Hendrik Groß
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hendrik Groß has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Wolfgang Bensch
Institute of Inorganic Chemistry Christian–Albrechts‐University of Kiel Kiel Germany
6 shared publications Lorenz Kienle
Institute of Materials Science, Christian-Albrecht University of Kiel, Kaiserstr. 2, 24143 Kiel, Germany
4 shared publications- Lorenz Kienle
Kiel University
4 shared publications - Michael Poschmann
Institute of Inorganic Chemistry Kiel University Max-Eyth-Str. 2 24118 Kiel Germany
4 shared publications Torben Dankwort
Institute for Materials Science, Kiel University, Kiel, Germany
4 shared publications- Dennis Groeneveld
Laboratory for Gas Sensors IMTEK – Department of Microsystems Engineering University of Freiburg Georges-Koehler-Allee 102 79110 Freiburg Germany
3 shared publications
Latest Publications
- Open Access
- 16 December 2025
- Published by Institute of Archaeology and Ethnology, Polish Academy of Sciences in Sprawozdania Archeologiczne
- Vol. 77 (2) , 355-372
Prehistoric amber item at Žabalj-Nove Zemlje site (Vojvodina, Serbia)
This study focuses on a newly-discovered, perforated pendant from the Žabalj-Nove Zemlje site in Vojvodina, Serbia. The main settlement structure of this multiperiod site is primarily associated with the Late Neolithic Tisza and Vinča cultures (5400-4500/4450 BCE), where two burned houses were excavated from a total of 204 rectangular building anomalies detected archaeomagnetically. A unique, triangular-shaped and perforated pendant appeared on the top of the daub layer of one of the burned houses. The layer was disturbed in several parts by later pits; thus, the pendant cannot be directly linked to a closed Late Neolithic context. Material analysis, including Scanning Electron Microscopy with Energy-Dispersive X-Ray Spectroscopy (SEM-EDX) and Fourier-Transformed Infrared Spectroscopy (FTIR), confirmed the material to be amber, while excluding other likely options such as beeswax or citrine. The Žabalj amber pendant is contextualised within the local scale and in the broader framework of the Carpathian Basin to gain insight into prehistoric amber use, which was predominant during the Bronze Age. However, this pendant does not typologically fit with Bronze Age amber beads; thus, the possibility exists that it dates to the Neolithic.
- 16 December 2025
- Published by Institute of Archaeology and Ethnology, Polish Academy of Sciences in Sprawozdania Archeologiczne
- Vol. 77 (2) , 355-372
Open AccessPrehistoric amber item at Žabalj-Nove Zemlje site (Vojvodina, Serbia)
This study focuses on a newly-discovered, perforated pendant from the Žabalj-Nove Zemlje site in Vojvodina, Serbia. The main settlement structure of this multiperiod site is primarily associated with the Late Neolithic Tisza and Vinča cultures (5400-4500/4450 BCE), where two burned houses were excavated from a total of 204 rectangular building anomalies detected archaeomagnetically. A unique, triangular-shaped and perforated pendant appeared on the top of the daub layer of one of the burned houses. The layer was disturbed in several parts by later pits; thus, the pendant cannot be directly linked to a closed Late Neolithic context. Material analysis, including Scanning Electron Microscopy with Energy-Dispersive X-Ray Spectroscopy (SEM-EDX) and Fourier-Transformed Infrared Spectroscopy (FTIR), confirmed the material to be amber, while excluding other likely options such as beeswax or citrine. The Žabalj amber pendant is contextualised within the local scale and in the broader framework of the Carpathian Basin to gain insight into prehistoric amber use, which was predominant during the Bronze Age. However, this pendant does not typologically fit with Bronze Age amber beads; thus, the possibility exists that it dates to the Neolithic.
