Kalima Pitombeira
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kalima Pitombeira has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Edson Aparecido Mitishita
Universidade Federal do Paraná, Brazil
2 shared publications - Charles Toth
SPIN Laboratory, Department of Civil, Environmental and Geodetic Engineering, The Ohio State University, Columbus, OH, USA
1 shared publication - Jorge Antonio Silva Centeno
Universidade Federal do Paraná
1 shared publication - Marcelo de Abreu
Tecsystem Company, Castelo, ES, Brazil
1 shared publication - Paulo Rodrigo Simões
Universidade Federal do Paraná, Brasil
1 shared publication - Rubens Antonio Leite Benevides
Geomatics Department, Federal University of Paraná, Curitiba 81530-900, PR, Brazil
1 shared publication
Latest Publications
- Open Access
- 11 July 2025
- Published by Copernicus GmbH in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. X-G-2025, 657-664
On-site camera calibration with sub-block of images for UAS Photogrammetry corridor mapping with on-board GNSS-RTK
UAS photogrammetry has gained popularity due to its efficiency and automation in acquiring spatial data. Among its applications, corridor mapping is essential for road and railway planning, transmission line inspection, coastal monitoring, and river geomorphological analysis. High spatial accuracy in corridor mapping typically requires dense GCP distribution or precise sensor position and orientation measurements. When using the direct sensor position obtained by GNSS-RTK, camera calibration is essential in reducing vertical bias on the photogrammetric intersection. Although previous studies have demonstrated the benefits of incorporating multi-height oblique images for improving vertical accuracy, there is a lack of research on more feasible data acquisition strategies for corridor mapping, such as using sub-blocks of oblique images for calibration. Thus, this study addresses this gap by evaluating the impact of different sub-block configurations on IOP estimation and spatial data accuracy. The results show that incorporating oblique images into on-site calibrations significantly improves IOP estimation, particularly for focal length, compared to an on-the-job calibration with only nadir images. Vertical accuracy improves by up to 79% in GNSS-AAT experiments using oblique images, making it possible to achieve checkpoint RMSEs for each coordinate (X, Y, and Z) of approximately 1 GSD, without the need for GCPs. In contrast, on-the-job calibration with nadir images alone resulted in higher Z-axis errors. These findings suggest that using nadir and oblique sub-blocks for on-site calibration can improve vertical accuracy, reduce reliance on GCPs in corridor mapping, and maintain high spatial accuracy.
- 11 July 2025
- Published by Copernicus GmbH in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. X-G-2025, 657-664
Open AccessOn-site camera calibration with sub-block of images for UAS Photogrammetry corridor mapping with on-board GNSS-RTK
UAS photogrammetry has gained popularity due to its efficiency and automation in acquiring spatial data. Among its applications, corridor mapping is essential for road and railway planning, transmission line inspection, coastal monitoring, and river geomorphological analysis. High spatial accuracy in corridor mapping typically requires dense GCP distribution or precise sensor position and orientation measurements. When using the direct sensor position obtained by GNSS-RTK, camera calibration is essential in reducing vertical bias on the photogrammetric intersection. Although previous studies have demonstrated the benefits of incorporating multi-height oblique images for improving vertical accuracy, there is a lack of research on more feasible data acquisition strategies for corridor mapping, such as using sub-blocks of oblique images for calibration. Thus, this study addresses this gap by evaluating the impact of different sub-block configurations on IOP estimation and spatial data accuracy. The results show that incorporating oblique images into on-site calibrations significantly improves IOP estimation, particularly for focal length, compared to an on-the-job calibration with only nadir images. Vertical accuracy improves by up to 79% in GNSS-AAT experiments using oblique images, making it possible to achieve checkpoint RMSEs for each coordinate (X, Y, and Z) of approximately 1 GSD, without the need for GCPs. In contrast, on-the-job calibration with nadir images alone resulted in higher Z-axis errors. These findings suggest that using nadir and oblique sub-blocks for on-site calibration can improve vertical accuracy, reduce reliance on GCPs in corridor mapping, and maintain high spatial accuracy.
- Open Access
- 15 June 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (12) , 3126
Influence of On-Site Camera Calibration with Sub-Block of Images on the Accuracy of Spatial Data Obtained by PPK-Based UAS Photogrammetry
Unmanned Aerial Systems (UAS) Photogrammetry has become widely used for spatial data acquisition. Nowadays, RTK (Real Time Kinematic) and PPK (Post Processed Kinematic) are the main correction methods for accurate positioning used for direct measurements of camera station coordinates in UAS imagery. Thus, 3D camera coordinates are commonly used as additional observations in Bundle Block Adjustment to perform Global Navigation Satellite System-Assisted Aerial Triangulation (GNSS-AAT). This process requires accurate Interior Orientation Parameters to ensure the quality of photogrammetric intersection. Therefore, this study investigates the influence of on-site camera calibration with a sub-block of images on the accuracy of spatial data obtained by PPK-based UAS Photogrammetry. For this purpose, experiments of on-the-job camera self-calibration in the Metashape software with the SfM approach were performed. Afterward, experiments of GNSS-Assisted Aerial Triangulation with on-site calibration in the Erdas Imagine software were performed. The outcomes show that only the experiment of GNSS-AAT with three Ground Control Points yielded horizontal and vertical accuracies close to nominal precisions of the camera station positions by GNSS-PPK measurements adopted in this study, showing horizontal RMSE (Root-Mean Square Error) of 0.222 m and vertical RMSE of 0.154 m. Furthermore, the on-site camera calibration with a sub-block of images significantly improved the vertical accuracy of the spatial information extraction.
