Tao Xia
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Tao Xia has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Miao Sun
School of Electrical and Electronic Engineering, Nanyang Technological University, Jurong West, Singapore
6 shared publications Yifan Wu
College of Electrical Information and Engineering, Tongji University, Shanghai, China
6 shared publicationsPatrick Yin Chiang
State Key Laboratory of ASIC and System, Fudan University, Shanghai, China
5 shared publications- Shenglong Zhuo
State Key Laboratory of ASIC and System, Fudan University, Shanghai, China
5 shared publications Yuan Li
PhotonIC Technologies, Shanghai, China
5 shared publicationsXuefeng Chen
PhotonIC Technologies, Shanghai, China
4 shared publications
Latest Publications
- 4 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (5) , 2089-2102
An Adaptive Beam-Steering dToF LiDAR System Using Addressable Multi-Channel VCSEL Transmitter, 128 × 80 SPAD Sensor, and ML-Based Edge-Computing Object Detection
In this work, a solid-state direct time-of-flight (dToF) and adaptive beam-steering Light Detection and Ranging (LiDAR) system is proposed for machine learning (ML) based object detection. To leverage the capabilities of software and hardware, a co-optimization design from a neural network based algorithm to the architecture of transmitter, receiver and optical components is realized. Firstly, an object detection neural network is proposed for the depth-only input algorithm, which indicates the Region of Interest (ROI) in the illuminating field and gives hints of opened scan channels in the next two frames to decrease the total cost of the laser driver and sensor array. Next, the proposed network utilizes the Cross-Stage-Patrial (CSP) block to replace the residual structure in the backbone to achieve a lightweight performance and is implemented on the NVIDIA-Jetson to verify the system-level adaptive beam steering feature. To realize the smart working mode, a customized multi-channel and addressable TX is designed for adaptive and optical control to save power consumption and extend the ranging distance. At the same time, a $128\times 80$ resolution RX which consists of Single-Photon Avalanche Diodes (SPADs) and column-wise Time-to-Digital Converter (TDC) is incorporated to capture the returned photons for combining sub-regions into an entire depth map. Next, to customize the specific scanning mechanism, for the optical setup, a cylindrical lens array is designed to reshape the laser beam, which matches the pattern of the transmitter to illuminate different targeted objects. Both the laser driver chip and the sensor chip with a $128\times 80$ SPAD array are fabricated in the 180-nm Bipolar-CMOS-DMOS (BCD) process. Finally, the laser driver chip realizes the power of 5 W with an adjustable pulse width of 1.5 ns and the SPAD array integrates the depth accuracy of 5 cm at 15 m. Due to that the neural network realizes an accuracy up to 0.8, a low-power solid-state LiDAR prototype with adaptive beam steering is demonstrated.
- 4 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (5) , 2089-2102
An Adaptive Beam-Steering dToF LiDAR System Using Addressable Multi-Channel VCSEL Transmitter, 128 × 80 SPAD Sensor, and ML-Based Edge-Computing Object Detection
In this work, a solid-state direct time-of-flight (dToF) and adaptive beam-steering Light Detection and Ranging (LiDAR) system is proposed for machine learning (ML) based object detection. To leverage the capabilities of software and hardware, a co-optimization design from a neural network based algorithm to the architecture of transmitter, receiver and optical components is realized. Firstly, an object detection neural network is proposed for the depth-only input algorithm, which indicates the Region of Interest (ROI) in the illuminating field and gives hints of opened scan channels in the next two frames to decrease the total cost of the laser driver and sensor array. Next, the proposed network utilizes the Cross-Stage-Patrial (CSP) block to replace the residual structure in the backbone to achieve a lightweight performance and is implemented on the NVIDIA-Jetson to verify the system-level adaptive beam steering feature. To realize the smart working mode, a customized multi-channel and addressable TX is designed for adaptive and optical control to save power consumption and extend the ranging distance. At the same time, a $128\times 80$ resolution RX which consists of Single-Photon Avalanche Diodes (SPADs) and column-wise Time-to-Digital Converter (TDC) is incorporated to capture the returned photons for combining sub-regions into an entire depth map. Next, to customize the specific scanning mechanism, for the optical setup, a cylindrical lens array is designed to reshape the laser beam, which matches the pattern of the transmitter to illuminate different targeted objects. Both the laser driver chip and the sensor chip with a $128\times 80$ SPAD array are fabricated in the 180-nm Bipolar-CMOS-DMOS (BCD) process. Finally, the laser driver chip realizes the power of 5 W with an adjustable pulse width of 1.5 ns and the SPAD array integrates the depth accuracy of 5 cm at 15 m. Due to that the neural network realizes an accuracy up to 0.8, a low-power solid-state LiDAR prototype with adaptive beam steering is demonstrated.
