Ting Yu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ting Yu has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Fangfang Zhang
Zhejiang Academy of Special Equipment Science, Hangzhou, China
3 shared publications Bin Du
Zhejiang Academy of Special Equipment Science, Hangzhou, China
1 shared publicationChengcheng Yu
Meirui Curtain Wall Doors and Windows Co. Ltd, Hefei 230000, China
1 shared publication- Dong Wang
College of Mechanical Engineering, Zhijiang College of Zhejiang University of Technology, Shaoxing, China
1 shared publication Fangfang Zhang
Zhejiang Academy of Special Equipment Science, Hangzhou 310000, China
1 shared publication- Hongbin Xie
Zhejiang Academy of Special Equipment Science, Hangzhou, People’s Republic of China
1 shared publication
Latest Publications
- 18 July 2026
- Published by Springer Nature in Journal of Failure Analysis and Prevention
- Vol. 26 (4) , 2374-2391
Failure Analysis of Stress-Oriented Hydrogen-Induced Cracking of 20# Steel Welded Joints in Acrylonitrile-Containing Medium Environment
- 18 July 2026
- Published by Springer Nature in Journal of Failure Analysis and Prevention
- Vol. 26 (4) , 2374-2391
Failure Analysis of Stress-Oriented Hydrogen-Induced Cracking of 20# Steel Welded Joints in Acrylonitrile-Containing Medium Environment
- 6 October 2025
- Published by Springer Nature in Journal of Failure Analysis and Prevention
- Vol. 25 (5) , 2512-2533
Multi-Factor Coupled Fatigue Fracture Mechanism and Failure Analysis of a 45 Steel Blower Shaft Under Variable-Frequency Operation
- 6 October 2025
- Published by Springer Nature in Journal of Failure Analysis and Prevention
- Vol. 25 (5) , 2512-2533
Multi-Factor Coupled Fatigue Fracture Mechanism and Failure Analysis of a 45 Steel Blower Shaft Under Variable-Frequency Operation
- 14 January 2025
- Published by Springer Nature in Metallography, Microstructure, and Analysis
- Vol. 14 (1) , 68-80
Microstructure Analysis of Fatigue Cracks on the Flue Gas Side of Water-Cooled Wall Coils of the HT-L Furnace
- 14 January 2025
- Published by Springer Nature in Metallography, Microstructure, and Analysis
- Vol. 14 (1) , 68-80
Microstructure Analysis of Fatigue Cracks on the Flue Gas Side of Water-Cooled Wall Coils of the HT-L Furnace
- Open Access
- 17 October 2024
- Published by IOS Press
- p. 381-386
Failure Analysis of Cracking at the Edge of T-Weld Between Boiler Cylinder and Tube Plate
A company had a WNS10 boiler operating for 16 months when it experienced a catastrophic failure. The failure occurred at the edge of the T-weld between the shell cylinder and the rear tube plate at the rear of the furnace, and the weld cracked on the cylinder side. At the same time, the outer guard plate cracked due to the impact of airflow. We used macroscopic observation, physical analysis, metallographic analysis, and scanning electron microscope analysis to study the cause of the cracks. It was found that the fracture was mainly characterized by brittle fracture. The physical phase analysis found that the Ca and Si contents in the boiler water were high, and there was scaling at the failure site and severe corrosion under the scale. Finally, it was concluded that the boiler has apparent oxygen corrosion, subscale corrosion, and stress corrosion. Oxygen corrosion and corrosion under the role of scale corrosion in the boiler tube localized pits, pits tip part of the corrosion products due to the corrosion of the wedge caused by the addition of tensile stress and the emergence of micro-cracks. After the formation of micro-cracks in the boiler operating pressure, welding, and manufacturing process of residual stress and corrosive media under the joint action, cracks gradually expand, eventually leading to cracking.
- 17 October 2024
- Published by IOS Press
- p. 381-386
Open AccessFailure Analysis of Cracking at the Edge of T-Weld Between Boiler Cylinder and Tube Plate
A company had a WNS10 boiler operating for 16 months when it experienced a catastrophic failure. The failure occurred at the edge of the T-weld between the shell cylinder and the rear tube plate at the rear of the furnace, and the weld cracked on the cylinder side. At the same time, the outer guard plate cracked due to the impact of airflow. We used macroscopic observation, physical analysis, metallographic analysis, and scanning electron microscope analysis to study the cause of the cracks. It was found that the fracture was mainly characterized by brittle fracture. The physical phase analysis found that the Ca and Si contents in the boiler water were high, and there was scaling at the failure site and severe corrosion under the scale. Finally, it was concluded that the boiler has apparent oxygen corrosion, subscale corrosion, and stress corrosion. Oxygen corrosion and corrosion under the role of scale corrosion in the boiler tube localized pits, pits tip part of the corrosion products due to the corrosion of the wedge caused by the addition of tensile stress and the emergence of micro-cracks. After the formation of micro-cracks in the boiler operating pressure, welding, and manufacturing process of residual stress and corrosive media under the joint action, cracks gradually expand, eventually leading to cracking.
- 3 October 2024
- Published by Springer Nature in Metallography, Microstructure, and Analysis
- Vol. 13 (6) , 1131-1139
Microstructure Characteristics of Fatigue Fracture of Furnace Tube in Convection Section of Slurry Bed Fractionator
- 3 October 2024
- Published by Springer Nature in Metallography, Microstructure, and Analysis
- Vol. 13 (6) , 1131-1139
Microstructure Characteristics of Fatigue Fracture of Furnace Tube in Convection Section of Slurry Bed Fractionator