Guoqiang Ma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Guoqiang Ma has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
Jun Jin
CAS Key Laboratory of Materials for Energy Conversion, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, China
9 shared publicationsXiangwei Wu
CAS Key Laboratory of Materials for Energy Conversion, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, China
8 shared publications- Zhaoyin Wen
CAS Key Laboratory of Materials for Energy Conversion, Shanghai Institute of Ceramics, Chinese Academy of Sciences (SICCAS), Shanghai 200050, China
5 shared publications Meifen Wu
CAS Key Laboratory of Materials for Energy Conversion
4 shared publicationsQingsong Wang
CAS Key Laboratory of Materials for Energy Conversion, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, China
4 shared publicationsZhaoyin Wen
4 shared publications
Latest Publications
- 19 December 2022
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 634, 737-746
Tailored engineering of Fe3O4 and reduced graphene oxide coupled architecture to realize the full potential as electrode materials for lithium-ion batteries
- 19 December 2022
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 634, 737-746
Tailored engineering of Fe3O4 and reduced graphene oxide coupled architecture to realize the full potential as electrode materials for lithium-ion batteries
- 1 January 2022
- Published by Shanghai Institute of Ceramics in Journal of Inorganic Materials
- Vol. 37 (7) , 710-+
Effect of Dual-functional Electrolyte Additive on High Temperature and High Voltage Performance of Li-ion Battery
- 1 January 2022
- Published by Shanghai Institute of Ceramics in Journal of Inorganic Materials
- Vol. 37 (7) , 710-+
Effect of Dual-functional Electrolyte Additive on High Temperature and High Voltage Performance of Li-ion Battery
- 24 April 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (20) , 12498-12506
Akin solid–solid biphasic conversion of a Li–S battery achieved by coordinated carbonate electrolytes
Lithium–sulfur batteries are of significant interest because their theoretical energy density exceeds that of Li-ion batteries and they can be fabricated at much lower costs. Although significant efforts have been devoted towards improving sulfur electrodes, the battery requires a “flooded” electrolyte for the dissolution–precipitation chemistry to achieve acceptable energy efficiency (the electrolyte/sulfur ratio, E/S ratio, is typically much higher than 5 : 1 μl mg−1). Herein, we report a complex electrolyte of LiTFSI salt with widely used carbonate solvents (EC and DEC) other than ether (DOL and DME) for use in Li–S batteries based on S8 as the active material. By tuning the electrolyte coordination structure, we demonstrated that the sulfur speciation pathway was fundamentally altered from the conventional dissolution–precipitation category to an akin solid–solid biphasic conversion, leading to low E/S ratios and no shuttle effect. Furthermore, the reduced reactivity of the fully coordinated solvents mitigates Li dendritic formation and related electrolyte consumption. These combined merits allow us to demonstrate that a S8/Ketjenblack electrode can achieve a capacity close to theoretical capacity (1600 mA h g−1) and high coulombic efficiency (above 99%) with a stable cycling performance at an ultralow electrolyte/sulfur ratio (1.5 : 1 μl mg−1); hence, our study defines a new pathway towards the fabrication of highly robust Li–S batteries for high-density energy storage.
- 24 April 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (20) , 12498-12506
Akin solid–solid biphasic conversion of a Li–S battery achieved by coordinated carbonate electrolytes
Lithium–sulfur batteries are of significant interest because their theoretical energy density exceeds that of Li-ion batteries and they can be fabricated at much lower costs. Although significant efforts have been devoted towards improving sulfur electrodes, the battery requires a “flooded” electrolyte for the dissolution–precipitation chemistry to achieve acceptable energy efficiency (the electrolyte/sulfur ratio, E/S ratio, is typically much higher than 5 : 1 μl mg−1). Herein, we report a complex electrolyte of LiTFSI salt with widely used carbonate solvents (EC and DEC) other than ether (DOL and DME) for use in Li–S batteries based on S8 as the active material. By tuning the electrolyte coordination structure, we demonstrated that the sulfur speciation pathway was fundamentally altered from the conventional dissolution–precipitation category to an akin solid–solid biphasic conversion, leading to low E/S ratios and no shuttle effect. Furthermore, the reduced reactivity of the fully coordinated solvents mitigates Li dendritic formation and related electrolyte consumption. These combined merits allow us to demonstrate that a S8/Ketjenblack electrode can achieve a capacity close to theoretical capacity (1600 mA h g−1) and high coulombic efficiency (above 99%) with a stable cycling performance at an ultralow electrolyte/sulfur ratio (1.5 : 1 μl mg−1); hence, our study defines a new pathway towards the fabrication of highly robust Li–S batteries for high-density energy storage.
