TLTao Liang

Tao Liang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Tao Liang has a total of 59 co-authors. Here are the top co-authors by number of shared publications:

  • Hao Wan

    Biosensor National Special Laboratory, Key Laboratory of Biomedical Engineering of Ministry of Education, Department of Biomedical Engineering, Zhejiang University, Hangzhou, 310027, China

    4 shared publications
  • Ping Wang

    Biosensor National Special Laboratory, Key Laboratory for Biomedical Engineering of Education Ministry, Zhejiang Key Laboratory of Intelligent Sensing Technology and Advanced Medical Instrument and Key Laboratory for Biomedical Engineering of Ministry of Education, College of Biomedical Engineering & Instrument Science, Zhejiang University, Hangzhou 310027, China

    4 shared publications
  • Liubing Kong

    Biosensor National Special Laboratory, Key Laboratory for Biomedical Engineering of Ministry of Education, Department of Biomedical Engineering, Zhejiang University, Hangzhou, 310027, China

    3 shared publications
  • Yong Qiu

    Binjiang Institute of Zhejiang University, Hangzhou, 310053, China

    3 shared publications
  • Cheng-Wen He

    Department of Chemistry, Zhejiang-Israel Joint Laboratory of Self-Assembling Functional Materials, ZJU-Hangzhou Global Scientific and Technological Innovation Center, School of Medicine, Zhejiang University, Hangzhou, China

    2 shared publications
  • Chiyu Ma

    Xi'an Institute of Applied Optics, Xi'an, 710065, China

    2 shared publications

Latest Publications

  • Open Access

    Synergistic effects of nicotine and hyperlipidemia induce cardiac damage via dynamic cardiomyocyte-based biosensing.

    by Cheng-Wen He, Xiaohuan Guo, Tao Liang, Pan Chen, Kaiqiang Li, Aibo Xu, Ke Hao, Ning Hu, Zhen Wang

    Cigarette smoking and hyperlipidemia are major risk factors for cardiovascular disease. However, the mechanisms underlying their synergistic cardiotoxic effects remain insufficiently elucidated, particularly at the cellular electrophysiological level. To address this, we developed an electrophysiological biosensing platform to establish a real-time co-exposure model that simulates the combined stress of nicotine and palmitic acid-induced hyperlipidemia on the primary rat cardiomyocytes. This model enabled continuous, non-invasive monitoring and quantitative analysis of field potential under individual and combined conditions. Our results revealed a distinct concentration-dependent effect of nicotine on cardiomyocytes: low-dose nicotine induced transient and reversible electrophysiological suppression, while high concentrations triggered severe arrhythmias and cell death. Critically, the co-exposure model revealed that a hyperlipidemic state significantly sensitizes cardiomyocytes to nicotine, markedly exacerbating arrhythmogenesis and compromising cell viability compared to nicotine alone. Moreover, nicotine withdrawal experiments showed that the electrophysiological damage induced by moderate nicotine exposure was reversible, whereas the adverse effects of high-dose nicotine exposure were largely irreversible. This study establishes an in vitro model to investigate the multifactorial cardiotoxicity, and provides a predictive platform for risk stratification and therapeutic intervention in smoking- and/or diet-related cardiovascular diseases.


  • Open Access

    Single bioaerosol characterizations based on optical tweezers

    by Qianwen Ying, Cuihong Li, Chaoxiong He, Tao Liang, Yunjie Shi, Huizhu Hu

    Bioaerosols, including bacteria, viruses, pollens, and fungal spores, play critical roles in global biosecurity, impacting human living environments and daily activities. The precise and in situ measurement of single bioaerosols represents a rigorous way to characterize their properties. Optical tweezers, which enable the stable trapping and precise control of single nanoparticles for in situ measurements and the study of their temporal evolution, have gained increasing attention in bioaerosol research. This Perspective systematically introduces the emerging field of single bioaerosol characterization based on optical tweezers. It gives a concise overview of the basic principle for trapping particles with different properties based on mechanical models of optical traps. It then reviews various applications of optical tweezers in the precise characterization of single bioaerosols, including their morphology, mass, chemical composition, and time evolution, through the spectral, spatial, or temporal analysis of optical scattering signals. This Perspective concludes by envisioning the future prospects for enhancing the practical application of bioaerosols. It suggests that future development directions should focus on enhancing trapping efficiency, increasing measurement throughput, and enhancing complex signal analysis capability. It also highlights their exciting potential in preventing disease transmission by identifying pathogens conveyed through bioaerosols.


