FFF. G. Fomin

F. G. Fomin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


F. G. Fomin has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Ultrawideband antenna arrays on Сlavin radiators

    by P.G. Fomin, O.M Dumin, V.A. Plakhtii, M.V. Nesterenko

    Background. Slot antennas have become widespread due to their good electrodynamic parameters, ease of excitation, and convenient geometry for integration into various devices. As a rule, such antennas are narrowband due to the resonant phenomena that occur in them. However, the use of a complex slot geometry makes it possible to significantly extend the operating frequency range of such a radiator by changing the characteristic impedance along the slot arm, which generates partial reflections of waves at different frequencies in different places of the metal screen cut. The successful law of change of the slot shape from the coordinate makes it possible to provide relatively uniform radiation characteristics of such antenna in the frequency range of several octaves The combination of a slot as a magnetic radiator with a vibrator as an electric radiator dual to the slot can create an opportunity for mutual compensation of the deficiency of one of these antennas at certain frequencies, if the other antenna is effective at these frequencies. This design is called an ultra-wideband Clevin antenna. However, there is an urgent need to increase the radiated energy of the electromagnetic wave and better concentrate its energy in a given direction. One of the solutions to these problems is to create an antenna array based on the combined single radiators described above, which is the subject of this paper. Objectives. To develop antenna array designs based on single combined Klevin radiators, taking into account their interaction and the possibility of simultaneous use of elements of one radiator for another radiator in order to create more compact designs. The latter will not only reduce the size, save resources, but also reduce side radiation. It is also necessary to calculate the radiation characteristics of the resulting arrays and analyze their directivity parameters. Additionally, it is necessary to optimize a single radiating element in order to improve its characteristics compared to our previous work. Materials and methods. The problem of radiation of the obtained antenna array structures is solved by numerical methods in time domain. This approach makes it possible to accurately take into account all the design features of the constructed arrays. Results. The voltage standing wave ratio of a single radiator in a wide frequency range is improved by finding more optimal slot dimensions and its shape. Three antenna array configurations based on ultra-wideband analogs of the Clavin radiator were designed and calculated. The time dependences of the amplitudes of the radiated waves in the far-field in the E- and H-planes were obtained by direct numerical calculation. Conclusion. The possibility of using an ultra-wideband analog of the Clavin emitter for the construction of antenna arrays, including increased compactness due to the double use of one ultra-wideband dipole by two adjacent slots, is shown. The energy gain in the radiated field due to the construction of the antenna array is illustrated. The angular dependence of the main radiation characteristics shows the ability to effectively direct ultra-wideband waves without deteriorating their time shape. A stronger change in the shape of the radiated pulse from the angle of the considered antenna arrays can improve the parameters of the pulse positioning system.

  • Open Access

    Location of objects in a heterogeneous soil using pulse georadar and artificial neural networks

    by O. A. Pryshchenko, V. A. Plakhtii, F. G. Fomin, Y.S. Khodachok

    Background: Detection of hidden objects in the soil layer is a problem that is important in construction, archeology, humanitarian demining, non-destructive testing of road surfaces, flaw detection etc. Studying the peculiarities of electromagnetic filed behavior in heterogeneous media provides a possibility to create subsurface survey systems that can work effectively in real conditions. Objectives: To recognize an object hidden in a heterogeneous medium using ultrawideband ground penetrating radar (GPR) and artificial neural network (ANN), to evaluate the performance of a neural network that is trained only on homogeneous medium, to investigate the stability of recognition results in the presence of noise of different levels in the received time dependencies, to compare the results with a network which is trained on heterogeneous media. Check the ability of the ANN to correctly identify typical objects that were not involved in training. Materials and methods: Modeling of the electrodynamic problem of electromagnetic field propagation is carried out using the finite difference in time domain (FDTD) method. The classification of hidden objects is carried out using the approach of artificial neural networks. Results: An effective algorithm for detecting objects in a heterogeneous soil model was developed using ground-penetrating radar and ANN. Probability distributions of the classification of hidden objects in presence of additive Gaussian noise in time dependencies were obtained. Conclusion: The use of ANNs has shown successful results in the classification of objects located in a heterogeneous ground model. The ability to detect objects containing only a few metal parts was demonstrated. The developed algorithm has a high level of noise immunity even at high signal-to-noise levels. The results of detection and recognition of typical objects, which were not involved in ANN training, showed the effectiveness of this approach.

