) spectroscopy. UV-Vis absorbance is recorded over a wavelength range of 220-500 nm at 5 nm intervals. The absorbance data are normalized by conversion to scaled absorbance, which is compared to a reference scaled absorbance spectral curve for humic substances to determine if the tested material is humic or non-humic. This method was able to differentiate legitimate humic substances from non-humic adulterants in a multiple laboratory validation study (p ≤ 0.05). This method allows regulatory laboratories to detect fake humic substance ingredients using common laboratory procedures and equipment.
- 12 October 2022
- Published by Walter de Gruyter GmbH in Zeitschrift für Naturforschung A
- Vol. 78 (1) , 89-95
Theoretical analysis and optimization of sensing parameters of surface plasmon resonance sensor
The right combination of substrate and metallic layer is very important to optimize the sensing parameters of surface plasmon resonance (SPR) sensors. These parameters are sensitivity, full width half maxima (FWHM) and reflectance minimum ( R min ) at resonance angle. It is shown in the present theoretical analysis that the right combination of substrate and metallic layer helps in reducing the number of layers in SPR multilayer structures without compromising the sensitivity of SPR sensors. The present study was performed on three layers and molybdenum disulfide (MoS 2 ) based four layer SPR structures. Gold (Au) and silver (Ag) were used as metallic layers and dense flint (SF11) glass and barium flint (BAF10) glass were used as substrate material. The best sensitivity value was achieved with the combination of Au and BAF10 in both three and four layer structure. The optimized values of FWHM and R min were obtained using the combination of Ag and SF11 in both three and four layer structures.
- 12 October 2022
- Published by Walter de Gruyter GmbH in Zeitschrift für Naturforschung A
- Vol. 78 (1) , 89-95
Theoretical analysis and optimization of sensing parameters of surface plasmon resonance sensor
The right combination of substrate and metallic layer is very important to optimize the sensing parameters of surface plasmon resonance (SPR) sensors. These parameters are sensitivity, full width half maxima (FWHM) and reflectance minimum ( R min ) at resonance angle. It is shown in the present theoretical analysis that the right combination of substrate and metallic layer helps in reducing the number of layers in SPR multilayer structures without compromising the sensitivity of SPR sensors. The present study was performed on three layers and molybdenum disulfide (MoS 2 ) based four layer SPR structures. Gold (Au) and silver (Ag) were used as metallic layers and dense flint (SF11) glass and barium flint (BAF10) glass were used as substrate material. The best sensitivity value was achieved with the combination of Au and BAF10 in both three and four layer structure. The optimized values of FWHM and R min were obtained using the combination of Ag and SF11 in both three and four layer structures.
- 24 May 2022
- Published by IOP Publishing in Physica Scripta
- Vol. 97 (6) , 065604
Study of electron acceleration induced by ultrashort and ultraintense x-ray free electron laser pulse in the presence of uniform axial magnetic field
There is a great interest in the application of ultraintense and ultrashort lasers in the area of accelerator physics. Recent advances in attosecond pulsed lasers have generated a new possibility in the production of high quality and high energy electron beams. The present work investigates the attosecond laser induced electron acceleration in the presence of an external magnetic field. The electron dynamics is studied with the help of linearly and circularly polarized light in vacuum medium. A similar trend in electron trajectory is observed in both polarizations with relatively more energetic electrons in circular polarization. It is found that the external magnetic field plays an important role to confine the electron motion in the laser field and increase the energy of accelerating electrons considerably.
- 24 May 2022
- Published by IOP Publishing in Physica Scripta
- Vol. 97 (6) , 065604
Study of electron acceleration induced by ultrashort and ultraintense x-ray free electron laser pulse in the presence of uniform axial magnetic field
There is a great interest in the application of ultraintense and ultrashort lasers in the area of accelerator physics. Recent advances in attosecond pulsed lasers have generated a new possibility in the production of high quality and high energy electron beams. The present work investigates the attosecond laser induced electron acceleration in the presence of an external magnetic field. The electron dynamics is studied with the help of linearly and circularly polarized light in vacuum medium. A similar trend in electron trajectory is observed in both polarizations with relatively more energetic electrons in circular polarization. It is found that the external magnetic field plays an important role to confine the electron motion in the laser field and increase the energy of accelerating electrons considerably.