  • Energy stress induced cardiac autophagy detection via a chronic and dynamic cardiomyocytes-based biosensing platform

    by Cheng-Wen He, Keda Shi, Tao Liang, Haote Han, Liang Chen, Xiaohuan Guo, Jie Chen, Kaiqiang Li, Ke Hao, Yuqun Cai, et al.


  • A light-addressable potentiometric sensor-based extracellular calcium dynamic monitoring and imaging platform for cellular calcium channel drug evaluation

    by Shichao Tian, Chiyu Ma, Yuxuan Zhu, Qihui Xu, Jianguo Wu, Yong Qiu, Tao Liang, Guangqing Ren, Zhuoru Huang, Xianyou Sun, et al.


  • Label-free and highly-sensitive detection of calcium ions using a silicon-on-sapphire light-addressable potentiometric sensor

    by Chiyu Ma, Yong Qiu, Tao Liang, Nan Jiang, Liubing Kong, Jianguo Wu, Xianyou Sun, Guangqing Ren, Xinwei Wei, Ping Wang, et al.


  • Open Access

    Yoctonewton force detection based on optically levitated oscillator

    by Tao Liang, Shaochong Zhu, Peitong He, Zhiming Chen, Yingying Wang, Cuihong Li, Zhenhai Fu, Xiaowen Gao, Xinfan Chen, Nan Li, et al.

    • Allan variance is introduced to evaluate the stability of the optically optomechanical system for actual force detection performance. • The system obtains a force detection sensitivity of 4.34 zN/Hz1/2 at 7.9 × 10−9 mbar under parametric feedback cooling, which is the best force sensitivity in a levitated optomechanical system so far. • The optimal measurement time is 2751 s, and the force detection resolution corresponding to this time scale is approximately 166.40 ± 55.48 yN, which is also the best force resolution in a levitated optomechanical system so far.


  • Silicone-Rubber Based Multiplex Ion-Sensitive Light-Addressable Potentiometric Sensor (ISLAPS) System for Physiological Ions Detection

    by Tao Liang, Shuqi Zhou, Xinyi Wang, Nan Jiang, Yong Qiu, Wencheng Lin, Hao Wan, Ping Wang

