Hai Yu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hai Yu has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
Qiuhua Wan
9 shared publicationsChanghai Zhao
7 shared publicationsLihui Liang
6 shared publications- Qiuhua Wan
Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun, China
6 shared publications Xinran Lu
6 shared publications- Changhai Zhao
Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun, China
5 shared publications
Latest Publications
- Open Access
- 13 February 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (6) , 065007
Research on error compensation method of reading head spacing variation in linear grating displacement measurement
To improve the absolute positioning accuracy of image-type linear displacement measurement, this paper proposes a method for error compensation of reading head spacing variation in linear grating displacement measurement. Firstly, the principles behind image-type linear displacement measurement were detailed explanation. Secondly, an error model for the variation of the distance between the reading head and the scale grating was established. Thirdly, the error self correction method within the range of measurement is derived through the error model of spacing change. During the test, the spacing between the reading head and the ruler grating changed significantly through our intentional inclined installation, and succeeded in reducing error range with in a 0–240 mm range from −6.4 μm to 0.2 μm down to −1.3 μm to 1 μm. The results confirm the efficacy of the proposed method. Compared with the traditional compensation technology, this method does not need to calibrate the range error, and does not need to strictly ensure the parallelism between the reading head and the ruler grating, so as to realize the self correction of the spacing change error in real time. This research may provide a sound technical basis for further exploration of high-precision, large-scale linear displacement measurement methods.
- 13 February 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (6) , 065007
Open AccessResearch on error compensation method of reading head spacing variation in linear grating displacement measurement
To improve the absolute positioning accuracy of image-type linear displacement measurement, this paper proposes a method for error compensation of reading head spacing variation in linear grating displacement measurement. Firstly, the principles behind image-type linear displacement measurement were detailed explanation. Secondly, an error model for the variation of the distance between the reading head and the scale grating was established. Thirdly, the error self correction method within the range of measurement is derived through the error model of spacing change. During the test, the spacing between the reading head and the ruler grating changed significantly through our intentional inclined installation, and succeeded in reducing error range with in a 0–240 mm range from −6.4 μm to 0.2 μm down to −1.3 μm to 1 μm. The results confirm the efficacy of the proposed method. Compared with the traditional compensation technology, this method does not need to calibrate the range error, and does not need to strictly ensure the parallelism between the reading head and the ruler grating, so as to realize the self correction of the spacing change error in real time. This research may provide a sound technical basis for further exploration of high-precision, large-scale linear displacement measurement methods.
- 28 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Investigation and Calibration of Error Compensation Methods for Linear Image-Type Angular Displacement Measurement
Angular displacement measurement based on image recognition methods is an increasingly popular approach to absolute displacement measurement. Employing multiple, collaborative image sensors can significantly reduce measurement errors when determining angular displacement. However, limited installation space restricts the number of sensors that can be utilized, and residual errors persist even when numerous sensors are employed. We propose an error correction method based on nonlinear fitting of multiple harmonic components to enhance measurement accuracy. This paper begins by elucidating the principles of image-type displacement measurement, then analyzing the harmonic errors inherent to such measurement results. Subsequently, we introduce a method for correcting angular displacement measurement errors based on nonlinear fitting of multiple harmonic components. We validate this method through experimentation. The results indicate that our error correction method can improve measurement accuracy from 510.97" to 0.82" with a code disk diameter of 87 mm when using only one reading head, suggesting that our method is effective. This work may offer a sound technical basis for the advancement of miniaturized and high-precision angular displacement measurement technology.
- 28 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Investigation and Calibration of Error Compensation Methods for Linear Image-Type Angular Displacement Measurement
Angular displacement measurement based on image recognition methods is an increasingly popular approach to absolute displacement measurement. Employing multiple, collaborative image sensors can significantly reduce measurement errors when determining angular displacement. However, limited installation space restricts the number of sensors that can be utilized, and residual errors persist even when numerous sensors are employed. We propose an error correction method based on nonlinear fitting of multiple harmonic components to enhance measurement accuracy. This paper begins by elucidating the principles of image-type displacement measurement, then analyzing the harmonic errors inherent to such measurement results. Subsequently, we introduce a method for correcting angular displacement measurement errors based on nonlinear fitting of multiple harmonic components. We validate this method through experimentation. The results indicate that our error correction method can improve measurement accuracy from 510.97" to 0.82" with a code disk diameter of 87 mm when using only one reading head, suggesting that our method is effective. This work may offer a sound technical basis for the advancement of miniaturized and high-precision angular displacement measurement technology.