- 4 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (9) , 3379-3389
A Sub-Nanosecond Pulsed VCSEL Driver With PVT-Compensated Constant Current, Integrated Boost Switching Regulator and Class-1 Laser Eye Safety
This article presents a sub-nanoseconds pulsed laser diode (LD) driver IC for multi-junction (MJ-) vertical-cavity surface-emitting laser (VCSEL) arrays. An embedded real-time current control loop keeps the error of laser current amplitude within ±3% for 900 ps~32 ns pulses, even with process, voltage and temperature (PVT) variations of the VCSEL and the driver. With real-time PVT-compensation techniques, the variation of pulsewidth and propagation delay is below 140 ps for different chips under varying supply. A boost switching regulator is integrated into the IC to convert a low supply voltage into the $5\sim 8.5$ -V laser anode supply. A complete set of laser safety check blocks is integrated to guarantee class-1 eye safety, as the driver IC can stop emitting and cutoff the laser supply when a laser safety hazard is detected.
- 4 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (9) , 3379-3389
A Sub-Nanosecond Pulsed VCSEL Driver With PVT-Compensated Constant Current, Integrated Boost Switching Regulator and Class-1 Laser Eye Safety
This article presents a sub-nanoseconds pulsed laser diode (LD) driver IC for multi-junction (MJ-) vertical-cavity surface-emitting laser (VCSEL) arrays. An embedded real-time current control loop keeps the error of laser current amplitude within ±3% for 900 ps~32 ns pulses, even with process, voltage and temperature (PVT) variations of the VCSEL and the driver. With real-time PVT-compensation techniques, the variation of pulsewidth and propagation delay is below 140 ps for different chips under varying supply. A boost switching regulator is integrated into the IC to convert a low supply voltage into the $5\sim 8.5$ -V laser anode supply. A complete set of laser safety check blocks is integrated to guarantee class-1 eye safety, as the driver IC can stop emitting and cutoff the laser supply when a laser safety hazard is detected.
- 21 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 70 (5) , 1704-1708
A 40nm 2TOPS/W Depth-Completion Neural Network Accelerator SoC With Efficient Depth Engine for Realtime LiDAR Systems
Light Detection and Ranging (LiDAR) is becoming a critical requirement for future computer vision applications, such as AR/VR (iPhone-LiDAR) and ADAS (Automotive-LiDAR). A depth point-cloud input has different characteristics than a conventional RGB image input, such that the CNN depthinference implementation is unique when compared with a standard super-resolution CNN(SR-CNN). In this brief, we present a heterogeneous AI-accelerator SoC, which is specific to depth image completion computation. Three key innovations are introduced to improve SoC’s performance. First, to accommodate the unique input data structure of a depth input, a fully-filled dataflow management engine is proposed to pre-process the RGB+Depth input, significantly improving processing element utilization (PEU). Second, to improve the efficiency of the instruction configurations of the CNN accelerator, a hardware-tiling co-processor is proposed that performs the tiling strategy of the CNN accelerator, assigning each sub-job to the PE array directly, therefore reducing the time for task assignments. Third, due to the large number of vector operations required for the postprocess in the neural network, a RISC-V core is incorporated to execute vector computations better. The SoC is implemented in 40nm CMOS process, achieving 2TOPs/W energy efficiency with 34fps throughput under VGA-resolution output for realtime LiDAR systems.
- 21 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 70 (5) , 1704-1708
A 40nm 2TOPS/W Depth-Completion Neural Network Accelerator SoC With Efficient Depth Engine for Realtime LiDAR Systems
Light Detection and Ranging (LiDAR) is becoming a critical requirement for future computer vision applications, such as AR/VR (iPhone-LiDAR) and ADAS (Automotive-LiDAR). A depth point-cloud input has different characteristics than a conventional RGB image input, such that the CNN depthinference implementation is unique when compared with a standard super-resolution CNN(SR-CNN). In this brief, we present a heterogeneous AI-accelerator SoC, which is specific to depth image completion computation. Three key innovations are introduced to improve SoC’s performance. First, to accommodate the unique input data structure of a depth input, a fully-filled dataflow management engine is proposed to pre-process the RGB+Depth input, significantly improving processing element utilization (PEU). Second, to improve the efficiency of the instruction configurations of the CNN accelerator, a hardware-tiling co-processor is proposed that performs the tiling strategy of the CNN accelerator, assigning each sub-job to the PE array directly, therefore reducing the time for task assignments. Third, due to the large number of vector operations required for the postprocess in the neural network, a RISC-V core is incorporated to execute vector computations better. The SoC is implemented in 40nm CMOS process, achieving 2TOPs/W energy efficiency with 34fps throughput under VGA-resolution output for realtime LiDAR systems.
