Sallehuddin Ibrahim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sallehuddin Ibrahim has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
Mohd Amri Md Yunus
Univ Teknol Malaysia, Fac Engn, Sch Elect Engn, Skudai 81310, Johor, Malaysia
7 shared publicationsMahdi Faramarzi
Univ Teknol Malaysia, Fac Engn, Sch Elect Engn, Skudai 81310, Johor, Malaysia
6 shared publications- Mohd Amri Md Yunus
Universiti Teknologi Malaysia
4 shared publications Mohd Taufiq Mohd Khairi
Universiti Teknologi Malaysia
4 shared publications- Mohd Taufiq Mohd Khairi
Univ Teknol Malaysia, Fac Engn, Sch Elect Engn, Skudai 81310, Johor, Malaysia
4 shared publications - Mahdi Faramarzi
Universiti Teknologi Malaysia
2 shared publications
Latest Publications
- Open Access
- 12 June 2024
- Published by Global Academic Excellence (M) Sdn Bhd in International Journal of Innovation and Industrial Revolution
- Vol. 6 (17) , 22-30
IMAGING OF BUBBLY FLOW USING ULTRASOUND
Flow measurement is a vital issue in instrumentation and has been applied in the various industries. The characteristics of a single phase regime has been extensively researched. On the other hand obtaining the characteristics of a multi-component flow is more complex and traditional equipment do not provide reliable results. As such, tomography utilizing non-invasive transducers is getting attention in the industries because it does not invade the flow. Ultrasonic tomography is among the methods which is suitable for flow containing bubbles. In this project, 16 ultrasonic transducers are placed around a flow pipe. Five different phantoms representing solid flow are placed in the pipe. The flow is imaged using the linear back projection algorithm. The results show that the system was able to image the phantoms which are placed at different locations.
- 12 June 2024
- Published by Global Academic Excellence (M) Sdn Bhd in International Journal of Innovation and Industrial Revolution
- Vol. 6 (17) , 22-30
Open AccessIMAGING OF BUBBLY FLOW USING ULTRASOUND
Flow measurement is a vital issue in instrumentation and has been applied in the various industries. The characteristics of a single phase regime has been extensively researched. On the other hand obtaining the characteristics of a multi-component flow is more complex and traditional equipment do not provide reliable results. As such, tomography utilizing non-invasive transducers is getting attention in the industries because it does not invade the flow. Ultrasonic tomography is among the methods which is suitable for flow containing bubbles. In this project, 16 ultrasonic transducers are placed around a flow pipe. Five different phantoms representing solid flow are placed in the pipe. The flow is imaged using the linear back projection algorithm. The results show that the system was able to image the phantoms which are placed at different locations.
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3114 (1)
Imaging of gas bubbles using ultrasound
Gas bubbles imaging is vital in various industries. A system using ultrasound based on the tomography concept can be used to visualize the characteristics of bu Gas bubbles imaging is vital in various industries. A system using ultrasound based on the tomography concept can be used to visualize the characteristics of bu
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3114 (1)
Imaging of gas bubbles using ultrasound
Gas bubbles imaging is vital in various industries. A system using ultrasound based on the tomography concept can be used to visualize the characteristics of bu Gas bubbles imaging is vital in various industries. A system using ultrasound based on the tomography concept can be used to visualize the characteristics of bu
- Open Access
- 1 April 2023
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 13 (2) , 2030-2039
An assessment of stingless beehive climate impact using multivariate recurrent neural networks
A healthy bee colony depends on various elements, including a stable habitat, a sufficient source of food, and favorable weather. This paper aims to assess the stingless beehive climate data and examine the precise short-term forecast model for hive weight output. The dataset was extracted from a single hive, for approximately 36-hours, at every seven seconds time stamp. The result represents the correlation analysis between all variables. The evaluation of root-mean-square error (RMSE), as well as the RMSE performance from various types of topologies, are tested on four different forecasting window sizes. The proposed forecast model considers seven of input vectors such as hive weight, an inside temperature, inside humidity, outside temperature, outside humidity, the dewpoint, and bee count. The various network architecture examined for minimal RMSE are long short-term memory (LSTM) and gated recurrent units (GRU). The LSTM1X50 topology was found to be the best fit while analyzing several forecasting windows sizes for the beehive weight forecast. The results obtained indicate a significant unusual symptom occurring in the stingless bee colonies, which allow beekeepers to make decisions with the main objective of improving the colony’s health and propagation.
