Chengzhi Ma
Research Subjects
Chengzhi Ma has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Shaodan Ma
University of Macau
6 shared publications - Jintao Wang
State Key Laboratory of Internet of Things for Smart City, University of Macau, Macau, China
5 shared publications - Guanghua Yang
School of Intelligent Systems Science and Engineering and the GBA and BR International Joint Research Center for Smart Logistics, Jinan University, Zhuhai, China
4 shared publications - Xi Yang
School of Communication and Electronic Engineering, East China Normal University, Shanghai, China
3 shared publications - Shiqi Gong
School of Information and Electronics, Beijing Institute of Technology, Beijing, China
2 shared publications - Wei Zhang
The University of New South Wales
2 shared publications
Latest Publications
- 27 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25 (15361276) , 8097-8113
Rate Maximization and Mode Selection for RDARS-Assisted MIMO Communications With Perfect and Imperfect CSI
Reconfigurable distributed antenna and reflecting surface (RDARS) has been recently proposed as a promising technology. This architecture enables each element to perform flexibly either in the reflection mode, like the traditional passive reconfigurable intelligent surface (RIS), or in the connection mode, akin to the distributed antenna system (DAS). This dual capability allows RDARS to harness both reflection gain and distribution gain. In this paper, we investigate a dynamic RDARS-aided multiple-input multiple-output communication system, where the optimal configuration of the elements operating in connection mode can provide additional selection gain. Considering the theoretical and practical significances, we address the achievable rate maximization problem by jointly optimizing the mode selection, transmit power allocation and passive beamforming under both perfect and imperfect channel state information (CSI) cases. Due to the involvement of the mode selection design of RDARS, the problem is more challenging than those of the traditional RIS-aided systems with fixed reflection operation. For perfect CSI case, by investigating the inherent properties of the objective function, we propose a greedy-based alternating optimization (AO) algorithm with low-complexity and then extend the proposed algorithm to the general multi-user multi-RDARS scenario. Additionally, we find interesting insights about the mode selection of RDARS in a special scenario with a single-antenna user. The result shows that the RDARS elements leading to the largest distribution gain should be selected to operate in connection mode for the rate maximization. For imperfect CSI case, we develop an efficient alternative direction method of multipliers-based AO algorithm. Numerical results show that RDARS-assisted system outperforms the passive-RIS assisted system and DAS under both perfect and imperfect CSI scenarios with promising reflection, distribution and selection gains.
- 27 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25 (15361276) , 8097-8113
Rate Maximization and Mode Selection for RDARS-Assisted MIMO Communications With Perfect and Imperfect CSI
Reconfigurable distributed antenna and reflecting surface (RDARS) has been recently proposed as a promising technology. This architecture enables each element to perform flexibly either in the reflection mode, like the traditional passive reconfigurable intelligent surface (RIS), or in the connection mode, akin to the distributed antenna system (DAS). This dual capability allows RDARS to harness both reflection gain and distribution gain. In this paper, we investigate a dynamic RDARS-aided multiple-input multiple-output communication system, where the optimal configuration of the elements operating in connection mode can provide additional selection gain. Considering the theoretical and practical significances, we address the achievable rate maximization problem by jointly optimizing the mode selection, transmit power allocation and passive beamforming under both perfect and imperfect channel state information (CSI) cases. Due to the involvement of the mode selection design of RDARS, the problem is more challenging than those of the traditional RIS-aided systems with fixed reflection operation. For perfect CSI case, by investigating the inherent properties of the objective function, we propose a greedy-based alternating optimization (AO) algorithm with low-complexity and then extend the proposed algorithm to the general multi-user multi-RDARS scenario. Additionally, we find interesting insights about the mode selection of RDARS in a special scenario with a single-antenna user. The result shows that the RDARS elements leading to the largest distribution gain should be selected to operate in connection mode for the rate maximization. For imperfect CSI case, we develop an efficient alternative direction method of multipliers-based AO algorithm. Numerical results show that RDARS-assisted system outperforms the passive-RIS assisted system and DAS under both perfect and imperfect CSI scenarios with promising reflection, distribution and selection gains.
