Hua Tang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hua Tang has a total of 251 co-authors. Here are the top co-authors by number of shared publications:
Lele Wang
9 shared publicationsQinqin Liu
9 shared publications- Qinqin Liu
School of Materials Science and Engineering, Jiangsu University, Zhenjiang, P. R. China
9 shared publications Ze Luo
Qingdao University
9 shared publications- Haibo Huang
Qingdao University
8 shared publications Hongwen Zhang
School of Environment and Geography Qingdao University Qingdao Shandong People's Republic of China
5 shared publications
Latest Publications
- Open Access
- 9 September 2026
- Published by Wiley in Advanced Sustainable Systems
- Vol. 10 (9) , e70654
Oxygen‐Vacancy‐Mediated Evolution from MoO 3 /CdMoO 4 Type‐II to MoO 3‐x /Ov−CdMoO 4 S‐Scheme Heterojunctions for Enhanced Photocatalytic H 2 Evolution
Constructing semiconductor heterojunctions has been widely recognized as an effective strategy for enhancing photocatalytic performance. However, rational regulation of interfacial charge‐transfer pathways, particularly the controllable transformation from conventional Type‐II to direct S‐scheme heterojunctions, remains a fundamental challenge. Herein, an oxygen‐vacancy‐rich MoO 3‐x /Ov‐CdMoO 4 S‐scheme heterostructure photocatalyst was successfully constructed through a combined defect‐engineering and in situ transformation strategy, in which oxygen vacancies drive the evolution of the MoO 3 /CdMoO 4 Type‐II heterojunction into a direct S‐scheme heterojunction. Density functional theory calculations, together with in situ irradiated XPS and Au photodeposition experiments, reveal that oxygen vacancies reconstruct the interfacial electronic structure by introducing defect states near the Fermi level and fundamentally regulating the interfacial charge‐transfer pathway. Consequently, the optimized MoO 3‐x /Ov‐CdMoO 4 heterostructure exhibits a photocatalytic H 2 evolution rate of 25.1 µmol g −1 h −1 , approximately 6 times higher than that of pristine Ov‐CdMoO 4 , while maintaining excellent structural stability. More importantly, this work demonstrates that oxygen vacancies are identified as the decisive factor governing the evolution of heterojunction charge‐transfer behavior from a conventional Type‐II mechanism to a direct S‐scheme pathway, enabling efficient charge separation without sacrificing redox capability.
- 9 September 2026
- Published by Wiley in Advanced Sustainable Systems
- Vol. 10 (9) , e70654
Open AccessOxygen‐Vacancy‐Mediated Evolution from MoO 3 /CdMoO 4 Type‐II to MoO 3‐x /Ov−CdMoO 4 S‐Scheme Heterojunctions for Enhanced Photocatalytic H 2 Evolution
Constructing semiconductor heterojunctions has been widely recognized as an effective strategy for enhancing photocatalytic performance. However, rational regulation of interfacial charge‐transfer pathways, particularly the controllable transformation from conventional Type‐II to direct S‐scheme heterojunctions, remains a fundamental challenge. Herein, an oxygen‐vacancy‐rich MoO 3‐x /Ov‐CdMoO 4 S‐scheme heterostructure photocatalyst was successfully constructed through a combined defect‐engineering and in situ transformation strategy, in which oxygen vacancies drive the evolution of the MoO 3 /CdMoO 4 Type‐II heterojunction into a direct S‐scheme heterojunction. Density functional theory calculations, together with in situ irradiated XPS and Au photodeposition experiments, reveal that oxygen vacancies reconstruct the interfacial electronic structure by introducing defect states near the Fermi level and fundamentally regulating the interfacial charge‐transfer pathway. Consequently, the optimized MoO 3‐x /Ov‐CdMoO 4 heterostructure exhibits a photocatalytic H 2 evolution rate of 25.1 µmol g −1 h −1 , approximately 6 times higher than that of pristine Ov‐CdMoO 4 , while maintaining excellent structural stability. More importantly, this work demonstrates that oxygen vacancies are identified as the decisive factor governing the evolution of heterojunction charge‐transfer behavior from a conventional Type‐II mechanism to a direct S‐scheme pathway, enabling efficient charge separation without sacrificing redox capability.
