Lingmei Ni
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lingmei Ni has a total of 67 co-authors. Here are the top co-authors by number of shared publications:
- Ulrike Ingrid Kramm
TU Darmstadt
9 shared publications Markus Kübler
Department of Chemistry, Catalysts and Electrocatalysts Technical University of Darmstadt Darmstadt Germany
4 shared publications- Vladislav Gridin
Department of Chemistry, Catalysts and Electrocatalysts Technical University of Darmstadt Darmstadt Germany
3 shared publications - Pascal Theis
Technical University Darmstadt
2 shared publications - Stephen Daniel Paul
Catalysts and Electrocatalysts, Department of Chemistry, Eduard-Zintl-Insitute for Inorganic and Physical Chemistry Technical University Darmstadt Otto-Berndt-Str. 3 64287 Darmstadt Germany
2 shared publications - Adam Hugh Clark
Paul Scherrer Institute
1 shared publication
Latest Publications
- Open Access
- 29 January 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Origin of Instability in Fe-N-C Oxygen-Depolarized Cathodes in HCl Electrolysis
Oxygen depolarized cathode (ODC) catalysts, especially for HCl electrolysis, face challenging corrosive environments that narrow the choice of materials to the current state-of-theart RhxSy/C. Nitrogen-coordinated Fe on carbon defect surfaces, commonly referred to as Fe-N-C, offers a low-cost, highly active, and Cl-poisoning-resistant alternative. However, its long-term durability remains unexplored under the unique operating conditions of the HCl electrolysis. To address this, we investigate the stability of Fe-N-C under simulated uncontrolled shutdowns, mimicking the harsh transients of industrial operation. Post-mortem analysis of Fe-N-C using Xray absorption and 57 Fe Mössbauer spectroscopy reveals a transition from the Fe-N4 coordinating environment to Fe2O3. Despite these structural changes, Fe-N-C maintained a competitive low voltage of 1.33 V at 0.5 A cm⁻ 2 , consistent with a relatively low fraction of sites being affected. Accelerated stress tests simulating uncontrolled shutdown conditions, combined with Raman spectroscopy, showed that Fe-N-C and RhxSy/C share a common carbon degradation mechanism. This work demonstrates the viability of Fe-N-C as a robust ODC catalyst and provides guidance for improving its durability by mitigating demetallation and carbon oxidation.
- 29 January 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessOrigin of Instability in Fe-N-C Oxygen-Depolarized Cathodes in HCl Electrolysis
Oxygen depolarized cathode (ODC) catalysts, especially for HCl electrolysis, face challenging corrosive environments that narrow the choice of materials to the current state-of-theart RhxSy/C. Nitrogen-coordinated Fe on carbon defect surfaces, commonly referred to as Fe-N-C, offers a low-cost, highly active, and Cl-poisoning-resistant alternative. However, its long-term durability remains unexplored under the unique operating conditions of the HCl electrolysis. To address this, we investigate the stability of Fe-N-C under simulated uncontrolled shutdowns, mimicking the harsh transients of industrial operation. Post-mortem analysis of Fe-N-C using Xray absorption and 57 Fe Mössbauer spectroscopy reveals a transition from the Fe-N4 coordinating environment to Fe2O3. Despite these structural changes, Fe-N-C maintained a competitive low voltage of 1.33 V at 0.5 A cm⁻ 2 , consistent with a relatively low fraction of sites being affected. Accelerated stress tests simulating uncontrolled shutdown conditions, combined with Raman spectroscopy, showed that Fe-N-C and RhxSy/C share a common carbon degradation mechanism. This work demonstrates the viability of Fe-N-C as a robust ODC catalyst and provides guidance for improving its durability by mitigating demetallation and carbon oxidation.