- 14 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 35 (9) , 477-480
All-in-One SPAD Ranging Sensor With Real-Time Xtalk Calibration and Integrated Biasing
This letter presents a novel fully integrated dToF system-on-chip ranging sensor based on a SPADs array. The sensor is made a configurable array of $16\times16$ SPADs, a 940nm VCSEL, a co-design VCSEL driver and embedded DSP core. To suitable different ranging scenarios with high reliability and low cost, the above mentioned are all packaged into one module for ranging. However, the package of coverglass can cause Xtalk, which have a negative impact on ranging. In order to reduce the influence of Xtalk on ranging. This letter proposes a real-time Xtalk calibration circuit system, which can automatically adjust the laser pulse width, when Xtalk and target bins are mixed together. And also to mitigate the effect of SPAD jitter on the Xtalk bins width, an adjustable bias voltage charge pump circuit is adopted to realize the accurate adjustment of pixel SPAD’s bias voltage. The system has been turned out with precision of better than 5mm within 6m in 80% reflectance of target, still with a precision better than 8mm at a distance within 4m in 18% reflectance of target.
- 14 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 35 (9) , 477-480
All-in-One SPAD Ranging Sensor With Real-Time Xtalk Calibration and Integrated Biasing
This letter presents a novel fully integrated dToF system-on-chip ranging sensor based on a SPADs array. The sensor is made a configurable array of $16\times16$ SPADs, a 940nm VCSEL, a co-design VCSEL driver and embedded DSP core. To suitable different ranging scenarios with high reliability and low cost, the above mentioned are all packaged into one module for ranging. However, the package of coverglass can cause Xtalk, which have a negative impact on ranging. In order to reduce the influence of Xtalk on ranging. This letter proposes a real-time Xtalk calibration circuit system, which can automatically adjust the laser pulse width, when Xtalk and target bins are mixed together. And also to mitigate the effect of SPAD jitter on the Xtalk bins width, an adjustable bias voltage charge pump circuit is adopted to realize the accurate adjustment of pixel SPAD’s bias voltage. The system has been turned out with precision of better than 5mm within 6m in 80% reflectance of target, still with a precision better than 8mm at a distance within 4m in 18% reflectance of target.
- 19 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 58 (3) , 757-770
Solid-State dToF LiDAR System Using an Eight-Channel Addressable, 20-W/Ch Transmitter, and a 128 × 128 SPAD Receiver With SNR-Based Pixel Binning and Resolution Upscaling
An entire solid-state direct time-of-flight (dToF) light detection and ranging (LiDAR) system that incorporates innovations for both the transmitter (TX) and the receiver (RX) is presented in this work. For the illumination TX, we demonstrate solid-state channel addressability, which significantly reduces the transmit power and improves the ranging distance by dividing the field of view (FoV) into separately illuminated sub-regions. In the RX, we introduce single-photon avalanche diodes (SPADs) pixel binning, which enables reconfigurability of the sensor’s spatial resolution. Finally, we introduce a machine learning (ML) technique that enables this pixel-binned depth sensor to upscale its spatial resolution after training/inference fusion with the intensity image. The laser diode driver (LDD) chip is implemented in the 180-nm bipolar-CMOS-DMOS (BCD) process and is capable of pumping more than 8-A peak current into a multi-junction vertical-cavity surface-emitting laser (VCSEL) array, producing up to 20.3-W optical pulses under 12.5-V supply voltage. The sensor chip is also implemented in the 180-nm BCD process with a $128 \times 128$ SPAD array and reconfigurable pixel binning. Hardware and software co-optimization under low signal-to-noise ratio (SNR) conditions with ML-based spatial resolution upscaling is demonstrated.
