Xiu-Bo Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiu-Bo Liu has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
Jin-Peng Zhu
4 shared publicationsDong-Sheng Wang
2 shared publicationsFei-Zhi Zhang
2 shared publicationsHai-Bin Zhou
2 shared publicationsHong-Liang Zhao
2 shared publications- Jing Peng
State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, China
2 shared publications
Latest Publications
- Open Access
Multi-Layer Biocarbon Carbonized from Cellulose Nanocrystals as a Novel Lubricant Nanoadditive in Rapeseed Oil
It is limited to use cellulose nanocrystals (CNCs) as green lubricant nanoadditives due to their high biodegradability. A promising solution is to convert CNCs into biocarbon. Herein, a multi-layer biocarbon (MLC) was prepared by carbonizing CNCs with an ionic liquids–thermal method. MLC was characterized comprehensively and then dispersed into rapeseed oil for use as a nanoadditive. The tribological performance of the MLC nanoadditive was evaluated using a ball-on-disc tribometer. The lubrication mechanism of the MLC nanoadditive was elucidated according to wear analysis of the worn surfaces and wear residues. It was found that MLC had a high carbon content of 77 at% and showed a two-dimensional multi-layered morphology. Each layer was composed of amorphous carbon nanosheets embedded with many crystalline carbon dots. The MLC nanoadditive was of excellent dispersibility and stability in rapeseed oil. Tribological experiments showed that the MLC nanoadditive, with a concentration of merely 0.04 wt%, led to a decrease in the frictional coefficient by 12.4% and the wear volume by 50.7%, having higher efficacy than the CNC nanoadditive. The exceptional lubrication effect of the MLC nanoadditive was mainly attributable to its interfacial deposition behavior and its subsequent fragmenting behavior. This work develops a novel method for biocarbon preparation and showcases its significant potential in lubrication applications.
Open AccessMulti-Layer Biocarbon Carbonized from Cellulose Nanocrystals as a Novel Lubricant Nanoadditive in Rapeseed Oil
It is limited to use cellulose nanocrystals (CNCs) as green lubricant nanoadditives due to their high biodegradability. A promising solution is to convert CNCs into biocarbon. Herein, a multi-layer biocarbon (MLC) was prepared by carbonizing CNCs with an ionic liquids–thermal method. MLC was characterized comprehensively and then dispersed into rapeseed oil for use as a nanoadditive. The tribological performance of the MLC nanoadditive was evaluated using a ball-on-disc tribometer. The lubrication mechanism of the MLC nanoadditive was elucidated according to wear analysis of the worn surfaces and wear residues. It was found that MLC had a high carbon content of 77 at% and showed a two-dimensional multi-layered morphology. Each layer was composed of amorphous carbon nanosheets embedded with many crystalline carbon dots. The MLC nanoadditive was of excellent dispersibility and stability in rapeseed oil. Tribological experiments showed that the MLC nanoadditive, with a concentration of merely 0.04 wt%, led to a decrease in the frictional coefficient by 12.4% and the wear volume by 50.7%, having higher efficacy than the CNC nanoadditive. The exceptional lubrication effect of the MLC nanoadditive was mainly attributable to its interfacial deposition behavior and its subsequent fragmenting behavior. This work develops a novel method for biocarbon preparation and showcases its significant potential in lubrication applications.