- 25 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (17) , 11141-11147
Pt/Mo Cocatalyst-Modified g-C3N4/ZnIn2S4 Heterojunctions: Electron–Hole Separation Boosted Selective Photocatalytic Plastic Upcycling
Addressing the plastic waste crisis requires efficient photoreforming strategies. Although graphitic carbon nitride (g-C3N4) shows promise, rapid charge recombination and scarce active sites limit its catalytic performance. Herein, a g-C3N4/zinc indium sulfide (ZnIn2S4) heterojunction modified with synergistic Pt/Mo dual cocatalysts (CPZM) is fabricated to boost plastic photoreforming. The heterojunction promotes charge separation, while Pt/Mo cocatalysts accelerate charge transfer. During polylactic acid conversion, CPZM achieves a remarkable H2 evolution rate of 29.1 mmol g–1 h–1, alongside a pyruvic acid (PA) production of 6.5 mmol g–1 h–1 at 90% selectivity and an acetic acid (AcOH) yield of 0.73 mmol g–1 h–1. This work offers a viable strategy for plastic valorization to advance circular economy.
- 25 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (17) , 11141-11147
Pt/Mo Cocatalyst-Modified g-C3N4/ZnIn2S4 Heterojunctions: Electron–Hole Separation Boosted Selective Photocatalytic Plastic Upcycling
Addressing the plastic waste crisis requires efficient photoreforming strategies. Although graphitic carbon nitride (g-C3N4) shows promise, rapid charge recombination and scarce active sites limit its catalytic performance. Herein, a g-C3N4/zinc indium sulfide (ZnIn2S4) heterojunction modified with synergistic Pt/Mo dual cocatalysts (CPZM) is fabricated to boost plastic photoreforming. The heterojunction promotes charge separation, while Pt/Mo cocatalysts accelerate charge transfer. During polylactic acid conversion, CPZM achieves a remarkable H2 evolution rate of 29.1 mmol g–1 h–1, alongside a pyruvic acid (PA) production of 6.5 mmol g–1 h–1 at 90% selectivity and an acetic acid (AcOH) yield of 0.73 mmol g–1 h–1. This work offers a viable strategy for plastic valorization to advance circular economy.
Oxygen Vacancy‐Engineered S‐Scheme Heterojunction of BiVO 4 @Type II Red Phosphorus for Efficient Photocatalytic Hydrogen Evolution via Pure Water Splitting
Solar‐driven photocatalytic hydrogen production utilizing S‐scheme heterojunctions holds great potential due to their capacity for spatial carrier separation and maintaining a high redox potential. In this work, an S‐scheme heterojunction consisting of oxygen vacancy (V O )‐enriched BiVO 4 @Type II red phosphorus (BiVO 4 @RP) was synthesized by a facile ball‐milling approach, resulting in Type II RP nanosheets enwrapping the surface of decahedral BiVO 4 . The introduction of V O in BiVO 4 induces defect electronic states that serve as effective trapping sites for photogenerated electrons at the heterojunction interface. Consequently, the synergistic effect of V O in BiVO 4 and intimate interfacial contact between BiVO 4 and RP facilitate the migration of photo‐electrons through an S‐scheme transfer route, thereby enhancing the hydrogen production activity from pure water splitting. Remarkably, the optimized BiVO 4 @RP composite achieves a hydrogen evolution rate of 518.5 µmol·h −1 ·g −1 under simulated solar light irradiation. This study may provide valuable insights into the design of defect‐modulated S‐scheme heterojunction photocatalysts for efficient artificial photosynthesis.
Oxygen Vacancy‐Engineered S‐Scheme Heterojunction of BiVO 4 @Type II Red Phosphorus for Efficient Photocatalytic Hydrogen Evolution via Pure Water Splitting
Solar‐driven photocatalytic hydrogen production utilizing S‐scheme heterojunctions holds great potential due to their capacity for spatial carrier separation and maintaining a high redox potential. In this work, an S‐scheme heterojunction consisting of oxygen vacancy (V O )‐enriched BiVO 4 @Type II red phosphorus (BiVO 4 @RP) was synthesized by a facile ball‐milling approach, resulting in Type II RP nanosheets enwrapping the surface of decahedral BiVO 4 . The introduction of V O in BiVO 4 induces defect electronic states that serve as effective trapping sites for photogenerated electrons at the heterojunction interface. Consequently, the synergistic effect of V O in BiVO 4 and intimate interfacial contact between BiVO 4 and RP facilitate the migration of photo‐electrons through an S‐scheme transfer route, thereby enhancing the hydrogen production activity from pure water splitting. Remarkably, the optimized BiVO 4 @RP composite achieves a hydrogen evolution rate of 518.5 µmol·h −1 ·g −1 under simulated solar light irradiation. This study may provide valuable insights into the design of defect‐modulated S‐scheme heterojunction photocatalysts for efficient artificial photosynthesis.
