HLHuawang Liu

Huawang Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Huawang Liu has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Whole-Body Path Following of an Active-Joint Active-Wheel Snake Robot Based on Head-Body Stepwise Control

    by Fuxi Wan, Xian Guo, Huawang Liu, Wei Huang, Zhong Huang

    This letter presents a two-dimensional planar path-following controller for active-joint active-wheel snake-like robots. Compared to passive-wheel snake robots, active-wheel snake robots can navigate narrower spaces and generate stronger driving forces, enabling adaptation to various terrains. However, due to the highly redundant multi-link and multi-active-wheel body configuration, achieving whole-body path following for active-joint active-wheel snake robots is challenging. To address this, we propose a head-body stepwise path-following control method based on a multi-rigid-body kinematic model to solve the problem of high degrees of freedom and the coordination between joints and wheels. First, by applying the no-side-slip constraint, we construct a multi-joint and multi-wheel kinematic model for the snake body path-following control task. Then, a motion controller is designed for the fundamental motion of the active wheeled snake robot. To achieve path following, an arbitrary path following controller is designed for turning angle. Then, the designed turning angle is substituted into the motion controller, and the angular velocity of each joint is calculated based on kinematic model. Subsequently, an incremental PID controller is designed to control the angle of each joint. Finally, the whole-body path following task of active-wheel snake-like robot can be implemented. Simulation and extensive experimental results for both curvature-continuous and curvature-discontinuous paths demonstrate the superior following performance of the proposed controller compared to the PD method and passive-joint conditions. Furthermore, the robustness of the proposed method to variations in friction is validated.


  • A Head-Orientation Stabilized Gait With 3-D Backbone Curve Shape and Raised Head for Snake Robots

    by Wei Huang, Xian Guo, Huawang Liu, Fuxi Wan, Lixing Liu, Yongchun Fang

    Head stabilization is crucial for 3-D snake robots to perceive their environment effectively using onboard vision sensors. This article proposes a head-orientation-stabilized gait that enables the snake robot to capture wide-field video with improved stability. Given the challenge of compensating for coupled swings in both directions, the snake robot is divided into a motion part and a head-raising part, as guided by the proposed design rules. The motion section suppresses body-induced disturbances while preserving off-road locomotion capability and the head-raising section uses a hook shape to broaden the camera view and reduce residual disturbances. To generate the motion part, the S-pedal gait, suited for uneven terrain, is reformulated into Frenet–Serret-based angle functions for localized body tuning without full-shape transmission. Furthermore, setting specific rolling angles leverages segment twist angles to decouple 3-D shape formation, where pitch and yaw joints generate floating and grounding arcs, respectively, enabling independent joint modulation and enhanced swing suppression. A series of experiments validates the proposed gait, with results showing satisfactory head stabilization, wider camera coverage, and improved adaptability to challenging terrain compared to existing methods.


  • NMPC-Based Obstacle Avoidance Trajectory Planning for Bionic Ray-Inspired Amphibious Robots with Dead Zone Compensation

    by Yixuan Wang, Qingxiang Wu, Xuebing Wang, Huawang Liu, Yongchun Fang, Ning Sun

    This paper focuses on a bionic ray-inspired amphibious robot (BRAR), which is modeled through the differential steering approach. A nonlinear model predictive control (NMPC) obstacle avoidance method is proposed for trajectory planning. First, a BRAR’s differential drive system is designed, followed by kinematic and dynamic modeling. Subsequently, an NMPC-based obstacle avoidance trajectory planning method is developed to constitute safe trajectories in complex workspaces. Further, a dead zone compensation method is proposed to improve control precision. Finally, the effectiveness of the proposed method is validated through both simulations and experiments. Simulation and experimental results demonstrate the feasibility and effectiveness of the proposed methods.

