Qingguo Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Qingguo Yang has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Ya Li
School of Civil Engineering, Chongqing Jiaotong University, Chongqiong 400074, China
3 shared publications - Yu Zhou
School of Civil Engineering, Chongqing Jiaotong University, Chongqiong 400074, China
3 shared publications - Yunhao Li
School of Civil Engineering, Chongqing Jiaotong University, Chongqiong 400074, China
3 shared publications - Jiawei Cheng
School of Civil Engineering, Chongqing Jiaotong University, Chongqing 400074, China
2 shared publications - Kelin Chen
School of Civil Engineering, Chongqing Jiaotong University, Chongqiong 400074, China
2 shared publications - Longfei Guan
School of Civil Engineering, Chongqing Jiaotong University, Chongqing 400074, China
2 shared publications
Latest Publications
- Open Access
Effect of Incorporating L-Shaped Folded Metal Aggregates on the Performance of Asphalt Mixtures
With the increase in heavy-load traffic and the growing frequency of extreme weather events, traditional rock aggregates, due to poor morphological stability, are unable to meet the performance requirements of high-grade asphalt pavements in complex environments. Most existing research on metal reinforcement focuses on fiber forms. This study innovatively introduces L-shaped multi-faceted metal aggregates (LFMAs). Through surface energy analysis and tests such as the Marshall test, rutting test, water immersion Marshall test, and freeze–thaw splitting test, the effects of the dosage and particle size of LFMAs on the performance of asphalt mixtures are explored. The results show that LFMAs can form an effective bond with SBS modified asphalt, improving the high-temperature stability and low-temperature crack resistance of asphalt mixtures. Under both water immersion and freeze–thaw conditions, the resistance of asphalt mixtures to water damage decreases with the increase in the dosage of metal aggregates. This research expands the application of three-dimensional metal aggregates, breaks through the limitations of fiber-based materials, and provides a new direction for the development of high-performance asphalt mixtures.
Open AccessEffect of Incorporating L-Shaped Folded Metal Aggregates on the Performance of Asphalt Mixtures
With the increase in heavy-load traffic and the growing frequency of extreme weather events, traditional rock aggregates, due to poor morphological stability, are unable to meet the performance requirements of high-grade asphalt pavements in complex environments. Most existing research on metal reinforcement focuses on fiber forms. This study innovatively introduces L-shaped multi-faceted metal aggregates (LFMAs). Through surface energy analysis and tests such as the Marshall test, rutting test, water immersion Marshall test, and freeze–thaw splitting test, the effects of the dosage and particle size of LFMAs on the performance of asphalt mixtures are explored. The results show that LFMAs can form an effective bond with SBS modified asphalt, improving the high-temperature stability and low-temperature crack resistance of asphalt mixtures. Under both water immersion and freeze–thaw conditions, the resistance of asphalt mixtures to water damage decreases with the increase in the dosage of metal aggregates. This research expands the application of three-dimensional metal aggregates, breaks through the limitations of fiber-based materials, and provides a new direction for the development of high-performance asphalt mixtures.
- Open Access
Application of L-Shaped Zigzag Steel Fibers with Different Parameters in Asphalt Mixtures
Taking AC-13 asphalt mixture as the matrix, this research delves into the impacts of assorted steel fibers on AC-13 asphalt mixture, especially the influence of 17.5 mm × 17.5 mm L-shaped steel fibers. A gradient design with mass dosages of 0%, 1%, 2%, and 3% was employed to evaluate the reinforcement effect of L-shaped steel fiber-reinforced asphalt mixture compared with conventional mixture. Also, comparative analysis between L-shaped and straight steel fibers was conducted through comprehensive mechanical performance tests, including the Marshall stability test, high-temperature wheel tracking test, low-temperature beam bending test, freeze–thaw splitting strength test, and immersion Marshall test. The results demonstrate that L-shaped steel fibers significantly improve the comprehensive mechanical properties of asphalt mixture compared to conventional asphalt mixture, showing remarkable improvements in high-temperature stability, low-temperature crack resistance, and water stability. The overall performance enhancement effect increases by approximately 20%. Compared with straight steel fibers, the performance improvement of the mixtures is slightly greater, with the optimal performance achieved at 2% mass dosage. The standard deviation and coefficient of variation are used to reflect the degree of data dispersion. The results show that the data of L-shaped steel fibers have relatively smaller fluctuations, being more uniform and stable.
Open AccessApplication of L-Shaped Zigzag Steel Fibers with Different Parameters in Asphalt Mixtures
Taking AC-13 asphalt mixture as the matrix, this research delves into the impacts of assorted steel fibers on AC-13 asphalt mixture, especially the influence of 17.5 mm × 17.5 mm L-shaped steel fibers. A gradient design with mass dosages of 0%, 1%, 2%, and 3% was employed to evaluate the reinforcement effect of L-shaped steel fiber-reinforced asphalt mixture compared with conventional mixture. Also, comparative analysis between L-shaped and straight steel fibers was conducted through comprehensive mechanical performance tests, including the Marshall stability test, high-temperature wheel tracking test, low-temperature beam bending test, freeze–thaw splitting strength test, and immersion Marshall test. The results demonstrate that L-shaped steel fibers significantly improve the comprehensive mechanical properties of asphalt mixture compared to conventional asphalt mixture, showing remarkable improvements in high-temperature stability, low-temperature crack resistance, and water stability. The overall performance enhancement effect increases by approximately 20%. Compared with straight steel fibers, the performance improvement of the mixtures is slightly greater, with the optimal performance achieved at 2% mass dosage. The standard deviation and coefficient of variation are used to reflect the degree of data dispersion. The results show that the data of L-shaped steel fibers have relatively smaller fluctuations, being more uniform and stable.