- Open Access
- 15 February 2023
- Published by Wiley in Advanced Engineering Materials
- Vol. 25 (9)
About the Impact of Defect Phases on the Thermoelectric Properties of Cr3S4–xSex
Phase relations in Cr3S4 and the substituted system Cr3S4–x Se x are studied to determine the influence of chemical substitutions on the thermoelectric properties. In addition to the expected equilibrium phase crystallizing in the monoclinic space group I2/m, some samples exhibit a defect phase with Cr2S3‐like structure. The defect phase can be observed in a few samples prior to sintering, with the majority being phase‐pure Cr3S4. The defect phase can, however, be introduced in phase‐pure samples through in situ heating. It can be proven that the defect phase has an influence on the thermoelectric properties, by lowering the electrical and thermal conductivity, while increasing the Seebeck coefficient. Substitution in the anion lattice of Cr3S4 with Se lowers the thermal conductivity. The improvement is mainly achieved through a reduction of the electronic contribution to the thermal conductivity, leading to total values as low as 1.6 Wm−1 K−1 for the substituted system in comparison to the pristine material 2.3 Wm−1 K−1.
- 15 February 2023
- Published by Wiley in Advanced Engineering Materials
- Vol. 25 (9)
Open AccessAbout the Impact of Defect Phases on the Thermoelectric Properties of Cr3S4–xSex
Phase relations in Cr3S4 and the substituted system Cr3S4–x Se x are studied to determine the influence of chemical substitutions on the thermoelectric properties. In addition to the expected equilibrium phase crystallizing in the monoclinic space group I2/m, some samples exhibit a defect phase with Cr2S3‐like structure. The defect phase can be observed in a few samples prior to sintering, with the majority being phase‐pure Cr3S4. The defect phase can, however, be introduced in phase‐pure samples through in situ heating. It can be proven that the defect phase has an influence on the thermoelectric properties, by lowering the electrical and thermal conductivity, while increasing the Seebeck coefficient. Substitution in the anion lattice of Cr3S4 with Se lowers the thermal conductivity. The improvement is mainly achieved through a reduction of the electronic contribution to the thermal conductivity, leading to total values as low as 1.6 Wm−1 K−1 for the substituted system in comparison to the pristine material 2.3 Wm−1 K−1.
- Open Access
- 28 April 2022
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 51 (7) , 3510-3520
Does a Low Amount of Substituents Improve the Thermoelectric Properties of Cr2−xMxS3 (M = Ti, V, Sn)?
The effects of low-level partial cation substitution in Cr2−xMxS3 with M = Ti, V or Sn and x = 0.05 and 0.1 have been investigated regarding the long- and short-range crystal structures and thermoelectric properties. All substituted compounds crystallized in the equilibrium phase of Cr2S3, adopting the space group R $${\overline{\text{3}}}$$ . Electron beam irradiation led to a phase transformation from space group R $${\overline{\text{3}}}$$ to P $${\overline{\text{3}}}$$ 1c with a subsequent appearance of diffuse scattering, indicating short-range ordering of cations in the partially occupied cation layers. Substitution of Cr by V led to a reduction in electrical conductivity and subsequently to a lower thermoelectric performance in comparison to the pristine material. In contrast, substitution with Ti yielded an improvement of the performance due to a higher electrical conductivity and a reasonably high Seebeck coefficient. Both Sn-substituted compounds contained only traces of Sn. Surprisingly, a significant improvement of the electrical conductivities could be observed in comparison to the pristine material as well as the other Cr2−xMxS3 materials.- 28 April 2022
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 51 (7) , 3510-3520
Open AccessDoes a Low Amount of Substituents Improve the Thermoelectric Properties of Cr2−xMxS3 (M = Ti, V, Sn)?
