Jem Pitcairn
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jem Pitcairn has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Matthew J. Cliffe
School of Chemistry, University of Nottingham, University Park, Nottingham NG7 2RD, United Kingdom
8 shared publications - Andrew J. Morris
School of Metallurgy and Materials University of Birmingham Edgbaston UK
3 shared publications - Emily Myatt
School of Chemistry, University of Nottingham, Nottingham NG7 2RD, UK
3 shared publications - Gregor Kieslich
Technical University of Munich
3 shared publications - Silva Maria Kronawitter
TUM Natural School of Sciences, Technical University of Munich, D-85748 Garching, Germany
3 shared publications - Dominik Daisenberger
Diamond Light Source Ltd, Harwell Campus, Didcot OX11 0DE, UK
2 shared publications
Latest Publications
- Open Access
- 26 May 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (11) , 5649-5657
Enhancing Superexchange through Frontier Orbital Engineering in a van der Waals Metal–Organic Magnet
Van der Waals metal–organic magnets (vdW MOMs) offer the possibility of realizing a wide range of magnetic functionalities not possible in inorganic vdW magnets. In particular, their modularity allows for specific control over ligand-mediated superexchange and hence their ground states. We report a new vdW MOM, CrCl2(btd) (btd = 2,1,3-benzothiadiazole), assembled from a high-energy early transition metal and a redox-active ligand, which leads to a small charge-transfer gap. We solve the structure using a combination of powder neutron diffraction and single-crystal electron diffraction, showing that this material contains Cr2+btd0. Magnetometry, neutron diffraction, and inelastic neutron scattering measurements allow us to quantitatively determine the magnetic properties of this vdW magnet, showing it is a collinear rectangular antiferromagnet with small easy-axis anisotropy (JCl = −15.31(5) K, Jbtd = −6.96(10) K, D = −2.0(2) K). Critically, we find that the superexchange through btd, with a low-lying LUMO, is significantly stronger than in the CrCl2(pym) (pym = pyrimidine) analogue (Jpym = +1.2(2) K), demonstrating that exchange can be enhanced by potentially redox-active ligands without actual electron-transfer onto ligands. This work provides a route toward vdW antiferromagnetic MOMs with strong magnetic superexchange.
- 26 May 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (11) , 5649-5657
Open AccessEnhancing Superexchange through Frontier Orbital Engineering in a van der Waals Metal–Organic Magnet
Van der Waals metal–organic magnets (vdW MOMs) offer the possibility of realizing a wide range of magnetic functionalities not possible in inorganic vdW magnets. In particular, their modularity allows for specific control over ligand-mediated superexchange and hence their ground states. We report a new vdW MOM, CrCl2(btd) (btd = 2,1,3-benzothiadiazole), assembled from a high-energy early transition metal and a redox-active ligand, which leads to a small charge-transfer gap. We solve the structure using a combination of powder neutron diffraction and single-crystal electron diffraction, showing that this material contains Cr2+btd0. Magnetometry, neutron diffraction, and inelastic neutron scattering measurements allow us to quantitatively determine the magnetic properties of this vdW magnet, showing it is a collinear rectangular antiferromagnet with small easy-axis anisotropy (JCl = −15.31(5) K, Jbtd = −6.96(10) K, D = −2.0(2) K). Critically, we find that the superexchange through btd, with a low-lying LUMO, is significantly stronger than in the CrCl2(pym) (pym = pyrimidine) analogue (Jpym = +1.2(2) K), demonstrating that exchange can be enhanced by potentially redox-active ligands without actual electron-transfer onto ligands. This work provides a route toward vdW antiferromagnetic MOMs with strong magnetic superexchange.
- Open Access
- 25 February 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Enhancing superexchange through frontier orbital engineering in a van der Waals metal-organic magnet
Van der Waals metal-organic magnets (vdW MOMs) offer the possibility of realising a wide range of magnetic functionalities not possible in inorganic vdW magnets. In particular, their modularity allows for specific control over ligand-mediated superex- change and hence their ground states. We report a new vdW MOM, CrCl2(btd) (btd = 2,1,3-benzothiadiazole), assembled from a high-energy early transition metal and a redox-active ligand, which leads to a small charge-transfer gap. We solve the structure using a combination of powder neutron diffraction and single crystal electron diffrac- tion, showing that this material contains Cr2+btd0. Magnetometry, neutron diffraction and inelastic neutron scattering measurements allow us to quantitatively determine the magnetic properties of this vdW magnet, showing it is a collinear rectangular antifer- romagnet with small easy-axis anisotropy (JCl = −15.31(5) K, Jbtd = −6.96(10) K, D = −2.0(2) K). Critically, we find that the superexchange through btd, with a low lying LUMO, is significantly stronger than in the CrCl2(pym) (pym = pyrimidine) analogue (Jpym = 1.2(2) K), demonstrating that exchange can be enhanced by potentially redox-active ligands without actual electron-transfer onto ligands. This work provides a route towards vdW antiferromagnetic MOMs with strong magnetic superexchange.
