Qi Xiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qi Xiao has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
Suping Huang
State Key Lab of Powder Metallurgy, Central South University, Changsha, China
12 shared publicationsHongfei Kang
School of Minerals Processing and Bioengineering, Central South University, Changsha, China
4 shared publicationsKun Wang
4 shared publicationsNeng Li
School of Minerals Processing and Bioengineering, Central South University, Changsha 410083, China
4 shared publications- Suping Huang
State Key Lab of Powder Metallurgy, Central South University, Changsha, China
4 shared publications Bihui Qin
School of Minerals Processing and Bioengineering, Central South University, Changsha, China
3 shared publications
Latest Publications
- 8 August 2025
- Published by Springer Nature in Applied Physics A
- Vol. 131 (9) , 1-11
New insight into non-isothermal kinetics of oxidation of SiC powders: the effect of particle size
- 8 August 2025
- Published by Springer Nature in Applied Physics A
- Vol. 131 (9) , 1-11
New insight into non-isothermal kinetics of oxidation of SiC powders: the effect of particle size
- 30 September 2024
- Published by Springer Nature in Ionics
- Vol. 30 (12) , 7969-7977
Waste to wealth: calcium-magnesium mud-coated polypropylene separator for lithium-ion battery
- 30 September 2024
- Published by Springer Nature in Ionics
- Vol. 30 (12) , 7969-7977
Waste to wealth: calcium-magnesium mud-coated polypropylene separator for lithium-ion battery
- 23 July 2024
- Published by Springer Nature in Physics and Chemistry of Minerals
- Vol. 51 (3) , 1-9
New insight into the phase transition and kinetics of the dehydroxylation of bulk-to-nano chrysotile
- 23 July 2024
- Published by Springer Nature in Physics and Chemistry of Minerals
- Vol. 51 (3) , 1-9
New insight into the phase transition and kinetics of the dehydroxylation of bulk-to-nano chrysotile
- 31 July 2023
- Published by Springer Nature in Journal of Materials Science
- Vol. 58 (30) , 12481-12489
Thermal oxidation etched carbon fiber aerogels with hierarchical pore structure as high-performance oil adsorbent
- 31 July 2023
- Published by Springer Nature in Journal of Materials Science
- Vol. 58 (30) , 12481-12489
Thermal oxidation etched carbon fiber aerogels with hierarchical pore structure as high-performance oil adsorbent
- 9 June 2023
- Published by Wiley in ChemistrySelect
- Vol. 8 (22)
In‐situ Electrochemical Strategy for Preparing Concentrated Electrolytes in Inorganic Mineral Frameworks by Exhausting Solvent Molecules
Concentrated electrolytes are attracting attention because of superior electrochemical stability. A typical method to prepare concentrated electrolytes is by adding additional expensive lithium salts to the diluent electrolytes. Herein, a novel quasi‐solid electrolyte, “concentrated electrolyte‐in‐mineral frameworks” (CEIMF), was prepared by in‐situ exhausting solvent molecules. The obtained electrolyte showed an outstanding lithium‐ion transference number of 0.936 and Li‐ion conductivity of 3.85×10 −4 S cm −1 at room temperature, and exhibited excellent electrochemical stability (corresponding to the oxidation voltage of 5.2 V). The LiFePO 4 //Li cells assembled with CEIMF displayed superior long‐term cycle stability with an initial discharge specific capacity of 92.7 mA h g −1 and capacity retention of 72.4 % after 1100 cycles at 1 C. In addition, the cycle performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 //Li batteries was improved by the use of CEIMF as electrolytes. This work provides a novel in‐situ strategy to construct hybrid electrolytes for advanced lithium‐ion batteries.