The effects of low-level partial cation substitution in Cr2−xMxS3 with M = Ti, V or Sn and x = 0.05 and 0.1 have been investigated regarding the long- and short-range crystal structures and thermoelectric properties. All substituted compounds crystallized in the equilibrium phase of Cr2S3, adopting the space group R $${\overline{\text{3}}}$$ . Electron beam irradiation led to a phase transformation from space group R $${\overline{\text{3}}}$$ to P $${\overline{\text{3}}}$$ 1c with a subsequent appearance of diffuse scattering, indicating short-range ordering of cations in the partially occupied cation layers. Substitution of Cr by V led to a reduction in electrical conductivity and subsequently to a lower thermoelectric performance in comparison to the pristine material. In contrast, substitution with Ti yielded an improvement of the performance due to a higher electrical conductivity and a reasonably high Seebeck coefficient. Both Sn-substituted compounds contained only traces of Sn. Surprisingly, a significant improvement of the electrical conductivities could be observed in comparison to the pristine material as well as the other Cr2−xMxS3 materials. - 24 January 2022
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 14 (7) , 2696-2710
Understanding sodium storage properties of ultra-small Fe3S4 nanoparticles – a combined XRD, PDF, XAS and electrokinetic study
The Na storage mechanism of Fe3S4 nanoparticles is studied via electrochemical techniques, synchrotron-based X-ray diffraction and absorption methods. The results explain the relation of the electrodes cycle life and cut-off potentials.
- 24 January 2022
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 14 (7) , 2696-2710
Understanding sodium storage properties of ultra-small Fe3S4 nanoparticles – a combined XRD, PDF, XAS and electrokinetic study
The Na storage mechanism of Fe3S4 nanoparticles is studied via electrochemical techniques, synchrotron-based X-ray diffraction and absorption methods. The results explain the relation of the electrodes cycle life and cut-off potentials.
- Open Access
- 9 October 2021
- Published by Wiley in Advanced Engineering Materials
- Vol. 24 (3)
Does Low‐Level Substitution Aid in Improving Thermoelectric Properties? A Case Study of M0.1Ni0.9Cr2S4 (M = Mn, In)
The influence of low‐level metal cation substitution in the thermoelectric material NiCr2S4, treated via field‐assisted sintering, is investigated in X‐ray diffraction (XRD) and transmission electron microscopy (TEM) studies. NiCr2S4 and Mn0.1Ni0.9Cr2S4 can be synthesized and compacted as phase‐pure pellets, while In0.1Ni0.9Cr2S4 appears as a mixture of different phases. XRD investigations reveal that Mn can be incorporated into the host material's Ni lattice sites, while In is mainly incorporated into additional phases. Both NiCr2S4 and Mn0.1Ni0.9Cr2S4 form a structure of chemically segregated, nanoscale domains, which appear significantly more pronounced for Mn0.1Ni0.9Cr2S4. All materials exhibit similar, promising thermal conductivities around 2.0 W m−1 K−1, with Seebeck coefficients ranging from −55 to −65 μV K−1. Only the electrical conductivity is noticeably influenced by the substitutions, with the highest value of 504 S cm−1 obtained for the pristine material, and subsequently declining for both substituted phases.
- 9 October 2021
- Published by Wiley in Advanced Engineering Materials
- Vol. 24 (3)
Open AccessDoes Low‐Level Substitution Aid in Improving Thermoelectric Properties? A Case Study of M0.1Ni0.9Cr2S4 (M = Mn, In)
The influence of low‐level metal cation substitution in the thermoelectric material NiCr2S4, treated via field‐assisted sintering, is investigated in X‐ray diffraction (XRD) and transmission electron microscopy (TEM) studies. NiCr2S4 and Mn0.1Ni0.9Cr2S4 can be synthesized and compacted as phase‐pure pellets, while In0.1Ni0.9Cr2S4 appears as a mixture of different phases. XRD investigations reveal that Mn can be incorporated into the host material's Ni lattice sites, while In is mainly incorporated into additional phases. Both NiCr2S4 and Mn0.1Ni0.9Cr2S4 form a structure of chemically segregated, nanoscale domains, which appear significantly more pronounced for Mn0.1Ni0.9Cr2S4. All materials exhibit similar, promising thermal conductivities around 2.0 W m−1 K−1, with Seebeck coefficients ranging from −55 to −65 μV K−1. Only the electrical conductivity is noticeably influenced by the substitutions, with the highest value of 504 S cm−1 obtained for the pristine material, and subsequently declining for both substituted phases.
