VZValerii Zozulia

Valerii Zozulia

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Valerii Zozulia has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Planar hybrid heterostructures on the monolayer – GaN system

    by O. V. Botsula, K. H. Prykhodko, V. O. Zozulia, D. O. Shtoda

    Background. Graphene-like two-dimensional (2D) materials as promising for creating the future element base of electronics are considered. Interactions between layers of two-dimensional materials are not limited by chemical bonding and matching of the interfacial lattice. It is permitted to form heterojunctions both from different 2D materials and hybrid 2D/3D heterojunctions, having many unique characteristics and opportunities for application. One of the actual tasks is to study 2D/3D heterojunctions, and possibility of their usage as elements of electronic devices to improve or change their properties. The aim of the work. The aim of study is to determine characteristics of planar diodes based on bulk materials (GaN), in which monolayers act as structural elements forming a 2D/3D heterojunction with a diode channel. Techniques and Methodology. Mathematical simulation of charge transfer processes is carried out applying a two-dimensional model of a planar diode by using Ensemble Monte Carlo technique. Since the main mechanism of charge carrier redistribution between regions of different sizes was considered to be transitions involving phonons, a channel based on molybdenum dichalcogenide (MoS2), which forms a heterojunction with GaN - diode channel, was analyzed. The peculiarities of the space charge regions formation near 2D/3D - heteroboundaries are analyzed. Static characteristics of diodes were determined. Results Charge carriers distributions in the diode channel according to the ratio of the impurity concentration in the monolayer and the channel were obtained in the course of the research. Influence of the monolayer on average concentration of electrons in the channel was studied. Dependences of current on applied voltage in a diode with a monolayer is obtained. A significant effect on charge transfer processes in the diode channel was established which can be achieved when the doping level of the GaN-based channel does not exceed 4·1022 m-3. Conclusions: The main factors affecting on the total current of a planar diode with a 3D/2D heterojunction are the parameters of the bulk part of the diode, the channel width and the doping level leading to the appearance of depleted GaN layer bordering the monolayer.

  • Open Access

    Characteristics of noise diodes with a graded-gap cathode accounting for self-heating effects

    by V. O. Zozulia, K. H. Prykhodko

    Background. There are a number of limitations to obtaining the generation of electromagnetic oscillations at high frequencies and for functional application of solid-state electronic devices. Physical limitations, and the inertia of key processes to be determinate its operation, are often an obstacle to achieving the appropriate operating frequency or the desired functionality. The use of graded materials and their successful integration into in a device structure, such as bipolar heterotransistors or intervalley electron transfer diodes, can often ensure the obtaining of appropriate characteristics. The application of graded materials allows us to improve the frequency characteristics of devices. It is relevant for the creation of active elements intended for the generation of complex noise signals. Purpose of Work. The aim of the work is the development of a GaN-based active element with an InGaN-based graded gap mesa structure, and evaluation of their characterization. Techniques and Methodology. To simulate the operation of the diode and obtain its characteristics, the Ensemble Monte Carlo method was applied. It involved into a procedure for determining of temperature distribution and took into account the thermal properties of the contact regions (cathode, anode and substrate). Results. A GaN-based active element for a wide frequency range is proposed. The diode structure consists of a conductive channel with a cathode mesa structure based on a graded-gap InGaN layer and two ohmic contacts to the cathode and anode. The direct current diode characteristics are obtained. The conditions to obtaining of the required electric field distribution in the diode cathode are examined Conclusions: The characteristics of a GaN-based active element with graded InGaN mesa structures at the cathode were obtained by using Monte Carlo simulation. Electric field stabilization and impact ionization can be obtained in the structure was shown. The structure may be used for wide frequency noise generation.

  • Effect of Temperature on Noise Graded InGaN Diode Characteristics

    by Kyrylo Prykhodko, Valerii Zozulia, Oleg Botsula, Larysa Sichevska

    Solid-state noise signal sources are utilized in various systems for both civilian and military applications. One mechanism that leads to noise fluctuation

  • Open Access

    The impact of temperature on heterocathode noise diodes characteristics

    by O. V. Botsula, K. H. Prykhodko, V. O. Zozulia

    Background. The creation of compact noise sources in a wide frequency range, capable of invariance and reproducibility characteristics over time and external conditions, is an urgent task in the telecommunications and security field, in particular, as reference signal sources for measuring the noise characteristics of amplifiers and receivers. One of the devices that can satisfy the requirements for noise sources are diodes with a cathode static domain (DCSD). An important factor that affects the characteristics of semiconductor devices is temperature and self-heating. Purpose of Work. The aim of the work is to study the effect of temperature and self-heating on the characteristics of DCSDs containing a graded-band layer based on nitride compounds. Techniques and Methodology. Diode characteristics are obtained by numerical modeling of carrier transfer processes in two-dimensional semiconductor structures using the ensemble Monte Carlo method. Substantial mechanisms of scattering of charge carriers are taken into account. The work calculates the dependences of the current density on different values of the constant bias voltage on the diode and on different temperatures with and without taking into account heating. The phonon model was used to describe the heating processes in the selected diodes. Results. The dependences of the current density on the applied supply voltage were obtained for various DCSD doioded with a graded band AlGaN cathode under the conditions of a different constant temperature and taking into account the of self-heating effects. It is shown that an increase in temperature leads to a decrease in the diode current density. The self-heating effect is shown can significantly limite the operating voltage range of the diode. Conclusions: The effect of temperature on the operation of diodes based on AlGaN with a graded gap heterocathode is demonstrated. An increase in temperature leads to a limitation of the working voltages of the diode and, under the conditions of impact ionization, can lead to the destruction of the diode.