    Introduction Light-addressable potentiometric sensor (LAPS) is a field-effect chemical sensor with the ability of spatial resolution proposed by Hafeman [1] and has an electrolyte-insulator-semiconductor (EIS) structure. With the illumination of focused light, photocurrent can be generated locally, providing the information of surface potential. As a member of potentiometric sensors, technologies for ion-selective electrodes (ISEs) and ion-sensitive field-effect transistor (ISFET) are also applicable to LAPS. For example, by depositing the ion-sensitive membrane (ISM) on the surface of the LAPS, an ion-sensitive LAPS (ISLAPS) can be obtained. Conventional ISEs which contains liquid contacts have some limitations such as requiring maintenance, proper handling, leakage of inner filling solution and primary ion diffusion, which will deteriorate limit of detection. In this work, a multiplex ISLAPS detection system has been proposed combined with Na+, K+, and Ca2+ all-solid-state ISM and a conventional pH-LAPS. The matrix of the plasticizer free ISM is the silicone-rubber, which has not only the same sensitivity of PVC-based ISM, but also better adhesion and longer lifetime. With the help of a program-controlled two-axis translation stage, the detection sites of the sensor were sequentially illuminated by modulated light from the backside. Different from the conventional multi-channel potential sensors, LAPS system essentially uses a single-channel instrument to realize multi-parameter detection, and can be expanded easily by adding other ISMs only. The multiplex ISLAPS can meet the ion detection requirements, and it is a promising physiology detection platform. Method Figure 1a shows the structure of LAPS chip, the fabrication is similar to the previous report [2], except the thinned illumination area in the center of backside. The sensing material on the oxide layer is 30 nm Al2O3 layer deposited by atomic layer deposition (ALD) [3] for pH detection, and silicone-rubber ISMs for Na+, K+, and Ca2+ detection. The chip was cut into 1 cm×1 cm with a 4 mm×4 mm thinned area, in turn washed by acetone, ethanol and deionized water to store and use. Preparation of the ISM is as follows: Firstly, about 300mg silicone-rubber (RTV 730) was evenly dissolved in 1.5mL THF and centrifuged. Then the supernatant was mixed evenly with the ionophores and ion additives in 30min ultrasonic bath. Before deposition of ISM, a P3OT layer was applied on the surface of SiO2-LAPS chip. After that the ISM mixture was spin-coated on the P3OT layer and dried overnight at room temperature. The three ISM-coated LAPS chips and a Al2O3-LAPS chip were placed in a PMMA chamber, pasted with conductive silver glue on one bonding pad of PCB, with four holes to expose the thinned area of each site. The edges of chips were encapsulated by epoxy adhesive. The schematic of the multiplex ISLAPS system is shown in Figure 1b. The modulated light with collimator was fixed on the translation stage, illuminating the thinned area of sensor. The data acquisition (DAQ) device performed bias voltage output, signal acquisition, and was controlled by LabVIEW software together with the translation stage. The ISMs are sequentially illuminated and the response of four ions can be obtained in one measurement. Results and Conclusions Sensitivities of the multiplex ISLAPS were calibrated with series of concentration gradient solutions. The background electrolyte for Na+, K+ and Ca2+ is 0.1M CH3COOLi, and PBS solutions adjusted with HCl/NaCl were used in pH sensitivity determination. The ISMs were conditioned in the solutions of 10-2 M corresponding ions for 1h. The I-V curves and the bias-concentration fit lines are shown in Figure 1c. The sensitivity was obtained from the maximum slope points of I-V curves. The limits of detection (LODs) of the Na+, K+ and Ca2+ were about 10-6M, and the sensitivities were 57.37mV/pH, 56.9mV/pNa, 58.4mV/pK, and 25.3mV/pCa respectively, close to the Nernst theoretical value. The LOD and linear ranges can meet the requirements of physiological ions detection. The real DMEM samples were tested with standard addition method. The light spot moved with the stage and stayed at the center of each site for 10s. The responses of standard and spiked samples are shown in Figure 1d and results are listed in Table 1, indicating that the multiplex ISLAPS can be applied in physiological ions detection. Table 1 The results of DMEM samples detection Spiked Sample 1 Spiked Sample2 Standard pCa True 2.301 1.699 2.744 Measurement 2.373 1.587 2.772 Relative Error 3.12% -6.59% 1.02% pNa True 0.699 0.398 0.809 Measurement 0.714 0.383 0.800 Relative Error 2.14% -3.80% -1.04% pK True 2 1.301 2.273 Measurement 2.070 1.217 2.345 Relative Error 3.50% -6.44% 3.168% pH True 7.861 7.696 7.913 Measurement 7.797 7.472 7.613 Relative Error -0.81% -2.91% -3.79% In summary, we have firstly combined silicone-rubber ISM with LAPS and proposed a multiplex ISLAPS system for Na+, K+, Ca2+ and H+ with good performance. The ISM-coated chips are packaged in one detection channel, and the response of multiple ions can be recorded sequentially. It seems to be a promising physiology detection platform. References [1] Hafeman D G, Parce J W, McConnell H M. Light-addressable potentiometric sensor for biochemical systems[J]. Science, 1988, 240(4856): 1182-1185. [2] Liang T, Gu C, Gan Y, et al. Microfluidic chip system integrated with light addressable potentiometric sensor (LAPS) for real-time extracellular acidification detection[J]. Sensors and Actuators B: Chemical, 2019, 301: 127004. [3] Ismail A B M, Harada T, Yoshinobu T, et al. Investigation of pulsed laser-deposited Al2O3 as a high pH-sensitive layer for LAPS-based biosensing applications[J]. Sensors and Actuators B: Chemical, 2000, 71(3): 169-172. Figure 1


  • Elucidation of Zero‐Dimensional to Two‐Dimensional Growth Transition in MoS2 Chemical Vapor Deposition Synthesis

    by Tao Liang, Shuang Xie, Zhuoting Huang, Weifei Fu, Yu Cai, Xi Yang, Hongzheng Chen, Xiangyang Ma, Hideo Iwai, Daisuke Fujita, et al.