- 1 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (9) , 14943-14948
Robust Beamforming Design and Antenna Selection for Dynamic HRIS-Aided MISO Systems
In this paper, we propose a dynamic hybrid active-passive reconfigurable intelligent surface (HRIS) to enhance multiple-input-single-output (MISO) communications, leveraging the property of dynamically placing active elements. Specifically, considering the impact of hardware impairments (HWIs), we investigate channel-aware configurations of the receive antennas at the base station (BS) and the active/passive elements at the HRIS to improve transmission reliability. To this end, we propose a penalty-based exact block coordinate descent (PEBCD) algorithm to address the mean-square-error (MSE) minimization problem for the dynamic HRIS-aided MISO system by jointly optimizing the BS receive antenna selection matrix, the reflection phase coefficients, the reflection amplitude matrix, and the mode selection matrix of the HRIS. Numerical simulations demonstrate the significant superiority of our proposed scheme over conventional benchmark schemes.
- 1 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (9) , 14943-14948
Robust Beamforming Design and Antenna Selection for Dynamic HRIS-Aided MISO Systems
In this paper, we propose a dynamic hybrid active-passive reconfigurable intelligent surface (HRIS) to enhance multiple-input-single-output (MISO) communications, leveraging the property of dynamically placing active elements. Specifically, considering the impact of hardware impairments (HWIs), we investigate channel-aware configurations of the receive antennas at the base station (BS) and the active/passive elements at the HRIS to improve transmission reliability. To this end, we propose a penalty-based exact block coordinate descent (PEBCD) algorithm to address the mean-square-error (MSE) minimization problem for the dynamic HRIS-aided MISO system by jointly optimizing the BS receive antenna selection matrix, the reflection phase coefficients, the reflection amplitude matrix, and the mode selection matrix of the HRIS. Numerical simulations demonstrate the significant superiority of our proposed scheme over conventional benchmark schemes.
- 22 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 23 (12) , 18806-18821
RDARS Empowered Massive MIMO System: Two-Timescale Transceiver Design With Imperfect CSI
In this paper, we investigate a novel reconfigurable distributed antennas and reflecting surface (RDARS) aided multi-user massive multiple-input multiple-output (MIMO) system with imperfect channel state information (CSI) and propose a practical two-timescale (TTS) transceiver design to reduce the communication overhead and computational complexity of the system. In the RDARS-aided system, not only distribution gain but also reflection gain can be obtained by a flexible combination of the distributed antennas and reflecting surface, which differentiates the system from the others and also makes the TTS design challenging. To enable the optimal TTS transceiver design, the achievable rate of the system is first derived in closed-form. The rate expression is general and covers that of the distributed antenna systems (DAS) and reconfigurable intelligent surface (RIS) aided systems as special cases. Then the TTS design aiming at the weighted sum rate maximization is considered. To solve the challenging non-convex optimization problem with high order design variables, i.e., the transmit powers and the phase shifts at the RDARS, a block coordinate descent based method is proposed to find the optimal solutions in semi-closed forms iteratively. Specifically, two efficient algorithms are proposed with provable convergence for the optimal phase shift design, i.e., Riemannian Gradient Ascent based algorithm by exploiting the unit-modulus constraints, and Two-Tier Majorization-Minimization based algorithm with closed-form optimal solutions in each iteration. Simulation results validate the effectiveness of the proposed algorithm and demonstrate the superiority of deploying RDARS in massive MIMO systems to provide substantial rate improvement with a significantly reduced total number of active antennas/RF chains and lower transmit power when compared to the DAS and RIS-aided systems.