- 25 February 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessEnhancing superexchange through frontier orbital engineering in a van der Waals metal-organic magnet
Van der Waals metal-organic magnets (vdW MOMs) offer the possibility of realising a wide range of magnetic functionalities not possible in inorganic vdW magnets. In particular, their modularity allows for specific control over ligand-mediated superex- change and hence their ground states. We report a new vdW MOM, CrCl2(btd) (btd = 2,1,3-benzothiadiazole), assembled from a high-energy early transition metal and a redox-active ligand, which leads to a small charge-transfer gap. We solve the structure using a combination of powder neutron diffraction and single crystal electron diffrac- tion, showing that this material contains Cr2+btd0. Magnetometry, neutron diffraction and inelastic neutron scattering measurements allow us to quantitatively determine the magnetic properties of this vdW magnet, showing it is a collinear rectangular antifer- romagnet with small easy-axis anisotropy (JCl = −15.31(5) K, Jbtd = −6.96(10) K, D = −2.0(2) K). Critically, we find that the superexchange through btd, with a low lying LUMO, is significantly stronger than in the CrCl2(pym) (pym = pyrimidine) analogue (Jpym = 1.2(2) K), demonstrating that exchange can be enhanced by potentially redox-active ligands without actual electron-transfer onto ligands. This work provides a route towards vdW antiferromagnetic MOMs with strong magnetic superexchange.
- Open Access
- 4 August 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Enhancing superexchange through frontier orbital engineering in a van der Waals metal-organic magnet
Van der Waals metal-organic magnets (vdW MOMs) offer the possibility of realis- ing a wide-range of magnetic functionalities not possible in inorganic vdW magnets. In particular, they offer the opportunity to enhance magnetic interactions using organic functionalisation to control ligand energy levels directly. We report a new vdW MOM, CrCl2(btd) (btd = 2,1,3-benzothiadiazole), assembled from a high energy early transi- tion metal and a redox-active ligand, which leads to a small charge-transfer gap. We solve the structure using a combination of powder neutron diffraction and single crystal electron diffraction, showing that this material contains Cr2+btd0. Magnetometry, neutron diffraction and inelastic neutron scattering allow us to quantitatively determine the magnetic properties of this vdW magnet, showing it is a collinear rectangular antiferromagnetwithsmalleasyaxisanisotropy(JCl =−15.31(5)K,Jbtd =−6.96(10)K, D = −2.0(2) K). Critically, we find that the superexchange through the redox-active btd is significantly stronger than in the non-redox-active CrCl2(pym) (pym = pyrimidine) analogue (Jpym = 1.2(2)K), demonstrating that exchange can be enhanced without the need for electron transfer onto ligands. This work provides a route towards vdW MOMs with strong magnetic superexchange.
- 4 August 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessEnhancing superexchange through frontier orbital engineering in a van der Waals metal-organic magnet
Van der Waals metal-organic magnets (vdW MOMs) offer the possibility of realis- ing a wide-range of magnetic functionalities not possible in inorganic vdW magnets. In particular, they offer the opportunity to enhance magnetic interactions using organic functionalisation to control ligand energy levels directly. We report a new vdW MOM, CrCl2(btd) (btd = 2,1,3-benzothiadiazole), assembled from a high energy early transi- tion metal and a redox-active ligand, which leads to a small charge-transfer gap. We solve the structure using a combination of powder neutron diffraction and single crystal electron diffraction, showing that this material contains Cr2+btd0. Magnetometry, neutron diffraction and inelastic neutron scattering allow us to quantitatively determine the magnetic properties of this vdW magnet, showing it is a collinear rectangular antiferromagnetwithsmalleasyaxisanisotropy(JCl =−15.31(5)K,Jbtd =−6.96(10)K, D = −2.0(2) K). Critically, we find that the superexchange through the redox-active btd is significantly stronger than in the non-redox-active CrCl2(pym) (pym = pyrimidine) analogue (Jpym = 1.2(2)K), demonstrating that exchange can be enhanced without the need for electron transfer onto ligands. This work provides a route towards vdW MOMs with strong magnetic superexchange.