- Open Access
- 10 October 2025
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (4)
Spin Matters: A Multidisciplinary Roadmap to Understanding Spin Effects in Oxygen Evolution Reaction During Water Electrolysis
A central challenge in water electrolysis lies with the oxygen evolution reaction (OER) where the formation of molecular oxygen (O 2 ) is hindered by the constraint of angular momentum conservation. While the reactants OH − or H 2 O are diamagnetic (DM), the O 2 product has a paramagnetic (PM) triplet ground state, requiring a change in spin configuration when being formed. This constraint has prompted interest in spin‐selective catalysts as a means to facilitate OER. In this context, the roles of magnetism and chirality‐induced spin selectivity (CISS) in promoting the OER reaction have recently been investigated through both theoretical and experimental studies. However, pinpointing the key principles and their relative contribution in mediating spin‐enhancement remains a significant challenge. This roadmap offers a forward‐looking perspective on current experimental trends and theoretical developments in spin‐enhanced OER electrocatalysis and outlines strategic directions for integrating incisive experiments and operando approaches with computational modeling to disentangle key mechanisms. By providing a conceptual framework and identifying critical knowledge gaps, this perspective aims to guide researchers toward dedicated experimental and computational studies that will deepen the understanding of spin‐induced OER enhancement and accelerate the development of next‐generation catalysts.
- 10 October 2025
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (4)
Open AccessSpin Matters: A Multidisciplinary Roadmap to Understanding Spin Effects in Oxygen Evolution Reaction During Water Electrolysis
A central challenge in water electrolysis lies with the oxygen evolution reaction (OER) where the formation of molecular oxygen (O 2 ) is hindered by the constraint of angular momentum conservation. While the reactants OH − or H 2 O are diamagnetic (DM), the O 2 product has a paramagnetic (PM) triplet ground state, requiring a change in spin configuration when being formed. This constraint has prompted interest in spin‐selective catalysts as a means to facilitate OER. In this context, the roles of magnetism and chirality‐induced spin selectivity (CISS) in promoting the OER reaction have recently been investigated through both theoretical and experimental studies. However, pinpointing the key principles and their relative contribution in mediating spin‐enhancement remains a significant challenge. This roadmap offers a forward‐looking perspective on current experimental trends and theoretical developments in spin‐enhanced OER electrocatalysis and outlines strategic directions for integrating incisive experiments and operando approaches with computational modeling to disentangle key mechanisms. By providing a conceptual framework and identifying critical knowledge gaps, this perspective aims to guide researchers toward dedicated experimental and computational studies that will deepen the understanding of spin‐induced OER enhancement and accelerate the development of next‐generation catalysts.
- Open Access
- 15 June 2023
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 5 (3) , 034009
Role of Fe in the hydrogen oxidation reaction in a NiFe-based catalyst: an in situ Mössbauer spectroscopic investigation
Nickel-based catalysts reach a high activity for the hydrogen oxidation reaction (HOR) in anion exchange membrane fuel cells. While incorporation of iron significantly decreases the HOR overpotential on NiFe-based catalysts, the reason for the enhanced activity remains only partially understood. For the first time, in situ 57Fe Mössbauer spectroscopy is used to gain insights into the iron-related composition at different potentials. The aim is to evaluate which changes occur on iron at potentials relevant for the HOR on the active Ni sites. It is found that different pre-conditionings at low potentials stabilize the iron at a low oxidation state as compared to the as-prepared catalyst powder. It is likely that the lower average oxidation state enables a higher exchange current density and a more efficient OH adsorption, which make the Volmer step much faster in the HOR. Insights from in situ Mössbauer spectroscopy enlighten the role of iron in the nickel-iron catalyst, paving the way for developing improved Ni-based catalysts for HOR catalysis.
- 15 June 2023
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 5 (3) , 034009
Open AccessRole of Fe in the hydrogen oxidation reaction in a NiFe-based catalyst: an in situ Mössbauer spectroscopic investigation
Nickel-based catalysts reach a high activity for the hydrogen oxidation reaction (HOR) in anion exchange membrane fuel cells. While incorporation of iron significantly decreases the HOR overpotential on NiFe-based catalysts, the reason for the enhanced activity remains only partially understood. For the first time, in situ 57Fe Mössbauer spectroscopy is used to gain insights into the iron-related composition at different potentials. The aim is to evaluate which changes occur on iron at potentials relevant for the HOR on the active Ni sites. It is found that different pre-conditionings at low potentials stabilize the iron at a low oxidation state as compared to the as-prepared catalyst powder. It is likely that the lower average oxidation state enables a higher exchange current density and a more efficient OH adsorption, which make the Volmer step much faster in the HOR. Insights from in situ Mössbauer spectroscopy enlighten the role of iron in the nickel-iron catalyst, paving the way for developing improved Ni-based catalysts for HOR catalysis.
