Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Sudeshna Chandra has a total of 59 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • In silico analysis of non-conventional gene targets for genetic interventions to enhance fatty acid production: a review

    by Neha Sawant, Sudeshna Chandra, Deepti Appukuttan, Harinder Singh

    Since the 1990s, fatty acids (FA) have drawn significant industrial attention due to their diverse applications creating a demand for biological systems capable of producing high FA titers. While various strategies have been explored to achieve this, many of the conventional approaches rely on extensive genetic manipulations, which often result in strain instability, thus limiting its potential to yield better FA titers. Moreover, stresses such as pH, osmotic, and oxidative imbalances generated during FA production aggravate these challenges, further limiting FA titers. Under stress conditions, the cellular system responds by regulating stress-response proteins to bring about homeostasis. Recent findings suggest that transmembrane proteins, regulators of two-component systems, and cytoplasmic regulators can be strategically leveraged to address the problems related to stress-induced strain instability. Thus, non-conventional genetic targets, like chaperones (e.g., heat shock proteins) and DNA-binding transcriptional regulators (e.g., RcdA), which are not directly involved in FA metabolism, represent promising candidates to enhance strain stability and FA yields. Tools like Opt-Box and Weighted Gene Co-expression Network Analysis (WGCNA) serve as excellent platforms for understanding the cross-talk between these regulators and downstream enzymes. This review emphasizes the need for a shift towards identifying novel genetic targets by employing advanced in silico analysis and explains several molecular techniques that can aid in strain construction. Lastly, it discusses certain non-conventional gene targets that can help to overcome strain instability arising due to various stresses generated during/due to FA production.


  • Open Access

    Maximizing Upconversion Luminescence of Co-Doped CaF₂:Yb, Er Nanoparticles at Low Laser Power for Efficient Cellular Imaging

    by Neha Dubey, Sonali Gupta, Sandeep B. Shelar, K. C. Barick, Sudeshna Chandra

    Upconversion nanoparticles (UCNPs) are well-reported for bioimaging. However, their applications are limited by low luminescence intensity. To enhance the intensity, often the UCNPs are coated with macromolecules or excited with high laser power, which is detrimental to their long-term biological applications. Herein, we report a novel approach to prepare co-doped CaF2:Yb3+ (20%), Er3+ with varying concentrations of Er (2%, 2.5%, 3%, and 5%) at ambient temperature with minimal surfactant and high-pressure homogenization. Strong luminescence and effective red emission of the UCNPs were seen even at low power and without functionalization. X-ray diffraction (XRD) of UCNPs revealed the formation of highly crystalline, single-phase cubic fluorite-type nanostructures, and transmission electron microscopy (TEM) showed co-doped UCNPs are of ~12 nm. The successful doping of Yb and Er was evident from TEM–energy dispersive X-ray analysis (TEM-EDAX) and X-ray photoelectron spectroscopy (XPS) studies. Photoluminescence studies of UCNPs revealed the effect of phonon coupling between host lattice (CaF2), sensitizer (Yb3+), and activator (Er3+). They exhibited tunable upconversion luminescence (UCL) under irradiation of near-infrared (NIR) light (980 nm) at low laser powers (0.28–0.7 W). The UCL properties increased until 3% doping of Er3+ ions, after which quenching of UCL was observed with higher Er3+ ion concentration, probably due to non-radiative energy transfer and cross-relaxation between Yb3+-Er3+ and Er3+-Er3+ ions. The decay studies aligned with the above observation and showed the dependence of UCL on Er3+ concentration. Further, the UCNPs exhibited strong red emission under irradiation of 980 nm light and retained their red luminescence upon internalization into cancer cell lines, as evident from confocal microscopic imaging. The present study demonstrated an effective approach to designing UCNPs with tunable luminescence properties and their capability for cellular imaging under low laser power.


  • Open Access

    Miniaturized Biosensors Based on Lanthanide-Doped Upconversion Polymeric Nanofibers

    by Neha Dubey, Sudeshna Chandra

    Electrospun nanofibers possess a large surface area and a three-dimensional porous network that makes them a perfect material for embedding functional nanoparticles for diverse applications. Herein, we report the trends in embedding upconversion nanoparticles (UCNPs) in polymeric nanofibers for making an advanced miniaturized (bio)analytical device. UCNPs have the benefits of several optical properties, like near-infrared excitation, anti-Stokes emission over a wide range from UV to NIR, narrow emission bands, an extended lifespan, and photostability. The luminescence of UCNPs can be regulated using different lanthanide elements and can be used for sensing and tracking physical processes in biological systems. We foresee that a UCNP-based nanofiber sensing platform will open opportunities in developing cost-effective, miniaturized, portable and user-friendly point-of-care sensing device for monitoring (bio)analytical processes. Major challenges in developing microfluidic (bio)analytical systems based on UCNPs@nanofibers have been reviewed and presented.


