Ahmed Abouelsayed
Research Subjects
Ahmed Abouelsayed has a total of 84 co-authors. Here are the top co-authors by number of shared publications:
- Badawi Anis
Spectroscopy Department, Physics Division, National Research Centre, 33 El Bohouth st. (former El Tahrir st.), P.O. 12622 Dokki, Giza, Egypt
7 shared publications S.A. Hassan
5 shared publicationsC. A. Kuntscher
4 shared publicationsF. Hennrich
Center of Nanotechnology 2 , KIT, D-76021 Karlsruhe, Germany
4 shared publications- Wael Hosam Eisa
Spectroscopy Department, Physics Research Institute, National Research Centre (NRC), Dokki, Egypt
4 shared publications - Walid El Hotaby
Spectroscopy Department, Physics Research Institute, National Research Centre, Giza, Egypt
4 shared publications
Latest Publications
- Open Access
- 8 October 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (45) , 37926-37936
EMA-based fitting of optical transitions in CoPc: insights into carrier dynamics
Optical measurements have been performed in a wide frequency range between 400 cm−1 and 52 000 cm−1 on partially oxidized cobalt phthalocyanine (CoPc). The mid-IR band for the electric field E parallel to the stacking axis, centered at about 4008 for [CoPc]+ ions, respectively, has been discussed in terms of resonance absorption based on the effective medium approximation (EMA) model. The band in the reflectivity and conductivity spectra has been fitted using the normal Lorentz function and the general form of the Maxwell–Garnett equation. Various fitting features, which are explored for free electron metals, are obtained by inserting one Drude term in the Maxwell–Garnett equation, such as the plasma frequency and the time scattering rate. Based on the parameters extracted from fitting the mid-IR band according to the EMA model, we were able to obtain the effective conductivity σeff (ω) as a function of frequency.
- 8 October 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (45) , 37926-37936
Open AccessEMA-based fitting of optical transitions in CoPc: insights into carrier dynamics
Optical measurements have been performed in a wide frequency range between 400 cm−1 and 52 000 cm−1 on partially oxidized cobalt phthalocyanine (CoPc). The mid-IR band for the electric field E parallel to the stacking axis, centered at about 4008 for [CoPc]+ ions, respectively, has been discussed in terms of resonance absorption based on the effective medium approximation (EMA) model. The band in the reflectivity and conductivity spectra has been fitted using the normal Lorentz function and the general form of the Maxwell–Garnett equation. Various fitting features, which are explored for free electron metals, are obtained by inserting one Drude term in the Maxwell–Garnett equation, such as the plasma frequency and the time scattering rate. Based on the parameters extracted from fitting the mid-IR band according to the EMA model, we were able to obtain the effective conductivity σeff (ω) as a function of frequency.
- 13 September 2023
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1295
FTIR spectroscopic investigations of protein conformation provide clues of radioadaptation in the kidney of low-dose irradiated rats
- 13 September 2023
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1295
FTIR spectroscopic investigations of protein conformation provide clues of radioadaptation in the kidney of low-dose irradiated rats
- 16 August 2022
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 132 (7) , 075102
Effect of UV light illumination in humid air on the optical and electronic properties of the orthorhombic α-MoO3 and monoclinic β-MoO3
We present reflectivity measurements on monoclinic , orthorhombic - , and monoclinic - in a wide frequency range of 190–2500 nm. The extracted optical conductivity [ ] showed that has a metallic character while - and - have an insulating behavior. In addition, the photochromic properties of both - and - have been studied. The spectra for both samples showed a different spectral weight of the optical transition due to the formation of color center bands, which formed as a result of UV exposure. The spectral weight of optical transition from the bulk sixfold cations to cations is higher in case of the illuminated - sample than the illuminated - sample. The XRD results showed that both - and - were transformed to monoclinic molybdenum oxide dihydrate ( ) after exposure to UV irradiation in humid air. The spectra revealed that photoinjection of hydrogen into the - film is higher than in the case of the - film. In addition, the time domain fluorescence lifetime imaging microscopy data showed that the lifetime due to the optical transition from surface fourfold cations to cations in the case of illuminated - is higher than that for the illuminated - for the same optical transition. Meaning that, in the case of illuminated - , the surface cations disperse and penetrate into the bulk, lowering the spectral weight of the [ ] dimers and enhancing the spectral weight of the bulk centers.- 16 August 2022
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 132 (7) , 075102
Effect of UV light illumination in humid air on the optical and electronic properties of the orthorhombic α-MoO3 and monoclinic β-MoO3
We present reflectivity measurements on monoclinic , orthorhombic - , and monoclinic - in a wide frequency range of 190–2500 nm. The extracted optical conductivity [ ] showed that has a metallic character while - and - have an insulating behavior. In addition, the photochromic properties of both - and - have been studied. The spectra for both samples showed a different spectral weight of the optical transition due to the formation of color center bands, which formed as a result of UV exposure. The spectral weight of optical transition from the bulk sixfold cations to cations is higher in case of the illuminated - sample than the illuminated - sample. The XRD results showed that both - and - were transformed to monoclinic molybdenum oxide dihydrate ( ) after exposure to UV irradiation in humid air. The spectra revealed that photoinjection of hydrogen into the - film is higher than in the case of the - film. In addition, the time domain fluorescence lifetime imaging microscopy data showed that the lifetime due to the optical transition from surface fourfold cations to cations in the case of illuminated - is higher than that for the illuminated - for the same optical transition. Meaning that, in the case of illuminated - , the surface cations disperse and penetrate into the bulk, lowering the spectral weight of the [ ] dimers and enhancing the spectral weight of the bulk centers.- 28 July 2020
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 124 (33) , 18243-18256
Terahertz, Infrared, and UV–Vis Spectroscopy Study on Silver@Polyaniline Core@Shell Nanocomposites: Optical and Electronic Properties
We present transmission measurements on [email protected] ([email protected]) [email protected] nanocomposites over wide frequency range from terahertz to ultraviolet (0.001-6.2 eV). The [email protected] [email protected] nanocomposites were prepared using solid state reaction by mixing aniline sulfate (ANS) with 2.5, 5, 7.5, 10 wt% AgNO3. The nanocomposites were characterized by transmission electron microscope (TEM), ultraviolet/visible (UV/Vis), fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The optical conductivity σ(!) were fitted using localization modified Drude model (LMD) together with Lorentzian function. The incremental loading of AgNO3 lead to an increase in the Drude conductivity (σLMD) and decrease of scattering rate (γD) due to the increase of electrons delocalization of protonated quinoid imine units. In addition, the density of states NEF at the Fermi level are increased from 1.7 to 2.7 per eV per formula unit, while the conduction band width W is decreased from 0.7 to 0.4 eV with increasing the AgNO3 from 2.5 to 10 %. The optically determined band parameters suggest that the addition of AgNO3 modifies the energy state of the [email protected] [email protected] nanocomposites close to the Fermi energy modifying the half-filled polaron band.
