Ming Wen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ming Wen has a total of 134 co-authors. Here are the top co-authors by number of shared publications:
- Qingsheng Wu
School of Chemical Science and Engineering, Shanghai Key Laboratory of Chemical Assessment and Sustainability, Tongji University, Shanghai 200092, China
33 shared publications Qingsheng Wu
25 shared publications- Yongqi Fu
Northumbria University
15 shared publications Dandan Wu
10 shared publicationsHao Fang
School of Chemical Science and Engineering, Shanghai Key Laboratory of Chemical Assessment and Sustainability, Tongji University, Shanghai 200092, China
7 shared publicationsQingnan Wu
School of Chemical Science and Engineering, Shanghai Key Laboratory of Chemical Assessment and Sustainability, Tongji University, Shanghai 200092, China
7 shared publications
Latest Publications
- 25 May 2026
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 119, 876-888
Bidirectional electrocatalysis of polysulfides via synergistic P-doping and Te vacancies for lithium-sulfur batteries
- 25 May 2026
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 119, 876-888
Bidirectional electrocatalysis of polysulfides via synergistic P-doping and Te vacancies for lithium-sulfur batteries
- Open Access
- 29 November 2025
- Published by Wiley in Advanced Science
- Vol. 13 (9) , e13049
Exclusive Se‐O Coordination and Fe‐doping Complementation: A Catalytic Strategy for Enhanced Sulfur Redox in Li‐S Batteries
Developing efficient electrocatalysts to accelerate redox kinetics and suppress lithium polysulfides (LiPSs) shuttling remains a key challenge for lithium‐sulfur batteries (LSBs). Although transition‐metal‐oxides exhibit strong adsorption for the LiPSs, their application is impeded by sluggish Li 2 S conversion. Herein, a catalytic strategy is proposed for enhanced sulfur redox in LSBs by complementing exclusive Se‐O coordination and Fe‐doping in spinel Co 3 O 4 (Fe 0.1 Co 2.9 O 4 ‐Se) electrocatalyst. This engineered intersecting‐porous nanoarchitecture, fabricated via an etching‐carbonization method, facilitates electron/mass transport and exposes abundant electroactive sites. Fe 3+ substitution at octahedral Co 3+ sites synergizes with exclusive Se‐O coordination, narrows Co 3 O 4 ’s bandgap, and elevates the d‐band center, thereby enhancing conductivity and strengthening the LiPSs’ adsorption. Such a design promotes instantaneous nucleation of Li 2 S and reduces the bidirectional catalytic energy barrier for achieving superior catalytic activity, outperforming Se‐Fe 0.1 Co 2.9 O 4, where Se in oxygen‐vacancies‐sites coordinates with metal/oxygen ions. Consequently, the S/Fe 0.1 Co 2.9 O 4 ‐Se cathode delivers exceptional cycling stability with an ultralow capacity decay rate of 0.1054% per cycle over 500 cycles at 0.5 C. In a pouch cell with a high sulfur loading (6.1 mg cm −2 ) and lean electrolyte (E/S = 10 µL mg −1 ), it retains a capacity of 4.8 mAh cm −2 after 40 cycles. This work provides a new catalytic strategy for the design of high‐performance LSBs electrocatalysts.
- 29 November 2025
- Published by Wiley in Advanced Science
- Vol. 13 (9) , e13049
Open AccessExclusive Se‐O Coordination and Fe‐doping Complementation: A Catalytic Strategy for Enhanced Sulfur Redox in Li‐S Batteries
Developing efficient electrocatalysts to accelerate redox kinetics and suppress lithium polysulfides (LiPSs) shuttling remains a key challenge for lithium‐sulfur batteries (LSBs). Although transition‐metal‐oxides exhibit strong adsorption for the LiPSs, their application is impeded by sluggish Li 2 S conversion. Herein, a catalytic strategy is proposed for enhanced sulfur redox in LSBs by complementing exclusive Se‐O coordination and Fe‐doping in spinel Co 3 O 4 (Fe 0.1 Co 2.9 O 4 ‐Se) electrocatalyst. This engineered intersecting‐porous nanoarchitecture, fabricated via an etching‐carbonization method, facilitates electron/mass transport and exposes abundant electroactive sites. Fe 3+ substitution at octahedral Co 3+ sites synergizes with exclusive Se‐O coordination, narrows Co 3 O 4 ’s bandgap, and elevates the d‐band center, thereby enhancing conductivity and strengthening the LiPSs’ adsorption. Such a design promotes instantaneous nucleation of Li 2 S and reduces the bidirectional catalytic energy barrier for achieving superior catalytic activity, outperforming Se‐Fe 0.1 Co 2.9 O 4, where Se in oxygen‐vacancies‐sites coordinates with metal/oxygen ions. Consequently, the S/Fe 0.1 Co 2.9 O 4 ‐Se cathode delivers exceptional cycling stability with an ultralow capacity decay rate of 0.1054% per cycle over 500 cycles at 0.5 C. In a pouch cell with a high sulfur loading (6.1 mg cm −2 ) and lean electrolyte (E/S = 10 µL mg −1 ), it retains a capacity of 4.8 mAh cm −2 after 40 cycles. This work provides a new catalytic strategy for the design of high‐performance LSBs electrocatalysts.