- 1 April 2023
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 13 (2) , 2030-2039
Open AccessAn assessment of stingless beehive climate impact using multivariate recurrent neural networks
A healthy bee colony depends on various elements, including a stable habitat, a sufficient source of food, and favorable weather. This paper aims to assess the stingless beehive climate data and examine the precise short-term forecast model for hive weight output. The dataset was extracted from a single hive, for approximately 36-hours, at every seven seconds time stamp. The result represents the correlation analysis between all variables. The evaluation of root-mean-square error (RMSE), as well as the RMSE performance from various types of topologies, are tested on four different forecasting window sizes. The proposed forecast model considers seven of input vectors such as hive weight, an inside temperature, inside humidity, outside temperature, outside humidity, the dewpoint, and bee count. The various network architecture examined for minimal RMSE are long short-term memory (LSTM) and gated recurrent units (GRU). The LSTM1X50 topology was found to be the best fit while analyzing several forecasting windows sizes for the beehive weight forecast. The results obtained indicate a significant unusual symptom occurring in the stingless bee colonies, which allow beekeepers to make decisions with the main objective of improving the colony’s health and propagation.
- Open Access
- 17 October 2022
- Published by Elsevier in Measurement: Food
- Vol. 8
Erratum to “Two-dimensional and pseudo three-dimensional visualisation of foreign objects in milk carton using ultrasonic tomography” [Measurement: Food Volume 6, June 2022, 100027]
- 17 October 2022
- Published by Elsevier in Measurement: Food
- Vol. 8
Open AccessErratum to “Two-dimensional and pseudo three-dimensional visualisation of foreign objects in milk carton using ultrasonic tomography” [Measurement: Food Volume 6, June 2022, 100027]
- Open Access
- 1 September 2019
- Published by Institute of Advanced Engineering and Science in Indonesian Journal of Electrical Engineering and Computer Science
- Vol. 15 (3) , 1241-1249
Detection of foreign objects in milk using an ultrasonic system
This paper presents the utilization of an ultrasonic sensing system to detect foreign objects in milk. The advantage of an ultrasonic system is that it is low cost and it can detect a wide range of materials. A foreign body is any contaminated object found in food. Because of the scale of multifarious food processing levels and distribution, the utilization of the food product are sometimes difficult to control, which will inevitably lead to some complaints by consumers. Milk is widely consumed in the world as it is considered as a healthy drink due to it is high nutrients levels. However, from time to time cases of milk contamination are reported. In this paper. the relationship between the foreign bodies in terms of their dimensions and the resultant amplitude are presented. Mathematical modelling were carried out based on two ultrasonic parameters i.e. acoustic impedance and wave amplitude utilizing several types of foreign bodies with different dimensions. Three types of foreign bodies which are steel, rubber and air were investigated to determine the voltage amplitude detected by the ultrasonic receiver when the foreign bodies obstructed the ultrasonic wave propagation path. The diameters of foreign bodies were in the range from 4 mm to 11 mm. The results showed good correlations between the receiver voltage and the size of foreign bodies with correlation coefficients greater than 0.95. Each foreign body also demonstrated different voltage amplitudes when several sizes of the foreign bodies were tested which showed the ability of the system to distinguish the size of each foreign body.
- 1 September 2019
- Published by Institute of Advanced Engineering and Science in Indonesian Journal of Electrical Engineering and Computer Science
- Vol. 15 (3) , 1241-1249
Open AccessDetection of foreign objects in milk using an ultrasonic system
This paper presents the utilization of an ultrasonic sensing system to detect foreign objects in milk. The advantage of an ultrasonic system is that it is low cost and it can detect a wide range of materials. A foreign body is any contaminated object found in food. Because of the scale of multifarious food processing levels and distribution, the utilization of the food product are sometimes difficult to control, which will inevitably lead to some complaints by consumers. Milk is widely consumed in the world as it is considered as a healthy drink due to it is high nutrients levels. However, from time to time cases of milk contamination are reported. In this paper. the relationship between the foreign bodies in terms of their dimensions and the resultant amplitude are presented. Mathematical modelling were carried out based on two ultrasonic parameters i.e. acoustic impedance and wave amplitude utilizing several types of foreign bodies with different dimensions. Three types of foreign bodies which are steel, rubber and air were investigated to determine the voltage amplitude detected by the ultrasonic receiver when the foreign bodies obstructed the ultrasonic wave propagation path. The diameters of foreign bodies were in the range from 4 mm to 11 mm. The results showed good correlations between the receiver voltage and the size of foreign bodies with correlation coefficients greater than 0.95. Each foreign body also demonstrated different voltage amplitudes when several sizes of the foreign bodies were tested which showed the ability of the system to distinguish the size of each foreign body.