- Open Access
Relation between half‐cell and fuel cell activity and stability of FeNC catalysts for the oxygen reduction reaction
FeNC catalysts are promising substitutes of platinum‐type catalysts for the oxygen reduction reaction (ORR). While previous research disclosed that high pyrolysis temperatures are required to achieve good stability, it was identified that a trade‐off needs to be made regarding the active site density. The central question is, if a good stability can also be reached at milder pyrolysis conditions but longer duration retaining more active sites, while enabling the defect‐rich carbon to heal during a long residence time? To address this, a variation of pyrolysis temperatures and durations is used in FeNC fabrication. Carbon morphology and iron species are characterized by Raman spectroscopy and Mössbauer spectroscopy, respectively. Fuel cell (FC) activity and stability data are acquired. The results are compared to ORR activity and selectivity data from rotating ring disc electrode experiments and resulting durability in accelerated stress tests mimicking the load cycle and start‐up and shut‐down cycle conditions. It is discussed how pyrolysis temperature and duration affect FC activity and stability. But, more important, the results connect the pyrolysis conditions to the required accelerated stress test protocol combination to enable a prediction of the catalyst stability in fuel cells.
Open AccessRelation between half‐cell and fuel cell activity and stability of FeNC catalysts for the oxygen reduction reaction
FeNC catalysts are promising substitutes of platinum‐type catalysts for the oxygen reduction reaction (ORR). While previous research disclosed that high pyrolysis temperatures are required to achieve good stability, it was identified that a trade‐off needs to be made regarding the active site density. The central question is, if a good stability can also be reached at milder pyrolysis conditions but longer duration retaining more active sites, while enabling the defect‐rich carbon to heal during a long residence time? To address this, a variation of pyrolysis temperatures and durations is used in FeNC fabrication. Carbon morphology and iron species are characterized by Raman spectroscopy and Mössbauer spectroscopy, respectively. Fuel cell (FC) activity and stability data are acquired. The results are compared to ORR activity and selectivity data from rotating ring disc electrode experiments and resulting durability in accelerated stress tests mimicking the load cycle and start‐up and shut‐down cycle conditions. It is discussed how pyrolysis temperature and duration affect FC activity and stability. But, more important, the results connect the pyrolysis conditions to the required accelerated stress test protocol combination to enable a prediction of the catalyst stability in fuel cells.
- 19 October 2021
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2021-02 (39) , 1152
Simple Polypyrrole Based Preparation for Fe-N-C Catalysts for the Oxygen Reduction Reaction
- 19 October 2021
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2021-02 (39) , 1152
Simple Polypyrrole Based Preparation for Fe-N-C Catalysts for the Oxygen Reduction Reaction
- 19 October 2021
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2021-02 (39) , 1151
Is the Degradation of Fe-N-C Catalysts in Proton Exchange Fuel Cells Caused By Hydrogen Peroxide Formation?
In fuel cells chemical energy is directly converted into electricity. Based on this, fuel cells are attractive for automotive propulsion. However, a major drawback that hinders the widespread use of fuel cells are the costs. A major cost contributor in today's state of the art fuel cells is the catalyst; namely platinum and its alloys that are used to catalyse the hydrogen oxidation reaction and the oxygen reduction reaction (ORR) [1]. Most of the expensive metal is required for the cathodic ORR. However, Fe-N-C catalysts are a potential alternative to Pt/C as they reach promising activity while the stability still needs to be improved. There seems to be a trade-off between activity and stability for this kind of catalysts. Beside other causes of degradation, it is discussed that hydrogen peroxide formation is one of the driving forces [2]. While molecular FeN4 centres are assumed to reduce oxygen to water, other phases are suggested to contribute to hydrogen peroxide formation. Such side phases are e.g. iron or iron carbide which are found in the catalysts after high temperature pyrolysis or if insufficient acid leaching was applied [3]. However, there is no systematic study if under fuel cell conditions indeed hydrogen peroxide formation from these side phases is at the origin of instability or maybe the leaching of iron species (from these side phases) with subsequently induced Fenton's reaction might cause the degradation. The knowledge on this is required for future catalyst design and therefore given attention in this work. In order to address this point, small quantities of an FeNC catalyst were post-modified with different metals as e.g. Pt, Pd, Ag in order to tune the selectivity for hydrogen peroxide formation of the resulting catalyst while still keeping the iron-related composition the same. The catalysts were characterized by cyclic voltammetry and rotating ring disc electrode experiments in order to see to what extent specific adsorption occurs and to determine the ORR activity and selectivity in aqueous electrolyte (0.1M H2SO4). Besides, polarization curves were measured in H2/O2 fuel cells and potentiostatic stability tests (12h) were performed at U = 0.6 V to identify activity and stability under operating conditions. We will discuss to what extent hydrogen peroxide formation correlates with the degradation of FeNC catalysts in proton exchange fuel cells. References: [1] B. D. James, D. A. DeSantis et al., Department of Energy, December (2018), Strategic Analysis. [2] C. H. Choi, F. Jaouen et al., Energy Environ. Sci. 11 (2018) 3176-3182. [3] U. I. Kramm, S. Wagner et al., Adv. Materials. 31 (2019) 1805623.