- 9 June 2023
- Published by Wiley in ChemistrySelect
- Vol. 8 (22)
In‐situ Electrochemical Strategy for Preparing Concentrated Electrolytes in Inorganic Mineral Frameworks by Exhausting Solvent Molecules
Concentrated electrolytes are attracting attention because of superior electrochemical stability. A typical method to prepare concentrated electrolytes is by adding additional expensive lithium salts to the diluent electrolytes. Herein, a novel quasi‐solid electrolyte, “concentrated electrolyte‐in‐mineral frameworks” (CEIMF), was prepared by in‐situ exhausting solvent molecules. The obtained electrolyte showed an outstanding lithium‐ion transference number of 0.936 and Li‐ion conductivity of 3.85×10 −4 S cm −1 at room temperature, and exhibited excellent electrochemical stability (corresponding to the oxidation voltage of 5.2 V). The LiFePO 4 //Li cells assembled with CEIMF displayed superior long‐term cycle stability with an initial discharge specific capacity of 92.7 mA h g −1 and capacity retention of 72.4 % after 1100 cycles at 1 C. In addition, the cycle performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 //Li batteries was improved by the use of CEIMF as electrolytes. This work provides a novel in‐situ strategy to construct hybrid electrolytes for advanced lithium‐ion batteries.
- 31 May 2023
- Published by Wiley in Energy Technology
- Vol. 11 (8)
Interfacial Coupling‐Induced Pseudocapacitance in LiFePO4@Polypyrrole Heterostructures Toward High‐Rate Lithium Storage
The olivine‐structured LiFePO4 (LFP) materials are widely used as commercial cathodes due to its high thermal/chemical stability, long cycle life, low price, etc. However, the poor high‐rate performance severely hinders its high‐power applications due to intrinsically diffusion‐controlled lithium storage. Herein, an interfacial coupling‐induced pseudocapacitance (ICIPC) strategy to realize high‐rate capacity lithium storage of LiFePO4@ polypyrrole (LFP@PPY) is provided. The strong interfacial coupling interaction between LFP and polypyrrole (PPY) promotes interfacial pseudocapacitance as a major Li+ storage mechanism during the charge/discharge process at high rates. The dynamic combination of interfacial and diffusion lithium storage of electrodes can enhance reaction kinetics, the rate capability and cyclic performance. In addition, the nanoscale PPY coating layer effectively improves the surface conductivity of the LFP particles and the charge transfer kinetics of electrochemical reactions. Therefore, the LFP@PPY cathode exhibits remarkable rate capability with a capacity of 105 mAh g−1at 10 A g−1 and 84 mAh g−1 at 20 A g−1 and excellent cyclic stability performance with the initial capacity of 106.7 mAh g−1 at 10 C (91.2 mAh g−1 after 500 cycles). The ICIPC strategy may be extended to other cathodes (LiCoO2, etc.) to improve the high‐rate performance.
- 31 May 2023
- Published by Wiley in Energy Technology
- Vol. 11 (8)
Interfacial Coupling‐Induced Pseudocapacitance in LiFePO4@Polypyrrole Heterostructures Toward High‐Rate Lithium Storage
The olivine‐structured LiFePO4 (LFP) materials are widely used as commercial cathodes due to its high thermal/chemical stability, long cycle life, low price, etc. However, the poor high‐rate performance severely hinders its high‐power applications due to intrinsically diffusion‐controlled lithium storage. Herein, an interfacial coupling‐induced pseudocapacitance (ICIPC) strategy to realize high‐rate capacity lithium storage of LiFePO4@ polypyrrole (LFP@PPY) is provided. The strong interfacial coupling interaction between LFP and polypyrrole (PPY) promotes interfacial pseudocapacitance as a major Li+ storage mechanism during the charge/discharge process at high rates. The dynamic combination of interfacial and diffusion lithium storage of electrodes can enhance reaction kinetics, the rate capability and cyclic performance. In addition, the nanoscale PPY coating layer effectively improves the surface conductivity of the LFP particles and the charge transfer kinetics of electrochemical reactions. Therefore, the LFP@PPY cathode exhibits remarkable rate capability with a capacity of 105 mAh g−1at 10 A g−1 and 84 mAh g−1 at 20 A g−1 and excellent cyclic stability performance with the initial capacity of 106.7 mAh g−1 at 10 C (91.2 mAh g−1 after 500 cycles). The ICIPC strategy may be extended to other cathodes (LiCoO2, etc.) to improve the high‐rate performance.