- 29 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (31) , 42521-42533
Amphiphilicity-Tuned Sponge Architecture and Interfacial Adaptability in Electrospun PVDF/PVP/ZIF-8 Nanofibrous Membranes for Durable Dual-Mode Emulsion Separation
The efficient separation of stable oil-in-water (O/W) and water-in-oil (W/O) emulsions under challenging conditions remains a critical bottleneck in environmental remediation and industrial processes, often hampered by membrane fouling and limited selectivity. This study utilized electrospinning to incorporate polyvinylidene fluoride (PVDF) and polyvinylpyrrolidone (PVP) as robust porous nanofiber scaffolds, enabling the in situ growth of ZIF-8 metal–organic framework (MOF) nanoparticles, thereby fabricating a sponge-like polyvinylidene fluoride/polyvinylpyrrolidone/ZIF-8 nanofiber membrane. This membrane exhibits environmental responsiveness: highly hydrophilic in the oil phase and highly oleophobic in the water phase. When exposed to an oil phase environment, the low surface energy of PVDF and the oleophilic PVP/ZIF-8 components drive the adsorption and penetration of oil molecules on the membrane surface, while in the water phase environment, the water interaction of the PVP chain segments enables the membrane to exhibit underwater superoleophobicity. Comprehensive characterization confirmed the morphology, chemical composition, and pore size distribution of the membrane. Performance evaluation demonstrated that for various oil-in-water emulsions, an extremely high oil permeance of 2566 L m–2 h–1 bar–1 could be achieved, and a separation efficiency of over 99.2%. Additionally, the permeance of water-in-oil emulsions could reach 602 L m–2 h–1 bar–1, with a separation efficiency higher than 98.2%. Furthermore, the composite membrane demonstrated excellent cyclical stability, mechanical robustness, and chemical durability. By revealing a profound correlation between the precisely controlled microscopic structure and emergent macroscopic separation performance, this work advances the design principles for high-performance amphiphilic membranes, offering a promising and sustainable solution for complex emulsion separation challenges.
- 29 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (31) , 42521-42533
Amphiphilicity-Tuned Sponge Architecture and Interfacial Adaptability in Electrospun PVDF/PVP/ZIF-8 Nanofibrous Membranes for Durable Dual-Mode Emulsion Separation
The efficient separation of stable oil-in-water (O/W) and water-in-oil (W/O) emulsions under challenging conditions remains a critical bottleneck in environmental remediation and industrial processes, often hampered by membrane fouling and limited selectivity. This study utilized electrospinning to incorporate polyvinylidene fluoride (PVDF) and polyvinylpyrrolidone (PVP) as robust porous nanofiber scaffolds, enabling the in situ growth of ZIF-8 metal–organic framework (MOF) nanoparticles, thereby fabricating a sponge-like polyvinylidene fluoride/polyvinylpyrrolidone/ZIF-8 nanofiber membrane. This membrane exhibits environmental responsiveness: highly hydrophilic in the oil phase and highly oleophobic in the water phase. When exposed to an oil phase environment, the low surface energy of PVDF and the oleophilic PVP/ZIF-8 components drive the adsorption and penetration of oil molecules on the membrane surface, while in the water phase environment, the water interaction of the PVP chain segments enables the membrane to exhibit underwater superoleophobicity. Comprehensive characterization confirmed the morphology, chemical composition, and pore size distribution of the membrane. Performance evaluation demonstrated that for various oil-in-water emulsions, an extremely high oil permeance of 2566 L m–2 h–1 bar–1 could be achieved, and a separation efficiency of over 99.2%. Additionally, the permeance of water-in-oil emulsions could reach 602 L m–2 h–1 bar–1, with a separation efficiency higher than 98.2%. Furthermore, the composite membrane demonstrated excellent cyclical stability, mechanical robustness, and chemical durability. By revealing a profound correlation between the precisely controlled microscopic structure and emergent macroscopic separation performance, this work advances the design principles for high-performance amphiphilic membranes, offering a promising and sustainable solution for complex emulsion separation challenges.
