Chengyu Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Chengyu Zhou has a total of 73 co-authors. Here are the top co-authors by number of shared publications:
Yuzhu Fan
College of Chemistry and Chemical Engineering Chongqing University of Science and Technology Chongqing China
6 shared publicationsDan Bao
College of Chemistry and Chemical Engineering Chongqing University of Science and Technology Chongqing China
5 shared publicationsMin Zhou
College of Chemistry & Chemical Engineering Chongqing University of Science & Technology Chongqing China
5 shared publicationsPeng Zhang
College of Chemistry & Chemical Engineering Chongqing University of Science & Technology Chongqing China
5 shared publicationsYing Xiao
China Petroleum Xinan Oil and Gas Field Company Chongqing Gas Mine Chongqing China
5 shared publicationsBenhui Li
4 shared publications
Latest Publications
- 9 November 2026
- Published by Wiley in The Canadian Journal of Chemical Engineering
Construction and synergistic mechanism of self‐assembled nano‐unit clean fracturing fluid system
Conventional viscoelastic surfactant based clean fracturing fluids suffer from insufficient temperature tolerance and poor proppant carrying capacity, which restrict their application in medium deep oil gas reservoirs. In this work, a quaternary ammonium salt surfactant ODHAB‐18 was synthesized via a one‐step reaction. Nano silica (SiO 2 ‐16) was further modified by hexadecyltrimethoxysilane, and sodium salicylate (NaSal) was introduced as the counter ion additive to construct a novel nanocomposite clean fracturing fluid system. The optimal formulation was determined to be 3 wt.% ODHAB‐18, 0.1 wt.% modified SiO 2 ‐16, and 0.2 wt.% NaSal. Comprehensive performance evaluation and rheological tests were carried out for the composite system. Experimental results demonstrate that the nanocomposite system exhibits remarkably improved thermal tolerance compared with single component systems, reaching 70.5°C. At 25°C, the static proppant settling rate of the composite system is 0.044 mm · s −1 . Meanwhile, the system possesses favourable shear stability, and its gel breaking performance complies with industrial standards. Core damage test shows that the core permeability damage rate of composite system is 12.5%, which still satisfies the requirement of low damage fracturing fluid. Rheological analysis reveals that negatively charged SiO 2 ‐16 nanoparticles form electrostatic driven pseudo crosslinking with cationic ODHAB‐18 worm like micelles, which reinforces the compactness and stability of micellar network. This nanocomposite fracturing fluid exhibits promising application prospects for fracturing stimulation of medium deep oil and gas reservoirs.
- 9 November 2026
- Published by Wiley in The Canadian Journal of Chemical Engineering
Construction and synergistic mechanism of self‐assembled nano‐unit clean fracturing fluid system
Conventional viscoelastic surfactant based clean fracturing fluids suffer from insufficient temperature tolerance and poor proppant carrying capacity, which restrict their application in medium deep oil gas reservoirs. In this work, a quaternary ammonium salt surfactant ODHAB‐18 was synthesized via a one‐step reaction. Nano silica (SiO 2 ‐16) was further modified by hexadecyltrimethoxysilane, and sodium salicylate (NaSal) was introduced as the counter ion additive to construct a novel nanocomposite clean fracturing fluid system. The optimal formulation was determined to be 3 wt.% ODHAB‐18, 0.1 wt.% modified SiO 2 ‐16, and 0.2 wt.% NaSal. Comprehensive performance evaluation and rheological tests were carried out for the composite system. Experimental results demonstrate that the nanocomposite system exhibits remarkably improved thermal tolerance compared with single component systems, reaching 70.5°C. At 25°C, the static proppant settling rate of the composite system is 0.044 mm · s −1 . Meanwhile, the system possesses favourable shear stability, and its gel breaking performance complies with industrial standards. Core damage test shows that the core permeability damage rate of composite system is 12.5%, which still satisfies the requirement of low damage fracturing fluid. Rheological analysis reveals that negatively charged SiO 2 ‐16 nanoparticles form electrostatic driven pseudo crosslinking with cationic ODHAB‐18 worm like micelles, which reinforces the compactness and stability of micellar network. This nanocomposite fracturing fluid exhibits promising application prospects for fracturing stimulation of medium deep oil and gas reservoirs.