- 19 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 58 (3) , 757-770
Solid-State dToF LiDAR System Using an Eight-Channel Addressable, 20-W/Ch Transmitter, and a 128 × 128 SPAD Receiver With SNR-Based Pixel Binning and Resolution Upscaling
An entire solid-state direct time-of-flight (dToF) light detection and ranging (LiDAR) system that incorporates innovations for both the transmitter (TX) and the receiver (RX) is presented in this work. For the illumination TX, we demonstrate solid-state channel addressability, which significantly reduces the transmit power and improves the ranging distance by dividing the field of view (FoV) into separately illuminated sub-regions. In the RX, we introduce single-photon avalanche diodes (SPADs) pixel binning, which enables reconfigurability of the sensor’s spatial resolution. Finally, we introduce a machine learning (ML) technique that enables this pixel-binned depth sensor to upscale its spatial resolution after training/inference fusion with the intensity image. The laser diode driver (LDD) chip is implemented in the 180-nm bipolar-CMOS-DMOS (BCD) process and is capable of pumping more than 8-A peak current into a multi-junction vertical-cavity surface-emitting laser (VCSEL) array, producing up to 20.3-W optical pulses under 12.5-V supply voltage. The sensor chip is also implemented in the 180-nm BCD process with a $128 \times 128$ SPAD array and reconfigurable pixel binning. Hardware and software co-optimization under low signal-to-noise ratio (SNR) conditions with ML-based spatial resolution upscaling is demonstrated.
- 21 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 70 (2) , 396-400
A 200 MHz 14 W Pulsed Optical Illuminator With Laser Driver ASIC and On-Chip DLL-Based Time Interpolator for Indirect Time-of-Flight Applications
The applications requiring three-dimensional information have been growing rapidly, including facial recognition, gesture recognition, auto-focus for 2D camera, self-driving autonomous vehicles, etc. Indirect Time-of-Flight (iToF) technique has been adopted widely for 3D depth imaging due to its high spatial resolution and excellent depth accuracy performance. In this paper, a 200 MHz pulsed optical Illuminator for iToF applications is reported. A 940 nm GaAs-based triple-junction VCSEL array is adopted and an integrated pulsed VCSEL driver ASIC in 180 nm BCD process is realized. Optical pulses with peak power up to 14 W can be transmitted by the laser illuminator with a maximum driving current of 6.5 A by the driver ASIC. The modulation frequency can be up to 200 MHz. Automatic optical power control (AOPC) is realized for stable optical power output and laser eye safety protection. An on-chip DLL-based time interpolator is proposed to eliminate the mechanical moving components used during system calibration. The measured absolute accuracy of the time interpolator is +/-50 ps with a resolution of 800 ps and tuning range of 49.6 ns. This work effectively extends the measurement distance of the iToF system. The calibration efficiency is also improved with the proposed method.
- 21 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 70 (2) , 396-400
A 200 MHz 14 W Pulsed Optical Illuminator With Laser Driver ASIC and On-Chip DLL-Based Time Interpolator for Indirect Time-of-Flight Applications
The applications requiring three-dimensional information have been growing rapidly, including facial recognition, gesture recognition, auto-focus for 2D camera, self-driving autonomous vehicles, etc. Indirect Time-of-Flight (iToF) technique has been adopted widely for 3D depth imaging due to its high spatial resolution and excellent depth accuracy performance. In this paper, a 200 MHz pulsed optical Illuminator for iToF applications is reported. A 940 nm GaAs-based triple-junction VCSEL array is adopted and an integrated pulsed VCSEL driver ASIC in 180 nm BCD process is realized. Optical pulses with peak power up to 14 W can be transmitted by the laser illuminator with a maximum driving current of 6.5 A by the driver ASIC. The modulation frequency can be up to 200 MHz. Automatic optical power control (AOPC) is realized for stable optical power output and laser eye safety protection. An on-chip DLL-based time interpolator is proposed to eliminate the mechanical moving components used during system calibration. The measured absolute accuracy of the time interpolator is +/-50 ps with a resolution of 800 ps and tuning range of 49.6 ns. This work effectively extends the measurement distance of the iToF system. The calibration efficiency is also improved with the proposed method.
- 27 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 69 (11) , 4193-4197
An 8-A Sub-1ns Pulsed VCSEL Driver IC With Built-In Pulse Monitor and Automatic Peak Current Control for Direct Time-of-Flight Applications
An integrated laser diode driver for multi-junction vertical-cavity surface-emitting laser (VCSEL) arrays is presented in this brief. The driver chip, fabricated in 180nm bipolar-CMOS-DMOS (BCD) process, working under 12V supply, can pump more than 8A peak current into a triple-junction VCSEL array, producing up to 20.3W optical pulses. Measured optical pulses have tunable widths from 276ps to 2352ps with 120ps/160ps rise/fall time. When emitting 10MHz-frequency 960ps-width optical pulses with peak power ranging from 3.6W to 17.5W, the driver-VCSEL system has over 20% electrical-to-optical power conversion efficiency. The driver can record its output current waveform with a built-in pulse monitor. The peak data from the recorded waveform is used for automatic peak current control.
