MKMoussa Khalfallah

Moussa Khalfallah

*This is an algorithmically generated author record based on publicly available information.

Moussa Khalfallah has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Etude expérimentale et modélisation numérique du comportement thermomécanique d’un sandwich agrocomposite à base de fibres longues de lin

    by Moussa Khalfallah

    Afin de réduire les déchets et les émissions de CO2, la demande des constructeurs automobiles a évolué vers l'utilisation de nouveaux matériaux biosourcés permettant d'alléger les véhicules et diminuer leur consommation en carburant. Dans ce contexte, la thèse a eu pour objectif de réaliser un panneau sandwich léger et résistant renforcé par des fibres longues de lin pour des applications semistructurelles automobiles. Outre la recherche bibliographique, le travail est réparti en trois volets : la mise en œuvre, la caractérisation et la modélisation du comportement mécanique du panneau sandwich. Les peaux composites sont renforcées par un nouveau renfort « Flaxtape », qui est un voile de fibres longues de lin unidirectionnelles et ne contenant aucune filature en trame. La matrice est une résine thermodurcissable aqueuse permettant un temps de réticulation très court et une bonne processabilité. Les peaux composites et les panneaux sandwichs dérivés sont élaborés à l'aide d'un procédé de thermocompression respectant des cycles de fabrication industriels. La compréhension et l'optimisation des paramètres entrant en jeu dans leur élaboration et leur mise en œuvre (cycle de cuisson, température, séchage, densification, fraction volumique de fibres, taux de réticulation et séquence d'empilement) passent par une série de caractérisations thermomécaniques et physicochimiques. Les résultats obtenus montrent les bonnes propriétés mécaniques spécifiques du panneau sandwich à différentes températures. D'autre part, le panneau sandwich en Flaxpreg est destiné à la réalisation d'un plancher de coffre de véhicule. La modélisation numérique du comportement mécanique du panneau sandwich a permis de prédire sa réponse mécanique lorsqu'il est mis en service à différentes positions dans le coffre. Afin de simplifier la géométrie du panneau sandwich et de réduire le temps de calcul, un modèle d'homogénéisation analytique de l'âme en nid d'abeille a été utilisé pour réaliser cette étude.

  • Open Access

    Inorganic Fillers and Their Effects on the Properties of Flax/PLA Composites after UV Degradation

    by Moumita Sit, Saeid Dashatan, Zhongyi Zhang, Hom Nath Dhakal, Moussa Khalfallah, Nicolas Gamer, Jarren Ling

    The present investigation seeks to assess the impact of fillers on the mechanical characteristics of entirely biodegradable composites, introducing an advanced solution to fulfil long-term durability demands within point-of-purchase (POP) industries. The inclusion of calcium carbonate (CaCO3) fillers on the various properties of the flax fibre-reinforced composites, after accelerated irradiation in an ultraviolet (UV) radiation exposure has been investigated in the present study. Different types of flax fibre-reinforced poly lactic acid (PLA) biocomposites (with and without filler) were fabricated. The mechanical (tensile and flexural), and physical properties of the specimens were assessed after 500 h of exposure to accelerated UV irradiation of 0.48 W/m2 at 50 °C and were compared with those of the unexposed specimens. The results indicate that the presence of the inorganic filler significantly improved the performance of the biocomposites compared to the unfilled biocomposites after UV exposure. After adding 20% of fillers, the tensile strength was increased by 2% after UV degradation, whereas the biocomposite without filler lost 18% of its strength after UV exposure. This can be attributed to the change in the photo-degradation of the PLA due to the presence of the CaCO3 filler, which acts as a safeguard against UV light penetration by creating a protective barrier. The scanning electron microscopy (SEM) images of the degraded specimen surface show substantial difference in the surface topography of the composites with and without fillers.


  • Open Access

    Influence of accelerated weathering on the properties of flax reinforced PLA biocomposites

    by Moumita Sit, Jarren Ling, Chulin Jiang, Zhongyi Zhang, Moussa Khalfallah, Fanny Ioos, Erwan Grossmann, Hom Nath Dhakal


  • Open Access

    Moisture Absorption Effects on the Mechanical Properties of Sandwich Biocomposites with Cork Core and Flax/PLA Face Sheets

    by Hom Nath Dhakal, Chulin Jiang, Moumita Sit, Zhongyi Zhang, Moussa Khalfallah, Erwan Grossmann

    The aim of this study was to evaluate the moisture absorption behaviour and its influence on the mechanical properties of newly developed sandwich biocomposites with flax fibre-reinforced poly-lactic acid (PLA) face sheets and soft cork as the core material. Three different types of sandwich biocomposite laminates comprised of different layup configurations, namely, non-woven flax/PLA (Sample A), non-woven flax/PLA and cork as core (Sample B) and non-woven flax/paper backing/PLA, cork as core (Sample C), were fabricated. In order to evaluate the influence of moisture ingress on the mechanical properties, the biocomposites were immersed in seawater for a period of 1200 h. The biocomposites (both dry and water immersed) were then subjected to tensile, flexural and low-velocity falling weight impact tests. It was observed from the experimental results that the moisture uptake significantly influenced the mechanical properties of the biocomposites. The presence of the cork and paper in sample C made it more susceptible to water absorption, reaching a value of 34.33%. The presence of cork in the core also has a considerable effect on the mechanical, as well as energy dissipation, behaviours. The results of sample A exhibited improved mechanical performance in both dry and wet conditions compared to samples B and C. Sample A exhibits 32.6% more tensile strength and 81.4% more flexural strength in dry conditions than that in sample C. The scanning electron microscopy (SEM) and X-ray micro-CT images revealed that the failure modes observed are a combination of matrix cracking, core crushing and face core debonding. The results from this study suggest that flax/PLA sandwich biocomposites can be used in various lightweight applications with improved environmental benefits.