IOIan K. Ocampo

Ian K. Ocampo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ian K. Ocampo has a total of 167 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Improvements in backlighter efficiency and target shielding for time-resolved x-ray diffraction measurements at the National Ignition Facility (NIF)

    by C. E. Vennari, S. Singh, A. L. Coleman, N. E. Palmer, I. K. Ocampo, N. Bhandakar, P. M. Celliers, J. H. Eggert, C. Heinbockel, C. M. Krauland, et al.

    At the National Ignition Facility, the time-resolved x-ray diffraction campaign records four snapshot diffraction patterns—with a temporal resolution of 2 ns and separated by 2 ns—during a single compression experiment. Data are collected with the Flexible Imaging Diffraction Diagnostic for Laser Experiments (FIDDLE) using five Icarus hybrid complementary metal–oxide–semiconductor (hCMOS) sensors. This multi-frame capability enables measurements of phase-transition kinetics, including solid–solid and eventually solid–liquid transformations, and supports efficient mapping of phase space with four data points per experiment. Achieving these measurements requires a high signal-to-noise ratio with a backlighter (BL) x-ray source, but the background is complex, and generally increases over the course of a shot. This paper details improvements in continuous x-ray generation with a Ge BL foil for >15 ns. In addition, we investigate a background contribution originating in the BL plasma, which generates hot electrons that impact the target and produce secondary x-rays. In the prior target configuration, secondary x-rays generated on the target sidewall had a direct line of sight to the Icarus sensors, increasing the background on the sensor as time progressed. We redesigned the target to reduce this line of sight, thereby more effectively “shadowing” the sensors. The modified design improved signal-to-noise ratio dramatically, thereby enabling us to improve from observing diffraction on only two sensors at 1–2 time steps to observing diffraction on all five Icarus sensors at all time steps.

  • X-ray-pump, speckled optical-probe transient grating spectroscopy at a hard-x-ray free electron laser

    by T. M. Hutchinson, C. P. McGuire, I. K. Ocampo, J. H. Eggert, C. Davis, E. C. Galtier, D. Khaghani, N. A. Boiadjieva, B. K. Ofori-Okai, S. Lee, et al.

    Despite being a well-developed technique, transient grating spectroscopy has not been widely adapted to high-pressure condensed matter experiments. Here, a platform for x-ray-pump, optical probe transient grating spectroscopy in averaged mode is described. Improvements that may enable eventual single-shot assessments of thermal diffusivity for optically transparent materials at high pressure are detailed.

  • Open Access

    Structure of niobium to 365 GPa using ultrafast x-ray diffraction and shock compression

    by C. M. Lonsdale, J. D. McHardy, C. V. Storm, M. I. McMahon, R. S. McWilliams, N. Jaisle, M. Jones, C. R. Roy, R. F. Smith, A. Descamps, et al.

    The phase stability, crystal structure, and melting of Nb have been examined under high pressure shock compression to 365 GPa using ultrafast x-ray diffraction measurements on two x-ray free electron laser facilities. On compression, Nb remains stable in the bcc phase up to 220 GPa, with coexistence of bcc-Nb and liquid from 249 to 298 GPa, and complete melting at 301 GPa, with melt identified by diffuse liquid diffraction. Melting initiates at higher pressure than expected based on theoretical predictions, and the data consistently excludes the presence of other suggested phases of Nb at these pressures, including and hcp, thereby resolving the long-standing structural discrepancy. Singh-type strength analysis provides experimental evidence for a change in sign of the elastic anisotropy parameter at 121 GPa, consistent with the previously reported heat-induced hardening to heat-induced softening transition in Nb.

  • High-pressure melt dynamics in shock-compressed titanium

    by Saransh Singh, Reetam Paul, Nikhil Rampal, Rhys J. Bunting, Sebastien Hamel, Nathan Pulver, Christopher P. McGuire, Samantha M. Clarke, Amy L. Coleman, Cara Vennari, et al.

  • Body-Centered-Cubic Phase Transformation in Gold at TPa Pressures

    by Amy L. Coleman, Saransh Singh, Tom E. Lockard, Ian K. Ocampo, Amy E. Lazicki, Martin G. Gorman, Stefano Racioppi, Andrew G. Krygier, Christopher E. Wehrenberg, Rasool Ahmad, et al.