- Top Cited Papers
Elevated-temperature tribological performance of CrNiCuTiNb/h-BN high-entropy alloy coatings via laser cladding
- 15 April 2025
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (21) , 25799-25809
Effect of B and Nano-TiC on the Tribological Properties of High-Entropy Alloy FeCoCrNiCu Coatings
- 15 April 2025
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (21) , 25799-25809
Effect of B and Nano-TiC on the Tribological Properties of High-Entropy Alloy FeCoCrNiCu Coatings
- 18 February 2025
- Published by Elsevier in Materials Letters
- Vol. 387
Atomic-scale insight into the effect of graphene on the tribological behavior of high-entropy alloys
- 18 February 2025
- Published by Elsevier in Materials Letters
- Vol. 387
Atomic-scale insight into the effect of graphene on the tribological behavior of high-entropy alloys
- 1 January 2025
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 61 (13) , 192-212
Review of Tribology and Lubrication for Silicon Carbide Ceramic
- 1 January 2025
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 61 (13) , 192-212
Review of Tribology and Lubrication for Silicon Carbide Ceramic
- Open Access
Unraveling the Subsurface Damage and Material Removal Mechanism of Multi-Principal-Element Alloy FeCrNi Coatings During the Scratching Process
Multi-principal-element alloys (MPEAs) exhibit superior strength and good ductility. However, tribological properties of FeCrNi MPEAs remain unknown at nanoscale and complex environments. Here, we investigate the effects of scratching speed, depth, and temperature on microstructural and tribological characteristics of FeCrNi using molecular dynamics simulations combined with an elevated temperature tribological experiment. The scratching force experiences the increase stage, the undulated stage, and the stable stage due to chip formation. Compared to traditional alloy coatings, low force enhances the useful life. With increased speed, the friction coefficient decreases, agreeing with previous work. High speed impacting includes severe local plastic deformation, from dislocation to amorphization. As the scratching depth increases, the average scratch force and friction coefficient increases owing to material accumulation in front of the abrasive particles. The surface morphology and dislocation behavior are significantly different during the scratching process. In addition, we revealed a temperature-dependent friction mechanism. FeCrNi MPEAs have excellent wear resistance at an intermediate temperature, which is attributed to the high Cr content promoting the formation of the compact oxide layer. This work provides atomic-scale mechanistic insights into the tribological behavior of FeCrNi, and would be applied to the design of MPEAs with high performance.
Open AccessUnraveling the Subsurface Damage and Material Removal Mechanism of Multi-Principal-Element Alloy FeCrNi Coatings During the Scratching Process
Multi-principal-element alloys (MPEAs) exhibit superior strength and good ductility. However, tribological properties of FeCrNi MPEAs remain unknown at nanoscale and complex environments. Here, we investigate the effects of scratching speed, depth, and temperature on microstructural and tribological characteristics of FeCrNi using molecular dynamics simulations combined with an elevated temperature tribological experiment. The scratching force experiences the increase stage, the undulated stage, and the stable stage due to chip formation. Compared to traditional alloy coatings, low force enhances the useful life. With increased speed, the friction coefficient decreases, agreeing with previous work. High speed impacting includes severe local plastic deformation, from dislocation to amorphization. As the scratching depth increases, the average scratch force and friction coefficient increases owing to material accumulation in front of the abrasive particles. The surface morphology and dislocation behavior are significantly different during the scratching process. In addition, we revealed a temperature-dependent friction mechanism. FeCrNi MPEAs have excellent wear resistance at an intermediate temperature, which is attributed to the high Cr content promoting the formation of the compact oxide layer. This work provides atomic-scale mechanistic insights into the tribological behavior of FeCrNi, and would be applied to the design of MPEAs with high performance.
- Open Access
Uncovering Nanoindention Behavior of Amorphous/Crystalline High-Entropy-Alloy Composites
Amorphous/crystalline high-entropy-alloy (HEA) composites show great promise as structural materials due to their exceptional mechanical properties. However, there is still a lack of understanding of the dynamic nanoindentation response of HEA composites at the atomic scale. Here, the mechanical behavior of amorphous/crystalline HEA composites under nanoindentation is investigated through a large-scale molecular dynamics simulation and a dislocation-based strength model, in terms of the indentation force, microstructural evolution, stress distribution, shear strain distribution, and surface topography. The results show that the uneven distribution of elements within the crystal leads to a strong heterogeneity of the surface tension during elastic deformation. The severe mismatch of the amorphous/crystalline interface combined with the rapid accumulation of elastic deformation energy causes a significant number of dislocation-based plastic deformation behaviors. The presence of surrounding dislocations inhibits the free slip of dislocations below the indenter, while the amorphous layer prevents the movement or disappearance of dislocations towards the substrate. A thin amorphous layer leads to great indentation force, and causes inconsistent stacking and movement patterns of surface atoms, resulting in local bulges and depressions at the macroscopic level. The increasing thickness of the amorphous layer hinders the extension of shear bands towards the lower part of the substrate. These findings shed light on the mechanical properties of amorphous/crystalline HEA composites and offer insights for the design of high-performance materials.