- 28 July 2020
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 124 (33) , 18243-18256
Terahertz, Infrared, and UV–Vis Spectroscopy Study on Silver@Polyaniline Core@Shell Nanocomposites: Optical and Electronic Properties
We present transmission measurements on [email protected] ([email protected]) [email protected] nanocomposites over wide frequency range from terahertz to ultraviolet (0.001-6.2 eV). The [email protected] [email protected] nanocomposites were prepared using solid state reaction by mixing aniline sulfate (ANS) with 2.5, 5, 7.5, 10 wt% AgNO3. The nanocomposites were characterized by transmission electron microscope (TEM), ultraviolet/visible (UV/Vis), fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The optical conductivity σ(!) were fitted using localization modified Drude model (LMD) together with Lorentzian function. The incremental loading of AgNO3 lead to an increase in the Drude conductivity (σLMD) and decrease of scattering rate (γD) due to the increase of electrons delocalization of protonated quinoid imine units. In addition, the density of states NEF at the Fermi level are increased from 1.7 to 2.7 per eV per formula unit, while the conduction band width W is decreased from 0.7 to 0.4 eV with increasing the AgNO3 from 2.5 to 10 %. The optically determined band parameters suggest that the addition of AgNO3 modifies the energy state of the [email protected] [email protected] nanocomposites close to the Fermi energy modifying the half-filled polaron band.
- 3 December 2019
- Published by Egyptian Knowledge Bank in Egyptian Journal of Chemistry
- Vol. 63 (6) , 2331-2344
Enhancement of Photocatalytic Activity for Nanostructured ZnO Thin Film Prepared by Pulsed Spray Pyrolysis
Simple pulsed spray pyrsolysis (PSP) technique is used to prepare pure nanostructured zinc oxide (ZnO) thin films at different deposition temperatures and spraying times on glass substrates. XRD measurements show polycrystalline ZnO hexagonal wurtzite phase preferably oriented perpendicular through c- axis along (002) plane. SEM images demonstrate the formation of highly ordered hexagonal nanorods with a crystallite sizes ranged from 40 to 500 nm depending on the film thickness. Optical measurements show transmittance of nearly 90% at low thicknesses (189.1µm) and about 60% for higher thickness (233.8 µm) with a calculated energy band gap values spanning from 2.85 to 3.20 eV. Photocatalytic activity is performed on selected ZnO samples have highly oriented nanorods with large hexagonal cross-section area. Photocatalytic activity takes place on etched and as prepared ZnO film samples by monitoring photodegradation process of methylene blue MB using double beam spectrophotometer. Etched samples show higher photo activity than non- etched ones.
- 3 December 2019
- Published by Egyptian Knowledge Bank in Egyptian Journal of Chemistry
- Vol. 63 (6) , 2331-2344
Enhancement of Photocatalytic Activity for Nanostructured ZnO Thin Film Prepared by Pulsed Spray Pyrolysis
Simple pulsed spray pyrsolysis (PSP) technique is used to prepare pure nanostructured zinc oxide (ZnO) thin films at different deposition temperatures and spraying times on glass substrates. XRD measurements show polycrystalline ZnO hexagonal wurtzite phase preferably oriented perpendicular through c- axis along (002) plane. SEM images demonstrate the formation of highly ordered hexagonal nanorods with a crystallite sizes ranged from 40 to 500 nm depending on the film thickness. Optical measurements show transmittance of nearly 90% at low thicknesses (189.1µm) and about 60% for higher thickness (233.8 µm) with a calculated energy band gap values spanning from 2.85 to 3.20 eV. Photocatalytic activity is performed on selected ZnO samples have highly oriented nanorods with large hexagonal cross-section area. Photocatalytic activity takes place on etched and as prepared ZnO film samples by monitoring photodegradation process of methylene blue MB using double beam spectrophotometer. Etched samples show higher photo activity than non- etched ones.
- 19 September 2019
- Published by Springer Nature in Plasma Chemistry and Plasma Processing
- Vol. 40 (1) , 387-406
Electrical and Optical Characterization of Acetylene RF CCP for Synthesis of Different Forms of Hydrogenated Amorphous Carbon Films
- 19 September 2019
- Published by Springer Nature in Plasma Chemistry and Plasma Processing
- Vol. 40 (1) , 387-406
Electrical and Optical Characterization of Acetylene RF CCP for Synthesis of Different Forms of Hydrogenated Amorphous Carbon Films