- 29 July 2025
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 27 (35) , 10723-10734
Controlling edge active sites by vulcanizing a bimetallic hydroxide for boosting the oxygen evolution reaction
CoNi–S/CoNi(OH)2 constructed by partially vulcanizing CoNi(OH)2 provides high-density edge active sites and exhibits superior activity toward OER, attributed to effective bimetallic cooperation and rapid reconstruction into active S–CoNiOOH.
- 29 July 2025
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 27 (35) , 10723-10734
Controlling edge active sites by vulcanizing a bimetallic hydroxide for boosting the oxygen evolution reaction
CoNi–S/CoNi(OH)2 constructed by partially vulcanizing CoNi(OH)2 provides high-density edge active sites and exhibits superior activity toward OER, attributed to effective bimetallic cooperation and rapid reconstruction into active S–CoNiOOH.
- 3 July 2025
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 110, 133-142
Reconstructing active sites in Ni-Co double hydroxides to enhance electrocatalytic efficiency for nitrate reduction to ammonia
- 3 July 2025
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 110, 133-142
Reconstructing active sites in Ni-Co double hydroxides to enhance electrocatalytic efficiency for nitrate reduction to ammonia
- 29 January 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (10) , 7136-7148
Collaborative reconstruction of FeOOH/FeNiCo-LDH heterogeneous nanosheets for enhancing anion exchange membrane seawater electrolysis
Transition-metal based layered double hydroxides (TM-LDHs) have attracted widespread attention due to their advantages for the electrocatalytic oxygen evolution reaction (OER). However, their sluggish and unstable reconstruction during the OER has seriously limited their applications in water electrolysis at industrial-level current density. Herein, FeOOH/FeNiCo-LDH heterogeneous nanosheets (2.1 nm in thickness) are uniformly integrated on honeycomb-channel N-doped carbon (FeOOH/FeNiCo-LDH/HCNC) through a self-sacrificing and dual-ion etching strategy. Thermodynamically favoured hydrogen/electron-capturing ability of FeOOH together with kinetically favoured rapid mass/electron transfer efficiency of conductive HCNC collaboratively accelerates the reconstruction of FeNiCo-LDH to generate highly active and stable FeNiCoOOH species, which displays an optimal reaction pathway with reduced energy barrier for the OER. Consequently, FeOOH/FeNiCo-LDH/HCNC exhibits superior OER activity in both alkaline freshwater (η10 = 258 mV with Tafel slope of 32.4 mV dec−1) and alkaline natural seawater (η10 = 296 mV with Tafel slope of 54.7 mV dec−1). When applied in anion exchange membrane electrolyzer as OER electrocatalyst, FeOOH/FeNiCo-LDH/HCNC achieves outstanding stability with low cell-voltage increase rates of 1.7 mV h−1 (freshwater) and 1.5 mV h−1 (seawater) over 120 h at the industrially required current density of 500 mA cm−2. This study proposed an ingenious reconstruction strategy for advanced TM-LDH electrocatalysts toward industrial applications.