- Open Access
- 22 October 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 60 (97) , 14427-14430
Ligand solid-solution tuning of magnetic and mechanical properties of the van der Waals metal–organic magnet NiCl 2 (btd) 1− x (bod) x
Van der Waals (vdW) magnets offer unique opportunities for exploring magnetism in the 2D limit. Metal-organic magnets (MOM) are of particular interest as the functionalisation of organic ligands can control their physical properties. Here, we demonstrate tuning of mechanical and magnetic function of a noncollinear vdW ferromagnet, NiCl2(btd) (btd = 2,1,3-benzothiadiazole), through creating solid-solutions with the oxygen-substituted analogue ligand 2,1,3-benzoxadiazole (bod). We synthesise solid-solutions, NiCl2(btd)1–x(bod)x , up to x = 0.33 above which we find mixtures form, primarily composed of a new 1D coordination polymer NiCl2(bod)2. Magnetometry on this series shows that bod incorporation reduces the coercivity significantly (up to 60%), without significantly altering the ordering temperatures. Our high pressure synchrotron diffraction measurements up to 0.4 GPa demonstrate that the stiffest axis is the b axis, through the Ni-N-(O/S)-N-Ni bonds, and the softest is the interlayer direction. Doping with bod fine-tunes this compressibility, softening the layers, but stiffening the interlayer axis. This demonstrates that substitution of organic ligands in vdW MOMs can be used to realise targetted magnetic and mechanical properties.
- 22 October 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 60 (97) , 14427-14430
Open AccessLigand solid-solution tuning of magnetic and mechanical properties of the van der Waals metal–organic magnet NiCl 2 (btd) 1− x (bod) x
Van der Waals (vdW) magnets offer unique opportunities for exploring magnetism in the 2D limit. Metal-organic magnets (MOM) are of particular interest as the functionalisation of organic ligands can control their physical properties. Here, we demonstrate tuning of mechanical and magnetic function of a noncollinear vdW ferromagnet, NiCl2(btd) (btd = 2,1,3-benzothiadiazole), through creating solid-solutions with the oxygen-substituted analogue ligand 2,1,3-benzoxadiazole (bod). We synthesise solid-solutions, NiCl2(btd)1–x(bod)x , up to x = 0.33 above which we find mixtures form, primarily composed of a new 1D coordination polymer NiCl2(bod)2. Magnetometry on this series shows that bod incorporation reduces the coercivity significantly (up to 60%), without significantly altering the ordering temperatures. Our high pressure synchrotron diffraction measurements up to 0.4 GPa demonstrate that the stiffest axis is the b axis, through the Ni-N-(O/S)-N-Ni bonds, and the softest is the interlayer direction. Doping with bod fine-tunes this compressibility, softening the layers, but stiffening the interlayer axis. This demonstrates that substitution of organic ligands in vdW MOMs can be used to realise targetted magnetic and mechanical properties.
- Open Access
- 4 July 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Tuning the Mechanical Properties of Molecular Perovskites by Controlling Framework Distortions via A-site Substitution
Molecular perovskites are important materials in the area of barocalorics, improper ferroelectrics and ferroelastics, where the search for principles that link composition, structure and mechanical properties is a key challenge. Herein, we report the synthesis of a new series of dicyanamide-based molecular perovskites [A]Ni(C2N3)3, where A+ is a range of alkylated piperidinium cations. We use this new family to explore how A+ cations determine their mechanical response by measuring the bulk modulus (B) – using high-pressure powder X-ray diffraction. Within the series, we find a positive correlation between the network distortions of the pseudocubic [Ni(C2N3)3]– network and B. Furthermore, we show that we can tune framework distortions, and therefore B, by synthesising A-site solid solutions. The applied methodology is a blueprint for linking framework distortions and mechanical properties in network materials and guides us toward principles for designing macroscopic properties via systematic compositional changes in molecular perovskites.
- 4 July 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessTuning the Mechanical Properties of Molecular Perovskites by Controlling Framework Distortions via A-site Substitution
Molecular perovskites are important materials in the area of barocalorics, improper ferroelectrics and ferroelastics, where the search for principles that link composition, structure and mechanical properties is a key challenge. Herein, we report the synthesis of a new series of dicyanamide-based molecular perovskites [A]Ni(C2N3)3, where A+ is a range of alkylated piperidinium cations. We use this new family to explore how A+ cations determine their mechanical response by measuring the bulk modulus (B) – using high-pressure powder X-ray diffraction. Within the series, we find a positive correlation between the network distortions of the pseudocubic [Ni(C2N3)3]– network and B. Furthermore, we show that we can tune framework distortions, and therefore B, by synthesising A-site solid solutions. The applied methodology is a blueprint for linking framework distortions and mechanical properties in network materials and guides us toward principles for designing macroscopic properties via systematic compositional changes in molecular perovskites.