- 1 January 2018
- Published by Shanghai Institute of Ceramics in Journal of Inorganic Materials
- Vol. 33 (7) , 699-710
Research Process on Novel Electrolyte of Lithium-ion Battery Based on Lithium Salts
随着新能源汽车、可携带式电源和储能等领域的快速发展, 人们对锂电池性能提出了更高的要求, 高性能锂离子电池的重要性日益突出。电解质是锂离子电池的重要组成部分, 对于电池的输出电压、倍率性能、适用温度范围、循环性能和安全性能等有着重要的影响。而锂盐作为液体电解质(电解液)的关键组分, 是决定电解液性能的重要因素。电解液中不同种类的锂盐及其在溶液中不同的溶剂化状态, 会对电极/电解液界面的成膜性能和锂离子的迁移行为等产生重要影响, 进而显著影响电解液的电化学性能。本文介绍了近年来新型电解质锂盐的性质特点和在不同种类电池中的应用。同时, 单一的锂盐不能完全满足锂电池对电解液的要求, 因而人们尝试采用复合锂盐使功能更完善, 催生了多盐体系电解液。多盐体系电解液在拓宽电池工作温度、抑制金属离子溶出和提高倍率性能等方面表现出明显优势。同时, 借助于浓度的提升改变锂离子的溶剂化结构, 研究人员提出了高浓度电解液。高浓度电解液在防止石墨剥离、拓宽电解液电化学窗口、抑制铝箔腐蚀和提高金属锂沉积/溶出性能等方面具有明显优势。并且, 本文重点讨论了这两种电解液对电池性能提升的机理。最后, 对锂盐基电解液尤其是这两类新型电解液的发展趋势和应用前景进行了展望。
- 1 January 2018
- Published by Shanghai Institute of Ceramics in Journal of Inorganic Materials
- Vol. 33 (7) , 699-710
Research Process on Novel Electrolyte of Lithium-ion Battery Based on Lithium Salts
随着新能源汽车、可携带式电源和储能等领域的快速发展, 人们对锂电池性能提出了更高的要求, 高性能锂离子电池的重要性日益突出。电解质是锂离子电池的重要组成部分, 对于电池的输出电压、倍率性能、适用温度范围、循环性能和安全性能等有着重要的影响。而锂盐作为液体电解质(电解液)的关键组分, 是决定电解液性能的重要因素。电解液中不同种类的锂盐及其在溶液中不同的溶剂化状态, 会对电极/电解液界面的成膜性能和锂离子的迁移行为等产生重要影响, 进而显著影响电解液的电化学性能。本文介绍了近年来新型电解质锂盐的性质特点和在不同种类电池中的应用。同时, 单一的锂盐不能完全满足锂电池对电解液的要求, 因而人们尝试采用复合锂盐使功能更完善, 催生了多盐体系电解液。多盐体系电解液在拓宽电池工作温度、抑制金属离子溶出和提高倍率性能等方面表现出明显优势。同时, 借助于浓度的提升改变锂离子的溶剂化结构, 研究人员提出了高浓度电解液。高浓度电解液在防止石墨剥离、拓宽电解液电化学窗口、抑制铝箔腐蚀和提高金属锂沉积/溶出性能等方面具有明显优势。并且, 本文重点讨论了这两种电解液对电池性能提升的机理。最后, 对锂盐基电解液尤其是这两类新型电解液的发展趋势和应用前景进行了展望。
- 12 December 2017
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (4) , 1612-1620
Enhancing metallic lithium battery performance by tuning the electrolyte solution structure
A concentrated electrolyte shows a series of outstanding properties including improved lithium plating/stripping performance and suppressed shuttle effect for Li–S batteries owing to its special solvation sheath of Li + .
- 12 December 2017
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (4) , 1612-1620
Enhancing metallic lithium battery performance by tuning the electrolyte solution structure
A concentrated electrolyte shows a series of outstanding properties including improved lithium plating/stripping performance and suppressed shuttle effect for Li–S batteries owing to its special solvation sheath of Li + .
