Zhongbin Pan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhongbin Pan has a total of 224 co-authors. Here are the top co-authors by number of shared publications:
- Jinjun Liu
School of Materials Science and Chemical Engineering, Ningbo University, Ningbo, Zhejiang, 315211, China
33 shared publications - Jiwei Zhai
Functional Materials Research Laboratory School of Materials Science and Engineering Key Laboratory of Advanced Civil Engineering Materials of Ministry of Education Tongji University Shanghai China
21 shared publications Peng Li
School of Materials Science and Engineering, Laboratory of Sensitive Materials and Devices Shandong Department of Education, Liaocheng University, Liaocheng, China
20 shared publicationsJiwei Zhai
School of Materials Science & Engineering, Tongji University, Shanghai, 201804, China
18 shared publicationsJinjun Liu
School of Materials Science and Chemical Engineering
14 shared publicationsZhicheng Li
State Key Laboratory of Advanced Polymer Materials Polymer Research Institute of Sichuan University Chengdu China
13 shared publications
Latest Publications
- 17 November 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (68) , 46529-46538
Local polarization heterogeneity mediates reversible switching in PbZrO 3 -based antiferroelectrics
Local polar-antipolar heterogeneity disrupts collective switching and enables high-density, efficient energy storage in PbZrO 3 -based antiferroelectrics.
- 17 November 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (68) , 46529-46538
Local polarization heterogeneity mediates reversible switching in PbZrO 3 -based antiferroelectrics
Local polar-antipolar heterogeneity disrupts collective switching and enables high-density, efficient energy storage in PbZrO 3 -based antiferroelectrics.
- 20 October 2026
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (20) , 7149-7157
Machine-learning-guided discovery of thermally anchored polar heterostructures for harsh-environment capacitors
Machine learning identifies lead-free BNBT-BSHT ceramics with thermally anchored polar heterostructures. Fabricated MLCCs achieve W rec of 24.12 J cm⁻³ (95% efficiency) with stable wide-temperature performance (20–200 °C).
- 20 October 2026
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (20) , 7149-7157
Machine-learning-guided discovery of thermally anchored polar heterostructures for harsh-environment capacitors
Machine learning identifies lead-free BNBT-BSHT ceramics with thermally anchored polar heterostructures. Fabricated MLCCs achieve W rec of 24.12 J cm⁻³ (95% efficiency) with stable wide-temperature performance (20–200 °C).
- 16 June 2026
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 13 (14) , 6273-6282
Flattening the polarization energy landscape in BiFeO 3 -based dielectrics via nanoscale phase coexistence for superior electrostatic energy storage
Nanoscale rhombohedral/tetragonal phase coexistence flattens the polarization energy landscape and suppresses hysteresis in BiFeO 3 -based dielectrics, enabling a high W rec of 8.12 J cm −3 , 88.2% efficiency, and ultrafast discharge.
- 16 June 2026
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 13 (14) , 6273-6282
Flattening the polarization energy landscape in BiFeO 3 -based dielectrics via nanoscale phase coexistence for superior electrostatic energy storage
Nanoscale rhombohedral/tetragonal phase coexistence flattens the polarization energy landscape and suppresses hysteresis in BiFeO 3 -based dielectrics, enabling a high W rec of 8.12 J cm −3 , 88.2% efficiency, and ultrafast discharge.