- 9 July 2018
- Published by Wiley in Journal of Food Process Engineering
- Vol. 41 (6)
Noninvasive techniques for detection of foreign bodies in food: A review
Foreign body in food is a matter of concern in food industry as it determines the safety and quality of the product. This issue leads to anxiety as it is hazardous if it is accidentally being consumed. Therefore, foreign body detection is urgently needed. Noninvasive techniques are attractive as they can be used to evaluate without altering the originality of the food products in terms of ingredient and structure. With the growing interest in this subject, this article reviews the development of noninvasive techniques including X‐ray, thermal imaging, near‐infrared spectroscopy, hyperspectral imaging, ultrasonic, and terahertz. The principle and application of each technique are elaborated. The performances and limitations from previous studies in several types of food applications are analyzed. In addition, future trends and challenges encountered with these techniques are highlighted. It is envisaged that the information gathered in this article will be a valuable source of information for researchers working in this topic.Practical applications: The existence of foreign bodies in food causes degradation of their quality and safety. The implementation of the noninvasive technique as a monitoring tool have received an encouraging response from the manufacturers which endeavors to maintain their credibility and reputation. This review serves to provide an up‐to‐date development on the noninvasive technique for detecting foreign bodies which is useful for academicians and researchers especially from the food processing industries.
- 9 July 2018
- Published by Wiley in Journal of Food Process Engineering
- Vol. 41 (6)
Noninvasive techniques for detection of foreign bodies in food: A review
Foreign body in food is a matter of concern in food industry as it determines the safety and quality of the product. This issue leads to anxiety as it is hazardous if it is accidentally being consumed. Therefore, foreign body detection is urgently needed. Noninvasive techniques are attractive as they can be used to evaluate without altering the originality of the food products in terms of ingredient and structure. With the growing interest in this subject, this article reviews the development of noninvasive techniques including X‐ray, thermal imaging, near‐infrared spectroscopy, hyperspectral imaging, ultrasonic, and terahertz. The principle and application of each technique are elaborated. The performances and limitations from previous studies in several types of food applications are analyzed. In addition, future trends and challenges encountered with these techniques are highlighted. It is envisaged that the information gathered in this article will be a valuable source of information for researchers working in this topic.Practical applications: The existence of foreign bodies in food causes degradation of their quality and safety. The implementation of the noninvasive technique as a monitoring tool have received an encouraging response from the manufacturers which endeavors to maintain their credibility and reputation. This review serves to provide an up‐to‐date development on the noninvasive technique for detecting foreign bodies which is useful for academicians and researchers especially from the food processing industries.
- 31 May 2018
- Published by Wiley in International Journal of Dairy Technology
- Vol. 71 (4) , 1005-1011
Ultrasonic tomography for detecting foreign objects in refrigerated milk cartons
This study presents an investigation of the detection of foreign objects in milk cartons using an ultrasonic tomography measurement system. Ultrasonic parameters such as acoustic impedance and wave amplitude were modelled and investigated using foreign materials of different densities such as metal, glass, wood and plastic. Linear back‐projection (LBP) and convolution back‐projection (CBP) algorithms with Hanning, Hamming and Ram‐Lak filters were implemented to reconstruct two‐dimensional cross‐sectional images of the milk and the foreign objects. The image quality assessment was conducted using the peak signal‐to‐noise ratio (PSNR) and structural similarity index (SSIM). The results revealed that the CBP‐Ram‐Lak filters managed to obtain the clearest and the sharpest reconstructed images as they achieved the best values of PSNR and SSIM (15.4537 and 0.8683, respectively) for a single glass material. It is envisaged that the ultrasonic tomography method can be very useful for monitoring the quality and safety of milk products, especially for detecting physical contaminants.
- 31 May 2018
- Published by Wiley in International Journal of Dairy Technology
- Vol. 71 (4) , 1005-1011
Ultrasonic tomography for detecting foreign objects in refrigerated milk cartons
This study presents an investigation of the detection of foreign objects in milk cartons using an ultrasonic tomography measurement system. Ultrasonic parameters such as acoustic impedance and wave amplitude were modelled and investigated using foreign materials of different densities such as metal, glass, wood and plastic. Linear back‐projection (LBP) and convolution back‐projection (CBP) algorithms with Hanning, Hamming and Ram‐Lak filters were implemented to reconstruct two‐dimensional cross‐sectional images of the milk and the foreign objects. The image quality assessment was conducted using the peak signal‐to‐noise ratio (PSNR) and structural similarity index (SSIM). The results revealed that the CBP‐Ram‐Lak filters managed to obtain the clearest and the sharpest reconstructed images as they achieved the best values of PSNR and SSIM (15.4537 and 0.8683, respectively) for a single glass material. It is envisaged that the ultrasonic tomography method can be very useful for monitoring the quality and safety of milk products, especially for detecting physical contaminants.
