Tsung-Tsong Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tsung-Tsong Wu has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
C.-D. Tsai
Institute of Applied Mechanics, College of Engineering, National Taiwan University, Taipei 106, Taiwan
1 shared publication- Chih-Ming Lin
University of California 1 Department of Mechanical Engineering Berkeley, California 94720, USA
1 shared publication J.-H Sun
Institute of Applied Mechanics, National Taiwan University, Taipei, Taiwan, ROC
1 shared publicationJ.-H Tong
Institute of Applied Mechanics, National Taiwan University, Taipei, Taiwan, ROC
1 shared publicationY.-H. Liu
Institute of Applied Mechanics, College of Engineering, National Taiwan University, Taipei 106, Taiwan
1 shared publicationYung-Yu Chen
1 shared publication
Latest Publications
- 1 November 2004
- Published by Taylor & Francis in Journal of the Chinese Institute of Engineers
- Vol. 27 (7) , 973-979
Analysis of SFIT saw filters using coupling of modes model
This paper presents a study on using the coupling‐of‐model (COM) model to analyze wide‐band SAW filters with slanted finger interdigital transducers (SFIT). In contrast to other design methods, the COM model is more convenient and more simple to use for designing different types of electrodes by just changing the elements of a P‐matrix. In this paper, we give a complete description of how to use the COM approach to analyze SFIT SAW filters and show a comparison of simulated and experimental frequency responses of the SFIT SAW filter. Two SFIT SAW filters with 30% bandwidth, 60 MHz center frequency, and different numbers of SFIT pairs were designed. On the experimental side, SFIT SAW filters using YZ‐LiNbO3 as the substrate material were fabricated and the on‐wafer frequency responses were measured. Comparisons made between the simulated and measured frequency responses showed good agreement.
- 1 November 2004
- Published by Taylor & Francis in Journal of the Chinese Institute of Engineers
- Vol. 27 (7) , 973-979
Analysis of SFIT saw filters using coupling of modes model
This paper presents a study on using the coupling‐of‐model (COM) model to analyze wide‐band SAW filters with slanted finger interdigital transducers (SFIT). In contrast to other design methods, the COM model is more convenient and more simple to use for designing different types of electrodes by just changing the elements of a P‐matrix. In this paper, we give a complete description of how to use the COM approach to analyze SFIT SAW filters and show a comparison of simulated and experimental frequency responses of the SFIT SAW filter. Two SFIT SAW filters with 30% bandwidth, 60 MHz center frequency, and different numbers of SFIT pairs were designed. On the experimental side, SFIT SAW filters using YZ‐LiNbO3 as the substrate material were fabricated and the on‐wafer frequency responses were measured. Comparisons made between the simulated and measured frequency responses showed good agreement.
- 7 August 2002
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
- Vol. 49 (1) , 142-149
Exact analysis of dispersive SAW devices on ZnO/diamond/Si-layered structures
In this paper, a formulation for calculating the effective permittivity of a piezoelectric layered SAW structure is given, and the exact frequency response of ZnO/diamond/Si-layered SAW is calculated. The effective permittivity and phase velocity dispersion of a ZnO/diamond/Si-layered half space are calculated and discussed. The frequency response of an unapodized SAW transducer is calculated, and the center frequency shift caused by the velocity dispersion is explained. In addition, the electromechanical coupling coefficients of the ZnO/diamond/Si-layered half space based on two different formulas are calculated and discussed. Finally, based on the results of the study, we propose an exact analysis for modeling the layered SAW device. The advantage of using the effective permittivity method is that, not only the null frequency bandwidth, but also the center frequency shift and insertion loss can be evaluated.
- 7 August 2002
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
- Vol. 49 (1) , 142-149
Exact analysis of dispersive SAW devices on ZnO/diamond/Si-layered structures
In this paper, a formulation for calculating the effective permittivity of a piezoelectric layered SAW structure is given, and the exact frequency response of ZnO/diamond/Si-layered SAW is calculated. The effective permittivity and phase velocity dispersion of a ZnO/diamond/Si-layered half space are calculated and discussed. The frequency response of an unapodized SAW transducer is calculated, and the center frequency shift caused by the velocity dispersion is explained. In addition, the electromechanical coupling coefficients of the ZnO/diamond/Si-layered half space based on two different formulas are calculated and discussed. Finally, based on the results of the study, we propose an exact analysis for modeling the layered SAW device. The advantage of using the effective permittivity method is that, not only the null frequency bandwidth, but also the center frequency shift and insertion loss can be evaluated.
- 1 December 2001
- Published by Elsevier in NDT & E International
- Vol. 34 (8) , 537-546
Application of neural networks to laser ultrasonic NDE of bonded structures
- 1 December 2001
- Published by Elsevier in NDT & E International
- Vol. 34 (8) , 537-546
Application of neural networks to laser ultrasonic NDE of bonded structures
- 1 September 2000
- Published by Elsevier in NDT & E International
- Vol. 33 (6) , 401-407
On the study of elastic wave scattering and Rayleigh wave velocity measurement of concrete with steel bar
- 1 September 2000
- Published by Elsevier in NDT & E International
- Vol. 33 (6) , 401-407
On the study of elastic wave scattering and Rayleigh wave velocity measurement of concrete with steel bar