Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ryan C. Hoffmann has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Temperature effect on coverglass surface charging during electron irradiation

    by Alexey N. Sokolovskiy, Elena A. Plis, Ryan C. Hoffmann

    This article examines the influence of temperature on the charging behavior of solar cells with various coverglasses under low-energy electron irradiation (5 keV). The results demonstrate that increasing temperature produces a nonlinear rise in the average discharge frequency (arc rate) on solar panels with fused silica, CMX, and CMG coverglasses. The underlying mechanisms responsible for this behavior are analyzed. Furthermore, a refined physical model is presented to describe the onset of electrostatic discharges under 4–5 keV electron exposure. The model incorporates key parameters, including glass composition, surface roughness, and the probability of electron interactions with the lateral surface of the coverglass as a function of substrate potential.

  • Arc Formation on Solar Array Surfaces Under Energetic Electron Irradiation and Vacuum Exposure

    by Alexey N. Sokolovskiy, Elena A. Plis, Ryan C. Hoffmann, Dale C. Ferguson

    The harsh space environment induces local discharges (arcs) on satellite solar panels, which can cause reduced optical transmission through solar array coverglasses, thus negatively affecting long-term satellite missions. This article presents the experimental results of low-energy (4–5 keV) electron irradiation of three common types of space solar array coverglass, CMX, CMG, and fused silica at various bias voltages. The dependence of the discharge rate on the bias voltage, coverglass composition, energy of the incident electrons, vacuum exposure, and surface conductivity was investigated. It is shown that the arc frequency is inversely related to the incident electron energy. Physicochemical models of the mechanisms occurring in different types of space array coverglasses under low-energy electron irradiation are proposed to explain the experimental findings.


  • Impact of Film Thickness on the Spectroscopic Evolution of Polyimides in a Simulated GEO Environment

    by Elena A. Plis, Vanessa G. Murray, Charles T. Hooper, Dale C. Ferguson, Miles T. Bengtson, Jainisha R. Shah, Daniel P. Engelhart, Ryan C Hoffman

    Space domain awareness (SDA) is becoming more important with a constantly increasing number of artificial objects in space. Astronomical reflectance spectroscopy (ARS) is a promising technique employed for remote characterization of space objects. In geosynchronous earth orbit (GEO), the chemical characteristics of a material change continuously, as it is exposed to the harsh radiation environment of several damaging species (with electrons being the primary damaging species in terms of energy deposition). These chemical modifications alter the light absorbed by and reflected from the object at certain wavelengths, resulting in a concomitant change of the measured object’s brightness and color index. By understanding the evolution of the color index of a material as a function of time on orbit, ARS can become a powerful tool for remote characterization of space objects as well as anomaly characterization and resolution. In this study, we investigate the effect of a space-simulated environment represented by high-energy (100 keV) electrons on the evolution of optical properties of several spacecraft-relevant polymer materials.


  • Effect of Simulated GEO Environment on the Properties of Solar Panel Coverglasses

    by Elena A. Plis, Daniel P. Engelhart, Vanessa J. Murray, Alexey N. Sokolovskiy, David A. Barton, Dale C. Ferguson, Ryan C. Hoffman

    The harsh space environment at geosynchronous orbit (GEO) induces differential charging of spacecraft surfaces due to simultaneous fluxes of electrons with a wide distribution of energies onto, into, and through spacecraft surface materials. Thus, satellite surfaces can charge thousands of volts with respect to each other, whereas entire satellites can charge tens of thousands of volts negative relative to their surrounding space plasma. The ensuing electric fields can cause local discharges (arcs) from one part of the spacecraft to another, endangering the normal operation of the satellite. Furthermore, solar cell coverglass contamination induced by the high rate of arcing is sufficient to produce the ~1.5%/year power loss in excess of radiation damage that has been observed on global positioning system (GPS) satellites. This work focuses on evaluation of a GEO space weather effect on material properties caused by irradiating different types of commonly used space solar cell coverglasses (CMX, fused silica, and Corning 0214) with >90-keV electron radiation.


  • XPS Investigation of the Source of GPS Arc Contamination

    by Daniel P. Engelhart, Elena A. Plis, Dale Ferguson, Kateryna Artyushkova, David Wellems, Russell Cooper, Ryan Hoffmann

    Global positioning system (GPS) satellites are strongly suspected to arc into the space environment. Arcing on spacecraft due to differential charging can be blamed for a host of operational anomalies resulting in the loss of billions of dollars and productivity. In addition to anomalous behavior on spacecraft, arcing can be accused of an otherwise unexplained degradation in solar power production of GPS satellites while on orbit. In the study presented here, it will be shown that arcs on a GPS-representative solar array coupon under representative medium earth orbit/geosynchronous earth orbit (MEO/GEO)-like conditions result in contamination of solar panel coverglasses. This finding supports the argument that arc-induced contamination is a prime suspect in explaining the mysterious excess power loss of GPS satellites on orbit. Further, optical mapping suggests that this arcing occurs primarily at the edges of the sample panel where silicone adhesive with glass microspheres was exposed. X-ray photoelectron spectroscopy (XPS) reveals that the concentration of Si near the arc sites is increased, suggesting that the adhesive is ionized during the electrostatic discharge and coats the surface of the solar panel, resulting in reduced optical transmission through the coverglass and therefore reducing power production. X-ray depth profiling suggests that the silicon detected is due to surface contamination, and electrostatic simulations indicate that glass microspheres intended to reduce adhesive mass and produce a uniform bond-line may be exacerbating the arcing problem.