- 1 July 2026
- Published by Wiley in The Canadian Journal of Chemical Engineering
Covalent and noncovalent functionalization of graphene oxide: Enhancing dispersibility in polymer fracturing fluids
In this study, graphene oxide (GO) was prepared by the improved Hummers method and functionalized through covalent modification with GTMAC and non‐covalent modification with SDBS. Structural characterization confirmed successful modification, with X‐ray photoelectron spectroscopy (XPS) analysis demonstrating that GTMAC formed covalent bonds via epoxy group ring‐opening, while SDBS was adsorbed through hydrogen bonding. The modified materials exhibited significantly increased hydrodynamic diameters (with GO‐SDBS at 19.5 μm and GO‐GTMAC at 17.6 μm, compared to 4.61 μm for pristine GO) along with substantially enhanced wettability (as evidenced by contact angles decreasing to 38° and 39° from 52° for GO). The AASL/GO‐GTMAC composite system showed significantly improved dispersibility in polymers, providing important insights for GO surface functionalization strategies in polymer materials.
- 1 July 2026
- Published by Wiley in The Canadian Journal of Chemical Engineering
Covalent and noncovalent functionalization of graphene oxide: Enhancing dispersibility in polymer fracturing fluids
In this study, graphene oxide (GO) was prepared by the improved Hummers method and functionalized through covalent modification with GTMAC and non‐covalent modification with SDBS. Structural characterization confirmed successful modification, with X‐ray photoelectron spectroscopy (XPS) analysis demonstrating that GTMAC formed covalent bonds via epoxy group ring‐opening, while SDBS was adsorbed through hydrogen bonding. The modified materials exhibited significantly increased hydrodynamic diameters (with GO‐SDBS at 19.5 μm and GO‐GTMAC at 17.6 μm, compared to 4.61 μm for pristine GO) along with substantially enhanced wettability (as evidenced by contact angles decreasing to 38° and 39° from 52° for GO). The AASL/GO‐GTMAC composite system showed significantly improved dispersibility in polymers, providing important insights for GO surface functionalization strategies in polymer materials.
- 1 January 2026
- Published by Shanghai Institute of Ceramics in Journal of Inorganic Materials
- Vol. 41 (1) , 12
Graphene Oxide-based Adsorbents for Pb(II) Removing in Water: Progresses on Synthesis, Performance and Mechanism
- 1 January 2026
- Published by Shanghai Institute of Ceramics in Journal of Inorganic Materials
- Vol. 41 (1) , 12
Graphene Oxide-based Adsorbents for Pb(II) Removing in Water: Progresses on Synthesis, Performance and Mechanism
- 30 July 2025
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 50 (24) , 21363-21379
Development and Performance Optimization of a Micro–Nano-Polyamine Drilling Fluid System: Mechanistic Study on Wellbore Stability in Shaximiao Formation
- 30 July 2025
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 50 (24) , 21363-21379
Development and Performance Optimization of a Micro–Nano-Polyamine Drilling Fluid System: Mechanistic Study on Wellbore Stability in Shaximiao Formation
- 5 November 2024
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 103 (6) , 2937-2952
Preparation of adaptive bifunctional reconfigurable polymers and their sand carrying and drag reduction behaviour
In order to solve the problem of drag reduction at the front end of shale fractures and sand carrying at the tail end with increased viscosity, the molecular dynamics simulation (MD) method was used to design polymer molecules and simulate the steric resistance, interaction potential energy, mean square displacement, and radial distribution function of the polymer. The polymer AM‐AMPS‐LMA‐DiC 12 AM (ASLC12) with better solubility, diffusion, and resistance reduction potential was obtained and synthesized. By scanning electron microscope (SEM) and viscoelastic analysis, ASLC12 has a stable mesh structure, good viscoelasticity, and shear resistance, and the mesh structure formed by it is in a dynamic equilibrium state of fracture‐reorganization under shear. We then analyzed the drag reduction, sand carrying, and salt resistance of ASLC12. When the concentration of ASLC12 is 0.09%, the sand‐carrying requirement is satisfied. When the concentration is 0.05%, the drag reduction rate can reach 74.1%, and the resistance reduction rate of ASLC12 in salt ion solution can still reach more than 62%. This shows that the polymer ASLC12 has better sand carrying, drag reduction, and salt resistance.