- Open Access
- 17 July 2020
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 2020 (38) , 3692-3702
CuCo2S4 Deposited on TiO2: Controlling the pH Value Boosts Photocatalytic Hydrogen Evolution
Metallic spinel‐type CuCo2S4 nanoparticles were deposited on nanocrystalline TiO2 (P25®), forming heterostructure nanocomposites. The nanocomposites were characterized in detail by X‐ray powder diffraction (XRD), high‐resolution transmission electron microscopy (HRTEM), nitrogen sorption (BET) and UV/Vis spectroscopy. Variation of the CuCo2S4:TiO2 ratio to an optimum value generated a catalyst which shows a very high photocatalytic H2 production rate at neutral pH of 32.3 µmol/h (0.72 mL h–1), which is much larger than for pure TiO2 (traces of H2). The catalyst exhibits an extraordinary long‐term stability and after 70 h irradiation time about 2 mmol H2 were generated. An increased light absorption and an efficient charge separation for the sample with the optimal CuCo2S4:TiO2 ratio is most probably responsible for the high catalytic activity.
- 17 July 2020
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 2020 (38) , 3692-3702
Open AccessCuCo2S4 Deposited on TiO2: Controlling the pH Value Boosts Photocatalytic Hydrogen Evolution
Metallic spinel‐type CuCo2S4 nanoparticles were deposited on nanocrystalline TiO2 (P25®), forming heterostructure nanocomposites. The nanocomposites were characterized in detail by X‐ray powder diffraction (XRD), high‐resolution transmission electron microscopy (HRTEM), nitrogen sorption (BET) and UV/Vis spectroscopy. Variation of the CuCo2S4:TiO2 ratio to an optimum value generated a catalyst which shows a very high photocatalytic H2 production rate at neutral pH of 32.3 µmol/h (0.72 mL h–1), which is much larger than for pure TiO2 (traces of H2). The catalyst exhibits an extraordinary long‐term stability and after 70 h irradiation time about 2 mmol H2 were generated. An increased light absorption and an efficient charge separation for the sample with the optimal CuCo2S4:TiO2 ratio is most probably responsible for the high catalytic activity.
- 16 October 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 7 (48) , 15188-15196
Purification by SPS and formation of a unique 3D nanoscale network: the showcase of Ni–Cr–S
The occurrence of a unique 3D nanoscale network in Ni–Cr–S, treated via spark-plasma sintering, was discovered with a variety of ex situ and in situ TEM and XRD techniques. The starting material, consisting of a heterogeneous mixture of different phases, could be purified upon application of the sintering process. The obtained samples showed a network of chemically segregated domains being either Ni rich and Cr deficient or vice versa. These domains could be proven to intergrow fully coherently in 3D, thus establishing a unique microstructure. Electron beam irradiation caused the initial Cr3S4-type structures to transform into the disordered NiAs-type. The disordering is characterised by significant short-range ordering as indicated by the appearance of prominent diffuse scattering. Thermoelectric characterisation at room temperature indicated an n-type semiconductor behaviour with thermal and electrical conductivities similar to usual thermoelectric materials, however with a low Seebeck coefficient and a low power factor of 49.3 μW m−1 K−2.