  • Adaptive Output Feedback Trajectory Tracking Control of an Indoor Blimp: Controller Design and Experiment Validation

    by Jinyang Dong, Hai Yu, Biao Lu, Huawang Liu, Yongchun Fang

    Due to its safety and the flight duration, the indoor blimp robot is an ideal choice for cruise monitoring and inspection. In this article, the robust trajectory tracking problem for a helium-filled blimp is investigated to enhance its adaptability within indoor environments. Specifically, the echo state network (ESN) is employed to estimate the external disturbances and parameter uncertainties experienced by the blimp. To address the issue of unreliable measured velocities, an ESN-based state observer which uses output feedback signals is designed to estimate velocities. Moreover, a tan-type asymmetric barrier Lyapunov function (BLF) is proposed to cope with the time-varying error constraints. All signals in the closed-loop system are proven to be globally ultimately uniformly bounded through Lyapunov techniques. Finally, a series of hardware experiments are conducted on a self-built indoor blimp platform, which demonstrates the effectiveness of the proposed trajectory tracking control scheme.


  • Precise Motion Control for Self-Reconfiguration Wave-Like Crawling Robots in Parallel Connection With Limited Resources

    by Haosheng Sun, Qingxiang Wu, Huawang Liu, Yongchun Fang, Ning Sun

    Mobile robots face significant challenges in traditional fixed structure limitations, particularly in complex terrains and tasks. To solve the above-mentioned problem, self-reconfiguration wave-like crawling (SWC) robots are designed to perform complex tasks efficiently through physical connections and move across various surfaces. In addition, the parallel connection is designed to facilitate differential steering and enhance the robot's load-bearing capacity. Since autonomous robots have limited resources, including computation, communication, and energy, reducing resource usage to the fullest extent possible is crucial while maintaining control performance. Therefore, a precise motion controller is proposed for SWC robots in parallel connection. Specifically, the kinematic model of the SWC robots in parallel connection is established and transformed into a trajectory-tracking error model. Then, a continuous-time optimal motion control law is designed to achieve stable trajectory-tracking with reduced control energy. In addition, a self-triggered mechanism is introduced with a significant advancement in reducing sensor sampling and saving resource costs. These merits are validated through an IoT-based (Internet of Things) self-built hardware experimental platform, demonstrating a significant resource-saving potential over traditional periodic control methods.


  • A Unified Motion Modeling Approach for Snake Robot's Gaits Generated With Backbone Curve Method

    by Wei Huang, Yongchun Fang, Xian Guo, Huawang Liu, Lixing Liu

    In this paper, a unified motion modeling approach for the 3-D snake robot is proposed, which enables motion prediction of all kinds of gaits generated by the backbone curve method on the ground. More specifically, the motion of the snake robot is novelly decomposed into two components, namely the curve component and the shift component, which are explicitly related to the backbone curve's parameters and control's input. Considering the actual behavior of snake robots, a non-slip assumption is made to facilitate the modeling approach. Based on that, the ground-contacting points of the robot's link during shift control are conveniently analyzed, which helps to determine the moving direction of the curve components. Finally, with ground contacting points and backbone curve parameters determined, the characteristics of the two components, as well as the motion model, are successfully obtained. Utilizing this modeling approach, the widely used gaits, such as sidewinding, crawler, and S-pedal, are successfully modeled and then carefully analyzed to predict the movement of the snake robot with arbitrary given control input. Three groups of experiments are conducted, with the collected results showing the satisfactory accuracy of the obtained models. Compared with existing methods, the proposed modeling approach achieves a much more precise prediction, both in the direction and magnitude of snake robot motions.


  • NKhex: A New Miniature Hexapod Crawling Robot With Visual Perception and Target Tracking

    by Yinan Wu, Haoyue Deng, Huawang Liu, Xingqi Zhao, Yongchun Fang

    Scaling a large crawling robot to the centimeter-level size is a major technical challenge, which mainly includes the research on mechanical structure design, independent battery life, maneuverability, and perception. For most miniature crawling robots, it is difficult to synchronously balance the aspects of simple structure, good maneuverability, and visual perception. Aiming at such problems, this article designs a composite-cam-driven miniature hexapod crawling robot, named NKhex, with the abilities of visual perception and target tracking. The size of the microrobot is centimeter-level, and only two micromotors are used as drivers. The tripod gait motion of the robot can be realized with the six outriggers through the composite cam transmission mechanism. The robot is equipped with a miniature camera and has the functions of visual perception and object recognition via training neural networks, based on which it can achieve trajectory tracking and moving target tracking through closed-loop control. Besides, the robot is able to crawl and turn quickly in narrow space and outdoor environment, thus presenting potential applications in emergency rescue and data collection in dangerous areas. Sufficient experiments are carried out to verify the motion performance and perception ability of the robot.