- 3 January 2022
- Published by Springer Nature in Journal of Materials Science
- Vol. 57 (5) , 3211-3221
Tailoring pore structures and hydrophobicity of monolithic carbon nanofiber aerogels for optimized adsorption performance
- 3 January 2022
- Published by Springer Nature in Journal of Materials Science
- Vol. 57 (5) , 3211-3221
Tailoring pore structures and hydrophobicity of monolithic carbon nanofiber aerogels for optimized adsorption performance
- 12 July 2021
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 13 (32) , 13873-13881
Engineering hollow carbon spheres: directly from solid resin spheres to porous hollow carbon spheres via air induced linker cleaving
Hollow carbon spheres (HCSs) have broad application in many fields such as catalysis, adsorption and energy storage. Due to various restrictions on hard and soft templates, self-templating methods have received extensive attention. Generally, the conventional self-templating method includes two steps, including the hollowing and carbonization process. Herein, a facile novel one-step air induced linker cleaving (AILC) method was developed to synthesize HCSs using 3-aminophenol formaldehyde (APF) resin spheres as the carbon precursor. In this case, the cavitation and carbonization processes occur simultaneously. The as-prepared HCSs were characterized by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) and Raman spectroscopy. It was found that the cleavage of the ether bond groups (Ar–O–C) and the methylene (–CH2) in the APF resulted in cavitation and carbonization. The degree of cavitation and carbonization can be adjusted by controlling the thermal treatment temperature and time in air. Furthermore, the sulfur cathode containing HCSs heated at 400 °C exhibited excellent electrochemical performance with an initial discharge capacity of 1006 mA h g−1 at 0.2 C, and a low capacity decay rate of 0.097% per cycle over 500 cycles at 1 C. The novel one-step AILC strategy will pave a new avenue for the synthesis of hollow carbon spheres and their promising application in different areas.
- 12 July 2021
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 13 (32) , 13873-13881
Engineering hollow carbon spheres: directly from solid resin spheres to porous hollow carbon spheres via air induced linker cleaving
Hollow carbon spheres (HCSs) have broad application in many fields such as catalysis, adsorption and energy storage. Due to various restrictions on hard and soft templates, self-templating methods have received extensive attention. Generally, the conventional self-templating method includes two steps, including the hollowing and carbonization process. Herein, a facile novel one-step air induced linker cleaving (AILC) method was developed to synthesize HCSs using 3-aminophenol formaldehyde (APF) resin spheres as the carbon precursor. In this case, the cavitation and carbonization processes occur simultaneously. The as-prepared HCSs were characterized by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) and Raman spectroscopy. It was found that the cleavage of the ether bond groups (Ar–O–C) and the methylene (–CH2) in the APF resulted in cavitation and carbonization. The degree of cavitation and carbonization can be adjusted by controlling the thermal treatment temperature and time in air. Furthermore, the sulfur cathode containing HCSs heated at 400 °C exhibited excellent electrochemical performance with an initial discharge capacity of 1006 mA h g−1 at 0.2 C, and a low capacity decay rate of 0.097% per cycle over 500 cycles at 1 C. The novel one-step AILC strategy will pave a new avenue for the synthesis of hollow carbon spheres and their promising application in different areas.
- 1 March 2021
- Published by Springer Nature in Journal of Central South University
- Vol. 28 (3) , 669-678
Highly-dispersed iron element decorated nickel foam synthesized by an acid-free and one-pot method for enzyme-free glucose sensor
- 1 March 2021
- Published by Springer Nature in Journal of Central South University
- Vol. 28 (3) , 669-678
Highly-dispersed iron element decorated nickel foam synthesized by an acid-free and one-pot method for enzyme-free glucose sensor
- 1 January 2020
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 239
Solvent-free template synthesis of SnO2/C hybrid hollow spheres for superior lithium-sulfur batteries
- 1 January 2020
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 239
Solvent-free template synthesis of SnO2/C hybrid hollow spheres for superior lithium-sulfur batteries