Zhang Xiaotong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Zhang Xiaotong has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Jianying Li
State Key Laboratory of Electrical Insulation and Power Equipment, Xian Jiaotong University, Xian, China
4 shared publications - Kangning Wu
State Key Laboratory of Electrical Insulation and Power Equipment
3 shared publications - Tao Ding
School of Electrical Engineering, Xi’an Jiaotong University, Xi’an 710049, China
3 shared publications - Mohammad Shahidehpour
Illinois Institute of Technology
2 shared publications - Xiangqian Tong
School of Electrical Engineering, Xi’an University of Technology, Xi’an 710048, China
2 shared publications - Yujie Ding
Electric Power Research Institute, State Grid Qinghai Electric Power Company, Xining, China
2 shared publications
Latest Publications
- 12 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. PP (15513203) , 1-11
A Physics-Guided LSTM-TL Based Thermal Neural Network for Temperature Prediction in IGBT Modules
Accurately estimating the junction and critical material layer temperatures of insulated gate bipolar transistor (IGBT) modules is essential to prevent equipment damage from IGBT overheating, and minimize maintenance expenses. Existing data-driven models suffer from limited comprehensibility and poor physical interpretability. To address this issue, a fusion neural network is proposed, which integrates long short-term memory (LSTM) with fundamental heat transfer physics for IGBT module temperature prediction. First, we examine the heat transfer processes within the module and embed the underlying physical principles into a deep learning architecture. This approach resolves the parameter dependency issues inherent in conventional thermal network models by incorporating physical loss constraints and LSTM network. Second, transfer learning (TL) is employed to fine-tune the LSTM network, integrating experimental data to enhance the alignment between simulation results and actual observations. Consequently, the proposed neural network model achieves enhanced transparency and interpretability. Experimental validation demonstrates that compared with finite element method simulation and LSTM network, the thermal neural network based on physics-guided LSTM-TL significantly reduces prediction errors to 0.13%–0.21% while enhancing generalization performance.
- 12 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. PP (15513203) , 1-11
A Physics-Guided LSTM-TL Based Thermal Neural Network for Temperature Prediction in IGBT Modules
Accurately estimating the junction and critical material layer temperatures of insulated gate bipolar transistor (IGBT) modules is essential to prevent equipment damage from IGBT overheating, and minimize maintenance expenses. Existing data-driven models suffer from limited comprehensibility and poor physical interpretability. To address this issue, a fusion neural network is proposed, which integrates long short-term memory (LSTM) with fundamental heat transfer physics for IGBT module temperature prediction. First, we examine the heat transfer processes within the module and embed the underlying physical principles into a deep learning architecture. This approach resolves the parameter dependency issues inherent in conventional thermal network models by incorporating physical loss constraints and LSTM network. Second, transfer learning (TL) is employed to fine-tune the LSTM network, integrating experimental data to enhance the alignment between simulation results and actual observations. Consequently, the proposed neural network model achieves enhanced transparency and interpretability. Experimental validation demonstrates that compared with finite element method simulation and LSTM network, the thermal neural network based on physics-guided LSTM-TL significantly reduces prediction errors to 0.13%–0.21% while enhancing generalization performance.
- 7 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 62 (2) , 3660-3672
Enhancing the Radiality Constraint for Multi-Period Restoration and Repair Model With Optimal Number of Islands in Active Distribution Networks
Maintaining the radial topology during the system restoration is vital to ensure the resilience of distribution networks. This paper proposes a multi-period restoration and repair model that considers an optimal number of islands after N-k contingencies in active distribution networks, allowing islands to dynamically merge during both restoration and line repair processes. Considering the variable network topology during restoration, a novel radiality constraint is proposed to explicitly characterize the relationship between the states of lines and buses, reducing redundant islands and improving overall network resilience. Through case studies on multiple IEEE test systems and a practical 2121-bus network, the model demonstrates a 54% higher load restoration rate, and achieves full recovery 30% faster than fixed-island models. The capability of the proposed model is shown to maintain radial topology and the effectiveness for launching the multi-period restoration.