  • Spray drying encapsulation of essential oils: Insights on various factors affecting the physicochemical properties of the microcapsules

    by Shirish K. Phanse, Sudeshna Chandra

    Spray drying is a process that involves instantaneous conversion of a liquid or slurry into a free‐flowing powder in the presence of hot air or nitrogen gas current in a drying chamber. The technique is usually used to encapsulate active molecules like essential oils, plant extracts, fragrances, flavours and enzymes within a wall material. The encapsulation provides chemical and physical stability to the actives by converting them into free‐flowing powders which prevents their susceptibility to external atmospheric conditions like temperature, humidity, UV exposure and chemical oxidation. Spray drying encapsulation has an edge over other encapsulation techniques because it is fast, simple, efficient and economically feasible. The article focuses on encapsulating various essential oils within natural polymers and emulsifiers by spray drying methods to form stable microcapsules. The review also provides information on different types of spray drying equipment and process parameters like the type of atomiszer and nozzles, inlet–outlet temperature and type of cyclones. All the process parameters and materials are found to influence the physicochemical properties of the microencapsulates of essential oils. The review also discusses the effects of process parameters and materials on the encapsulation efficiency, moisture content, bulk and tapped density, agglomeration properties and thermal stability of the microencapsulates. Thus, the consolidated review will provide an overview of various optimization parameters and governing factors for obtaining microencapsulates of essential oils.


  • Open Access

    Metal Sulfide Nanoparticles for Imaging and Phototherapeutic Applications

    by Aishwarya Shetty, Heinrich Lang, Sudeshna Chandra

    The intriguing properties of metal sulfide nanoparticles (=MxSy-NPs), particularly transition metal dichalcogenides, are discussed for their use in diverse biological applications. Herein, recent advances in MxSy-NPs-based imaging (MRI, CT, optical and photoacoustic) and phototherapy (photothermal and photodynamic) are presented. Also, recent made progress in the use of immuno-phototherapy combinatorial approaches in vitro and in vivo are reported. Furthermore, challenges in nanomaterials-based therapies and future research directions by applying MxSy-NPs in combinatorial therapies are envisaged.


  • Open Access

    Physico-Chemical and Antimicrobial Efficacy of Encapsulated Dhavana Oil: Evaluation of Release and Stability Profile from Base Matrices

    by Shirish K. Phanse, Shriya Sawant, Harinder Singh, Sudeshna Chandra

    Essential oils (EOs) are naturally occurring volatile aromatic compounds extracted from different parts of plants. They are made up of components like terpenes, phenols, etc., and are chemically unstable and susceptible to oxidative deterioration, leading to reduced shelf-life and overall degradation of the product. Encapsulation of EOs in a matrix can prevent degradation of the active ingredient and improve the shelf-life. In this paper, we report encapsulation of Dhavana oil (Artemisia pellen) in a modified starch matrix using a spray-drying technique. Physico-chemical properties of neat and encapsulated Dhavana oil were studied. We selected two powder bases: CaCO3 and TALC and, loaded neat and encapsulated Dhavana oil in it, studied their stability and interaction with the base matrices at 3 °C, 22 °C and 45 °C up to 2 months under closed conditions and one week at 22 °C and 45 °C under open condition. Thermal degradation pattern was studied for neat and encapsulated Dhavana oil and modified starch. Release of primary active component of neat and encapsulated Dhavana oil from the base matrices was evaluated with GCMS. Stability study and release mechanism were elucidated to understand the release pattern in different base powders under similar conditions. Retention of hydroxydhavanone was found to be better in TALC than CaCO3, and therefore, the former can be considered a suitable base matrix for developing a stable powder formulation with an optimum release of the oil. Dhavana oil is known for its anti-microbial activity, and hence, neat and encapsulated Dhavana oil was tested on different bacterial and fungal strains. The encapsulated oil depicted good anti-microbial efficacy against various bacterial and fungal strains, which is a step forward for developing anti-microbial formulations. Thus, the reported work will provide helpful information on cosmetic formulation and, therefore, be useful for perfumery, food, and cosmetic industries.


  • Facile and Selective Mono Benzylation of Naphthalene Using Atom Efficient Chloroaluminate Ionic Liquid

    by Mangesh Sakhalkar, Sharad V. Lande, Sudeshna Chandra

    Benzyl naphthalenes are versatile compounds having multiple applications in dyes, fine chemicals, and pharmaceuticals etc. Herein, we present benzylation of naphthalene with benzyl chloride using a chloroaluminate ionic liquid which we have reported recently. The catalyst is highly active, selective and required in very low quantity i.e., 0.5% w/w to drive the reaction. The reaction was carried out at ambient temperature and pressure which has an edge over other existing catalysts that requires elevated temperature. The conversion of benzyl chloride and selectivity toward mono-benzylated product was found to be more than 95% and 90%, respectively. The formation of the product was confirmed by GC-MS. Various reaction parameters like temperature, catalyst concentration, mole ratio of benzyl chloride and naphthalene were investigated to optimize the best operating conditions to obtain the mono benzylated naphthalene. The catalyst was efficiently recyclized up to 5 times. The easy single-step synthesis of the catalysts, use of hydrophobic neutral ligand, better atom economy, makes the process more attractive for its application in benzylation reaction of naphthalene.