LWLiping Wang

Liping Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Liping Wang has a total of 50 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • CFRP-reinforced screw connections for enhancing seismic performance of CFS shear walls

    by Liping Wang, Keyu Chen, Liqiang Jiang, Xinyuan Cheng, Shizhong Zhou, Xingshuo Zhang


  • An elastoplastic stochastic damage constitutive model for concrete under multidimensional loading

    by Yachuang Kuang, Kui Wang, Yadong Guo, Liping Wang, Fuzheng Ding, Weikang Li, Fan Fan

    This paper presents a novel multidimensional, elastoplastic, stochastic damage constitutive model for concrete developed through the phenomenological approach, with the aim of providing a more objective description of the mechanical behavior of concrete under multidimensional stress states. First, an isotropic hardening model of concrete was established within the effective stress space based on Ottosen's criterion. This approach ensures that the yield surface remains smooth and continuous, thus preventing potential nonconvergence issues in numerical calculations that may arise due to strain softening. Subsequently, a novel methodology was established, grounded on the non-associative flow criterion of plastic mechanics, to address the issue of plastic deformation in the elastoplastic stochastic damage constitutive model. Finally, the multidimensional, elastoplastic, stochastic damage constitutive model of concrete was imported into COMSOL Multiphysics for a numerical analysis of reinforced concrete (RC) beams without web reinforcement. The obtained results were analyzed and compared with the simulation results derived from ABAQUS in terms of the plastic deformation, damage evolution, and force–displacement curves. The findings indicated that the proposed multidimensional, elastoplastic, stochastic damage constitutive model for concrete could more accurately capture the progression of plastic deformation and comprehensively represent the evolution process of concrete damage under loading conditions when compared with ABAQUS simulations. The force–displacement curve derived from this model exhibited a closer agreement with the experimental data, with the discrepancies between the calculated and tested values of the concentrated loads across various deflections remaining within 10%. The proposed constitutive model effectively encapsulates the nonlinear and stochastic characteristics inherent in concrete.

  • Open Access

    Lateral Resistance of Modular CFS Shear Wall Connected with Rectangular Steel Tubes and Its Contribution to Frame Structures

    by Yanbo Kang, Jiyuan Mei, Xinyu Wu, Liping Wang

    Modular lightweight shear walls can not only facilitate easy installation, thereby improving construction efficiency, but also demonstrate potential to enhance the lateral stiffness when applied in frame structures. The aim of this paper is to investigate the effectiveness of a novel modular cold-formed steel (CFS) shear wall connected with rectangular steel tubes on improving the lateral performance of existing frame structures. Based on the test results of the lateral resistance of four full-scale specimens of modular CFS shear walls connected with rectangular steel tubes, the fine model and simplified model of test specimens were respectively established by the SAP2000v26.0.0 software. The performance indices of the yield load, yield displacement, peak load, peak displacement, and ductility factor were compared, and the maximum error of performance indices was satisfactory. The numerical results show that both the fine and simplified models can well simulate the deformation of walls under lateral cyclic loading, while the simplified models substantially simplify the calculation, which is more adaptable to the subsequent analysis of the multi-story building structure. Then, seismic response analyses of a frame with infilled modular walls and another frame without infilled modular walls were performed. The results indicate that, under the same seismic condition, the lateral displacements of the top floor of the six-story frame with infilled modular walls were reduced by 11–71%, and the maximum inter-story displacement angles were reduced by 15–67% compared to the frame without infilled walls. Therefore, it is demonstrated that the infilled modular CFS shear walls can significantly improve the lateral stiffness and the seismic performance of the steel frame structures.