- 19 October 2021
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2021-02 (39) , 1151
Is the Degradation of Fe-N-C Catalysts in Proton Exchange Fuel Cells Caused By Hydrogen Peroxide Formation?
In fuel cells chemical energy is directly converted into electricity. Based on this, fuel cells are attractive for automotive propulsion. However, a major drawback that hinders the widespread use of fuel cells are the costs. A major cost contributor in today's state of the art fuel cells is the catalyst; namely platinum and its alloys that are used to catalyse the hydrogen oxidation reaction and the oxygen reduction reaction (ORR) [1]. Most of the expensive metal is required for the cathodic ORR. However, Fe-N-C catalysts are a potential alternative to Pt/C as they reach promising activity while the stability still needs to be improved. There seems to be a trade-off between activity and stability for this kind of catalysts. Beside other causes of degradation, it is discussed that hydrogen peroxide formation is one of the driving forces [2]. While molecular FeN4 centres are assumed to reduce oxygen to water, other phases are suggested to contribute to hydrogen peroxide formation. Such side phases are e.g. iron or iron carbide which are found in the catalysts after high temperature pyrolysis or if insufficient acid leaching was applied [3]. However, there is no systematic study if under fuel cell conditions indeed hydrogen peroxide formation from these side phases is at the origin of instability or maybe the leaching of iron species (from these side phases) with subsequently induced Fenton's reaction might cause the degradation. The knowledge on this is required for future catalyst design and therefore given attention in this work. In order to address this point, small quantities of an FeNC catalyst were post-modified with different metals as e.g. Pt, Pd, Ag in order to tune the selectivity for hydrogen peroxide formation of the resulting catalyst while still keeping the iron-related composition the same. The catalysts were characterized by cyclic voltammetry and rotating ring disc electrode experiments in order to see to what extent specific adsorption occurs and to determine the ORR activity and selectivity in aqueous electrolyte (0.1M H2SO4). Besides, polarization curves were measured in H2/O2 fuel cells and potentiostatic stability tests (12h) were performed at U = 0.6 V to identify activity and stability under operating conditions. We will discuss to what extent hydrogen peroxide formation correlates with the degradation of FeNC catalysts in proton exchange fuel cells. References: [1] B. D. James, D. A. DeSantis et al., Department of Energy, December (2018), Strategic Analysis. [2] C. H. Choi, F. Jaouen et al., Energy Environ. Sci. 11 (2018) 3176-3182. [3] U. I. Kramm, S. Wagner et al., Adv. Materials. 31 (2019) 1805623.
- Open Access
- 24 March 2021
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 23 (15) , 9147-9157
57Fe-Enrichment effect on the composition and performance of Fe-based O2-reduction electrocatalysts
In this work, we study how the performance and composition of platinum-group metal free catalysts of the Fe–N–C type are affected upon employing 57Fe-enriched precursors in their synthesis.
- 24 March 2021
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 23 (15) , 9147-9157
Open Access57Fe-Enrichment effect on the composition and performance of Fe-based O2-reduction electrocatalysts
In this work, we study how the performance and composition of platinum-group metal free catalysts of the Fe–N–C type are affected upon employing 57Fe-enriched precursors in their synthesis.