- Open Access
- 15 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Breakthrough energy storage in medium-entropy superparaelectrics by triple synergy strategy
High-performance dielectric ceramic capacitors hold immerse potential for advanced electronics and high-power electrical systems. However, achieving both high recoverable energy density (Wrec) and high energy efficiency (η) remains a critical challenge in bulk dielectric ceramics. Herein, we propose a triple-synergistic strategy that integrates medium-entropy superparaelectric design, local structural distortion, and plate-like secondary bismuth titanate phase construction in SrTiO3-based dielectric ceramics. This approach effectively promotes the formation of polymorphic polar nano-regions with short-range polar vectors, enhancing dynamic polarization response. Simultaneously, the introduction of a plate-like secondary bismuth titanate phase within the perovskite matrix significantly increases the breakdown field strength (Eb) by inhibiting breakdown-path propagation. The resulting medium-entropy superparaelectric exhibits a nearly hysteresis-free P-E loop, combined with an ultrahigh Eb and high polarization. Notably, the material achieves a remarkable Wrec of 10.31 J/cm3 along with an ultrahigh η of 90.9%. Furthermore, it demonstrates outstanding charge/discharge performance, excellent thermal stability and robust cycling stability, making it a highly promising candidate for energy storage applications. This study provides a feasible and innovative design strategy for high-performance bulk dielectrics, paving the way for the development of eco-friendly dielectric capacitors for next-generation energy storage systems.
- 15 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessBreakthrough energy storage in medium-entropy superparaelectrics by triple synergy strategy
High-performance dielectric ceramic capacitors hold immerse potential for advanced electronics and high-power electrical systems. However, achieving both high recoverable energy density (Wrec) and high energy efficiency (η) remains a critical challenge in bulk dielectric ceramics. Herein, we propose a triple-synergistic strategy that integrates medium-entropy superparaelectric design, local structural distortion, and plate-like secondary bismuth titanate phase construction in SrTiO3-based dielectric ceramics. This approach effectively promotes the formation of polymorphic polar nano-regions with short-range polar vectors, enhancing dynamic polarization response. Simultaneously, the introduction of a plate-like secondary bismuth titanate phase within the perovskite matrix significantly increases the breakdown field strength (Eb) by inhibiting breakdown-path propagation. The resulting medium-entropy superparaelectric exhibits a nearly hysteresis-free P-E loop, combined with an ultrahigh Eb and high polarization. Notably, the material achieves a remarkable Wrec of 10.31 J/cm3 along with an ultrahigh η of 90.9%. Furthermore, it demonstrates outstanding charge/discharge performance, excellent thermal stability and robust cycling stability, making it a highly promising candidate for energy storage applications. This study provides a feasible and innovative design strategy for high-performance bulk dielectrics, paving the way for the development of eco-friendly dielectric capacitors for next-generation energy storage systems.
- 16 March 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (26) , 16455-16462
Polymer dots enabling ultrahigh capacitive energy storage in cellulose-based all-organic nanocomposites
The cyanoethyl cellulose-based nanocomposites, reinforced by polyethyleneimine-based polymer dots (PEPDs), achieve a high discharged energy density of 35.2 J cm −3 .
- 16 March 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (26) , 16455-16462
Polymer dots enabling ultrahigh capacitive energy storage in cellulose-based all-organic nanocomposites
The cyanoethyl cellulose-based nanocomposites, reinforced by polyethyleneimine-based polymer dots (PEPDs), achieve a high discharged energy density of 35.2 J cm −3 .
- 5 January 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (2) , 1680-1687
Harnessing Nanoscale Heterostructure Core–Shell Phase for Enhanced Energy Storage in BiFeO 3 -Based Ceramics
- 5 January 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (2) , 1680-1687
Harnessing Nanoscale Heterostructure Core–Shell Phase for Enhanced Energy Storage in BiFeO 3 -Based Ceramics
- 31 December 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (32)
Machine Learning‐Augmented Piezoelectric‐Ferroelectret Nanogenerators for Highly Sensitive Respiration Monitoring in Wearable Healthcare
The precise detection of low‐amplitude and spatially variant biomechanical signals continues to present a substantial technological challenge. Ferroelectrets, with their exceptional piezoelectric coefficients and dynamic response characteristics, represent a compelling alternative for developing high‐sensitivity pressure sensors and deformable energy harvesting systems. Herein, we present a highly sensitive poly(vinylidene fluoride) (PVDF) ferroelectret film featuring a cross‐scale pore structure fabricated using organic dimethylhexanediol (DMHD) crystals as sacrificial templates, sandwiched between two PVDF layers, thus forming a piezoelectric‐ferroelectret‐ piezoelectric (PFP) three‐layer thin film. The engineered porous architecture enables the substantial net charge storage and creates an oriented space charge network, where subtle mechanical loading (−1 , and high sensitivity of 595.85 mV·kPa −1 . As a proof‐of‐concept, the PFP device is seamlessly integrated into a facial mask, facilitating accurate recognition of respiratory behaviors. With the assistance of both a Convolutional Neural Network (CNN) and a Bidirectional Long Short‐Term Memory network (BiLSTM), a PEP‐based smart mask can recognize respiratory tracts and multiple breathing patterns with a classification accuracy of up to 100%. This study pioneers a high‐efficacy respiratory monitoring device via ferroelectret ultra‐sensitivity, showing transformative prospects for clinical diagnostics and daily healthcare implementation.