- 22 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-7
Thin-Volume Image-Type Angular Displacement Measurement Based on Point Light Reflection
Image-type angular displacement measurement technology based on image recognition algorithm is a high-performance displacement measurement technology with high robustness and fault tolerance. In our previous research, using parallel light sources to illuminate the grating disk can achieve high measurement resolution and measurement accuracy. However, due to the optical path height of the transmission displacement measurement, the measurement volume cannot be further reduced in the axial direction. Therefore, a thin-volume image-type displacement measurement (IDM) was proposed here based on point light reflection. First, to reduce the volume of the measuring optical path, a reflective imaging optical path was designed using a point light. Second, to improve robustness of reflective imaging displacement measurements, an absolute encoding method was proposed based on Manchester encoding. Third, based on the encoding pattern used, a decoding and subdivision algorithm was derived. Finally, the resulting method was verified by experimentation. In these experiments, the axial height of the test measuring optical path was only 6 mm. Based on Manchester encoding, the method achieved more than 25-bit measurement resolution and $3.11^{\prime \prime }$ error standard deviation when the grating encoder at 86 mm. This research greatly reduced the optical path volume of angular displacement measurements, providing a technical basis for thin-volume and high-performance photoelectric displacement measurement.
- 22 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-7
Thin-Volume Image-Type Angular Displacement Measurement Based on Point Light Reflection
Image-type angular displacement measurement technology based on image recognition algorithm is a high-performance displacement measurement technology with high robustness and fault tolerance. In our previous research, using parallel light sources to illuminate the grating disk can achieve high measurement resolution and measurement accuracy. However, due to the optical path height of the transmission displacement measurement, the measurement volume cannot be further reduced in the axial direction. Therefore, a thin-volume image-type displacement measurement (IDM) was proposed here based on point light reflection. First, to reduce the volume of the measuring optical path, a reflective imaging optical path was designed using a point light. Second, to improve robustness of reflective imaging displacement measurements, an absolute encoding method was proposed based on Manchester encoding. Third, based on the encoding pattern used, a decoding and subdivision algorithm was derived. Finally, the resulting method was verified by experimentation. In these experiments, the axial height of the test measuring optical path was only 6 mm. Based on Manchester encoding, the method achieved more than 25-bit measurement resolution and $3.11^{\prime \prime }$ error standard deviation when the grating encoder at 86 mm. This research greatly reduced the optical path volume of angular displacement measurements, providing a technical basis for thin-volume and high-performance photoelectric displacement measurement.
- Open Access
- 21 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (6) , 6438-6445
Analysis and Elimination of Grating Disk Inclination Error in Photoelectric Displacement Measurement
As core elements of photoelectric displacement measurement, installation coaxiality and rotation parallelism are the main factors affecting measurement accuracy. When there is a processing error or an offset in the installation process of structural elements, the plane of the grating disk will be tilted, which seriously affects the accuracy of angular displacement measurements. In this study, error caused by inclination of the grating disk was analyzed and a method to eliminate this error presented. First, an error model was established by analyzing the mechanism of measurement error caused by grating disk tilting, analysis showed that the error caused by grating disk tilt showed a “double cycle” fluctuation in the circle. Then, by using “double cycle” fluctuation, a method for eliminating errors was presented. Finally, the validity of the proposed theory and method was verified by simulation and experimentation. To eliminate errors, angular displacement measurements needed to be made using at least three reading heads to produce a mean. In these experiments, when the grating disk was tilted, the error was perfectly eliminated using three reading head measurements. The experimental results verified the validity of the proposed theory, which provided a theoretical basis for improving the displacement measurement accuracy.
- 21 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (6) , 6438-6445
Open AccessAnalysis and Elimination of Grating Disk Inclination Error in Photoelectric Displacement Measurement
As core elements of photoelectric displacement measurement, installation coaxiality and rotation parallelism are the main factors affecting measurement accuracy. When there is a processing error or an offset in the installation process of structural elements, the plane of the grating disk will be tilted, which seriously affects the accuracy of angular displacement measurements. In this study, error caused by inclination of the grating disk was analyzed and a method to eliminate this error presented. First, an error model was established by analyzing the mechanism of measurement error caused by grating disk tilting, analysis showed that the error caused by grating disk tilt showed a “double cycle” fluctuation in the circle. Then, by using “double cycle” fluctuation, a method for eliminating errors was presented. Finally, the validity of the proposed theory and method was verified by simulation and experimentation. To eliminate errors, angular displacement measurements needed to be made using at least three reading heads to produce a mean. In these experiments, when the grating disk was tilted, the error was perfectly eliminated using three reading head measurements. The experimental results verified the validity of the proposed theory, which provided a theoretical basis for improving the displacement measurement accuracy.