- 7 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 62 (2) , 3660-3672
Enhancing the Radiality Constraint for Multi-Period Restoration and Repair Model With Optimal Number of Islands in Active Distribution Networks
Maintaining the radial topology during the system restoration is vital to ensure the resilience of distribution networks. This paper proposes a multi-period restoration and repair model that considers an optimal number of islands after N-k contingencies in active distribution networks, allowing islands to dynamically merge during both restoration and line repair processes. Considering the variable network topology during restoration, a novel radiality constraint is proposed to explicitly characterize the relationship between the states of lines and buses, reducing redundant islands and improving overall network resilience. Through case studies on multiple IEEE test systems and a practical 2121-bus network, the model demonstrates a 54% higher load restoration rate, and achieves full recovery 30% faster than fixed-island models. The capability of the proposed model is shown to maintain radial topology and the effectiveness for launching the multi-period restoration.
- 18 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Systems
- Vol. 41 (2) , 1522-1534
Eigenvalue-Based Hidden Convexity Algorithm for Radial Distribution Network Optimization With Non-Convex Power Flow Equations
Distribution network optimization is represented by non-convex power flow equations, where traditional convex relaxation methods may lead to inaccurate or infeasible solutions. To effectively solve the non-convex optimization problem, an eigenvalue-based hidden convexity (EBHC) algorithm is proposed for radial distribution network optimization with continuous variables and separable objectives. Specifically, the original nonconvex problem is reformulated within a standard ADMM framework by separating the convex and non-convex components of the quadratic equality constraints. The convex component is represented as a centralized second-order cone programming (SOCP) problem that can be efficiently solved, while the non-convex component is decomposed into multiple sub-problems, each taking the form of a quadratic program with a single quadratic constraint. Each sub-problem exhibits a special mathematical structure, enabling parallel solution via multiple generalized eigenvalue problems (GEPs). The theoretical guarantees of the algorithm rely on the assumption that Slater's condition holds and that the network is radial. Through iterative coordination between the convex and non-convex components, the non-convex quadratic equality constraints are strictly satisfied. Numerical experiment results demonstrate the effectiveness and accuracy of the proposed algorithm.
- 18 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Systems
- Vol. 41 (2) , 1522-1534
Eigenvalue-Based Hidden Convexity Algorithm for Radial Distribution Network Optimization With Non-Convex Power Flow Equations
Distribution network optimization is represented by non-convex power flow equations, where traditional convex relaxation methods may lead to inaccurate or infeasible solutions. To effectively solve the non-convex optimization problem, an eigenvalue-based hidden convexity (EBHC) algorithm is proposed for radial distribution network optimization with continuous variables and separable objectives. Specifically, the original nonconvex problem is reformulated within a standard ADMM framework by separating the convex and non-convex components of the quadratic equality constraints. The convex component is represented as a centralized second-order cone programming (SOCP) problem that can be efficiently solved, while the non-convex component is decomposed into multiple sub-problems, each taking the form of a quadratic program with a single quadratic constraint. Each sub-problem exhibits a special mathematical structure, enabling parallel solution via multiple generalized eigenvalue problems (GEPs). The theoretical guarantees of the algorithm rely on the assumption that Slater's condition holds and that the network is radial. Through iterative coordination between the convex and non-convex components, the non-convex quadratic equality constraints are strictly satisfied. Numerical experiment results demonstrate the effectiveness and accuracy of the proposed algorithm.
- 11 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (11) , 6161-6169
An IGBT Boundary-Dependent Thermal Network Considering External Cooling Conditions and Thermal Coupling Effect
Thermal networks show superiority in temperature estimation of insulated gate bipolar transistor (IGBT) modules for reliability assessment. Unfortunately, the deteriorated thermal behaviors of actual radiators, such as water-cooled radiators, are not reflected due to the simplification for the external cooling conditions of IGBT modules, leading to the inaccuracy of thermal networks. This article proposes an IGBT boundary-dependent thermal network considering external cooling conditions and thermal coupling effect, which guarantees the accuracy with the consideration for the external cooling conditions provided by actual water-cooled radiator. The impact of blockage on velocity in the water-cooled radiator is primarily analyzed. The convective heat transfer process, which is dependent on initial velocity, blockage degree, and coolant material properties, is clarified. By analyzing the convective heat transfer process and thermal coupling effect, the thermal impedances are derived and can be easily extracted from finite-element method (FEM) simulations. The thermal behavior of the water-cooled radiator with blockage is characterized by the thermal impedances dominated by the initial velocity and blockage degree. The accuracy of the proposed boundary-dependent thermal network is verified by experiments.