- 31 December 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (32)
Machine Learning‐Augmented Piezoelectric‐Ferroelectret Nanogenerators for Highly Sensitive Respiration Monitoring in Wearable Healthcare
The precise detection of low‐amplitude and spatially variant biomechanical signals continues to present a substantial technological challenge. Ferroelectrets, with their exceptional piezoelectric coefficients and dynamic response characteristics, represent a compelling alternative for developing high‐sensitivity pressure sensors and deformable energy harvesting systems. Herein, we present a highly sensitive poly(vinylidene fluoride) (PVDF) ferroelectret film featuring a cross‐scale pore structure fabricated using organic dimethylhexanediol (DMHD) crystals as sacrificial templates, sandwiched between two PVDF layers, thus forming a piezoelectric‐ferroelectret‐ piezoelectric (PFP) three‐layer thin film. The engineered porous architecture enables the substantial net charge storage and creates an oriented space charge network, where subtle mechanical loading (−1 , and high sensitivity of 595.85 mV·kPa −1 . As a proof‐of‐concept, the PFP device is seamlessly integrated into a facial mask, facilitating accurate recognition of respiratory behaviors. With the assistance of both a Convolutional Neural Network (CNN) and a Bidirectional Long Short‐Term Memory network (BiLSTM), a PEP‐based smart mask can recognize respiratory tracts and multiple breathing patterns with a classification accuracy of up to 100%. This study pioneers a high‐efficacy respiratory monitoring device via ferroelectret ultra‐sensitivity, showing transformative prospects for clinical diagnostics and daily healthcare implementation.
- 17 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (52) , 70680-70689
Local Structural Perturbations Inducing High Energy Density in BiFeO 3 -Based Ceramics
Lead-free BiFeO3-based ceramics have emerged as compelling candidates for high-power energy storage applications, owing to their exceptional combination of high Curie temperature and large spontaneous polarization. However, their widespread adoption has been hindered by intrinsic limitations including low breakdown strength and substantial hysteresis losses. Herein, we propose a strategy of local structural perturbations that significantly enhances the energy storage performance of BiFeO3-based ceramics through the introduction of (Bi2/9La2/9Sm2/9)ZrO3 (BLSZ). This approach effectively suppresses hysteresis loss and delays polarization saturation by reducing polarization anisotropy and domain-switching barriers, while simultaneously enhancing breakdown strength through highly disordered atomic arrangements with localized lattice distortion and grain refinement. Consequently, the optimized BiFeO3-based ceramic delivers a high energy density of 7.4 J cm-3, surpassing most previously reported BiFeO3-based dielectrics. This study highlights the significant potential of BiFeO3-based ceramics for advanced energy storage while providing crucial design guidelines for high-performance dielectric materials.