  • The impact of doping on the efficiency of GaAs –diode with active graded GaInAs side border

    by V. O. Zozulia, O. V. Botsula, K. H. Prykhodko

    Background. The development of modern communication, security, and medical systems requires compact terahertz radiation sources that can operate under normal conditions. One of the most promising devices is solid-state electronics, namely, Gunn diodes. Gunn diodes are quite miniature devices capable of generating microwave current oscillations under normal conditions, but to generate in the sub-terahertz and terahertz range, they need to be modified to eliminate physical limitations that prevent generation in these ranges. Purpose of Work. The aim of this work is to study the effect of the dopant concentration on the static and dynamic characteristics of a planar Gunn diode with a graded gap active side boundary. Techniques and Methodology. To obtain the characteristics of the diode, the charge transfer processes in it are numerically modeled using the ensemble Monte Carlo method, taking into account all relevant scattering mechanisms and the process of shock ionization. The paper calculates the current density dependences at different values of the DC voltage across the diode, and determines the efficiency and AC power optimized by the operating voltage across the diode when the diode is in the generation mode. All calculations are carried out for different concentrations of the donor impurity in the diode channel and in the active side boundary at the resonator frequencies of 200 GHz and 250 GHz. Results: The existence of optimal concentrations and the ratio between the concentrations in the diode channel and the side boundary are shown. The maximum value of efficiency corresponds to a concentration in the channel of about 1017 cm-3 and the concentration of the donor doping in the active side boundary of 2·1016 cm-3 at frequency 250 GHz are demonstrated. Conclusions: Optimal doping concentration for Gunn diode of 1,28 µm with a graded gap active side boundary is above 1017 cm-3 in diode channel, and at about 2·1016 cm-3 in ASB. It is possible to give optimal generation condition at maximal frequency of diode.

  • Features of impact ionization occuring in semiconductor compaunds InGaN and InAlN

    by K. H. Prykhodko, O V. Botsula, V. O. Zozulia

    Background. The unique spectral position of terahertz range determines the difficulties of developing compact solid-state sources of terahertz radiation. In most cases, the operating frequencies of existing devices are displaced in the terahertz part of the spectrum. It is known that impact ionization, especially in its initial stage, is a rather fast process that can be used to improve the devices frequency properties. The temporal and spatial restrictions of impact ionization in InGaN and InAlN compounds need to be evaluated to determine the prospects of its use for the terahertz range devices design. Purpose of Work. The aim of this work is to determine the values of time and space delays in the development of electron-initiated impact ionization in the InGaN and InAlN semiconductor compounds at the initial stage of impact ionization. Techniques and Methodology. The modeling of electronic transport was performed using the Ensemble Monte Carlo technique. It takes into account the all actual mechanisms of scattering іincluding the alloy potential scattering and impact ionization. The constant electric field approximation has been considered. The homogeneous materials and the materials with composition depending on coordinate were considered. The spatial distributions of impact ionization acts for a charge carriers ensemble were analyzed to determine a characteristic mean distance a carrier travels before ionizing ("dead space") and a delay time of impact ionization appearing. Results. The delay times of impact ionization in InGaN and InAlN compounds if electric field strengths greater than 100 kV/cm are less than 2 ps. Delay times can be an order of magnitude lower when Ga and Al content less than 60%, respectively in InGaN and InAlN. The mean distance a carriers acquire enough energy to impact ionize for this case are about 100-200 nm. This distance decrease with increasing electric field strength and may be less than 50 nm in the case of the InAlN. The dead space length can be changed by using a graded band layer in which the band gap decreases towards the anode. But the smallest values of the "dead space" correspond to homogeneous materials. Conclusions: Thus, impact ionization at the initial stage can be used in ultrahigh-frequency devices in the terahertz range, in particular, as a mechanism of energy relaxation.


  • Monte Carlo Modeling of the Diodes with Lateral Resonant Tunneling Border

    by O.V. Botsula, K. H. Prykhodko, V. O. Zozulia

    Diodes with resonant tunneling border (RTB) are studied as possible high speed and wide-band devices. The diodes represent planar two-terminal n + -n-n + -GaAs-based structures containing the lateral active border as a AlGaAs/GaAs double barrier resonant tunneling structure connected to anode contact. The 2-D model of electron transport in the device is proposed. The analysis of the diodes operation was performed using ensemble Monte Carlo technique. Transfer matrix approach for simulation of tunneling transfer is applied. The influence of parameters of the diode structure such as a position of RTB, a composition of AlGaAs barriers and a material doping on current - voltage characteristics of diode has been investigated.


  • Graded band gap InGaAs diodes for terahertz applications

    by K. H. Prykhodko, V. O. Zozulia, O. V. Botsula

    The short length and graded gap of InGaAs-based diodes with impact ionization are considered. Diode peculiarity is defined by usage region with varying composition. The analysis of diodes operation is performed by Monte Carlo technique. Influence of doping and composition profile on current-voltage characteristic of diode is investigated. The possibility of same direct motion of both types of charge carriers in the case of impact ionization is considered. Parameters that can lead to existing of the pointed regime are evaluated. Estimation of frequency properties of the discussed diodes is carried out.