Open AccessUncovering Nanoindention Behavior of Amorphous/Crystalline High-Entropy-Alloy Composites
Amorphous/crystalline high-entropy-alloy (HEA) composites show great promise as structural materials due to their exceptional mechanical properties. However, there is still a lack of understanding of the dynamic nanoindentation response of HEA composites at the atomic scale. Here, the mechanical behavior of amorphous/crystalline HEA composites under nanoindentation is investigated through a large-scale molecular dynamics simulation and a dislocation-based strength model, in terms of the indentation force, microstructural evolution, stress distribution, shear strain distribution, and surface topography. The results show that the uneven distribution of elements within the crystal leads to a strong heterogeneity of the surface tension during elastic deformation. The severe mismatch of the amorphous/crystalline interface combined with the rapid accumulation of elastic deformation energy causes a significant number of dislocation-based plastic deformation behaviors. The presence of surrounding dislocations inhibits the free slip of dislocations below the indenter, while the amorphous layer prevents the movement or disappearance of dislocations towards the substrate. A thin amorphous layer leads to great indentation force, and causes inconsistent stacking and movement patterns of surface atoms, resulting in local bulges and depressions at the macroscopic level. The increasing thickness of the amorphous layer hinders the extension of shear bands towards the lower part of the substrate. These findings shed light on the mechanical properties of amorphous/crystalline HEA composites and offer insights for the design of high-performance materials.
- Open Access
Creep Performance and Life Prediction of Bamboo Scrimber under Long-Term Tension in Parallel-to-Grain
Creep performance is a crucial factor that must be considered in structural design. This paper aims to investigate the creep failure mode, creep strain, creep compliance, and other creep properties of bamboo scrimber under long-term tension in parallel-to-grain. To establish a general creep life prediction method for the full stress level of the bamboo scrimber, a multi-branch Kelvin–Voigt model, a generalized Maxwell model, and a creep finite element simulation were employed. The results showed that the creep strain curve of bamboo scrimber included the unsteady creep stage and the stable creep stage, but not the accelerated creep stage. When the stress ratio was less than 0.3, the residual strength decreased gradually. Below 70% of the ultimate load capacity, the creep characteristics of the bamboo scrimber were linear viscoelastic, and the creep compliance was generally independent of the load level. The creep finite element model of bamboo scrimber could accurately calculate the creep deformation of specimens. Based on this creep finite element model and creep failure rules, a life prediction model for the full stress level of bamboo scrimber was established, which could accurately predict the creep life. This paper provides theoretical guidance for the creep design of bamboo scrimber in engineering structures.
Open AccessCreep Performance and Life Prediction of Bamboo Scrimber under Long-Term Tension in Parallel-to-Grain
Creep performance is a crucial factor that must be considered in structural design. This paper aims to investigate the creep failure mode, creep strain, creep compliance, and other creep properties of bamboo scrimber under long-term tension in parallel-to-grain. To establish a general creep life prediction method for the full stress level of the bamboo scrimber, a multi-branch Kelvin–Voigt model, a generalized Maxwell model, and a creep finite element simulation were employed. The results showed that the creep strain curve of bamboo scrimber included the unsteady creep stage and the stable creep stage, but not the accelerated creep stage. When the stress ratio was less than 0.3, the residual strength decreased gradually. Below 70% of the ultimate load capacity, the creep characteristics of the bamboo scrimber were linear viscoelastic, and the creep compliance was generally independent of the load level. The creep finite element model of bamboo scrimber could accurately calculate the creep deformation of specimens. Based on this creep finite element model and creep failure rules, a life prediction model for the full stress level of bamboo scrimber was established, which could accurately predict the creep life. This paper provides theoretical guidance for the creep design of bamboo scrimber in engineering structures.