- Open Access
- 23 February 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (14) , 4954-4960
Spin-state dependent pressure responsiveness of Fe( ii )-based triazolate metal–organic frameworks
Fe(II)-containing Metal-Organic Frameworks (MOFs) that exhibit temperature-induced spin-crossover (SCO) are candidate materials in the field of sensing, barocalorics, and data storage. Their responsiveness towards pressure is therefore of practical importance and is related to their longevity and processibility. The impact of Fe(II) spin-state on the pressure responsiveness of MOFs is yet unexplored. Here we report the synthesis of two new Fe(II)-based MOFs, i.e. Fe(cta)2 ((cta)– = 1,4,5,6-tetrahydrocyclopenta[d][1,2,3]triazolate) and Fe(mta)2 ((mta)– = methyl[1,2,3]triazolate), which are both in high-spin at room temperature. Together with the isostructural MOF Fe(ta)2 ((ta)– = [1,2,3]triazolate), which is in its low-spin state at room temperature, we apply these as model systems to show how spin-state controls their mechanical properties. As a proxy, we use their bulk modulus, which was obtained via high-pressure powder X-ray diffraction experiments. We find that an interplay of spin-state, steric effects, void fraction, and absence of available distortion modes dictates their pressure-induced structural distortions. Our results show for the first time the role of spin-state on the pressure-induced structural deformations in MOFs and bring us a step closer to estimating the effect of pressure as a stimulus on MOFs a priori.
- 23 February 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (14) , 4954-4960
Open AccessSpin-state dependent pressure responsiveness of Fe( ii )-based triazolate metal–organic frameworks
Fe(II)-containing Metal-Organic Frameworks (MOFs) that exhibit temperature-induced spin-crossover (SCO) are candidate materials in the field of sensing, barocalorics, and data storage. Their responsiveness towards pressure is therefore of practical importance and is related to their longevity and processibility. The impact of Fe(II) spin-state on the pressure responsiveness of MOFs is yet unexplored. Here we report the synthesis of two new Fe(II)-based MOFs, i.e. Fe(cta)2 ((cta)– = 1,4,5,6-tetrahydrocyclopenta[d][1,2,3]triazolate) and Fe(mta)2 ((mta)– = methyl[1,2,3]triazolate), which are both in high-spin at room temperature. Together with the isostructural MOF Fe(ta)2 ((ta)– = [1,2,3]triazolate), which is in its low-spin state at room temperature, we apply these as model systems to show how spin-state controls their mechanical properties. As a proxy, we use their bulk modulus, which was obtained via high-pressure powder X-ray diffraction experiments. We find that an interplay of spin-state, steric effects, void fraction, and absence of available distortion modes dictates their pressure-induced structural distortions. Our results show for the first time the role of spin-state on the pressure-induced structural deformations in MOFs and bring us a step closer to estimating the effect of pressure as a stimulus on MOFs a priori.
- Open Access
- 27 November 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (22)
Bi2Se3 interlayer treatments affecting the Y3Fe5O12 (YIG) platinum spin Seebeck effect
In this work, we present a method to enhance the longitudinal spin Seebeck effect at platinum/yttrium iron garnet (Pt/YIG) interfaces. The introduction of a partial interlayer of bismuth selenide (Bi2Se3, 2.5% surface coverage) interfaces significantly increases (by ∼380%–690%) the spin Seebeck coefficient over equivalent Pt/YIG control devices. Optimal devices are prepared by transferring Bi2Se3 nanoribbons, prepared under anaerobic conditions, onto the YIG (111) chips followed by rapid over-coating with Pt. The deposited Pt/Bi2Se3 nanoribbon/YIG assembly is characterized by scanning electron microscope. The expected elemental compositions of Bi2Se3 and YIG are confirmed by energy dispersive x-ray analysis. A spin Seebeck coefficient of 0.34–0.62 μV/K for Pt/Bi2Se3/YIG is attained for our devices, compared to just 0.09 μV/K for Pt/YIG controls at a 12 K thermal gradient and a magnetic field swept from −50 to +50 mT. Superconducting quantum interference device magnetometer studies indicate that the magnetic moment of Pt/Bi2Se3/YIG treated chips is increased by ∼4% vs control Pt/YIG chips (i.e., a significant increase vs the ±0.06% chip mass reproducibility). Increased surface magnetization is also detected in magnetic force microscope studies of Pt/Bi2Se3/YIG, suggesting that the enhancement of spin injection is associated with the presence of Bi2Se3 nanoribbons.