  • Prediction formulas of buckling and critical temperatures of restrained box-section steel columns in fire

    by Binhui Jiang, Fuxiong Peng, Zhengrong Chen, Liping Wang

    As important parameters reflecting the fire resistance of restrained steel columns, buckling and critical temperatures have been extensively studied. However, the existing simplified design methods for buckling or critical temperature are based on column models with either pin-ended or with large rotational restraints, their applications on steel columns with limited rotational restraint stiffness ratios, i.e., rotational restraint stiffness ratios smaller than the critical rotational restraint stiffness ratio, is questionable. In this paper, parametric analyses were performed on a validated numerical column model with rotational restraint stiffness ratio spanning from 0.0001 to 10.0. Additionally, the influences of slenderness ratio, load ratio, and axial restraint stiffness ratio were also considered. Results reveal significant errors when using the existing simplified design methods to predict the buckling and critical temperatures of steel columns with limited rotational restraint stiffness ratios. Based on the parametric analyses results, new prediction formulas for buckling and critical temperatures of box-section steel columns were proposed. Results of the proposed formulas are in close alignment with those of the parametric analyses across the full range of considered parameters. Moreover, the effectiveness of the proposed formulas was further validated by test results in literatures.

  • Open Access

    Seismic Performance of Recycled Aggregate Concrete-Filled Steel Tube Column–Composite Beam Frames with Column-End Stirrup Confinement

    by Zhi Yang, Xingnian Chen, Hongchang Xu, Baoye Hui, Jia Huang, Liping Wang, Said Ikram Sadat, Faxing Ding

    The application of recycled concrete in building structures can not only effectively reduce the generation of construction waste and reduce the excessive dependence on natural aggregates but can also promote the sustainable use of resources and meet the national “double carbon” strategic requirements. This study investigates the effect of the recycled aggregate replacement ratio on the seismic performance of concrete-filled steel tube column–composite beam frames. Five finite element models were developed, considering varying recycled aggregate replacement ratios and the presence or absence of column-end stirrup-confined reinforcement. Dynamic response analyses were conducted. The results reveal that replacing natural aggregates with recycled aggregates reduces the stiffness of concrete-filled steel tube columns by weakening the core concrete, negatively impacting seismic performance and increasing structural stiffness damage. Column-end stirrup-confined reinforcement reduces interface slip between the core concrete and the steel tube by directly restraining the core concrete, thereby enhancing the bending stiffness of the concrete-filled steel tube column and improving the seismic performance of the structure. The seismic performance of recycled concrete frames with column-end stirrup-confined reinforcement is superior to that of conventional concrete frames, demonstrating that column-end reinforcement can effectively mitigate the adverse effects of recycled aggregate replacement on the structure’s seismic performance.


  • Experimental and numerical study on the shear behavior of web perforated cold-formed steel beams

    by Liping Wang, Jian Li, Cuiying Luo, Xingxing Cao, Haibo Wang


  • Open Access

    Numerical Investigation of Composite Behavior and Strength of Rectangular Concrete-Filled Cold-Formed Steel Tubular Stub Columns

    by Liping Wang, Yanan An, Faxing Ding, Yachuan Kuang, Qing Ma, Sui Tan, Weizhen Zhang, Pengzhou Zhao, Enhui Ren

    The objective of this study was to investigate the composite behavior of rectangular concrete-filled cold-formed steel (CFS) tubular stub columns under axial compression. A fine finite 3D solid element model of rectangular concrete-filled cold-formed steel tubular stub column was established by ABAQUS, which utilized a constitutive model of cold-formed steel considering the cold-forming effect and a triaxial plastic-damage constitutive model of the infilled concrete. Good agreement was achieved and the average discrepancy between the experimental and FE results was less than 5%. Based on the verified models, a further parametric analysis was carried out to reveal the influence of various factors on the strength and behavior of the concrete-filled rectangular cold-formed steel tubular stub columns. The factors included constitutive models adopted for cold-formed steel, length over width ratio of the rectangular section, wall-thickness and width, and concrete strength and yield strength of the cold-formed steel. A total of 144 FE models were analyzed. The stress nephogram was reasonably simplified in accordance with the limit state and a theoretical formula considering confinement coefficient was proposed to estimate the ultimate bearing capacity of concrete-filled rectangular cold-formed steel tubular stub columns using the superposition method. The calculated results showed satisfactory agreement with both the experimental and FE results, which proved the validity and accuracy of the formula proposed in this paper. In the proposed formula, the confinement coefficient of square concrete-filled cold-formed steel tubular stub columns is larger than that of hot-rolled steel counterparts but smaller than that of the stainless steel counterparts.