- 1 June 2012
- Published by Elsevier in Atmospheric Research
- Vol. 109-110, 84-94
Characteristics of Tropospheric Gravity Waves using the Equatorial Atmosphere Radar at Koto Tabang (0.20°S, 100.32°E), Indonesia during CPEA -2 campaign
- 1 June 2012
- Published by Elsevier in Atmospheric Research
- Vol. 109-110, 84-94
Characteristics of Tropospheric Gravity Waves using the Equatorial Atmosphere Radar at Koto Tabang (0.20°S, 100.32°E), Indonesia during CPEA -2 campaign
- 1 January 2011
- Published by Taylor & Francis in Radiation Effects and Defects in Solids
- Vol. 166 (1) , 44-49
Effect of pit formation and surface roughness on size-dependent thermal conductivity of nanometer-thick semiconducting films
In this work, the thermal conductivity variation due to pit formation and surface roughness in nanometer-thick semiconducting films has been studied. It is shown that the thermal conductivity of thin films is reduced due to the presence of these effects in the films. This reduction in thermal conductivity is dependent on film thickness. The present analysis has been done on GaAs nanometer-thick films using the available experimental data.
- 1 January 2011
- Published by Taylor & Francis in Radiation Effects and Defects in Solids
- Vol. 166 (1) , 44-49
Effect of pit formation and surface roughness on size-dependent thermal conductivity of nanometer-thick semiconducting films
In this work, the thermal conductivity variation due to pit formation and surface roughness in nanometer-thick semiconducting films has been studied. It is shown that the thermal conductivity of thin films is reduced due to the presence of these effects in the films. This reduction in thermal conductivity is dependent on film thickness. The present analysis has been done on GaAs nanometer-thick films using the available experimental data.
- 11 December 2008
- Published by IOP Publishing in Nanotechnology
- Vol. 20 (2) , 025609
High-coercivity FePt nanoparticle assemblies embedded in silica thin films
The ability to process assemblies using thin film techniques in a scalable fashion would be a key to transmuting the assemblies into manufacturable devices. Here, we embed FePt nanoparticle assemblies into a silica thin film by sol-gel processing. Annealing the thin film composite at 650 degrees C transforms the chemically disordered fcc FePt phase into the fct phase, yielding magnetic coercivity values H(c)>630 mT. The positional order of the particles is retained due to the protection offered by the silica host. Such films with assemblies of high-coercivity magnetic particles are attractive for realizing new types of ultra-high-density data storage devices and magneto-composites.
- 11 December 2008
- Published by IOP Publishing in Nanotechnology
- Vol. 20 (2) , 025609
High-coercivity FePt nanoparticle assemblies embedded in silica thin films
The ability to process assemblies using thin film techniques in a scalable fashion would be a key to transmuting the assemblies into manufacturable devices. Here, we embed FePt nanoparticle assemblies into a silica thin film by sol-gel processing. Annealing the thin film composite at 650 degrees C transforms the chemically disordered fcc FePt phase into the fct phase, yielding magnetic coercivity values H(c)>630 mT. The positional order of the particles is retained due to the protection offered by the silica host. Such films with assemblies of high-coercivity magnetic particles are attractive for realizing new types of ultra-high-density data storage devices and magneto-composites.
- 1 December 2006
- Published by Taylor & Francis in Journal of Modern Optics
- Vol. 53 (18) , 2657-2671
Effect of dye doping and multilayer structures in polyurethane waveguides
The effect of dye doping and four-layer structuring in polyurethane-based waveguides is presented. The waveguides were fabricated using a dip coating method and characterized by the prism coupling technique. It was found that using these two effects, the various optical parameters of polyurethane waveguides, e.g. refractive index, birefringence, propagation losses, number of modes, can be suitably controlled. Polyurethane films are highly transparent (above 90%) in the UV-VIS region and this high transparency was found to be present in dye-doped polyurethane films.
- 1 December 2006
- Published by Taylor & Francis in Journal of Modern Optics
- Vol. 53 (18) , 2657-2671
Effect of dye doping and multilayer structures in polyurethane waveguides
The effect of dye doping and four-layer structuring in polyurethane-based waveguides is presented. The waveguides were fabricated using a dip coating method and characterized by the prism coupling technique. It was found that using these two effects, the various optical parameters of polyurethane waveguides, e.g. refractive index, birefringence, propagation losses, number of modes, can be suitably controlled. Polyurethane films are highly transparent (above 90%) in the UV-VIS region and this high transparency was found to be present in dye-doped polyurethane films.