- 26 June 2017
- Published by Wiley in Journal of Food Process Engineering
- Vol. 41 (1)
Finite element simulation for detecting the foreign body based on ultrasonic sensor
This paper presents the design of an ultrasonic sensor for food quality and safety measurement which is modeled using two dimensions (2D) of finite element method (FEM). The measurement process was implemented by evaluating the presence of foreign body in a food container where the Comsol Multiphysics software was used to construct and conduct the design of modeling. This paper discussed briefly about the applied parameters in ultrasonic measurement which are acoustic impedance, attenuation coefficient, frequency and time of flight. Steel and glass are selected for foreign body's materials since these materials are occasionally present in foodstuffs during the manufacturing process. Some parameters such as frequency of ultrasonic sensor, the thickness of container wall and the size of foreign body were investigated and evaluated. The analysis process is based on the outcome of the total acoustic pressure and the time arrival of the receiving signal. The investigation only considered the ultrasonic transmission sensing mode. Two values of frequencies for ultrasonic sensor are being tested, that is, 45 kHz and 300 kHz. The results showed that the total acoustic pressure is reduced when the thickness of container wall and the size of foreign body are increased. For the 45 kHz frequency, the total acoustic pressures recorded were 1.210 Pa and 1.020 Pa for 0.5 mm and 0.9 mm of wall thickness, respectively. The data is obtained using 5 mm diameter of steel material containing as foreign body. The total acoustic pressure showed the same correlation for a frequency of 300 kHz where 0.658 Pa and 0.420 Pa were obtained for 0.5 mm and 0.9 mm of wall thickness respectively. The results revealed the same correlation for a glass material when it was used as a foreign body. The result shows that the finite elements method is very useful in designing an ultrasonic measurement system in food industry field especially in quality and safety food assessment.Practical applications: Food quality is an important aspect for the food manufacturer. It is degraded for example if there is a foreign body in the foods product. It can cause the consumers to lose confidence of the manufacturer. Hence, a suitable sensor should be used to monitor the quality of the products is maintained. Ultrasonic sensors have attracted the attention of the food industry because it is cheap, fast response, and reliable. This paper presents an investigation using the two dimensional finite element method using Comsol Multiphysics software in order to detect the foreign body in a food container using an ultrasonic measurement system. The study demonstrates that the finite element method can assist in the design and development of an ultrasonic measurement system in the food industry field especially in the aspect of food safety and quality assurance.
- 26 June 2017
- Published by Wiley in Journal of Food Process Engineering
- Vol. 41 (1)
Finite element simulation for detecting the foreign body based on ultrasonic sensor
This paper presents the design of an ultrasonic sensor for food quality and safety measurement which is modeled using two dimensions (2D) of finite element method (FEM). The measurement process was implemented by evaluating the presence of foreign body in a food container where the Comsol Multiphysics software was used to construct and conduct the design of modeling. This paper discussed briefly about the applied parameters in ultrasonic measurement which are acoustic impedance, attenuation coefficient, frequency and time of flight. Steel and glass are selected for foreign body's materials since these materials are occasionally present in foodstuffs during the manufacturing process. Some parameters such as frequency of ultrasonic sensor, the thickness of container wall and the size of foreign body were investigated and evaluated. The analysis process is based on the outcome of the total acoustic pressure and the time arrival of the receiving signal. The investigation only considered the ultrasonic transmission sensing mode. Two values of frequencies for ultrasonic sensor are being tested, that is, 45 kHz and 300 kHz. The results showed that the total acoustic pressure is reduced when the thickness of container wall and the size of foreign body are increased. For the 45 kHz frequency, the total acoustic pressures recorded were 1.210 Pa and 1.020 Pa for 0.5 mm and 0.9 mm of wall thickness, respectively. The data is obtained using 5 mm diameter of steel material containing as foreign body. The total acoustic pressure showed the same correlation for a frequency of 300 kHz where 0.658 Pa and 0.420 Pa were obtained for 0.5 mm and 0.9 mm of wall thickness respectively. The results revealed the same correlation for a glass material when it was used as a foreign body. The result shows that the finite elements method is very useful in designing an ultrasonic measurement system in food industry field especially in quality and safety food assessment.Practical applications: Food quality is an important aspect for the food manufacturer. It is degraded for example if there is a foreign body in the foods product. It can cause the consumers to lose confidence of the manufacturer. Hence, a suitable sensor should be used to monitor the quality of the products is maintained. Ultrasonic sensors have attracted the attention of the food industry because it is cheap, fast response, and reliable. This paper presents an investigation using the two dimensional finite element method using Comsol Multiphysics software in order to detect the foreign body in a food container using an ultrasonic measurement system. The study demonstrates that the finite element method can assist in the design and development of an ultrasonic measurement system in the food industry field especially in the aspect of food safety and quality assurance.
