Bonan Kang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Bonan Kang has a total of 81 co-authors. Here are the top co-authors by number of shared publications:
Qing Sun
State Key Laboratory of Integrated Optoelectronics Key Laboratory of Automobile Materials of MOE International Center of Computational Method and Software and College of Materials Science and Engineering Jilin University Changchun China
17 shared publicationsBo Shen
State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering
15 shared publicationsS. Ravi P. Silva
Nanoelectronics Centre Advanced Technology Institute University of Surrey Guildford Surrey UK
14 shared publicationsXiangxin Meng
State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering
13 shared publicationsDie Hu
State Key Laboratory on Integrated Optoelectronics College of Electronic Science and Engineering Jilin University Changchun China
12 shared publications- Sembukuttiarachilage Ravi Pradip Silva
University of Surrey
9 shared publications
Latest Publications
- Open Access
- 3 March 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (41) , e00017
Carbonyl‐Amine Synergistic Dual‐Site Passivation for Efficient and Stable Wide‐Bandgap Perovskite Solar Cells
As the front absorber in all‐perovskite tandem solar cells (TSCs), wide‐bandgap (WBG) perovskite solar cells (PSCs) play a pivotal role in dictating the overall device efficiency. However, a high density of under‐coordinated Pb 2+ at the perovskite surface and a significant mismatch in the interface energy levels can lead to substantial open circuit voltage loss ( V OC ), which can severely affect device stability and pose a significant challenge to the application of WBG PSCs. To address these issues, we treated the perovskite surface with the bifunctional passivating molecule 2‐aminoacetophenone hydrochloride (AAPCl). Mechanistically, the C═O moiety can coordinate with uncoordinated Pb 2+ defects to suppresses interface non‐radiative charge recombination, whereas the ─NH 2 functional group interacts with halide ions to mitigates photoinduced halide segregation. The optimal device we prepared achieved an impressive V OC of 1.348 V and a high power conversion efficiency (PCE) of 20.81%, one of the highest efficiencies reported for 1.78 eV WBG PSCs. Furthermore, the unencapsulated device retained 90% of its initial PCE after ageing in air for 94 days. Consequently, these findings underscore the efficacy of the bifunctional passivation strategy in simultaneously boosting the photovoltaic performance and operational stability of WBG PSCs.
- 3 March 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (41) , e00017
Open AccessCarbonyl‐Amine Synergistic Dual‐Site Passivation for Efficient and Stable Wide‐Bandgap Perovskite Solar Cells
As the front absorber in all‐perovskite tandem solar cells (TSCs), wide‐bandgap (WBG) perovskite solar cells (PSCs) play a pivotal role in dictating the overall device efficiency. However, a high density of under‐coordinated Pb 2+ at the perovskite surface and a significant mismatch in the interface energy levels can lead to substantial open circuit voltage loss ( V OC ), which can severely affect device stability and pose a significant challenge to the application of WBG PSCs. To address these issues, we treated the perovskite surface with the bifunctional passivating molecule 2‐aminoacetophenone hydrochloride (AAPCl). Mechanistically, the C═O moiety can coordinate with uncoordinated Pb 2+ defects to suppresses interface non‐radiative charge recombination, whereas the ─NH 2 functional group interacts with halide ions to mitigates photoinduced halide segregation. The optimal device we prepared achieved an impressive V OC of 1.348 V and a high power conversion efficiency (PCE) of 20.81%, one of the highest efficiencies reported for 1.78 eV WBG PSCs. Furthermore, the unencapsulated device retained 90% of its initial PCE after ageing in air for 94 days. Consequently, these findings underscore the efficacy of the bifunctional passivation strategy in simultaneously boosting the photovoltaic performance and operational stability of WBG PSCs.