- 29 January 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (10) , 7136-7148
Collaborative reconstruction of FeOOH/FeNiCo-LDH heterogeneous nanosheets for enhancing anion exchange membrane seawater electrolysis
Transition-metal based layered double hydroxides (TM-LDHs) have attracted widespread attention due to their advantages for the electrocatalytic oxygen evolution reaction (OER). However, their sluggish and unstable reconstruction during the OER has seriously limited their applications in water electrolysis at industrial-level current density. Herein, FeOOH/FeNiCo-LDH heterogeneous nanosheets (2.1 nm in thickness) are uniformly integrated on honeycomb-channel N-doped carbon (FeOOH/FeNiCo-LDH/HCNC) through a self-sacrificing and dual-ion etching strategy. Thermodynamically favoured hydrogen/electron-capturing ability of FeOOH together with kinetically favoured rapid mass/electron transfer efficiency of conductive HCNC collaboratively accelerates the reconstruction of FeNiCo-LDH to generate highly active and stable FeNiCoOOH species, which displays an optimal reaction pathway with reduced energy barrier for the OER. Consequently, FeOOH/FeNiCo-LDH/HCNC exhibits superior OER activity in both alkaline freshwater (η10 = 258 mV with Tafel slope of 32.4 mV dec−1) and alkaline natural seawater (η10 = 296 mV with Tafel slope of 54.7 mV dec−1). When applied in anion exchange membrane electrolyzer as OER electrocatalyst, FeOOH/FeNiCo-LDH/HCNC achieves outstanding stability with low cell-voltage increase rates of 1.7 mV h−1 (freshwater) and 1.5 mV h−1 (seawater) over 120 h at the industrially required current density of 500 mA cm−2. This study proposed an ingenious reconstruction strategy for advanced TM-LDH electrocatalysts toward industrial applications.
- Top Cited PapersOpen Access
- 1 December 2024
- Published by Tsinghua University Press in Nano Research Energy
- Vol. 3 (4) , e9120129
FeCoP sub-nanometric-sheets for electrocatalzing overall water splitting
Renewable electrical energy for electrolysis water can achieve green industrial chains for hydrogen production. However, finding efficient electrocatalysts remains a challenge for green hydrogen. Herein, sub-nanometric FeCoP nanosheets with average thickness of 0.9 nm is constructed through 2D self-assembly driven by cavitation effect of ultrasonics and following phosphating. Benefiting from abundant active sites, enhanced H2O molecular adsorption kinetics, and highly enhanced structural stability, the subcrystalline FeCoP shows excellent electrocatalytic activities of hydrogen evolution reaction (HER) and oxygen evolution reactions (OER). Ultralow overpotential of 37 mV is achieved at 10 mA·cm−2 for HER. When the FeCoP catalyst was used as both cathode and anode for overall water splitting using renewable electrical energy, green hydrogen produced is directly applied for hydrogen fuel cell to drive fan for more than 10 h. Theoretical calculation indicates that subcrystalline FeCoP more easily adsorbs H2O than crystalline one and thus speeds up the kinetics of Volmer step in HER process.
- 1 December 2024
- Published by Tsinghua University Press in Nano Research Energy
- Vol. 3 (4) , e9120129
Top Cited PapersOpen AccessFeCoP sub-nanometric-sheets for electrocatalzing overall water splitting
Renewable electrical energy for electrolysis water can achieve green industrial chains for hydrogen production. However, finding efficient electrocatalysts remains a challenge for green hydrogen. Herein, sub-nanometric FeCoP nanosheets with average thickness of 0.9 nm is constructed through 2D self-assembly driven by cavitation effect of ultrasonics and following phosphating. Benefiting from abundant active sites, enhanced H2O molecular adsorption kinetics, and highly enhanced structural stability, the subcrystalline FeCoP shows excellent electrocatalytic activities of hydrogen evolution reaction (HER) and oxygen evolution reactions (OER). Ultralow overpotential of 37 mV is achieved at 10 mA·cm−2 for HER. When the FeCoP catalyst was used as both cathode and anode for overall water splitting using renewable electrical energy, green hydrogen produced is directly applied for hydrogen fuel cell to drive fan for more than 10 h. Theoretical calculation indicates that subcrystalline FeCoP more easily adsorbs H2O than crystalline one and thus speeds up the kinetics of Volmer step in HER process.