- Open Access
- 16 May 2016
- Published by Wiley in International Journal of Optics
- Vol. 2016, 1-19
Gas Bubbles Investigation in Contaminated Water Using Optical Tomography Based on Independent Component Analysis Method
This paper presents the results of concentration profiles for gas bubble flow in a vertical pipeline containing contaminated water using an optical tomography system. The concentration profiles for the bubble flow quantities are investigated under five different flows conditions, a single bubble, double bubbles, 25% of air opening, 50% of air opening, and 100% of air opening flow rates where a valve is used to control the gas flow in the vertical pipeline. The system is aided by the independent component analysis (ICA) algorithm to reconstruct the concentration profiles of the liquid-gas flow. The behaviour of the gas bubbles was investigated in contaminated water in which the water sample was prepared by adding 25 mL of colour ingredients to 3 liters of pure water. The result shows that the application of ICA has enabled the system to detect the presence of gas bubbles in contaminated water. This information provides vital information on the flow inside the pipe and hence could be very significant in increasing the efficiency of the process industries.
- 16 May 2016
- Published by Wiley in International Journal of Optics
- Vol. 2016, 1-19
Open AccessGas Bubbles Investigation in Contaminated Water Using Optical Tomography Based on Independent Component Analysis Method
This paper presents the results of concentration profiles for gas bubble flow in a vertical pipeline containing contaminated water using an optical tomography system. The concentration profiles for the bubble flow quantities are investigated under five different flows conditions, a single bubble, double bubbles, 25% of air opening, 50% of air opening, and 100% of air opening flow rates where a valve is used to control the gas flow in the vertical pipeline. The system is aided by the independent component analysis (ICA) algorithm to reconstruct the concentration profiles of the liquid-gas flow. The behaviour of the gas bubbles was investigated in contaminated water in which the water sample was prepared by adding 25 mL of colour ingredients to 3 liters of pure water. The result shows that the application of ICA has enabled the system to detect the presence of gas bubbles in contaminated water. This information provides vital information on the flow inside the pipe and hence could be very significant in increasing the efficiency of the process industries.
- 1 December 2015
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 27 (1) , 012001
Contact and non-contact ultrasonic measurement in the food industry: a review
The monitoring of the food manufacturing process is vital since it determines the safety and quality level of foods which directly affect the consumers’ health. Companies which produce high quality products will gain trust from consumers. This factor helps the companies to make profits. The use of efficient and appropriate sensors for the monitoring process can also reduce cost. The food assessing process based on an ultrasonic sensor has attracted the attention of the food industry due to its excellent capabilities in several applications. The utilization of low or high frequencies for the ultrasonic transducer has provided an enormous benefit for analysing, modifying and guaranteeing the quality of food. The contact and non-contact ultrasonic modes for measurement also contributed significantly to the food processing. This paper presents a review of the application of the contact and non-contact mode of ultrasonic measurement focusing on safety and quality control areas. The results from previous researches are shown and elaborated.
- 1 December 2015
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 27 (1) , 012001
Contact and non-contact ultrasonic measurement in the food industry: a review
The monitoring of the food manufacturing process is vital since it determines the safety and quality level of foods which directly affect the consumers’ health. Companies which produce high quality products will gain trust from consumers. This factor helps the companies to make profits. The use of efficient and appropriate sensors for the monitoring process can also reduce cost. The food assessing process based on an ultrasonic sensor has attracted the attention of the food industry due to its excellent capabilities in several applications. The utilization of low or high frequencies for the ultrasonic transducer has provided an enormous benefit for analysing, modifying and guaranteeing the quality of food. The contact and non-contact ultrasonic modes for measurement also contributed significantly to the food processing. This paper presents a review of the application of the contact and non-contact mode of ultrasonic measurement focusing on safety and quality control areas. The results from previous researches are shown and elaborated.