- 16 October 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 7 (48) , 15188-15196
Purification by SPS and formation of a unique 3D nanoscale network: the showcase of Ni–Cr–S
The occurrence of a unique 3D nanoscale network in Ni–Cr–S, treated via spark-plasma sintering, was discovered with a variety of ex situ and in situ TEM and XRD techniques. The starting material, consisting of a heterogeneous mixture of different phases, could be purified upon application of the sintering process. The obtained samples showed a network of chemically segregated domains being either Ni rich and Cr deficient or vice versa. These domains could be proven to intergrow fully coherently in 3D, thus establishing a unique microstructure. Electron beam irradiation caused the initial Cr3S4-type structures to transform into the disordered NiAs-type. The disordering is characterised by significant short-range ordering as indicated by the appearance of prominent diffuse scattering. Thermoelectric characterisation at room temperature indicated an n-type semiconductor behaviour with thermal and electrical conductivities similar to usual thermoelectric materials, however with a low Seebeck coefficient and a low power factor of 49.3 μW m−1 K−2.
- Open Access
- 16 August 2019
- Published by Wiley in Advanced Engineering Materials
- Vol. 21 (11) , 1900430
High‐Pressure Sintering of Rhombohedral Cr2S3 Using Titanium–Zirconium–Molybdenum Tools
The influence of sintering parameters on the physical properties and the chemical structure of rhombohedral Cr2S3 (rh‐Cr2S3) is investigated using high pressures and high temperatures. The densification of the powder is performed by applying the high‐pressure field‐assisted sintering technique/spark plasma sintering. Using a titanium–zirconium–molybdenum (TZM) alloy as sintering tool, it is possible to increase the magnitude of the applied pressure to several hundred MPa at temperatures as high as 1223 K. A relative density of up to 99.9% is achieved at a sintering temperature of 1223 K and a pressure of 395 MPa. The presence of phase‐pure rh‐Cr2S3 is proven by X‐ray diffraction analysis and transmission electron microscopy. The Seebeck coefficients of the self‐doped samples change drastically with the sintering temperatures ranging between −650 and −350 μV K−1. The densities and the thermal conductivities of the sintered samples increase with increasing sintering temperatures. The electrical conductivity is largely increased compared with the thermal conductivity potentially due to the current‐assisted high‐pressure sintering.
- 16 August 2019
- Published by Wiley in Advanced Engineering Materials
- Vol. 21 (11) , 1900430
Open AccessHigh‐Pressure Sintering of Rhombohedral Cr2S3 Using Titanium–Zirconium–Molybdenum Tools
The influence of sintering parameters on the physical properties and the chemical structure of rhombohedral Cr2S3 (rh‐Cr2S3) is investigated using high pressures and high temperatures. The densification of the powder is performed by applying the high‐pressure field‐assisted sintering technique/spark plasma sintering. Using a titanium–zirconium–molybdenum (TZM) alloy as sintering tool, it is possible to increase the magnitude of the applied pressure to several hundred MPa at temperatures as high as 1223 K. A relative density of up to 99.9% is achieved at a sintering temperature of 1223 K and a pressure of 395 MPa. The presence of phase‐pure rh‐Cr2S3 is proven by X‐ray diffraction analysis and transmission electron microscopy. The Seebeck coefficients of the self‐doped samples change drastically with the sintering temperatures ranging between −650 and −350 μV K−1. The densities and the thermal conductivities of the sintered samples increase with increasing sintering temperatures. The electrical conductivity is largely increased compared with the thermal conductivity potentially due to the current‐assisted high‐pressure sintering.
- 24 August 2017
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 5 (36) , 9331-9338
Structural properties of the thermoelectric material CuCrS 2 and of deintercalated Cu x CrS 2 on different length scales: X-ray diffraction, pair distribution function and transmission electron microscopy studies
Structural properties of the thermoelectric materials CuCrS 2 and Cu x CrS 2 on different length scales.
- 24 August 2017
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 5 (36) , 9331-9338
Structural properties of the thermoelectric material CuCrS 2 and of deintercalated Cu x CrS 2 on different length scales: X-ray diffraction, pair distribution function and transmission electron microscopy studies
Structural properties of the thermoelectric materials CuCrS 2 and Cu x CrS 2 on different length scales.