  • Increasing power of generator on nonlinear magnetic nanostructure

    by I. S. Volvach, O. M. Dumin, V. A. Plakhtii, P. G. Fomin

    Background: One of the most promising areas of development of modern electronics is the creation of spintronic devices, which should replace the traditional semiconductor elements. The use of electron spin as a carrier of information in magnetic nanostructures can radically change modern life. Objectives: The aim of this work is to find ways to increase the power of the generator on the magnetic nanostructure by changing its electrical circuit and more optimal external electromagnetic parameters that affect the state of electrons in the studied layered structure. Materials and methods: The solution of this problem is carried out by numerical simulation of the magnetic nanostructure using a specially created micromagnetic simulator, which implements an algorithm for the simultaneous solution of the system of Maxwell and Landau-Lifshitz-Hilbert equations. The solution of such a complex problem is accelerated by the use of a quasi-static approximation in solving the system of Maxwell's equations, which is justified by the small size of the calculation area compared to the depth of the skin layer. Further calculations of the electrodynamic system are performed using the finite element method. To obtain the best frequency and energy parameters of the generator, it is proposed to introduce a resonant circuit to the schematic diagram of the studied generator, which is excited by short nanosecond pulses. Results: A scheme of a generator on a magnetic nanostructure containing a resonator with concentrated parameters is proposed, and a system of nonlinear integro-differential equations with respect to electric currents is obtained in general. Numerical calculation of this system includes, in addition to the calculation of the scheme, also the modeling of a nonlinear electrodynamic structure by the finite element method. The energy and spectral characteristics of the studied generator are obtained. The search for the optimal values of the geometric parameters of the nanostructure and the magnitude of the external longitudinal magnetization is carried out. Conclusions: Due to the complex nature of nonlinear processes in the magnetic nanostructure, the use of an external resonator, which could improve the spectral parameters of the generated current, did not give a noticeable improvement. The influence of the value of the external magnetization on the output power of the generator is complex and nonlinear, but, in general, a decrease in the level of magnetization leads to a significant decrease in power. It is established that the thickness of the magnetic layer of 6 nm is optimal for improving the energy characteristics of the generator.

  • Comparison of corellation method and artifitial neural networks for determining of object position by ultrawideband fields

    by I. D. Persanov, O.M. Dumin, V. A. Plakhtii, O. A. Pryshchenko, F. G. Fomin

    Background: Global and local positioning systems have a wide area of civil and military applications. Transport, logistics, precise agriculture, industrial technologies, safety systems need a strict definition of objects position on plane or in space. Existing modern positioning systems have some drawbacks in utilization and restrictions in application. Objectives: To improve a system of local positioning on a plane that does not need a time synchronization using the impulse ultrawideband electromagnetic field of two spaced bow-tie antennas and analysis and recognition of time forms of received waves by artificial neural networks and cross correlation method. To carried out the investigation of stability of the positioning system operation in presence of an interference in the form of additive white noise. Materials and methods: The electromagnetic simulation of excitation and radiation of the antennas is carried out by finite difference time domain method. The classification of received impulse form by known samples is realized by two alternative method, i.e. correlation approach and artificial neural networks. Results: The utilization of correlation method and artificial neural networks permitted to realize the positioning system with angular resolution of 1 degree. The probability distributions of recognized angles for different levels of additive noise in received signals for these two techniques are obtained. Conclusion: The comparison of artificial neural network application and correlation method for angle recognition shows that artificial neural networks can demonstrate a better precision than correlation approach. artificial neural network gives a correct angle recognition after statistical averaging of classification results even for the signal to noise ratio 0 dB. Artificial neural networks demonstrate a in three times shorter time of numerical simulation than we need for cross correlation function calculation. The application of shorter electromagnetic impulse increases the quality of angle classification in presence of the noise for both presented methods.