- 29 September 2016
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 4 (43) , 16968-16974
Enhanced performance of lithium sulfur batteries with conductive polymer modified separators
The separators of Li–S batteries are modified with polypyrrole (PPy) nanotubes, PPy nanowires and reduced graphene oxide (rGO), respectively. All the conductive materials for the separator surface decoration can inhibit the migration of lithium polysulfides in the electrolyte and decrease the polarization of the sulfur cathode. Thus, the shuttle effect and redistribution of the active material can be suppressed during the charge/discharge process, resulting in enhanced performance. Moreover, the adsorption effect of PPy to lithium polysulfides is stronger compared to that of rGO, and the wettability of the PPy modified separators towards the electrolyte is much better, resulting in further enhanced electrochemical performance of Li–S batteries. Particularly, with approximately 2.5–3 mg cm−2 sulfur loading, the Li–S battery using the PPy nanotube modified separator displays an initial discharge capacity of 1110.4 mA h g−1, and a retained capacity of 801.6 mA h g−1 after 300 cycles at 0.5C, demonstrating an average coulombic efficiency up to 90.6% in the LiNO3-free electrolyte.
- 29 September 2016
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 4 (43) , 16968-16974
Enhanced performance of lithium sulfur batteries with conductive polymer modified separators
The separators of Li–S batteries are modified with polypyrrole (PPy) nanotubes, PPy nanowires and reduced graphene oxide (rGO), respectively. All the conductive materials for the separator surface decoration can inhibit the migration of lithium polysulfides in the electrolyte and decrease the polarization of the sulfur cathode. Thus, the shuttle effect and redistribution of the active material can be suppressed during the charge/discharge process, resulting in enhanced performance. Moreover, the adsorption effect of PPy to lithium polysulfides is stronger compared to that of rGO, and the wettability of the PPy modified separators towards the electrolyte is much better, resulting in further enhanced electrochemical performance of Li–S batteries. Particularly, with approximately 2.5–3 mg cm−2 sulfur loading, the Li–S battery using the PPy nanotube modified separator displays an initial discharge capacity of 1110.4 mA h g−1, and a retained capacity of 801.6 mA h g−1 after 300 cycles at 0.5C, demonstrating an average coulombic efficiency up to 90.6% in the LiNO3-free electrolyte.
- 1 January 2015
- Published by Elsevier in Journal of Power Sources
- Vol. 273, 511-516
Enhanced performance of lithium sulfur battery with self-assembly polypyrrole nanotube film as the functional interlayer
- 1 January 2015
- Published by Elsevier in Journal of Power Sources
- Vol. 273, 511-516
Enhanced performance of lithium sulfur battery with self-assembly polypyrrole nanotube film as the functional interlayer
- 23 September 2014
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 2 (45) , 19355-19359
Enhanced cycle performance of a Li–S battery based on a protected lithium anode
A conductive polymer layer is prepared on the surface of a lithium anode as the protective layer for a Li–S battery. With the protective layer, a stable and less resistive SEI is formed between the ether-based electrolyte and the Li anode, it can not only inhibit the corrosion reaction between the lithium anode and lithium polysulfides effectively, but also suppress the growth of Li dendrites. Particularly, with approximately 2.5–3 mg cm−2 sulfur loading on the electrode and commercial electrolyte, the discharge capacity remains at 815 mA h g−1 after 300 cycles at 0.5 C with an average coulombic efficiency of 91.3%.
- 23 September 2014
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 2 (45) , 19355-19359
Enhanced cycle performance of a Li–S battery based on a protected lithium anode
A conductive polymer layer is prepared on the surface of a lithium anode as the protective layer for a Li–S battery. With the protective layer, a stable and less resistive SEI is formed between the ether-based electrolyte and the Li anode, it can not only inhibit the corrosion reaction between the lithium anode and lithium polysulfides effectively, but also suppress the growth of Li dendrites. Particularly, with approximately 2.5–3 mg cm−2 sulfur loading on the electrode and commercial electrolyte, the discharge capacity remains at 815 mA h g−1 after 300 cycles at 0.5 C with an average coulombic efficiency of 91.3%.
- 22 September 2014
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 50 (91) , 14209-14212
A lithium anode protection guided highly-stable lithium–sulfur battery
A Li3N protection layer is fabricated on the surface of a Li anode by anin situmethod to suppress the shuttle effect on the basis of anode protection.
- 22 September 2014
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 50 (91) , 14209-14212
A lithium anode protection guided highly-stable lithium–sulfur battery
A Li3N protection layer is fabricated on the surface of a Li anode by anin situmethod to suppress the shuttle effect on the basis of anode protection.
- 1 September 2014
- Published by Elsevier in Solid State Ionics
- Vol. 262, 174-178
The enhanced performance of Li–S battery with P14YRTFSI-modified electrolyte
- 1 September 2014
- Published by Elsevier in Solid State Ionics
- Vol. 262, 174-178
The enhanced performance of Li–S battery with P14YRTFSI-modified electrolyte