  • A Novel Design Methodology of CPG Model for a Salamander-Like Robot

    by Yang Liu, Zhiang Liu, Yongchun Fang, Huawang Liu, Xian Guo

    In this letter, we present a novel method for the design of central pattern generator (CPG) model, and then utilize it to control a salamander-like robot. The CPG network is composed of modified Hopf oscillators with a new coupling scheme that independently controls the waveform regulation and phase coordination process. To improve the accuracy of waveform regulation, corresponding coupling weight parameters are dynamically adjusted using an adaptive learning rule, and ultimately reach their critical value. Besides, the CPG network can achieve fast convergence by employing this critical value with an updating rule. Afterward, the designed model is utilized to develop a control strategy for the salamander-like robot, involving gait characterization and foot trajectory generation. The control strategy is capable of producing several terrestrial gaits with smooth transitions among them. Finally, numerical simulation and hardware experiments are performed to demonstrate the validity of the proposed method. Moreover, this method can be applied to a variety of biologically inspired robots, where asymmetric oscillation signals with phase coordination are necessary.


  • A Robust Model-Based Radius Estimation Approach for Helical Climbing Motion of Snake Robots

    by Wei Huang, Xian Guo, Huawang Liu, Yongchun Fang

    In this article, a radius estimation approach for snake robot's helical climbing motion is proposed, which enables a snake robot successfully implementing compliant helical climbing along pipes/trees with varying radius. More specifically, a mathematical model is first set up to describe the relationship between the helical rolling gait and the radius information. Based on the model, a robust radius estimation approach, consisting of two important stages of multistep calculation and curve fitting, is then proposed, which utilizes the measurements of joint angles as feedback to generate an accurate estimation for the radius of pipes/trees. Utilizing the estimation result, a control algorithm is then employed to make the robot climb along pipes/trees successfully, even when the radius changes over time. Some experimental results are collected and then analyzed to show the superior performance of the proposed robust model-based radius estimation approach.


  • Unmanned Aerial Transportation System With Flexible Connection Between the Quadrotor and the Payload: Modeling, Controller Design, and Experimental Validation

    by Xiao Liang, Hai Yu, Zhuang Zhang, Huawang Liu, Yongchun Fang, Jianda Han

    Aerial delivery is becoming a reality due to the development of microelectronics and communication technology. Most existing methods for cable-suspended transportation systems utilize fixed-length cable to connect the unmanned aerial vehicle quadrotor and the payload. Such aerial transportation systems present underactuated property, which is caused by the indirectly controllable payload motion and the underactuation of the quadrotor itself. In practical applications, payload hoisting and lowering motion independent of the quadrotor altitude will further expand the application scope in such areas as limited space crossing and offshore sample collection. To realize the aforementioned objectives, a flexible connection between the quadrotor and the payload is realized by mounting an actuator beneath the fuselage. Suffering from strong nonlinearity and complex dynamic coupling, the control problem becomes extremely challenging and more cumbersome, as the system’s degree of freedom (DOF) increases. To deal with these problems, in this article, a nonlinear control approach is presented by energy-based analysis, which achieves simultaneous quadrotor positioning, payload swing elimination and hoisting / lowering. Lyapunov techniques and LaSalle’s Invariance theorem are utilized to prove the asymptotic convergence of the equilibrium point. Finally, a series of hardware experiments are conducted on a self-built aerial transportation platform. As far as we know, this article provides the first mechanism and control solution for payload hoisting/lowering independent of the quadrotor altitude.