- 19 July 2026
- Published by Wiley in Advanced Sustainable Systems
- Vol. 10 (7)
Enhanced Photocatalytic H 2 Evolution Performance of CdS via Surface Hydroxyl Functionalized Ti 3 C 2
Photocatalytic technology is considered a critical pathway for hydrogen production due to its green and sustainable nature. However, conventional CdS photocatalyst generally suffer from sluggish catalytic kinetics in the hydrogen evolution reaction, which significantly restricts the enhancement of photocatalytic efficiency and practical applications. Herein, the hydrophilicity of CdS/Ti 3 C 2 ‐T has been greatly enhanced by surface modified MXenes (Ti 3 C 2 ‐T) with hydroxyl (‐OH) active groups as cocatalysts, promoting the adsorption of water molecules. Meanwhile, the hydroxyl (‐OH) surface modification plays important role in Fermi level of Ti 3 C 2 ‐T, resulting in the formation of ohmic junction between CdS and Ti 3 C 2 ‐OH. Mechanistic analyses via theoretical simulations reveal that the interfacial ohmic junction drives efficient charge separation and transfer through the intrinsic built‐in electric field. The CdS/Ti 3 C 2 ‐OH hybrids possess an outstanding H 2 evolution rate with 5.42 mmol g −1 h −1 ), which is higher than those of CdS/Ti 3 C 2 ‐F and CdS/Ti 3 C 2 ‐O, and 6.8 folds of pristine CdS, respectively. This work presents a strategy for improving hydrogen evolution reaction kinetics through surface modification of photocatalysts, therefore boosting the charge separation.
- 19 July 2026
- Published by Wiley in Advanced Sustainable Systems
- Vol. 10 (7)
Enhanced Photocatalytic H 2 Evolution Performance of CdS via Surface Hydroxyl Functionalized Ti 3 C 2
Photocatalytic technology is considered a critical pathway for hydrogen production due to its green and sustainable nature. However, conventional CdS photocatalyst generally suffer from sluggish catalytic kinetics in the hydrogen evolution reaction, which significantly restricts the enhancement of photocatalytic efficiency and practical applications. Herein, the hydrophilicity of CdS/Ti 3 C 2 ‐T has been greatly enhanced by surface modified MXenes (Ti 3 C 2 ‐T) with hydroxyl (‐OH) active groups as cocatalysts, promoting the adsorption of water molecules. Meanwhile, the hydroxyl (‐OH) surface modification plays important role in Fermi level of Ti 3 C 2 ‐T, resulting in the formation of ohmic junction between CdS and Ti 3 C 2 ‐OH. Mechanistic analyses via theoretical simulations reveal that the interfacial ohmic junction drives efficient charge separation and transfer through the intrinsic built‐in electric field. The CdS/Ti 3 C 2 ‐OH hybrids possess an outstanding H 2 evolution rate with 5.42 mmol g −1 h −1 ), which is higher than those of CdS/Ti 3 C 2 ‐F and CdS/Ti 3 C 2 ‐O, and 6.8 folds of pristine CdS, respectively. This work presents a strategy for improving hydrogen evolution reaction kinetics through surface modification of photocatalysts, therefore boosting the charge separation.
- 5 June 2026
- Published by Wiley in Advanced Sustainable Systems
- Vol. 10 (6)
Fe‐Doped In 2 O 3 Fibers Enabling Efficient Photo‐Fenton Degradation of Organic Pollutants
Organic pollutant contamination in aquatic environments has become a serious environmental issue, and conventional treatment methods are often insufficient for their removal. In this study, 1D hollow Fe–In 2 O 3 fibers with highly dispersed Fe active sites were constructed, providing abundant redox‐active sites. The hollow fibrous morphology provides a large surface exposure and structural stability for catalytic reactions, while the introduced Fe species facilitate H 2 O 2 activation and promote the generation of hydroxyl radicals (·OH). The Fe‐In 2 O 3 hollow fibers exhibit excellent photo‐Fenton activity under visible‐light irradiation, achieving 96% tetracycline degradation within 4 h, which is 4.8 times higher than that of pristine In 2 O 3. This work systematically investigates the structure–performance relationships, photogenerated carrier behavior, and reactive species generation mechanism, offering new insights and strategies for the design of efficient, stable, and recyclable heterogeneous photo‐Fenton catalysts for wastewater treatment and recalcitrant pollutant removal.