- 25 April 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (42)
Coupling Interaction between Precisely Located Pt Single‐Atoms/Clusters and NiCo‐Layered Double Oxide to Boost Hydrogen Evolution Reaction
Catalysts based on Pt single atom (SA) on metal oxides have shown tremendous potentials for alkaline hydrogen evolution reaction (HER), but they are severely limited by insufficient electron interactions of Pt sites and supports. Herein, a new methodology is developed to precisely locate Pt SAs and Pt clusters into NiCo layered double oxide (LDO) nanosheets, achieved using a dual‐ion etching process with subsequent phase transformation method. Uniquely, the Pt SAs are inserted into LDO layers to form Pt─Co bonds by occupying partial Ni positions, significantly strengthening electron interactions with NiCo LDO and promoting activity of HER. Results from density functional theory calculations indicate that the H* species are preferentially absorbed onto O sites on top of these Pt SAs, which are coupled with their adjacent Pt clusters to accelerate water dissociation in the Volmer step. As‐obtained Pt─NiCo LDO exhibits a low overpotential of 92 mV at 10 mA cm −2 and a Tafel slope of 73 mV dec −1 , an excellent stability over 105 hours at 60 mA cm −2 , and its mass activity is 6 times higher than commercial 20% Pt/C. This study highlights essential functions of coupling interactions between Pt SAs/clusters and LDOs to boost HER for hydrogen energy production.
- 25 April 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (42)
Coupling Interaction between Precisely Located Pt Single‐Atoms/Clusters and NiCo‐Layered Double Oxide to Boost Hydrogen Evolution Reaction
Catalysts based on Pt single atom (SA) on metal oxides have shown tremendous potentials for alkaline hydrogen evolution reaction (HER), but they are severely limited by insufficient electron interactions of Pt sites and supports. Herein, a new methodology is developed to precisely locate Pt SAs and Pt clusters into NiCo layered double oxide (LDO) nanosheets, achieved using a dual‐ion etching process with subsequent phase transformation method. Uniquely, the Pt SAs are inserted into LDO layers to form Pt─Co bonds by occupying partial Ni positions, significantly strengthening electron interactions with NiCo LDO and promoting activity of HER. Results from density functional theory calculations indicate that the H* species are preferentially absorbed onto O sites on top of these Pt SAs, which are coupled with their adjacent Pt clusters to accelerate water dissociation in the Volmer step. As‐obtained Pt─NiCo LDO exhibits a low overpotential of 92 mV at 10 mA cm −2 and a Tafel slope of 73 mV dec −1 , an excellent stability over 105 hours at 60 mA cm −2 , and its mass activity is 6 times higher than commercial 20% Pt/C. This study highlights essential functions of coupling interactions between Pt SAs/clusters and LDOs to boost HER for hydrogen energy production.
- 12 January 2024
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 11 (4) , 1167-1176
3D defect-enriched Cu/Cu2O–Al2O3 zigzag nanostructures for efficient degradation of tetracycline antibiotics
Defect-enriched Cu/Cu2O–Al2O3 nanoribbons with zigzag edges have been prepared and they exhibit superior degradation efficiency on tetracycline antibiotics, due to their better oxygen adsorption and capture ability.
- 12 January 2024
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 11 (4) , 1167-1176
3D defect-enriched Cu/Cu2O–Al2O3 zigzag nanostructures for efficient degradation of tetracycline antibiotics
Defect-enriched Cu/Cu2O–Al2O3 nanoribbons with zigzag edges have been prepared and they exhibit superior degradation efficiency on tetracycline antibiotics, due to their better oxygen adsorption and capture ability.
- Top Cited Papers
- 21 April 2023
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 16 (6) , 2611-2620
Regulating active hydrogen adsorbed on grain boundary defects of nano-nickel for boosting ammonia electrosynthesis from nitrate
The grain boundary defect engineered Ni nanoparticles has been explored for boosting selective nitrate electroreduction to ammonia, and its NH 3 generation rate is much higher than those of the reported copper or noble metal-based catalysts.
- 21 April 2023
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 16 (6) , 2611-2620
Top Cited PapersRegulating active hydrogen adsorbed on grain boundary defects of nano-nickel for boosting ammonia electrosynthesis from nitrate
The grain boundary defect engineered Ni nanoparticles has been explored for boosting selective nitrate electroreduction to ammonia, and its NH 3 generation rate is much higher than those of the reported copper or noble metal-based catalysts.