- 27 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 69 (11) , 4193-4197
An 8-A Sub-1ns Pulsed VCSEL Driver IC With Built-In Pulse Monitor and Automatic Peak Current Control for Direct Time-of-Flight Applications
An integrated laser diode driver for multi-junction vertical-cavity surface-emitting laser (VCSEL) arrays is presented in this brief. The driver chip, fabricated in 180nm bipolar-CMOS-DMOS (BCD) process, working under 12V supply, can pump more than 8A peak current into a triple-junction VCSEL array, producing up to 20.3W optical pulses. Measured optical pulses have tunable widths from 276ps to 2352ps with 120ps/160ps rise/fall time. When emitting 10MHz-frequency 960ps-width optical pulses with peak power ranging from 3.6W to 17.5W, the driver-VCSEL system has over 20% electrical-to-optical power conversion efficiency. The driver can record its output current waveform with a built-in pulse monitor. The peak data from the recorded waveform is used for automatic peak current control.
- 1 September 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Power system islanding detection based on wide area measurement systems
A fast islanding detection tool can help power dispatchers monitor and control power system operations. Frequency monitoring network (FNET) is a low cost and quickly deployable wide-area phasor measurement system at the distribution level. The frequency disturbance recorder (FDR) in FNET is actually a single-phase phasor measurement unit (PMU) in the sense that it measures the voltage phase angle, amplitude, and frequency from a single-phase voltage source. Based on the data collected by the FDRs deployed in the North American power grid, two islanding detection methods, the frequency difference method and the change of angle difference method, are proposed. The six cases, including islanding cases, a generation trip case and a load shedding case, are presented to verify the proposed methods of islanding detection. The results show that the proposed methods can correctly detect power system islanding, and will not be falsely triggered by generation trips and load shedding.
- 1 September 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Power system islanding detection based on wide area measurement systems
A fast islanding detection tool can help power dispatchers monitor and control power system operations. Frequency monitoring network (FNET) is a low cost and quickly deployable wide-area phasor measurement system at the distribution level. The frequency disturbance recorder (FDR) in FNET is actually a single-phase phasor measurement unit (PMU) in the sense that it measures the voltage phase angle, amplitude, and frequency from a single-phase voltage source. Based on the data collected by the FDRs deployed in the North American power grid, two islanding detection methods, the frequency difference method and the change of angle difference method, are proposed. The six cases, including islanding cases, a generation trip case and a load shedding case, are presented to verify the proposed methods of islanding detection. The results show that the proposed methods can correctly detect power system islanding, and will not be falsely triggered by generation trips and load shedding.
- 1 July 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19325517,p. 1-7
Dynamic performance test of single-phase phasor measurement units
Wide area measurements are becoming the norm of power system monitoring, protection and control. Frequency monitoring network (FNET) is a low-cost, easily deployable system at 120V distribution level. The frequency disturbance recorder (FDR) is actually a single-phase phasor measurement unit (PMU) in the sense that it measures the voltage phase angle, amplitude, and frequency from a single-phase voltage source. This paper discussed a calibrating and dynamic testing procedure developed for assuring the quality and accuracy of FDRs. Voltage magnitude and angle are calibrated, and two types of dynamic performance test, step and ramp, are performed for verifying the dynamic performance of FDRs. A detailed FDR calibrating and testing case is given. The test results demonstrate that the quality and accuracy of FDRs can satisfy the requirement of wide area measurement system.
- 1 July 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19325517,p. 1-7
Dynamic performance test of single-phase phasor measurement units
Wide area measurements are becoming the norm of power system monitoring, protection and control. Frequency monitoring network (FNET) is a low-cost, easily deployable system at 120V distribution level. The frequency disturbance recorder (FDR) is actually a single-phase phasor measurement unit (PMU) in the sense that it measures the voltage phase angle, amplitude, and frequency from a single-phase voltage source. This paper discussed a calibrating and dynamic testing procedure developed for assuring the quality and accuracy of FDRs. Voltage magnitude and angle are calibrated, and two types of dynamic performance test, step and ramp, are performed for verifying the dynamic performance of FDRs. A detailed FDR calibrating and testing case is given. The test results demonstrate that the quality and accuracy of FDRs can satisfy the requirement of wide area measurement system.