- 5 June 2026
- Published by Wiley in Advanced Sustainable Systems
- Vol. 10 (6)
Fe‐Doped In 2 O 3 Fibers Enabling Efficient Photo‐Fenton Degradation of Organic Pollutants
Organic pollutant contamination in aquatic environments has become a serious environmental issue, and conventional treatment methods are often insufficient for their removal. In this study, 1D hollow Fe–In 2 O 3 fibers with highly dispersed Fe active sites were constructed, providing abundant redox‐active sites. The hollow fibrous morphology provides a large surface exposure and structural stability for catalytic reactions, while the introduced Fe species facilitate H 2 O 2 activation and promote the generation of hydroxyl radicals (·OH). The Fe‐In 2 O 3 hollow fibers exhibit excellent photo‐Fenton activity under visible‐light irradiation, achieving 96% tetracycline degradation within 4 h, which is 4.8 times higher than that of pristine In 2 O 3. This work systematically investigates the structure–performance relationships, photogenerated carrier behavior, and reactive species generation mechanism, offering new insights and strategies for the design of efficient, stable, and recyclable heterogeneous photo‐Fenton catalysts for wastewater treatment and recalcitrant pollutant removal.
- 31 May 2026
- Published by Wiley in ChemCatChem
- Vol. 18 (11)
ZnWO 4 /WO 3 Heterojunction Photoanodes for Selective Photoelectrochemical Conversion of Glycerol to Glyceraldehyde
Photoelectrocatalytic (PEC) conversion of glycerol into valuable chemicals represents a promising technology for achieving a green chemical industry. Designing excellent and stable photoelectrode materials with efficient charge separation and interfacial reaction kinetics is crucial for advancing the industrialization of PEC glycerol conversion. Herein, a ZnWO 4 /WO 3 (ZWO/WO) heterojunction photoanode was designed and fabricated via in situ hydrothermal growth of ZnWO 4 nanoparticles on WO 3 nanosheet arrays. Comprehensive structural and spectroscopic analyses revealed the formation of a compact heterostructure with strong electronic coupling between ZnWO 4 and WO 3 . Consequently, the optimized ZWO/WO photoanode exhibits an impressive 1.5‐fold enhancement in the glyceraldehyde (GLD) yield rate (320.1 mmol m −2 h −1 at 1.4 V RHE ) compared to pristine WO 3 . Moreover, the introduction of ZnWO 4 enhances the selectivity of liquid products toward GLD, increasing from 70.8% to 81%. The ZWO/WO photoanode exhibits excellent operational stability over 18 h at 1.0 V RHE . The incident photon‐to‐current efficiency (IPCE) increases from 27.5% to 35% at 400 nm wavelength with glycerol conditions. The synergistic interaction between ZnWO 4 and WO 3 accelerates charge transfer and oxidation kinetics, thereby promoting the selective formation of the C 3 product.
- 31 May 2026
- Published by Wiley in ChemCatChem
- Vol. 18 (11)
ZnWO 4 /WO 3 Heterojunction Photoanodes for Selective Photoelectrochemical Conversion of Glycerol to Glyceraldehyde
Photoelectrocatalytic (PEC) conversion of glycerol into valuable chemicals represents a promising technology for achieving a green chemical industry. Designing excellent and stable photoelectrode materials with efficient charge separation and interfacial reaction kinetics is crucial for advancing the industrialization of PEC glycerol conversion. Herein, a ZnWO 4 /WO 3 (ZWO/WO) heterojunction photoanode was designed and fabricated via in situ hydrothermal growth of ZnWO 4 nanoparticles on WO 3 nanosheet arrays. Comprehensive structural and spectroscopic analyses revealed the formation of a compact heterostructure with strong electronic coupling between ZnWO 4 and WO 3 . Consequently, the optimized ZWO/WO photoanode exhibits an impressive 1.5‐fold enhancement in the glyceraldehyde (GLD) yield rate (320.1 mmol m −2 h −1 at 1.4 V RHE ) compared to pristine WO 3 . Moreover, the introduction of ZnWO 4 enhances the selectivity of liquid products toward GLD, increasing from 70.8% to 81%. The ZWO/WO photoanode exhibits excellent operational stability over 18 h at 1.0 V RHE . The incident photon‐to‐current efficiency (IPCE) increases from 27.5% to 35% at 400 nm wavelength with glycerol conditions. The synergistic interaction between ZnWO 4 and WO 3 accelerates charge transfer and oxidation kinetics, thereby promoting the selective formation of the C 3 product.