- 31 December 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (1) , 576-585
Preburied Engineering Achieving High-Performance Flexible MAPbI 3 Perovskite Solar Cells
- 31 December 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (1) , 576-585
Preburied Engineering Achieving High-Performance Flexible MAPbI 3 Perovskite Solar Cells
- 14 April 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (20) , 10194-10204
Enhancing the efficiency of blue organic light-emitting diodes by using a dual emitting layer structure
Blue, as one of the three primary colors, plays a crucial role in the advancement of high-efficiency organic light-emitting diodes (OLEDs). However, achieving high-performance blue OLEDs remains a significant challenge in flat-panel display technology. In this study, we developed highly efficient blue phosphorescent OLEDs (PhOLEDs) by employing a dual emitting layer (EML) structure. Two fabrication methods were explored to optimize device performance. In the first approach, bis(3,5-difluoro-2-(2-pyridyl)phenyl)(2-carboxypyridyl)iridium(III) (FIrpic) was doped into two host materials—1,3-bis(carbazol-9-yl)benzene (mCP) and 2,4,6-tris[3-(diphenylphosphinyl)phenyl]-1,3,5-triazine (PO-T2T). By precisely tuning the doping concentration and the thickness of the emitting layers, we achieved a maximum external quantum efficiency (EQE) of 17.49% and a peak brightness of 13 580 cd m−2. In the second approach, an ultra-thin layer of 2,2′,2′′-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TPBi) was inserted as a hole blocking layer (HBL) between the mCP:FIrpic emitting layers. This modification further enhanced device performance, facilitating an EQE of 18.99% and a peak brightness of 15 890 cd m−2. These results suggest that the superior performance of our devices is attributed to enhanced multi-channel energy transfer between the host materials and the luminescent guest, effectively expanding the exciton formation region and optimizing the carrier balance. Our findings demonstrate the potential of the dual emitting layer strategy in the design of high-performance blue PhOLEDs, paving the way for future advancements in OLED technology.
- 14 April 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (20) , 10194-10204
Enhancing the efficiency of blue organic light-emitting diodes by using a dual emitting layer structure
Blue, as one of the three primary colors, plays a crucial role in the advancement of high-efficiency organic light-emitting diodes (OLEDs). However, achieving high-performance blue OLEDs remains a significant challenge in flat-panel display technology. In this study, we developed highly efficient blue phosphorescent OLEDs (PhOLEDs) by employing a dual emitting layer (EML) structure. Two fabrication methods were explored to optimize device performance. In the first approach, bis(3,5-difluoro-2-(2-pyridyl)phenyl)(2-carboxypyridyl)iridium(III) (FIrpic) was doped into two host materials—1,3-bis(carbazol-9-yl)benzene (mCP) and 2,4,6-tris[3-(diphenylphosphinyl)phenyl]-1,3,5-triazine (PO-T2T). By precisely tuning the doping concentration and the thickness of the emitting layers, we achieved a maximum external quantum efficiency (EQE) of 17.49% and a peak brightness of 13 580 cd m−2. In the second approach, an ultra-thin layer of 2,2′,2′′-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TPBi) was inserted as a hole blocking layer (HBL) between the mCP:FIrpic emitting layers. This modification further enhanced device performance, facilitating an EQE of 18.99% and a peak brightness of 15 890 cd m−2. These results suggest that the superior performance of our devices is attributed to enhanced multi-channel energy transfer between the host materials and the luminescent guest, effectively expanding the exciton formation region and optimizing the carrier balance. Our findings demonstrate the potential of the dual emitting layer strategy in the design of high-performance blue PhOLEDs, paving the way for future advancements in OLED technology.
- 27 February 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (10) , 3883-3890
Perovskite Crystallization Regulation by a Green Antisolvent for High-Performance NiOx-Based Inverted Solar Cells
Environmentally friendly antisolvents are key to achieving efficient, reproducible, and sustainable perovskite solar cells (PSCs). Here, a comparison was made between the traditional highly toxic chlorobenzene (CB) antisolvent and green antisolvents ethyl acetate (EA) and dimethyl carbonate (DMC). The employment of green antisolvent DMC was shown to result in the formation of perovskite films with enhanced grain size and superior crystal quality. This leads to an optimal energy level alignment with the electron transport layer, effectively mitigating the nonradiative recombination caused by film imperfections, reducing the loss of organic components during the annealing process, and suppressing the formation of the lead iodide phase. Finally, the champion device, based on the antisolvent DMC, exhibited a high power conversion efficiency (PCE) of 25.18%, which is one of the high PCEs reported for this device structure. Moreover, the device maintains 92% of its original PCE after approximately 1000 h under environmental conditions.
- 27 February 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (10) , 3883-3890
Perovskite Crystallization Regulation by a Green Antisolvent for High-Performance NiOx-Based Inverted Solar Cells
Environmentally friendly antisolvents are key to achieving efficient, reproducible, and sustainable perovskite solar cells (PSCs). Here, a comparison was made between the traditional highly toxic chlorobenzene (CB) antisolvent and green antisolvents ethyl acetate (EA) and dimethyl carbonate (DMC). The employment of green antisolvent DMC was shown to result in the formation of perovskite films with enhanced grain size and superior crystal quality. This leads to an optimal energy level alignment with the electron transport layer, effectively mitigating the nonradiative recombination caused by film imperfections, reducing the loss of organic components during the annealing process, and suppressing the formation of the lead iodide phase. Finally, the champion device, based on the antisolvent DMC, exhibited a high power conversion efficiency (PCE) of 25.18%, which is one of the high PCEs reported for this device structure. Moreover, the device maintains 92% of its original PCE after approximately 1000 h under environmental conditions.