- 11 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (11) , 6161-6169
An IGBT Boundary-Dependent Thermal Network Considering External Cooling Conditions and Thermal Coupling Effect
Thermal networks show superiority in temperature estimation of insulated gate bipolar transistor (IGBT) modules for reliability assessment. Unfortunately, the deteriorated thermal behaviors of actual radiators, such as water-cooled radiators, are not reflected due to the simplification for the external cooling conditions of IGBT modules, leading to the inaccuracy of thermal networks. This article proposes an IGBT boundary-dependent thermal network considering external cooling conditions and thermal coupling effect, which guarantees the accuracy with the consideration for the external cooling conditions provided by actual water-cooled radiator. The impact of blockage on velocity in the water-cooled radiator is primarily analyzed. The convective heat transfer process, which is dependent on initial velocity, blockage degree, and coolant material properties, is clarified. By analyzing the convective heat transfer process and thermal coupling effect, the thermal impedances are derived and can be easily extracted from finite-element method (FEM) simulations. The thermal behavior of the water-cooled radiator with blockage is characterized by the thermal impedances dominated by the initial velocity and blockage degree. The accuracy of the proposed boundary-dependent thermal network is verified by experiments.
- 6 March 2025
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 36 (3) , 036148
Correntropy weighted robust Kalman filter for integrated navigation system with time varying noise covariance
To handle the influence of historical data on state estimation, this study proposes a correntropy-weighted robust Kalman filter (CWRKF). The proposed method investigates the weight using the correntropy based on the current residual, thus suppressing the impact of historical data on system state estimation. In addition, an adaptive kernel bandwidth is defined for correntropy to avoid excessive use of the current residual and accuracy degradation. Further, the correntropy-weighted system noise covariance estimation is obtained and embedded into the Kalman filter. The proposed CWRKF is verified by simulations, and the results demonstrate the superiority of the proposed CWRKF in state estimation under time-varying system noise covariance conditions over the existing approaches.
- 6 March 2025
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 36 (3) , 036148
Correntropy weighted robust Kalman filter for integrated navigation system with time varying noise covariance
To handle the influence of historical data on state estimation, this study proposes a correntropy-weighted robust Kalman filter (CWRKF). The proposed method investigates the weight using the correntropy based on the current residual, thus suppressing the impact of historical data on system state estimation. In addition, an adaptive kernel bandwidth is defined for correntropy to avoid excessive use of the current residual and accuracy degradation. Further, the correntropy-weighted system noise covariance estimation is obtained and embedded into the Kalman filter. The proposed CWRKF is verified by simulations, and the results demonstrate the superiority of the proposed CWRKF in state estimation under time-varying system noise covariance conditions over the existing approaches.
- Open Access
- 20 June 2023
- Published by Institution of Engineering and Technology (IET) in High Voltage
- Vol. 8 (6) , 1264-1274
A direct bonding copper degradation monitoring method for insulated gate bipolar transistor modules: Boundary‐dependent thermal network combined with feedback control
The direct bonding copper (DBC) substrates of insulated gate bipolar transistor (IGBT) modules degrade inevitably under cycling thermo‐mechanical stress, causing potential threat to the reliability of IGBT modules. However, little attention has been paid to monitoring their degradation. This paper proposes a DBC degradation monitoring method for IGBT modules, which combines boundary‐dependent thermal network and feedback control. A thermal network is employed to describe the internal material degradation of IGBT modules and can be extracted from a finite‐element method model. The boundary conditions including power losses and DBC degradation are considered, enabling the thermal network suitable for various working conditions and different DBC degradation conditions of IGBT modules. The DBC degradation is characterised by its equivalent thermal conductivities measured in the thermal cycling ageing experiments. On the basis of the boundary‐dependent thermal network, feedback control is applied to monitor DBC degradation by regulating boundary‐dependent thermal impedances. Finally, the proposed model is verified from the effectiveness and accuracy of DBC degradation monitoring and junction temperature calculation. This method casts new light on thermal network modelling and could provide a feasible method for the monitoring of DBC degradation.