- 1 September 2019
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2019-02 (35) , 1606
Computational Analysis of Relative Graphene Layer Orientations Around FeN2+2 Sites for ORR
Proton exchange fuel cells (PEFCs) are a promising technology for energy conversion, but are not yet commercialized due to highly expensive platinum as state-of-the-art catalyst for the cathodic oxygen reduction reaction (ORR). As low-cost materials with earth abundant metals, non-precious metal and nitrogen doped carbon catalysts (Me-N-C) have become a viable alternative for platinum. Encouraging results were especially achieved with the use of iron as the metal center.[1] Me-N-C catalysts are obtained from pyrolysis of different metal, nitrogen and carbon precursors, which results in highly amorphous structures. The latter causes difficulties for the spectroscopic characterization of the active sites. Thus the exact chemical nature of the active center and the oxygen reduction reaction (ORR) mechanism are still being debated. [2] So far, three sites were proposed as possible contributors to the ORR activity. In Mössbauer spectroscopy they give rise to the D1, D2 and D3 doublets. They are all assigned to some type of FeN4 centers that are either integrated in graphene layers (D1: FeN4) or situated between two graphene layers (D2 and D3: FeN2+2). [3] While in the case of the D1 doublet, FeN4 macrocycles seem to work well as a model system, in the case of the FeN2+2 sites it is difficult to find suitable molecular model systems as references for the interpretation of the Mössbauer data. Furthermore, in the literature this site is often displayed as a flat structure. However, it remains unclear to what extent the graphene layers could possibly be tilted against each other. In this contribution, we will use density functional theory calculations to determine structure-property relationships of FeN2+2 site models with different Fe coordination environments – in particular the angle between adjacent graphene layers – with respect to relative energy, preferred spin state, Mössbauer spectroscopic parameters, and likely reaction intermediates for ORR. [1] Szakacs, C.E. et al., Phys. Chem. Chem. Phys., 2014, 16, 13654. [2] Kramm, U.I. et al., Adv. Mater., 2019, 1805623. [3] Kramm, U.I. et al., Phys. Chem. Chem. Phys., 2012, 14, 11673–11688.
- 1 September 2019
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2019-02 (35) , 1606
Computational Analysis of Relative Graphene Layer Orientations Around FeN2+2 Sites for ORR
Proton exchange fuel cells (PEFCs) are a promising technology for energy conversion, but are not yet commercialized due to highly expensive platinum as state-of-the-art catalyst for the cathodic oxygen reduction reaction (ORR). As low-cost materials with earth abundant metals, non-precious metal and nitrogen doped carbon catalysts (Me-N-C) have become a viable alternative for platinum. Encouraging results were especially achieved with the use of iron as the metal center.[1] Me-N-C catalysts are obtained from pyrolysis of different metal, nitrogen and carbon precursors, which results in highly amorphous structures. The latter causes difficulties for the spectroscopic characterization of the active sites. Thus the exact chemical nature of the active center and the oxygen reduction reaction (ORR) mechanism are still being debated. [2] So far, three sites were proposed as possible contributors to the ORR activity. In Mössbauer spectroscopy they give rise to the D1, D2 and D3 doublets. They are all assigned to some type of FeN4 centers that are either integrated in graphene layers (D1: FeN4) or situated between two graphene layers (D2 and D3: FeN2+2). [3] While in the case of the D1 doublet, FeN4 macrocycles seem to work well as a model system, in the case of the FeN2+2 sites it is difficult to find suitable molecular model systems as references for the interpretation of the Mössbauer data. Furthermore, in the literature this site is often displayed as a flat structure. However, it remains unclear to what extent the graphene layers could possibly be tilted against each other. In this contribution, we will use density functional theory calculations to determine structure-property relationships of FeN2+2 site models with different Fe coordination environments – in particular the angle between adjacent graphene layers – with respect to relative energy, preferred spin state, Mössbauer spectroscopic parameters, and likely reaction intermediates for ORR. [1] Szakacs, C.E. et al., Phys. Chem. Chem. Phys., 2014, 16, 13654. [2] Kramm, U.I. et al., Adv. Mater., 2019, 1805623. [3] Kramm, U.I. et al., Phys. Chem. Chem. Phys., 2012, 14, 11673–11688.