- 5 May 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (41) , 10520-10523
Rational design of electron-deficient COFs via ketone and sulfone functionalization for dramatically enhanced photocatalytic hydrogen peroxide production
Photocatalytic charge separation mechanism in a ketone-functionalized COF: an internal electric field drives electron migration from the Tp donor to the ketone acceptor, generating superoxide radicals (˙O 2 − ) for efficient H 2 O 2 production.
- 5 May 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (41) , 10520-10523
Rational design of electron-deficient COFs via ketone and sulfone functionalization for dramatically enhanced photocatalytic hydrogen peroxide production
Photocatalytic charge separation mechanism in a ketone-functionalized COF: an internal electric field drives electron migration from the Tp donor to the ketone acceptor, generating superoxide radicals (˙O 2 − ) for efficient H 2 O 2 production.
- Open Access
- 17 April 2026
- Published by Elsevier in SSRN Electronic Journal
Lattice-Coupled CdS/CsxWO3 S-scheme Heterojunction with Complementary UV–Vis–NIR Absorption for Enhanced Photocatalytic H2 Evolution
Efficient heterojunction photocatalysis demands the concurrent optimization of light harvesting and interfacial charge transfer through well-coupled interfaces, which remains challenging. Herein, we report a broadband (UV–vis–NIR) CdS/CsxWO3 heterojunction that enables highly efficient photocatalytic H2 evolution via a plasmon-enhanced S-scheme mechanism. The CdS/CsxWO3 heterojunction integrates the localized surface plasmon resonance (LSPR) of CsxWO3 nanorods with CdS nanoparticles through a lattice-matched interface, with a real local lattice mismatch of ~6.9% for CdS and ~4.5% CsxWO3 as determined by TEM analysis. This lattice-coupled configuration facilitates strong interfacial electronic interaction, leading to a hydrogen evolution rate of 1.4 mmol h-1 g-1, nearly three orders of magnitude higher than that of pristine CdS. Mechanistic studies reveal that the synergistic interplay between plasmon excitation and the S-scheme charge-transfer pathway promotes ultrafast charge separation and transport, evidenced by a 6.4-fold reduction in photoluminescence lifetime. This work presents a viable strategy for designing lattice-engineered plasmonic S-scheme heterojunctions that enable efficient full-spectrum solar-to-hydrogen conversion.
- 17 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessLattice-Coupled CdS/CsxWO3 S-scheme Heterojunction with Complementary UV–Vis–NIR Absorption for Enhanced Photocatalytic H2 Evolution
Efficient heterojunction photocatalysis demands the concurrent optimization of light harvesting and interfacial charge transfer through well-coupled interfaces, which remains challenging. Herein, we report a broadband (UV–vis–NIR) CdS/CsxWO3 heterojunction that enables highly efficient photocatalytic H2 evolution via a plasmon-enhanced S-scheme mechanism. The CdS/CsxWO3 heterojunction integrates the localized surface plasmon resonance (LSPR) of CsxWO3 nanorods with CdS nanoparticles through a lattice-matched interface, with a real local lattice mismatch of ~6.9% for CdS and ~4.5% CsxWO3 as determined by TEM analysis. This lattice-coupled configuration facilitates strong interfacial electronic interaction, leading to a hydrogen evolution rate of 1.4 mmol h-1 g-1, nearly three orders of magnitude higher than that of pristine CdS. Mechanistic studies reveal that the synergistic interplay between plasmon excitation and the S-scheme charge-transfer pathway promotes ultrafast charge separation and transport, evidenced by a 6.4-fold reduction in photoluminescence lifetime. This work presents a viable strategy for designing lattice-engineered plasmonic S-scheme heterojunctions that enable efficient full-spectrum solar-to-hydrogen conversion.
- 24 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (7) , 4926-4935
Underwater Adhesives Enabled by Interfacial Water Activation through Solvent Exchange and In Situ Silane Hydrolysis Cross-Linking
- 24 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (7) , 4926-4935
Underwater Adhesives Enabled by Interfacial Water Activation through Solvent Exchange and In Situ Silane Hydrolysis Cross-Linking