- 9 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (2) , 227-230
Semitransparent Perovskite Solar Cells With Dielectric-Metal-Dielectric Electrode Passivated by Antioxidant Dibutylhydroxytoluene
In recent years, research on perovskite solar cells has mainly focused on improving their efficiency and stability, in order to promote the progress of perovskite solar cells towards commercial applications. Herein, we introduced the effect of antioxidant dibutylhydroxytoluene (BHT) as an upper surface passivator to optimize the performance of perovskite solar cells. On one hand, the hydroxyl group in BHT interacts with I - to inhibit non radiative recombination and improve the performance of perovskite solar cell. On other hand, the hydrophobic groups in BHT protect the perovskite film from water vapor damage and improve the stability of PSC. The PCE of the optimal device is 22.46%, and it can maintain 90% of the initial efficiency even after being stored at room temperature in an air atmosphere for 500 hours. In addition, we also optimized the semitransparent perovskite solar cell using DMD electrodes using the above method with 15.81% PCE.
- 9 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (2) , 227-230
Semitransparent Perovskite Solar Cells With Dielectric-Metal-Dielectric Electrode Passivated by Antioxidant Dibutylhydroxytoluene
In recent years, research on perovskite solar cells has mainly focused on improving their efficiency and stability, in order to promote the progress of perovskite solar cells towards commercial applications. Herein, we introduced the effect of antioxidant dibutylhydroxytoluene (BHT) as an upper surface passivator to optimize the performance of perovskite solar cells. On one hand, the hydroxyl group in BHT interacts with I - to inhibit non radiative recombination and improve the performance of perovskite solar cell. On other hand, the hydrophobic groups in BHT protect the perovskite film from water vapor damage and improve the stability of PSC. The PCE of the optimal device is 22.46%, and it can maintain 90% of the initial efficiency even after being stored at room temperature in an air atmosphere for 500 hours. In addition, we also optimized the semitransparent perovskite solar cell using DMD electrodes using the above method with 15.81% PCE.
- 30 May 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (45)
SnO2 Surface Modification and Perovskite Buried Interface Passivation by 2,5‐Furandicarboxylic Acid for Flexible Perovskite Solar Cells
Flexible perovskite solar cells (PSCs) have received great attention due to their low weight, high power ratio, and potential applications in wearable electronic products. The efficiency and stability of flexible PSCs are directly affected by the carrier extraction and transport capabilities of electron transport layer. Herein, efficient flexible PSCs are prepared through incorporating 2,5‐Furandicarboxylic acid (FDCA) multifunctional intermediate layer between tin oxide (SnO2) and perovskite, which can effectively eliminate defects at the interfacial to increase the electron mobility of the SnO2 layer, modify the surface of SnO2 to shift the conduction band upward to improve interface charge extraction, passivate the buried interface of perovskite to induce larger perovskite crystal growth, and establish a bridge between SnO2 and perovskite to improve charge collection efficiency. As a result, the rigid PSCs with FDCA display a champion power conversion efficiency (PCE) of 24.53% with a high open circuit voltage (VOC) of 1.204 V. Furthermore, the flexible device with FDCA achieves a high PCE of 22.10%, and preserve 90% of its initial PCE after aging for 500 h at ambient condition without encapsulation, and maintain 81% of its original PCE after 10,000 bending cycles.
- 30 May 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (45)
SnO2 Surface Modification and Perovskite Buried Interface Passivation by 2,5‐Furandicarboxylic Acid for Flexible Perovskite Solar Cells
Flexible perovskite solar cells (PSCs) have received great attention due to their low weight, high power ratio, and potential applications in wearable electronic products. The efficiency and stability of flexible PSCs are directly affected by the carrier extraction and transport capabilities of electron transport layer. Herein, efficient flexible PSCs are prepared through incorporating 2,5‐Furandicarboxylic acid (FDCA) multifunctional intermediate layer between tin oxide (SnO2) and perovskite, which can effectively eliminate defects at the interfacial to increase the electron mobility of the SnO2 layer, modify the surface of SnO2 to shift the conduction band upward to improve interface charge extraction, passivate the buried interface of perovskite to induce larger perovskite crystal growth, and establish a bridge between SnO2 and perovskite to improve charge collection efficiency. As a result, the rigid PSCs with FDCA display a champion power conversion efficiency (PCE) of 24.53% with a high open circuit voltage (VOC) of 1.204 V. Furthermore, the flexible device with FDCA achieves a high PCE of 22.10%, and preserve 90% of its initial PCE after aging for 500 h at ambient condition without encapsulation, and maintain 81% of its original PCE after 10,000 bending cycles.