- 5 November 2024
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 103 (6) , 2937-2952
Preparation of adaptive bifunctional reconfigurable polymers and their sand carrying and drag reduction behaviour
In order to solve the problem of drag reduction at the front end of shale fractures and sand carrying at the tail end with increased viscosity, the molecular dynamics simulation (MD) method was used to design polymer molecules and simulate the steric resistance, interaction potential energy, mean square displacement, and radial distribution function of the polymer. The polymer AM‐AMPS‐LMA‐DiC 12 AM (ASLC12) with better solubility, diffusion, and resistance reduction potential was obtained and synthesized. By scanning electron microscope (SEM) and viscoelastic analysis, ASLC12 has a stable mesh structure, good viscoelasticity, and shear resistance, and the mesh structure formed by it is in a dynamic equilibrium state of fracture‐reorganization under shear. We then analyzed the drag reduction, sand carrying, and salt resistance of ASLC12. When the concentration of ASLC12 is 0.09%, the sand‐carrying requirement is satisfied. When the concentration is 0.05%, the drag reduction rate can reach 74.1%, and the resistance reduction rate of ASLC12 in salt ion solution can still reach more than 62%. This shows that the polymer ASLC12 has better sand carrying, drag reduction, and salt resistance.
- 26 July 2024
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 103 (2) , 953-963
Preparation and performance analysis of nano‐crosslinking agent for sulphonated guar gum fracturing fluid
In order to solve the problems of poor temperature resistance and low crosslinking efficiency of crosslinking agent for sulphonated guar gum fracturing fluid, in this paper, nano‐silica was reacted with 3‐aminopropyltriethoxysilane to obtain surface‐modified nano‐silica, which was then reacted with boric acid and n‐butyl titanate to obtain nano‐silica‐based boron‐titanium composite crosslinking agent. Its physical properties and structure were characterized by infrared (IR), laser particle size analysis, X‐ray diffraction (XRD), and atomic force microscopy (AFM). The sulphonated hydroxypropyl guar gum fracturing fluids formed by nano‐crosslinking agent were analyzed: When the temperature was uniformly increased from 25 to 120°C and the shear rate was 170 s−1, the viscosity was finally constant at about 50 mPa · s, which indicated that the temperature and shear resistance were good; the system had a better filtration‐loss reduction performance; the average sedimentation rate of ceramic grains in the fracturing fluid system was 0.00872 cm · min−1, indicating that the system had good sand carrying performance; the damage rate of fracturing fluid filtrate to the core was 23.33%; the gel breaking performance test showed that the fracturing fluid had good gel breaking performance. By analyzing the performance of the fracturing fluid, it can be seen that the nano‐crosslinking agent has the advantages of good temperature resistance and high cross‐linking efficiency compared with the traditional boron and titanium cross‐linking agents.
- 26 July 2024
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 103 (2) , 953-963
Preparation and performance analysis of nano‐crosslinking agent for sulphonated guar gum fracturing fluid
In order to solve the problems of poor temperature resistance and low crosslinking efficiency of crosslinking agent for sulphonated guar gum fracturing fluid, in this paper, nano‐silica was reacted with 3‐aminopropyltriethoxysilane to obtain surface‐modified nano‐silica, which was then reacted with boric acid and n‐butyl titanate to obtain nano‐silica‐based boron‐titanium composite crosslinking agent. Its physical properties and structure were characterized by infrared (IR), laser particle size analysis, X‐ray diffraction (XRD), and atomic force microscopy (AFM). The sulphonated hydroxypropyl guar gum fracturing fluids formed by nano‐crosslinking agent were analyzed: When the temperature was uniformly increased from 25 to 120°C and the shear rate was 170 s−1, the viscosity was finally constant at about 50 mPa · s, which indicated that the temperature and shear resistance were good; the system had a better filtration‐loss reduction performance; the average sedimentation rate of ceramic grains in the fracturing fluid system was 0.00872 cm · min−1, indicating that the system had good sand carrying performance; the damage rate of fracturing fluid filtrate to the core was 23.33%; the gel breaking performance test showed that the fracturing fluid had good gel breaking performance. By analyzing the performance of the fracturing fluid, it can be seen that the nano‐crosslinking agent has the advantages of good temperature resistance and high cross‐linking efficiency compared with the traditional boron and titanium cross‐linking agents.