- Open Access
- 17 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-9
Stain-Detection and Anti-Stain Algorithms Based on Dual Detector Data Interchange in Image-Type Displacement Measurement Technology
Displacement measurement technology based on image recognition algorithms represents a novel high-performance technique. In such measurements, when there are stains contaminating the measuring light path, it causes recognition errors from the linear array image sensor on the grating, resulting in inaccurate measurement results. Therefore, this report proposes stain-detection and anti-stain algorithms based on image recognition. The principle of image-type displacement measurement technology is described, and the influence of stains on the displacement measurements is analyzed according to four criteria in order to judge whether there are stains present. Then, an anti-stain algorithm based on the data exchange of dual-image sensors is proposed. Finally, experimental verifications are carried out. The experimental results show that the proposed algorithm effectively identifies the errors in the displacement measurements, when the experimental device is contaminated, the developed algorithms can accurately self-correct for the stain’s interference. The results presented herein provide a theoretical basis for developing highly-reliable displacement measurement devices.
- 17 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-9
Open AccessStain-Detection and Anti-Stain Algorithms Based on Dual Detector Data Interchange in Image-Type Displacement Measurement Technology
Displacement measurement technology based on image recognition algorithms represents a novel high-performance technique. In such measurements, when there are stains contaminating the measuring light path, it causes recognition errors from the linear array image sensor on the grating, resulting in inaccurate measurement results. Therefore, this report proposes stain-detection and anti-stain algorithms based on image recognition. The principle of image-type displacement measurement technology is described, and the influence of stains on the displacement measurements is analyzed according to four criteria in order to judge whether there are stains present. Then, an anti-stain algorithm based on the data exchange of dual-image sensors is proposed. Finally, experimental verifications are carried out. The experimental results show that the proposed algorithm effectively identifies the errors in the displacement measurements, when the experimental device is contaminated, the developed algorithms can accurately self-correct for the stain’s interference. The results presented herein provide a theoretical basis for developing highly-reliable displacement measurement devices.
- 13 April 2023
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12605, 66-316
ICS information security evaluation method based on fuzzy analytic hierarchy process
With the increasing scale of applications and system programs and the increased processing capacity of software, in order to improve the efficiency of software, more and more information-sharing technologies are adopted. There are more and more loopholes in large-scale information-sharing, mainly because of the uncertainty of information-sharing scheduling, which leads to great uncertainty in the control flow of programs. In This paper, the theory of fuzzy cooperation evaluation is applied to the research. Through the analysis of the participants in data-sharing and their fuzzy cooperation relationships, the fuzzy cooperation evaluation model of data-sharing is constructed based on the degree of participants' participation. The benefit allocation model of data-sharing subjects is constructed by using the fuzzy Shapley value and Banzhaf-Coleman right index. It provides a new research perspective and ideas for the smooth long-term practice of data-sharing and the equilibrium of its rights and interests.
- 13 April 2023
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12605, 66-316
ICS information security evaluation method based on fuzzy analytic hierarchy process
With the increasing scale of applications and system programs and the increased processing capacity of software, in order to improve the efficiency of software, more and more information-sharing technologies are adopted. There are more and more loopholes in large-scale information-sharing, mainly because of the uncertainty of information-sharing scheduling, which leads to great uncertainty in the control flow of programs. In This paper, the theory of fuzzy cooperation evaluation is applied to the research. Through the analysis of the participants in data-sharing and their fuzzy cooperation relationships, the fuzzy cooperation evaluation model of data-sharing is constructed based on the degree of participants' participation. The benefit allocation model of data-sharing subjects is constructed by using the fuzzy Shapley value and Banzhaf-Coleman right index. It provides a new research perspective and ideas for the smooth long-term practice of data-sharing and the equilibrium of its rights and interests.
- 25 November 2022
- Published by Elsevier in Optics and Lasers in Engineering
- Vol. 161
Error analysis and compensation method of displacement measurements based on reflection projection imaging
- 25 November 2022
- Published by Elsevier in Optics and Lasers in Engineering
- Vol. 161
Error analysis and compensation method of displacement measurements based on reflection projection imaging
- 19 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 71 (00189456) , 1-8
A Novel Self-Correction Method for Linear Displacement Measurement Based on 2-D Synthesis Mechanism
With increased range, the accuracy of longer-range linear displacement measurement is difficult to guarantee. According to the analysis, it is inevitable that there will be a certain margin between the direction of the calibration grating and the direction of the reading head, which will impact the longer-range linear displacement measurement. In order to eliminate this measurement error, a self-correction method based on 2-D synthesis is herein proposed. First, we describe the principle of absolute linear displacement measurement based on image recognition. Then, the error model is established, which caused by the included angle between the calibration grating and the reading head. Third, a method is proposed for obtaining the vertical offset of the calibration grating by using the vertical image sensor. Finally, we reach an error self-correction method based on 2-D synthesis. In order to test the feasibility of the proposed method, a linear displacement measuring device with a range of 200 mm was developed. After experiment, the maximum absolute error was reduced from 4.34 to $2.03~\mu \text{m}$ with the proposed error correction in the long range of 200 mm. The proposed algorithm does not depend on the assembly and installation position, and can realize self-correction of errors. So the method could lay the groundwork for improving larger range linear displacement measurement technology.