  • Space Weathering Experiments on Spacecraft Materials

    by D. P. Engelhart, R. Cooper, H. Cowardin, J. Maxwell, E. Plis, D. Ferguson, D. Barton, S. Schiefer, R. Hoffmann


  • Open Access

    Review of Radiation-Induced Effects in Polyimide

    by Elena A. Plis, Daniel P. Engelhart, Russell Cooper, W. Robert Johnston, Dale Ferguson, Ryan Hoffmann

    Polyimide (PI, Kapton-H®) films are widely utilized in the spacecraft industry for their insulating properties, mechanical durability, light weight, and chemical resistance to radiation. Still PI materials remain exposed to a combination of high-energy electrons, protons, and ultraviolet (UV) photons, particles primarily responsible for radiation-induced damage in geosynchronous Earth orbit (GEO), which drastically change PI’s properties. This work reviews the effect of electron, proton, and UV photon irradiation on the material properties (morphology, absorption, mechanical properties, and charge transport) of PI. The different damaging mechanisms and chemical consequences that drive changes in the material properties of PI caused by each individual kind of irradiation will be discussed in detail.


  • Physical and Spectrometric Analysis of Electron-Damaged LDPE

    by Elena A. Plis, Daniel P. Engelhart, Russell Cooper, Dale C. Ferguson, Ryan C. Hoffmann

    Low-density polyethylene (LDPE) is a nonpolar polymer commonly used as an insulating material. Although its applications in the spacecraft industry are limited, LDPE is widely utilized as a model system to study electron transport through disordered insulating materials under simulated space weather conditions. The charge transport models developed using this system may then be extended to more commonly used spacecraft materials such as polyimides. Several proposed charge transport models share high complexity and many free fitting parameters. For better estimation of initial values of these free parameters, the correlation between charge transport and its chemical origins should be made. Whenever possible, experimental measurements should be used as initial values for each of the free fitting parameters to improve model accuracy. In this paper, we studied alterations of the chemical properties of LDPE after irradiation by high-energy (100 keV) electrons using Fourier transform infrared spectroscopy (FTIR) and bulk conductivity measurements. Moreover, we utilized a quadrupole mass spectrometer (QMS) to identify the ablated species released from the solid during irradiation. These measurements offer insight into the structural and chemical damages of the material. Results of the performed analysis are correlated with the underlying chemical changes that occur in LDPE during irradiation.


  • Open Access

    Arc Plasma Propagation and Arc Current Profiles

    by Dale C. Ferguson, Ryan C. Hoffmann, Elena Plis, Daniel Engelhart

    When electrical arcs occur in space, a plasma expands away from the arc-site, neutralizing adjacent surfaces (a current), and causing a current to be produced at the arc-site (source of neutralization current). The speed of this plasma expansion depends on the plasma species, which in turn depend on the ionizable materials near the initial electrostatic discharge (ESD) site. Based on laboratory experiments undertaken as part of the U.S. round-robin experiments on plasma propagation speed, a scenario for arc plasma propagation and arc current profiles is presented. It is found that the complex arc current profiles invariably seen in laboratory arcs are due to a multicomponent plasma, where each plasma species expands away from the arc-site supersonically and with approximately constant velocity. Apparent slowing of the arc plasma seen in high-speed video cameras is caused by the density depletion of the lightest (most rapid) plasma component first and heavier (slower) plasma components later. Electron currents onto surfaces originate at the arc-site, and the conductive arc plasma is a conduit for these currents. Sudden, simultaneous onset of arc currents at all distances from the arc-site is the result of blowoff currents, making all surfaces more positive, which then attract ambient electrons. Sudden, simultaneous cutoff of arc currents at all distances from the arc-site is the result of collapse of the plasma due to conditions at the arc-site. The ionization at the arc-site during the arc is seen to be rapidly variable, with variations on the nanosecond timescale. This model not only makes the varied plasma velocities reported in the literature understandable, but it also makes predictions about the arc radio-frequency interference (RFI), contamination produced by the arcs, and the total charge in an arc possible. Arc-site materials are suggested which, being hard to ionize and with massive ions, minimize arc currents and maximize arc current rise times.