    In situ x-ray diffraction at both the National Ignition Facility and Omega-EP Laser Facility has been utilized to determine the crystallographic state of ramp and shock-ramp compressed gold up to 1.2 TPa (1 TPa=10 Mbar=10×10^{6} atmospheres). In this Letter, we describe a series of experiments that explore a variety of pressure-temperature states in Au, accessed using tailored laser pulses. We find that the ambient pressure face-centered-cubic phase is stable under ramp compression to pressures of at least 1 TPa where the body-centered-cubic phase is observed simultaneously.


  • Ultrafast x-ray diffraction of high-pressure phases in dynamically compressed TiO2

    by I. K. Ocampo, R. F. Smith, D. Kim, V. Prakapenka, S. Speziale, M. Schoelmerich, K. Appel, D. N. Polsin, M. Marshall, S. J. Tracy, et al.


  • Open Access

    Sound Velocity and Grüneisen Parameter in Shock‐Melted Silica at Deep Earth Pressures

    by I. K. Ocampo, J. M. Winey, T. S. Duffy

    Silica is a primary component of rocky planet interiors and its melt properties are important for understanding planetary formation and differentiation, magma oceans, and the deep mantle. Although well understood in the solid state, the high‐pressure behavior of liquid silica is poorly constrained at lower mantle pressures. Using laser interferometry to measure shock wave profiles, we report measured stress‐density states and longitudinal sound speeds in shock‐synthesized stishovite, from fused silica staring material, and across the solid‐liquid phase boundary up to 154 GPa. Our results constrain completion of melt at 80 GPa and show that at pressures relevant to the deep mantles of Earth‐sized, rocky planets, the Grüneisen parameter for liquid silica increases with compression. This finding is consistent with a continuous increase in Si‐O coordination above six for liquid silica at core‐mantle boundary relevant pressures and temperatures.


  • Open Access

    Ramp Compression of Germanium Dioxide to Extreme Conditions: Phase Transitions in an SiO2 Analog

    by D. Kim, I. K. Ocampo, R. F. Smith, F. Coppari, M. Millot, J. K. Wicks, J. R. Rygg, J. H. Eggert, T. S. Duffy

    The high-pressure (HP) behavior of dioxides is of interest due to their extensive polymorphism and role as analogs for SiO2, a phase expected to be important in the deep mantles of Earth and terrestrial exoplanets. Here we report on dynamic ramp compression of quartz-type germanium dioxide GeO2 to stresses up to 882 GPa, a higher peak stress than previous studies by a factor of 5. X-ray diffraction data show that HP−PdF2-type GeO2 occurs under ramp loading from 154 to 440 GPa, and this phase persists to higher pressure than predicted by theory. Above 440 GPa, we observe evidence for transformation to a new phase of GeO2. Based on the diffraction data, the best candidate for this new phase is the cotunnite-type structure which has been predicted to be a stable phase of GeO2 above 300 GPa. The HP−PdF2-type and cotunnite-type structures are important phases in a wide range of AX2 compounds, including SiO2, at multihundred GPa stresses. Our results demonstrate that ramp compression can be an effective technique for synthesizing and characterizing such phases in oxides. In addition, we show that pulsed x-ray diffraction under ramp compression can be used to examine lower-symmetry phases in oxide materials.


  • Dynamic compression of [100] MgF2 single crystals: Shock-induced polymorphism to highly coordinated structures

    by I. K. Ocampo, J. M. Winey, Y. Toyoda, T. S. Duffy

    AX2-type compounds exhibit a rich and complex series of phase transitions under compression. The high-pressure polymorphism of rutile-type AX2 difluorides can be characterized by a typical sequence from rutiletype→CaCl2type→HP−PdF2type→cotunnitetype. Relative to dioxides, the reduced valence and ionic radius of the F− anion in rutile-type MgF2 (sellaite) results in lowered transition pressures, making it a useful analog for SiO2 and other dioxides. In this work, MgF2 single crystals were shock-compressed along the [100] direction to 24 to 120 GPa using plate impact techniques, and wave profiles were measured using laser interferometry. At low stresses (24 to 44 GPa), we observe features consistent with an elastic–inelastic response, followed by a phase transformation. Peak stress-density states in this stress range are consistent with those expected for the modified fluorite-type (HP-PdF2) phase or a related structure. At higher stresses (69 to 91 GPa), we observe a two-wave structure with peak stress-density states consistent with transformation to a denser and likely more highly coordinated phase such as the cotunnite-type structure. At 120 GPa, only a single wave structure is observed, indicating that the wave profile features observed at lower stresses are overdriven.