Green Material Chlorin e6 Passivation Improves the Efficiency of Perovskite Solar Cells
Functional passivation agents have been shown to effectively optimize the crystallization process and passivate defects on the surface and grain boundaries. People have conducted extensive research on the passivation mechanisms of various passivation agents to obtain more effective passivation agents. Researchers are gradually focusing on natural ingredients in the search for suitable passivation agents due to the wide variety, green color, and ease of production. As a result, the natural chlorophyll component chlorin e6 (CE‐6) is first combined with perovskite solar cells (PSCs) to improve their performance. Following the incorporation of CE‐6 into the perovskite layer, various functional groups of CE‐6 are used to effectively reduce traps on the perovskite surface, suppress charge recombination at the interface, improve carrier transfer rate and carrier extraction efficiency, and ultimately improve efficiency. The optimal device achieves a power conversion efficiency (PCE) of 21.14% and maintains its initial PCE of 84% after being stored in a room‐temperature air environment for 500 h. Furthermore, semitransparent PSC (ST‐PSC) is made with 13.33% PCE and 5.53% average visible light transmittance. The findings show that natural material CE‐6 performs well in the perovskite layer and confirms the promising prospects for optimizing ST‐PSC.
Green Material Chlorin e6 Passivation Improves the Efficiency of Perovskite Solar Cells
Functional passivation agents have been shown to effectively optimize the crystallization process and passivate defects on the surface and grain boundaries. People have conducted extensive research on the passivation mechanisms of various passivation agents to obtain more effective passivation agents. Researchers are gradually focusing on natural ingredients in the search for suitable passivation agents due to the wide variety, green color, and ease of production. As a result, the natural chlorophyll component chlorin e6 (CE‐6) is first combined with perovskite solar cells (PSCs) to improve their performance. Following the incorporation of CE‐6 into the perovskite layer, various functional groups of CE‐6 are used to effectively reduce traps on the perovskite surface, suppress charge recombination at the interface, improve carrier transfer rate and carrier extraction efficiency, and ultimately improve efficiency. The optimal device achieves a power conversion efficiency (PCE) of 21.14% and maintains its initial PCE of 84% after being stored in a room‐temperature air environment for 500 h. Furthermore, semitransparent PSC (ST‐PSC) is made with 13.33% PCE and 5.53% average visible light transmittance. The findings show that natural material CE‐6 performs well in the perovskite layer and confirms the promising prospects for optimizing ST‐PSC.
Choline Derivative as a Multifunctional Interfacial Bridge through Synergistic Effects for Improving the Efficiency and Stability of Perovskite Solar Cells
The interfacial carrier non‐radiative recombination caused by buried defects in electron transport layer (ETL) material and the energy barrier severely hinders further improvement in efficiency and stability of perovskite solar cells (PSCs). In this study, the effect of the SnO 2 ETL doped with choline chloride (CC), acetylcholine chloride (AC), and phosphocholine chloride sodium salt (PCSS) are investigated. These dopants modify the interface between SnO 2 ETL and perovskite layer, acting as a bridge through synergistic effects to form uniform ETL films, enhance the interface contact, and passivate defects. Ultimately, compared with CC (which with ─OH) and AC (which with C═O), the PCSS with P═O and sodium ions groups is more beneficial for improving performance. The device based on PCSS‐doped SnO 2 ETL achieves an efficiency of 23.06% with a high V OC of 1.2 V, which is considerably higher than the control device (20.55%). Moreover, after aging for 500 h at a temperature of 25 °C and relative humidity (RH) of 30–40%, the unsealed device based on SnO 2 ‐PCSS ETL maintains 94% of its initial efficiency, while the control device only 80%. This study provides a meaningful reference for the design and selection of ideal pre‐buried additive molecules.