- 21 March 2023
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 101 (11) , 6296-6304
Preparation of biogum thickener and properties of recoverable fracturing fluid based on environmental protection
A recyclable biogum thickener was developed and employed as the main agent to compound a fracturing fluid system in order to address the issue of the problematic recovery of fracturing fluid system. By using infrared (IR), nuclear magnetic resonance (NMR), X‐ray diffraction (XRD), and scanning electron microscopy (SEM), the physical characteristics and microstructure were examined. By using a rheometer, dynamic filtration loss, and an acid‐etching fracture conductivity device, respectively, the system's temperature and shear resistance, dynamic filtration loss, and fracture conductivity damage were studied. The system's gum‐breaking performance, formation water compatibility, and anti‐expansion performance were then measured in accordance with standards. As a result of shearing at 170 s−1 and 120°C for 2 h, the 4% biogum system's performance outperformed the other two systems in every way, according to the experimental findings. Its viscosity could also exceed 70 mPa · s. After breaking, the solution had a viscosity of 2.5 mPa · s, which was very compatible with the formation water. The system has a 90% anti‐swelling rate, a filtration loss coefficient of 5.14 × 10−5, strong infiltration ability, and negligible formation damage. The biogum system's recovery rate after field application is discovered to be around 50%.
- 21 March 2023
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 101 (11) , 6296-6304
Preparation of biogum thickener and properties of recoverable fracturing fluid based on environmental protection
A recyclable biogum thickener was developed and employed as the main agent to compound a fracturing fluid system in order to address the issue of the problematic recovery of fracturing fluid system. By using infrared (IR), nuclear magnetic resonance (NMR), X‐ray diffraction (XRD), and scanning electron microscopy (SEM), the physical characteristics and microstructure were examined. By using a rheometer, dynamic filtration loss, and an acid‐etching fracture conductivity device, respectively, the system's temperature and shear resistance, dynamic filtration loss, and fracture conductivity damage were studied. The system's gum‐breaking performance, formation water compatibility, and anti‐expansion performance were then measured in accordance with standards. As a result of shearing at 170 s−1 and 120°C for 2 h, the 4% biogum system's performance outperformed the other two systems in every way, according to the experimental findings. Its viscosity could also exceed 70 mPa · s. After breaking, the solution had a viscosity of 2.5 mPa · s, which was very compatible with the formation water. The system has a 90% anti‐swelling rate, a filtration loss coefficient of 5.14 × 10−5, strong infiltration ability, and negligible formation damage. The biogum system's recovery rate after field application is discovered to be around 50%.
- 10 February 2023
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 37 (5) , 3908-3917
Preparation and Performance Analysis of a Dimension-Controlled Nano-Drag-Reducing Agent for Low-Permeability Reservoirs
- 10 February 2023
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 37 (5) , 3908-3917
Preparation and Performance Analysis of a Dimension-Controlled Nano-Drag-Reducing Agent for Low-Permeability Reservoirs
- 14 January 2023
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 140 (11)
Preparation and properties research of a bifunctional hydrophobic associative polymer drag reduction agent for slick water
In this study, the bifunctional hydrophobic associative polymer of Acrylamide/2‐Acrylamido‐2‐Methylpropane Sulfonic Acid/Lauryl Methacrylate/N,N‐dodecyl Acrylamide (AALD12) with better salt resistance and shear resistance was synthesized by free‐radical micelle polymerization for use as a drag reduction in shale slip water fracturing. In deionized water, the critical associative concentration (CAC) of AALD12 was 0.23%. AALD12 was determined to be theoretically usable for a shale reservoir within 240°C based on its TG study. Microstructure, viscoelasticity, and shear recovery tests show that the polymer has good drag reduction potential and shear resistance. The reduction rates of the polymer AALD12 and the drag reduction agent RSH‐1 in clear water were 77% and 73% (RSH‐1 is a commonly used emulsion‐type drag reduction agent in the market). At the same salt concentration (K+ and Ca2+, 50,000 ppm) and flow rate (40 L/min), AALD12 can maintain a maximum reduction rate of about 63%. The drag reduction rate of RSH‐1 in K+ and Ca2+ solutions can only be maintained at about 52% and 28%, respectively. In the shear resistance test, AALD12 and RSH‐1 were each subjected to three times of cyclic shear in the test pipe. The drag reduction rate of the polymer AALD12 solution can still reach more than 72%. The drag reduction rate of the RSH‐1 solution is about 56%. The drag reduction agent has good salt resistance and anti‐shear bifunction.