- 27 November 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (22)
Open AccessBi2Se3 interlayer treatments affecting the Y3Fe5O12 (YIG) platinum spin Seebeck effect
In this work, we present a method to enhance the longitudinal spin Seebeck effect at platinum/yttrium iron garnet (Pt/YIG) interfaces. The introduction of a partial interlayer of bismuth selenide (Bi2Se3, 2.5% surface coverage) interfaces significantly increases (by ∼380%–690%) the spin Seebeck coefficient over equivalent Pt/YIG control devices. Optimal devices are prepared by transferring Bi2Se3 nanoribbons, prepared under anaerobic conditions, onto the YIG (111) chips followed by rapid over-coating with Pt. The deposited Pt/Bi2Se3 nanoribbon/YIG assembly is characterized by scanning electron microscope. The expected elemental compositions of Bi2Se3 and YIG are confirmed by energy dispersive x-ray analysis. A spin Seebeck coefficient of 0.34–0.62 μV/K for Pt/Bi2Se3/YIG is attained for our devices, compared to just 0.09 μV/K for Pt/YIG controls at a 12 K thermal gradient and a magnetic field swept from −50 to +50 mT. Superconducting quantum interference device magnetometer studies indicate that the magnetic moment of Pt/Bi2Se3/YIG treated chips is increased by ∼4% vs control Pt/YIG chips (i.e., a significant increase vs the ±0.06% chip mass reproducibility). Increased surface magnetization is also detected in magnetic force microscope studies of Pt/Bi2Se3/YIG, suggesting that the enhancement of spin injection is associated with the presence of Bi2Se3 nanoribbons.
- Open Access
- 10 January 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Low dimensional metal-organic magnets as a route towards the S=2 Haldane phase
Metal-organic magnets (MOMs), modular magnetic materials where metal atoms are connected by organic linkers, are promising candidates for next-generation quantum technologies. MOMs readily form low-dimensional structures, and so are ideal systems to realise physical examples of key quantum models, including the Haldane phase, where a topological excitation gap occurs in integer-spin antiferromagnetic (AFM) chains. Thus far the Haldane phase has only been identified for S = 1, with S ≥ 2 still unrealised because the larger spin imposes more stringent requirements on the magnetic interactions. Here, we report the structure and magnetic properties of CrCl2(pym) (pym=pyrimidine), a new quasi-1D S = 2 AFM MOM. We show, using X-ray and neutron diffraction, bulk property measurements, density-functional theory calculations and inelastic neutron spectroscopy (INS) that CrCl2(pym) consists of AFM CrCl2 spin chains (J1 = −1.13(4) meV) which are weakly ferromagnetically coupled through bridging pym (J2 = 0.10(2) meV), with easy-axis anisotropy (D = −0.11(1) meV). We find that although small compared to J1, these additional interactions are sufficient to pre- vent observation of the Haldane phase in this material. Nevertheless, the proximity to the Haldane phase together with the modularity of MOMs suggests that layered Cr(II) MOMs are a promising family to search for the elusive S = 2 Haldane phase.
- 10 January 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessLow dimensional metal-organic magnets as a route towards the S=2 Haldane phase
Metal-organic magnets (MOMs), modular magnetic materials where metal atoms are connected by organic linkers, are promising candidates for next-generation quantum technologies. MOMs readily form low-dimensional structures, and so are ideal systems to realise physical examples of key quantum models, including the Haldane phase, where a topological excitation gap occurs in integer-spin antiferromagnetic (AFM) chains. Thus far the Haldane phase has only been identified for S = 1, with S ≥ 2 still unrealised because the larger spin imposes more stringent requirements on the magnetic interactions. Here, we report the structure and magnetic properties of CrCl2(pym) (pym=pyrimidine), a new quasi-1D S = 2 AFM MOM. We show, using X-ray and neutron diffraction, bulk property measurements, density-functional theory calculations and inelastic neutron spectroscopy (INS) that CrCl2(pym) consists of AFM CrCl2 spin chains (J1 = −1.13(4) meV) which are weakly ferromagnetically coupled through bridging pym (J2 = 0.10(2) meV), with easy-axis anisotropy (D = −0.11(1) meV). We find that although small compared to J1, these additional interactions are sufficient to pre- vent observation of the Haldane phase in this material. Nevertheless, the proximity to the Haldane phase together with the modularity of MOMs suggests that layered Cr(II) MOMs are a promising family to search for the elusive S = 2 Haldane phase.