Choline Derivative as a Multifunctional Interfacial Bridge through Synergistic Effects for Improving the Efficiency and Stability of Perovskite Solar Cells
The interfacial carrier non‐radiative recombination caused by buried defects in electron transport layer (ETL) material and the energy barrier severely hinders further improvement in efficiency and stability of perovskite solar cells (PSCs). In this study, the effect of the SnO 2 ETL doped with choline chloride (CC), acetylcholine chloride (AC), and phosphocholine chloride sodium salt (PCSS) are investigated. These dopants modify the interface between SnO 2 ETL and perovskite layer, acting as a bridge through synergistic effects to form uniform ETL films, enhance the interface contact, and passivate defects. Ultimately, compared with CC (which with ─OH) and AC (which with C═O), the PCSS with P═O and sodium ions groups is more beneficial for improving performance. The device based on PCSS‐doped SnO 2 ETL achieves an efficiency of 23.06% with a high V OC of 1.2 V, which is considerably higher than the control device (20.55%). Moreover, after aging for 500 h at a temperature of 25 °C and relative humidity (RH) of 30–40%, the unsealed device based on SnO 2 ‐PCSS ETL maintains 94% of its initial efficiency, while the control device only 80%. This study provides a meaningful reference for the design and selection of ideal pre‐buried additive molecules.
- 30 December 2023
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 9 (1) , 171-181
Self-Healing, Laminated, and Low Resistance NH3 Sensor Based on 6,6′,6″-(Nitrilotris(benzene-4,1-diyl))tris(5-phenylpyrazine-2,3-dicarbonitrile) Sensing Material Operating at Room Temperature
With the rapid development of the concept of the Internet of Things (IoT), gas sensors with the function of simulating the human sense of smell became irreplaceable as a key element. Among them, ammonia (NH3) sensors played an important role in respiration tests, environmental monitoring, safety, and other fields. However, the fabrication of the high-performance device with high stability and resistance to mechanical damages was still a challenge. In this work, polyurethane (PU) with excellent self-healing ability was applied as the substrate, and the sensor was designed from new sensitive material design and device structure optimization, through applying the organic molecule with groups which could absorb NH3 and the laminated structure to shorten the electronic transmission path to achieve a low resistance state and favorable sensing properties. Accordingly, a room temperature flexible NH3 sensor based on 6,6',6″-(nitrilotris(benzene-4,1-diyl))tris(5-phenylpyrazine-2,3-dicarbonitrile) (TPA-3DCNPZ) was successfully developed. The device could self-heal by means of a thermal evaporation assisted method. It exhibited a detection limit of 1 ppm at 98% relative humidity (RH), as well as great stability, selectivity, bending flexibility, and self-healing properties. The improved NH3 sensing performance under high RH was further investigated by complex impedance plots (CIPs) and density functional theory (DFT), attributing to the enhanced adsorption of NH3. The TPA-3DCNPZ based NH3 sensors proved to have great potential for application on simulated exhaled breath to determine the severity of kidney diseases and the progress of treatment. This work also provided new ideas for the construction of high-performance room temperature NH3 sensors.
- 30 December 2023
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 9 (1) , 171-181
Self-Healing, Laminated, and Low Resistance NH3 Sensor Based on 6,6′,6″-(Nitrilotris(benzene-4,1-diyl))tris(5-phenylpyrazine-2,3-dicarbonitrile) Sensing Material Operating at Room Temperature
With the rapid development of the concept of the Internet of Things (IoT), gas sensors with the function of simulating the human sense of smell became irreplaceable as a key element. Among them, ammonia (NH3) sensors played an important role in respiration tests, environmental monitoring, safety, and other fields. However, the fabrication of the high-performance device with high stability and resistance to mechanical damages was still a challenge. In this work, polyurethane (PU) with excellent self-healing ability was applied as the substrate, and the sensor was designed from new sensitive material design and device structure optimization, through applying the organic molecule with groups which could absorb NH3 and the laminated structure to shorten the electronic transmission path to achieve a low resistance state and favorable sensing properties. Accordingly, a room temperature flexible NH3 sensor based on 6,6',6″-(nitrilotris(benzene-4,1-diyl))tris(5-phenylpyrazine-2,3-dicarbonitrile) (TPA-3DCNPZ) was successfully developed. The device could self-heal by means of a thermal evaporation assisted method. It exhibited a detection limit of 1 ppm at 98% relative humidity (RH), as well as great stability, selectivity, bending flexibility, and self-healing properties. The improved NH3 sensing performance under high RH was further investigated by complex impedance plots (CIPs) and density functional theory (DFT), attributing to the enhanced adsorption of NH3. The TPA-3DCNPZ based NH3 sensors proved to have great potential for application on simulated exhaled breath to determine the severity of kidney diseases and the progress of treatment. This work also provided new ideas for the construction of high-performance room temperature NH3 sensors.