- 19 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 71 (00189456) , 1-8
A Novel Self-Correction Method for Linear Displacement Measurement Based on 2-D Synthesis Mechanism
With increased range, the accuracy of longer-range linear displacement measurement is difficult to guarantee. According to the analysis, it is inevitable that there will be a certain margin between the direction of the calibration grating and the direction of the reading head, which will impact the longer-range linear displacement measurement. In order to eliminate this measurement error, a self-correction method based on 2-D synthesis is herein proposed. First, we describe the principle of absolute linear displacement measurement based on image recognition. Then, the error model is established, which caused by the included angle between the calibration grating and the reading head. Third, a method is proposed for obtaining the vertical offset of the calibration grating by using the vertical image sensor. Finally, we reach an error self-correction method based on 2-D synthesis. In order to test the feasibility of the proposed method, a linear displacement measuring device with a range of 200 mm was developed. After experiment, the maximum absolute error was reduced from 4.34 to $2.03~\mu \text{m}$ with the proposed error correction in the long range of 200 mm. The proposed algorithm does not depend on the assembly and installation position, and can realize self-correction of errors. So the method could lay the groundwork for improving larger range linear displacement measurement technology.
- 1 February 2022
- Published by Optica Publishing Group in Applied Optics
- Vol. 61 (4) , 1049-1056
High-precision displacement measurement algorithm based on a depth fusion of grating projection pattern
Displacement measurement based on an image recognition algorithm has more advantages in the field of displacement measurement. Due to the uncertainty of image location, the accuracy of the displacement measurement algorithm studied in the previous stage is limited. To improve the accuracy of image-type displacement measurement, a high-precision displacement measurement algorithm based on depth fusion of the grating projection pattern is proposed. First, a line-scan image sensor and parallel light source are placed on both sides of the calibration grating. The marking pattern on the calibration grating is projected onto the image sensor through illumination of the parallel light source to realize the projection imaging. Then, the centroid algorithm is used to calculate the centroid of each line in the collected image, and the mean value of the centroid group is determined. Finally, a linear function is used to fit multiple centroids to calculate the endpoints of the subdivision region, and the subdivision operation is carried out according to a ratio algorithm. To test the performance of the proposed algorithm, a linear displacement measurement device with a 250 mm range and an angular displacement measurement device with a 100 mm diameter grating are both used for experiments. After testing, the linear measurement accuracy of the proposed algorithm is improved from 4.63 to 1.26 µm, and the angular displacement measurement accuracy is enhanced from 8.87 to 2.88 ′ ′ . The research in this paper provides a theoretical basis for high-performance displacement measurement.
- 1 February 2022
- Published by Optica Publishing Group in Applied Optics
- Vol. 61 (4) , 1049-1056
High-precision displacement measurement algorithm based on a depth fusion of grating projection pattern
Displacement measurement based on an image recognition algorithm has more advantages in the field of displacement measurement. Due to the uncertainty of image location, the accuracy of the displacement measurement algorithm studied in the previous stage is limited. To improve the accuracy of image-type displacement measurement, a high-precision displacement measurement algorithm based on depth fusion of the grating projection pattern is proposed. First, a line-scan image sensor and parallel light source are placed on both sides of the calibration grating. The marking pattern on the calibration grating is projected onto the image sensor through illumination of the parallel light source to realize the projection imaging. Then, the centroid algorithm is used to calculate the centroid of each line in the collected image, and the mean value of the centroid group is determined. Finally, a linear function is used to fit multiple centroids to calculate the endpoints of the subdivision region, and the subdivision operation is carried out according to a ratio algorithm. To test the performance of the proposed algorithm, a linear displacement measurement device with a 250 mm range and an angular displacement measurement device with a 100 mm diameter grating are both used for experiments. After testing, the linear measurement accuracy of the proposed algorithm is improved from 4.63 to 1.26 µm, and the angular displacement measurement accuracy is enhanced from 8.87 to 2.88 ′ ′ . The research in this paper provides a theoretical basis for high-performance displacement measurement.