- 17 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (52) , 70680-70689
Local Structural Perturbations Inducing High Energy Density in BiFeO 3 -Based Ceramics
Lead-free BiFeO3-based ceramics have emerged as compelling candidates for high-power energy storage applications, owing to their exceptional combination of high Curie temperature and large spontaneous polarization. However, their widespread adoption has been hindered by intrinsic limitations including low breakdown strength and substantial hysteresis losses. Herein, we propose a strategy of local structural perturbations that significantly enhances the energy storage performance of BiFeO3-based ceramics through the introduction of (Bi2/9La2/9Sm2/9)ZrO3 (BLSZ). This approach effectively suppresses hysteresis loss and delays polarization saturation by reducing polarization anisotropy and domain-switching barriers, while simultaneously enhancing breakdown strength through highly disordered atomic arrangements with localized lattice distortion and grain refinement. Consequently, the optimized BiFeO3-based ceramic delivers a high energy density of 7.4 J cm-3, surpassing most previously reported BiFeO3-based dielectrics. This study highlights the significant potential of BiFeO3-based ceramics for advanced energy storage while providing crucial design guidelines for high-performance dielectric materials.
- 2 December 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (47) , 41300-41309
Molecular engineering of polyamide-imide copolymers for high-temperature energy storage
A series of polyamide-imide (PAI) copolymers are designed through molecular engineering. The PAI-C film exhibits an outstanding discharged energy density ( U d ) of 5.9 J cm −3 with a charge–discharge efficiency of 90.1% at 150 °C.
- 2 December 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (47) , 41300-41309
Molecular engineering of polyamide-imide copolymers for high-temperature energy storage
A series of polyamide-imide (PAI) copolymers are designed through molecular engineering. The PAI-C film exhibits an outstanding discharged energy density ( U d ) of 5.9 J cm −3 with a charge–discharge efficiency of 90.1% at 150 °C.
- Open Access
- 1 July 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-10
Local heterogeneous dipolar structures drive gigantic capacitive energy storage in antiferroelectric ceramics
Antiferroelectric ceramics, driven by electric-field-induced antiferroelectric-ferroelectric phase transitions, hold exceptional potential for high capacitance density capacitors. However, conventional antiferroelectric ceramics are capable of releasing only 70-80% of the energy during the charging-discharging cycles, limiting their practical applications. Herein, we propose a novel approach using heterogeneous dipolar structures in PbHfO3-based AFE ceramics to achieve remarkable energy density. By compositionally inducing structural order-disorder transitions, heterogeneous dipolar structures with complex interactions are created, within which dipoles can rapidly flip under the applied electric field, thereby substantially reducing the hysteresis losses. Combined with significantly improved breakdown strength, the optimized antiferroelectric ceramics exhibits a large recoverable energy density approximately 20.04 J cm−3 and a high efficiency of around 90.5%, setting a new benchmark for antiferroelectric ceramics. This work, focusing on the atomic scale, clarifies the structure-property relationship and provides valuable insights for developing next-generation high-performance antiferroelectric materials.
- 1 July 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-10
Open AccessLocal heterogeneous dipolar structures drive gigantic capacitive energy storage in antiferroelectric ceramics
Antiferroelectric ceramics, driven by electric-field-induced antiferroelectric-ferroelectric phase transitions, hold exceptional potential for high capacitance density capacitors. However, conventional antiferroelectric ceramics are capable of releasing only 70-80% of the energy during the charging-discharging cycles, limiting their practical applications. Herein, we propose a novel approach using heterogeneous dipolar structures in PbHfO3-based AFE ceramics to achieve remarkable energy density. By compositionally inducing structural order-disorder transitions, heterogeneous dipolar structures with complex interactions are created, within which dipoles can rapidly flip under the applied electric field, thereby substantially reducing the hysteresis losses. Combined with significantly improved breakdown strength, the optimized antiferroelectric ceramics exhibits a large recoverable energy density approximately 20.04 J cm−3 and a high efficiency of around 90.5%, setting a new benchmark for antiferroelectric ceramics. This work, focusing on the atomic scale, clarifies the structure-property relationship and provides valuable insights for developing next-generation high-performance antiferroelectric materials.