- 14 January 2023
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 140 (11)
Preparation and properties research of a bifunctional hydrophobic associative polymer drag reduction agent for slick water
In this study, the bifunctional hydrophobic associative polymer of Acrylamide/2‐Acrylamido‐2‐Methylpropane Sulfonic Acid/Lauryl Methacrylate/N,N‐dodecyl Acrylamide (AALD12) with better salt resistance and shear resistance was synthesized by free‐radical micelle polymerization for use as a drag reduction in shale slip water fracturing. In deionized water, the critical associative concentration (CAC) of AALD12 was 0.23%. AALD12 was determined to be theoretically usable for a shale reservoir within 240°C based on its TG study. Microstructure, viscoelasticity, and shear recovery tests show that the polymer has good drag reduction potential and shear resistance. The reduction rates of the polymer AALD12 and the drag reduction agent RSH‐1 in clear water were 77% and 73% (RSH‐1 is a commonly used emulsion‐type drag reduction agent in the market). At the same salt concentration (K+ and Ca2+, 50,000 ppm) and flow rate (40 L/min), AALD12 can maintain a maximum reduction rate of about 63%. The drag reduction rate of RSH‐1 in K+ and Ca2+ solutions can only be maintained at about 52% and 28%, respectively. In the shear resistance test, AALD12 and RSH‐1 were each subjected to three times of cyclic shear in the test pipe. The drag reduction rate of the polymer AALD12 solution can still reach more than 72%. The drag reduction rate of the RSH‐1 solution is about 56%. The drag reduction agent has good salt resistance and anti‐shear bifunction.
- 12 December 2022
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 101 (7) , 4244-4254
Research on the viscosity‐increasing mechanism and performance analysis of modified polysaccharide natural polymer fracturing fluid gel
In this paper, a guar gum‐based hydraulic fracturing fluid suitable for low permeability oil and gas reservoirs was prepared using alkylamine guar gum (J580) as a thickening agent. The viscosification mechanism and comprehensive properties were analyzed to provide theoretical support for improving the fracturing fluid utilization rate and oil and gas field development in Changqing Oilfield. In this experiment, the properties and microstructure of thickener J580 were analyzed by infrared spectroscopy (FT‐IR), nuclear magnetic resonance (1H‐NMR), X‐ray diffraction (XRD), and transmission electron microscope (TEM). The rheometer, dynamic filtration device, and acid erosion fracture conductive ability device were used to study the temperature and shear resistance performance, viscoelastic properties, dynamic filtration performance, and fracture conductive ability damage of the system. the gel breaking performance, formation water compatibility, and anti‐swelling performance of the system were measured according to the standard. The results show that J580 is an amine modified product of guar gum, and its viscosity increasing mechanism is similar to that of guar gum. The breaking time of the system is 375 s, the residue content is 413 mg/L, and the surface tension is 26.49 mN/m. At 90°C, the viscosity of the solution can be maintained at 180 mPa · s, loss modulus G" dominates, the anti‐swelling rate is 82.5%, the damage rate of the conductive ability is 22.40%, and the dynamic filtration coefficient is 1.3 × 10−5 m/s1/2. The fracturing fluid system has good dynamic filtration performance, conductive ability, temperature and shear resistance, good structural strength, can easily break glue and return, and less residue content.
- 12 December 2022
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 101 (7) , 4244-4254
Research on the viscosity‐increasing mechanism and performance analysis of modified polysaccharide natural polymer fracturing fluid gel
In this paper, a guar gum‐based hydraulic fracturing fluid suitable for low permeability oil and gas reservoirs was prepared using alkylamine guar gum (J580) as a thickening agent. The viscosification mechanism and comprehensive properties were analyzed to provide theoretical support for improving the fracturing fluid utilization rate and oil and gas field development in Changqing Oilfield. In this experiment, the properties and microstructure of thickener J580 were analyzed by infrared spectroscopy (FT‐IR), nuclear magnetic resonance (1H‐NMR), X‐ray diffraction (XRD), and transmission electron microscope (TEM). The rheometer, dynamic filtration device, and acid erosion fracture conductive ability device were used to study the temperature and shear resistance performance, viscoelastic properties, dynamic filtration performance, and fracture conductive ability damage of the system. the gel breaking performance, formation water compatibility, and anti‐swelling performance of the system were measured according to the standard. The results show that J580 is an amine modified product of guar gum, and its viscosity increasing mechanism is similar to that of guar gum. The breaking time of the system is 375 s, the residue content is 413 mg/L, and the surface tension is 26.49 mN/m. At 90°C, the viscosity of the solution can be maintained at 180 mPa · s, loss modulus G" dominates, the anti‐swelling rate is 82.5%, the damage rate of the conductive ability is 22.40%, and the dynamic filtration coefficient is 1.3 × 10−5 m/s1/2. The fracturing fluid system has good dynamic filtration performance, conductive ability, temperature and shear resistance, good structural strength, can easily break glue and return, and less residue content.