- 20 June 2023
- Published by Institution of Engineering and Technology (IET) in High Voltage
- Vol. 8 (6) , 1264-1274
Open AccessA direct bonding copper degradation monitoring method for insulated gate bipolar transistor modules: Boundary‐dependent thermal network combined with feedback control
The direct bonding copper (DBC) substrates of insulated gate bipolar transistor (IGBT) modules degrade inevitably under cycling thermo‐mechanical stress, causing potential threat to the reliability of IGBT modules. However, little attention has been paid to monitoring their degradation. This paper proposes a DBC degradation monitoring method for IGBT modules, which combines boundary‐dependent thermal network and feedback control. A thermal network is employed to describe the internal material degradation of IGBT modules and can be extracted from a finite‐element method model. The boundary conditions including power losses and DBC degradation are considered, enabling the thermal network suitable for various working conditions and different DBC degradation conditions of IGBT modules. The DBC degradation is characterised by its equivalent thermal conductivities measured in the thermal cycling ageing experiments. On the basis of the boundary‐dependent thermal network, feedback control is applied to monitor DBC degradation by regulating boundary‐dependent thermal impedances. Finally, the proposed model is verified from the effectiveness and accuracy of DBC degradation monitoring and junction temperature calculation. This method casts new light on thermal network modelling and could provide a feasible method for the monitoring of DBC degradation.
- Open Access
- 16 June 2023
- Published by Taylor & Francis
- p. 28-43
Paradigm Shifts in Economic Statecraft Over Time
Chapter 2 compares the historical practices of economic statecraft by great powers, from modern times to World War II. The exploration expands from the city-states of Italy to the Netherlands, Britain, Germany, Russia (later the Soviet Union), Japan, and the United States. It also summarizes the four major paradigms of economic statecraft since modern times, namely, mercantilism, liberalism, imperialism, and Marxism.
- 16 June 2023
- Published by Taylor & Francis
- p. 28-43
Open AccessParadigm Shifts in Economic Statecraft Over Time
Chapter 2 compares the historical practices of economic statecraft by great powers, from modern times to World War II. The exploration expands from the city-states of Italy to the Netherlands, Britain, Germany, Russia (later the Soviet Union), Japan, and the United States. It also summarizes the four major paradigms of economic statecraft since modern times, namely, mercantilism, liberalism, imperialism, and Marxism.
- Open Access
- 16 June 2023
- Published by Taylor & Francis
- p. 9-27
Economic Statecraft – Concepts and Theories
Chapter 1 introduces the concepts and a new theory of economic statecraft. The meaning and connotation of the term “economic statecraft” has evolved over time. As such, in the first chapter of this book, it is worth examining the concept, reviewing established theories, and seeking theoretical innovation based on a critique of existing theory.
- 16 June 2023
- Published by Taylor & Francis
- p. 9-27
Open AccessEconomic Statecraft – Concepts and Theories
Chapter 1 introduces the concepts and a new theory of economic statecraft. The meaning and connotation of the term “economic statecraft” has evolved over time. As such, in the first chapter of this book, it is worth examining the concept, reviewing established theories, and seeking theoretical innovation based on a critique of existing theory.
- Open Access
- 16 June 2023
- Published by Taylor & Francis
- p. 79-98
The EU's Economic Statecraft
Chapters 3, 4, and 5 deal with case studies on economic statecraft in the United States, the EU, and China, respectively. Chapter 4 provides a historical overview on the research and practice of the EU’s economic statecraft.
- 16 June 2023
- Published by Taylor & Francis
- p. 79-98
Open AccessThe EU's Economic Statecraft
Chapters 3, 4, and 5 deal with case studies on economic statecraft in the United States, the EU, and China, respectively. Chapter 4 provides a historical overview on the research and practice of the EU’s economic statecraft.
- Open Access
- 16 June 2023
- Published by Taylor & Francis
- p. 44-78
America's Economic Statecraft
Chapters 3, 4, and 5 deal with case studies on economic statecraft in the United States, the EU, and China, respectively. Chapter 3 reviews US economic statecraft since its founding.
- 16 June 2023
- Published by Taylor & Francis
- p. 44-78
Open AccessAmerica's Economic Statecraft
Chapters 3, 4, and 5 deal with case studies on economic statecraft in the United States, the EU, and China, respectively. Chapter 3 reviews US economic statecraft since its founding.