- 22 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 23 (12) , 18806-18821
RDARS Empowered Massive MIMO System: Two-Timescale Transceiver Design With Imperfect CSI
In this paper, we investigate a novel reconfigurable distributed antennas and reflecting surface (RDARS) aided multi-user massive multiple-input multiple-output (MIMO) system with imperfect channel state information (CSI) and propose a practical two-timescale (TTS) transceiver design to reduce the communication overhead and computational complexity of the system. In the RDARS-aided system, not only distribution gain but also reflection gain can be obtained by a flexible combination of the distributed antennas and reflecting surface, which differentiates the system from the others and also makes the TTS design challenging. To enable the optimal TTS transceiver design, the achievable rate of the system is first derived in closed-form. The rate expression is general and covers that of the distributed antenna systems (DAS) and reconfigurable intelligent surface (RIS) aided systems as special cases. Then the TTS design aiming at the weighted sum rate maximization is considered. To solve the challenging non-convex optimization problem with high order design variables, i.e., the transmit powers and the phase shifts at the RDARS, a block coordinate descent based method is proposed to find the optimal solutions in semi-closed forms iteratively. Specifically, two efficient algorithms are proposed with provable convergence for the optimal phase shift design, i.e., Riemannian Gradient Ascent based algorithm by exploiting the unit-modulus constraints, and Two-Tier Majorization-Minimization based algorithm with closed-form optimal solutions in each iteration. Simulation results validate the effectiveness of the proposed algorithm and demonstrate the superiority of deploying RDARS in massive MIMO systems to provide substantial rate improvement with a significantly reduced total number of active antennas/RF chains and lower transmit power when compared to the DAS and RIS-aided systems.
- 3 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 23 (11) , 17557-17572
Joint Beamforming Optimization and Mode Selection for RDARS-Aided MIMO Systems
Reconfigurable intelligent surface (RIS) has emerged as a cost-effective solution for green communications in 6G. However, its further extensive use has been greatly limited due to its fully passive characteristics. Considering the appealing distribution gains of distributed antenna systems (DAS), a flexible reconfigurable architecture called reconfigurable distributed antenna and reflecting surface (RDARS) is proposed. RDARS encompasses DAS and RIS as two special cases and maintains the advantages of distributed antennas while reducing the hardware cost by replacing some active antennas with low-cost passive reflecting surfaces. In this paper, we present a RDARS-aided uplink multi-user communication system and investigate the system transmission reliability with the newly proposed architecture. Specifically, in addition to the distribution gain and the reflection gain provided by the connection and reflection modes, respectively, we also consider the dynamic mode switching of each element which introduces an additional degree of freedom (DoF) and thus results in a selection gain. As such, we aim to minimize the total sum mean-square-error (MSE) of all data streams by jointly optimizing the receive beamforming matrix, the reflection phase shifts and the channel-aware placement of elements in the connection mode. To tackle this nonconvex problem with intractable binary and cardinality constraints, we propose an inexact block coordinate descent (BCD) based penalty dual decomposition (PDD) algorithm with the guaranteed convergence. Since the PDD algorithm usually suffers from high computational complexity, a low-complexity greedy-search-based alternating optimization (AO) algorithm is developed to yield a semi-closed-form solution with acceptable performance. Numerical results demonstrate the superiority of the proposed architecture compared to the conventional fully passive RIS or DAS. Furthermore, some insights about the practical implementation of RDARS are provided.
- 3 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 23 (11) , 17557-17572
Joint Beamforming Optimization and Mode Selection for RDARS-Aided MIMO Systems
Reconfigurable intelligent surface (RIS) has emerged as a cost-effective solution for green communications in 6G. However, its further extensive use has been greatly limited due to its fully passive characteristics. Considering the appealing distribution gains of distributed antenna systems (DAS), a flexible reconfigurable architecture called reconfigurable distributed antenna and reflecting surface (RDARS) is proposed. RDARS encompasses DAS and RIS as two special cases and maintains the advantages of distributed antennas while reducing the hardware cost by replacing some active antennas with low-cost passive reflecting surfaces. In this paper, we present a RDARS-aided uplink multi-user communication system and investigate the system transmission reliability with the newly proposed architecture. Specifically, in addition to the distribution gain and the reflection gain provided by the connection and reflection modes, respectively, we also consider the dynamic mode switching of each element which introduces an additional degree of freedom (DoF) and thus results in a selection gain. As such, we aim to minimize the total sum mean-square-error (MSE) of all data streams by jointly optimizing the receive beamforming matrix, the reflection phase shifts and the channel-aware placement of elements in the connection mode. To tackle this nonconvex problem with intractable binary and cardinality constraints, we propose an inexact block coordinate descent (BCD) based penalty dual decomposition (PDD) algorithm with the guaranteed convergence. Since the PDD algorithm usually suffers from high computational complexity, a low-complexity greedy-search-based alternating optimization (AO) algorithm is developed to yield a semi-closed-form solution with acceptable performance. Numerical results demonstrate the superiority of the proposed architecture compared to the conventional fully passive RIS or DAS. Furthermore, some insights about the practical implementation of RDARS are provided.