- 15 June 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (12) , 3126
Open AccessInfluence of On-Site Camera Calibration with Sub-Block of Images on the Accuracy of Spatial Data Obtained by PPK-Based UAS Photogrammetry
Unmanned Aerial Systems (UAS) Photogrammetry has become widely used for spatial data acquisition. Nowadays, RTK (Real Time Kinematic) and PPK (Post Processed Kinematic) are the main correction methods for accurate positioning used for direct measurements of camera station coordinates in UAS imagery. Thus, 3D camera coordinates are commonly used as additional observations in Bundle Block Adjustment to perform Global Navigation Satellite System-Assisted Aerial Triangulation (GNSS-AAT). This process requires accurate Interior Orientation Parameters to ensure the quality of photogrammetric intersection. Therefore, this study investigates the influence of on-site camera calibration with a sub-block of images on the accuracy of spatial data obtained by PPK-based UAS Photogrammetry. For this purpose, experiments of on-the-job camera self-calibration in the Metashape software with the SfM approach were performed. Afterward, experiments of GNSS-Assisted Aerial Triangulation with on-site calibration in the Erdas Imagine software were performed. The outcomes show that only the experiment of GNSS-AAT with three Ground Control Points yielded horizontal and vertical accuracies close to nominal precisions of the camera station positions by GNSS-PPK measurements adopted in this study, showing horizontal RMSE (Root-Mean Square Error) of 0.222 m and vertical RMSE of 0.154 m. Furthermore, the on-site camera calibration with a sub-block of images significantly improved the vertical accuracy of the spatial information extraction.
- Open Access
- 17 October 2022
- Published by Research, Society and Development in Research, Society and Development
- Vol. 11 (14)
Registro automático, preciso e robusto de imagens com RANSAC (Random Sample Consensus) adaptado para o descritor SIFT (Scale Invariant Feature Transform)
O registro de imagens é um problema comum na visão computacional com diversas aplicações que consiste em encontrar a correta transformação entre pares de imagens que se sobrepõem. Neste trabalho objetiva-se apresentar um modelo automático e preciso para registro de imagens utilizando o descritor SIFT e o método de estimação RANSAC adaptado. O registro ocorre através da estimativa da homografia entre os pares de imagens, que utilizam as correspondências pontuais dadas pelo descritor SIFT. As correspondências são classificadas usando um limiar de erro estimado dinamicamente. A análise considera a dispersão do resíduo em vários limites de erro e adota aquele que minimiza a dispersão e a magnitude do erro. O modelo é testado com 8 pares heterogêneos de imagens divididos em dois grupos: 4 pares obtidos com uma câmera profissional e 4 pares obtidos com uma câmera comum. Devido à alta qualidade das imagens do primeiro grupo, poucas iterações do modelo são necessárias para a estimativa da homografia correta. No segundo grupo, o modelo mostrou que é capaz de construir mosaicos entre pares de imagens com sobreposição inferior a 20%, encontrando correspondências exatas entre pares de imagens independentemente do método de aquisição. Além disso, foi capaz de lidar com até 65% de corrupção entre as correspondências, com um tempo total de execução de alguns segundos.
- 17 October 2022
- Published by Research, Society and Development in Research, Society and Development
- Vol. 11 (14)
Open AccessRegistro automático, preciso e robusto de imagens com RANSAC (Random Sample Consensus) adaptado para o descritor SIFT (Scale Invariant Feature Transform)
O registro de imagens é um problema comum na visão computacional com diversas aplicações que consiste em encontrar a correta transformação entre pares de imagens que se sobrepõem. Neste trabalho objetiva-se apresentar um modelo automático e preciso para registro de imagens utilizando o descritor SIFT e o método de estimação RANSAC adaptado. O registro ocorre através da estimativa da homografia entre os pares de imagens, que utilizam as correspondências pontuais dadas pelo descritor SIFT. As correspondências são classificadas usando um limiar de erro estimado dinamicamente. A análise considera a dispersão do resíduo em vários limites de erro e adota aquele que minimiza a dispersão e a magnitude do erro. O modelo é testado com 8 pares heterogêneos de imagens divididos em dois grupos: 4 pares obtidos com uma câmera profissional e 4 pares obtidos com uma câmera comum. Devido à alta qualidade das imagens do primeiro grupo, poucas iterações do modelo são necessárias para a estimativa da homografia correta. No segundo grupo, o modelo mostrou que é capaz de construir mosaicos entre pares de imagens com sobreposição inferior a 20%, encontrando correspondências exatas entre pares de imagens independentemente do método de aquisição. Além disso, foi capaz de lidar com até 65% de corrupção entre as correspondências, com um tempo total de execução de alguns segundos.