Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Sayem Ul Alam has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comparative Evaluation of Performance Trade-Off Under Permanent Magnet Volume Reduction in SPM, IPM, and PM-Assisted SynRM

    by Sayem Ul Alam, Shuhui Li, Yang-Ki Hong, Zhenghao Liu, Md Imtiaz Kamrul, Seungdeog Choi, Minyeong Choi, Chang-Dong Yeo, Md Abdul Wahed

    Rising costs, supply uncertainty, and geopolitical dependence associated with rare-earth permanent magnets have created an urgent need to reduce permanent magnet (PM) usage in electric machine designs while maintaining high electromagnetic performance. This paper presents a comprehensive comparative investigation of PM reduction strategies for three widely adopted traction machine topologies: Surface Permanent Magnet (SPM), Interior Permanent Magnet (IPM), and Permanent Magnet-Assisted Synchronous Reluctance (PMASynRM) machines. We developed a unified evaluation framework by integrating each machine’s electromagnetic characteristics, electrical operating constraints, and practical inverter limitations across a wide operating speed range. Finite element analysis (FEA) is employed to systematically investigate the effects of progressive PM volume reduction by independently varying magnet width and length while keeping stator geometry, winding configuration, material properties, and operating conditions. We reduced PM dimensions from 100% to 30% of the baseline design to evaluate their impact on torque-speed characteristics, efficiency, and flux-weakening capability. The results reveal that the impact of PM reduction depends strongly on both machine topology and the magnet reduction strategy. Across all machine topologies, reducing magnet width consistently preserves higher torque capability, efficiency, and high-speed operating performance compared with reducing magnet length. Among the machines investigated, the SPM topology exhibits the greatest sensitivity to PM reduction, particularly in the constant-torque region, owing to its complete reliance on permanent magnet excitation. In contrast, the IPM and PMASynRM machines show much greater tolerance to reduced PM volume because the additional contribution of reluctance torque from rotor saliency improves torque retention, extends the constant-power speed range, and reduces efficiency degradation. These findings provide valuable design insights into the trade-offs between permanent magnet utilization and machine performance, offering practical guidelines for minimizing rare-earth material consumption while maintaining competitive traction performance in next-generation electric vehicles and other sustainable electrification applications.


  • Discovered Method for Scalable, Eco‐Friendly, and Low‐Waste Extraction of TiO 2 Nanoparticles From Ilmenite (FeTiO 3 ) #

    by Mun‐Hyoun Park, Yang‐Ki Hong, Sung‐Hoon Gee, Chang‐Dong Yeo, Md Abdul Wahed, Ki‐Suk Lee, Sayem Ul Alam, Shuhui Li

    In this Rapid Communication, we introduce a new method for the first time to extract nanostructured titanium dioxide (TiO 2 ) directly from the mineral ilmenite (FeTiO 3 ). The traditional extraction process typically involves several steps that require specialized equipment, toxic chemicals, and a large manufacturing facility, necessitating a substantial capital investment. Our new glass recrystallization method enables environmentally friendly, cost‐effective production of nanostructured TiO 2 , yielding simpler, less wasteful products and enabling scalable extraction of nanostructured TiO 2 from FeTiO 3 . As a result, well‐dispersed, needle‐shaped rutile TiO 2 nanoparticles measuring 200 nm in length and 40 nm in width are produced. Conversely, oval‐shaped anatase TiO 2 nanoparticles with a length of 50 nm are formed without an annealing step. Both particle types are well dispersed without surface treatment. This innovative process enables easy scaling of nanostructured TiO 2 production.

  • Open Access

    Exploring the Potential of a Newly Discovered Rare-Earth-Free Fe2Ni2N Magnet Versus N35 Magnet in Permanent Magnet Synchronous Motors (PMSMs)

    by Sayem Ui Alam, Shuhui Li, Yang-Ki Hong, Zhenghao Liu, Abdul Wahed, Chang-Dong Yeo, Jung-Kun Lee, Seungdeog Choi, Hayan Shin, Hyunkyung Lee, et al.

    Permanent magnet synchronous machines (PMSMs) are the preferred choice for electric vehicles (EVs), hybrid EVs, and wind turbines because of their high torque density, efficiency, and wide constant-power speed range. Conventional PMSMs rely heavily on rare-earth (RE) permanent magnets like Nd-Fe-B, which offers high remanence and coercivity but comes with high costs, supply chain issues, and environmental concerns. To address these challenges, this paper explores the potential of tetragonal Fe2Ni2N, a newly developed RE-free permanent magnet, as a replacement for commercial Nd-Fe-B (N35) in high-performance PMSMs. Fe2Ni2N shows a remanent flux density of 1.2 T and coercivity of 0.957 MA/m, closely matching those of commercial N35 magnets. Finite element analysis (FEA) in Ansys Maxwell was performed on both surface-mounted (SPM) and interior-mounted (IPM) PMSMs under EV-representative operating conditions. Results demonstrate that Fe2Ni2N-based machines have similar demagnetization resistance, torque, and efficiency to those with N35 magnets, with slight performance advantages at low speeds and nearly identical performance at high speeds. Furthermore, system-level parameters such as DC bus voltage and stator current were analyzed, showing that increased voltage extends the constant torque region while higher current enhances torque output but can slightly reduce efficiency at elevated speeds. These findings confirm that Fe2Ni2N is a promising RE-free alternative to Nd-Fe-B for sustainable, high-performance PMSMs. Results show that Fe2Ni2N-based machines have similar demagnetization resistance, torque, and efficiency to those with N35 magnets, with slight performance benefits at low speeds and nearly identical results at high speeds. Furthermore, system-level parameters, such as DC bus voltage and stator current, were analyzed. The results show that increased voltage extends the constant-torque region, while higher current enhances torque output but can slightly reduce efficiency at elevated speeds. These findings confirm that Fe2Ni2N is a promising RE-free alternative to Nd-Fe-B for sustainable, high-performance PMSMs.


  • Open Access

    Mathematical Modeling and Performance Evaluation of 3D Ferroelectric Negative Capacitance FinFET

    by Sayem Ul Alam, Rukon Uddin, Jahangir Alam, Ahamed Raihan, Sheikh S. Mahtab, Subrata Bhowmik

    Ferroelectric negative capacitance materials have now been proposed for lowering electronics energy dissipation beyond basic limitations. In this paper, we presented the analysis on the performance of negative capacitance (NC) FinFET in comparison with conventional gate dielectrics by using a separation of variables approach, which is an optimal quasi-3D mathematical model. The result has been signified steeper surface potential (ψ), lower threshold voltage (Vth), 1.2mA of on-state current (Ion), and enhanced immunity of negative capacitance FinFET against short channel effects (SCEs) like 35.3mV/V of drain-induced barrier lowering (DIBL), 60mV/dec of subthreshold swing (SS) along with smallest off state current (Ioff) among another conventional gate dielectric. Hence, NC FinFET can be a potential candidate for low power and high-performance device.