- 14 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 72 (10) , 6583-6598
Reconfigurable Distributed Antennas and Reflecting Surface: A New Architecture for Wireless Communications
Distributed Antenna Systems (DASs) employ multiple antenna arrays in remote radio units to achieve highly directional transmission and provide great coverage performance for future-generation networks. However, the utilization of fully digital or hybrid active antenna arrays results in a significant increase in hardware costs and power consumption for DAS. To address these issues, integrating DAS with Reconfigurable Intelligent Surfaces (RIS) offers a viable approach to ensure coverage and transmission performance while maintaining low hardware costs and power consumption. To incorporate the merits of RIS into the DAS from practical consideration, a novel architecture of “Reconfigurable Distributed Antennas and Reflecting Surfaces (RDARS)” is proposed in this paper. Specifically, based on the design of the additional direct-through state together with the existing high-quality fronthaul link, any element of the RDARS can be dynamically programmed to connect with the base station (BS) via fibers and perform the connected mode as remote distributed antennas of the BS to receive or transmit signals. Additionally, RDARS also inherits the low-cost and low-energy-consumption benefits of fully passive RISs by default configuring the elements as passive to perform the reflection mode . As a result, RDARS encompasses both DAS and RIS as special cases, offering flexible control over the trade-off between distribution gain and reflection gain to enhance performance. To unveil the potential of such architecture, the ergodic achievable rate under the RDARS architecture is analyzed and closed-form expression with meaningful insights is derived. The theoretical analysis proves that the RDARS can achieve a higher achievable rate than both DAS and fully passive RIS with the passive beamforming gain provided by elements acting reflection mode while combating the “multiplicative fading” suffered by RISs through the connected mode performed at the RDARS. Simulation results also demonstrate the superiority of the RDARS architecture over DAS and passive RIS-aided systems and its flexible trade-off between performance and cost. To further validate the feasibility and effectiveness, an RDARS prototype with 256 elements is built for real experiments. Experimental results show that the RDARS-aided system with only one element operating in connected mode can achieve an additional 21% and 170% throughput improvement over DAS and RIS-aided systems, respectively.
- 14 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 72 (10) , 6583-6598
Reconfigurable Distributed Antennas and Reflecting Surface: A New Architecture for Wireless Communications
Distributed Antenna Systems (DASs) employ multiple antenna arrays in remote radio units to achieve highly directional transmission and provide great coverage performance for future-generation networks. However, the utilization of fully digital or hybrid active antenna arrays results in a significant increase in hardware costs and power consumption for DAS. To address these issues, integrating DAS with Reconfigurable Intelligent Surfaces (RIS) offers a viable approach to ensure coverage and transmission performance while maintaining low hardware costs and power consumption. To incorporate the merits of RIS into the DAS from practical consideration, a novel architecture of “Reconfigurable Distributed Antennas and Reflecting Surfaces (RDARS)” is proposed in this paper. Specifically, based on the design of the additional direct-through state together with the existing high-quality fronthaul link, any element of the RDARS can be dynamically programmed to connect with the base station (BS) via fibers and perform the connected mode as remote distributed antennas of the BS to receive or transmit signals. Additionally, RDARS also inherits the low-cost and low-energy-consumption benefits of fully passive RISs by default configuring the elements as passive to perform the reflection mode . As a result, RDARS encompasses both DAS and RIS as special cases, offering flexible control over the trade-off between distribution gain and reflection gain to enhance performance. To unveil the potential of such architecture, the ergodic achievable rate under the RDARS architecture is analyzed and closed-form expression with meaningful insights is derived. The theoretical analysis proves that the RDARS can achieve a higher achievable rate than both DAS and fully passive RIS with the passive beamforming gain provided by elements acting reflection mode while combating the “multiplicative fading” suffered by RISs through the connected mode performed at the RDARS. Simulation results also demonstrate the superiority of the RDARS architecture over DAS and passive RIS-aided systems and its flexible trade-off between performance and cost. To further validate the feasibility and effectiveness, an RDARS prototype with 256 elements is built for real experiments. Experimental results show that the RDARS-aided system with only one element operating in connected mode can achieve an additional 21% and 170% throughput improvement over DAS and RIS-aided systems, respectively.
- 26 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 11 (10) , 2105-2109
Massive MIMO Empowered Wireless Powered Sensor Networks: An Optimal Design With Statistical CSI
Wireless energy transfer (WET) has been anticipated as a viable solution to combat the challenges of scarce energy supply in Internet-of-Things (IoT) applications. To reap the benefit brought by large scale antenna arrays, massive multiple-input-multiple-out (MIMO) empowered wireless powered sensor networks (WPSNs) is investigated in this letter to meet the urgent demand for reliable and self-sustainable IoT applications. Considering a large-scale antenna array deployed at the access point for energy transfer to and information collection from the multiple-antenna wireless powered sensors, the hardening property in energy transfer is generalized and theoretically proved based on random matrix theory. Based on the hardening properties, the harvesting energy and the uplink sum-rate for sensor data collection are found to be asymptotically deterministic and depend on the statistical channel state information (CSI) only. The hardening properties in both energy and information transfers enable a novel optimal design on the WPSNs based on statistical CSI only. Particularly, the designs of the downlink energy beamforming and multiple uplink information beamforming can be decoupled, and global optimal solutions for the beamforming and time allocation to maximize the uplink sum-rate given downlink power constraint are found in semi-closed forms. Different from prior WPSNs designs, statistical CSI but not instantaneous CSI is exploited and frequent channel estimation and heavy communication overhead can be avoided with a much lower computation complexity, thus improving the practicability and sustainability of the WPSNs. The effectiveness of the proposed design is finally demonstrated by numerical simulations.
- 26 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 11 (10) , 2105-2109
Massive MIMO Empowered Wireless Powered Sensor Networks: An Optimal Design With Statistical CSI
Wireless energy transfer (WET) has been anticipated as a viable solution to combat the challenges of scarce energy supply in Internet-of-Things (IoT) applications. To reap the benefit brought by large scale antenna arrays, massive multiple-input-multiple-out (MIMO) empowered wireless powered sensor networks (WPSNs) is investigated in this letter to meet the urgent demand for reliable and self-sustainable IoT applications. Considering a large-scale antenna array deployed at the access point for energy transfer to and information collection from the multiple-antenna wireless powered sensors, the hardening property in energy transfer is generalized and theoretically proved based on random matrix theory. Based on the hardening properties, the harvesting energy and the uplink sum-rate for sensor data collection are found to be asymptotically deterministic and depend on the statistical channel state information (CSI) only. The hardening properties in both energy and information transfers enable a novel optimal design on the WPSNs based on statistical CSI only. Particularly, the designs of the downlink energy beamforming and multiple uplink information beamforming can be decoupled, and global optimal solutions for the beamforming and time allocation to maximize the uplink sum-rate given downlink power constraint are found in semi-closed forms. Different from prior WPSNs designs, statistical CSI but not instantaneous CSI is exploited and frequent channel estimation and heavy communication overhead can be avoided with a much lower computation complexity, thus improving the practicability and sustainability of the WPSNs. The effectiveness of the proposed design is finally demonstrated by numerical simulations.