- Open Access
Research on the Influence of Engineered Cementitious Composite’s Water–Cement Ratio and Fiber Content on the Mechanical Performance of Foam Lightweight Soil
This study explores the influence of the water–cement ratio and fiber content in engineered cementitious composite (ECC) on the mechanical characteristics of foamed lightweight soil (FLS) through experimental analysis. Two types of cementitious materials—ECC and ordinary Portland cement (OPC)—were utilized to create FLS specimens under identical parameters to examine their mechanical performance. Results indicate that ECC-FLS exhibits superior toughness, plasticity, and ductility compared to OPC-FLS, validating the potential of ECC as a high-performance material for FLS. To assess the influence of the ECC water–cement ratio, specimens were constructed with varying ratios at 0.2, 0.25, and 0.3, while maintaining other parameters as constant. The experimental results indicate that as the water–cement ratio of ECC increases, the flexural strength, compressive strength, flexural toughness, and compressive elastic modulus of the lightweight ECC-FLS gradually increase, exhibiting a better mechanical performance. Moreover, this study investigates the effect of basalt fiber content in ECC on the mechanical properties of FLS. While keeping other parameters constant, the volume content of basalt fibers varied at 0.1%, 0.3%, and 0.5%, respectively. The experimental results demonstrate that within the range of 0 to 0.5%, the mechanical properties of FLS improved with increasing fiber content. The fibers in ECC effectively enhanced the strength of FLS. In conclusion, the adoption of ECC and appropriate fiber content can significantly optimize the mechanical performance of FLS, endowing it with broader application prospects in engineering practices. ECC-FLS, characterized by excellent ductility and crack resistance, demonstrates versatile engineering applications. It is particularly suitable for soft soil foundations or regions prone to frequent geological activities, where it enhances the seismic resilience of subgrade structures. This material also serves as an ideal construction solution for underground utility tunnels, as well as for the repair and reconstruction of pavement and bridge decks. Notably, ECC-FLS enables the resource utilization of industrial solid wastes such as fly ash and slag, thereby contributing to carbon emission reduction and the realization of a circular economy. These attributes collectively position HDFLS as a sustainable and high-performance construction material with significant potential for promoting environmentally friendly infrastructure development.
Open AccessResearch on the Influence of Engineered Cementitious Composite’s Water–Cement Ratio and Fiber Content on the Mechanical Performance of Foam Lightweight Soil
This study explores the influence of the water–cement ratio and fiber content in engineered cementitious composite (ECC) on the mechanical characteristics of foamed lightweight soil (FLS) through experimental analysis. Two types of cementitious materials—ECC and ordinary Portland cement (OPC)—were utilized to create FLS specimens under identical parameters to examine their mechanical performance. Results indicate that ECC-FLS exhibits superior toughness, plasticity, and ductility compared to OPC-FLS, validating the potential of ECC as a high-performance material for FLS. To assess the influence of the ECC water–cement ratio, specimens were constructed with varying ratios at 0.2, 0.25, and 0.3, while maintaining other parameters as constant. The experimental results indicate that as the water–cement ratio of ECC increases, the flexural strength, compressive strength, flexural toughness, and compressive elastic modulus of the lightweight ECC-FLS gradually increase, exhibiting a better mechanical performance. Moreover, this study investigates the effect of basalt fiber content in ECC on the mechanical properties of FLS. While keeping other parameters constant, the volume content of basalt fibers varied at 0.1%, 0.3%, and 0.5%, respectively. The experimental results demonstrate that within the range of 0 to 0.5%, the mechanical properties of FLS improved with increasing fiber content. The fibers in ECC effectively enhanced the strength of FLS. In conclusion, the adoption of ECC and appropriate fiber content can significantly optimize the mechanical performance of FLS, endowing it with broader application prospects in engineering practices. ECC-FLS, characterized by excellent ductility and crack resistance, demonstrates versatile engineering applications. It is particularly suitable for soft soil foundations or regions prone to frequent geological activities, where it enhances the seismic resilience of subgrade structures. This material also serves as an ideal construction solution for underground utility tunnels, as well as for the repair and reconstruction of pavement and bridge decks. Notably, ECC-FLS enables the resource utilization of industrial solid wastes such as fly ash and slag, thereby contributing to carbon emission reduction and the realization of a circular economy. These attributes collectively position HDFLS as a sustainable and high-performance construction material with significant potential for promoting environmentally friendly infrastructure development.
- Open Access
Influence of Extra-Short Extra-Fine Steel Fibers on Mechanical Properties of Self-Compacting Concrete with Single-Doped Fly Ash
This study assesses the influence of extra-short extra-fine steel fibers on the performance of self-compacting concrete (SCC) modified with fly ash. Replacing standard steel fibers with volume fractions ranging from 0%, 1.5%, 3%, 5% and 6%, the study optimizes the mix design for enhanced workability and mechanical properties. The findings reveal that, although the addition of steel fibers had a negative effect on the flowability, the cohesion is significantly improved, providing a basis for a significant improvement in the mechanical properties. The optimal fiber content is identified at 5%, achieving the highest compressive strength of 71.7 MPa, split tensile strength of 8.2 MPa, and flexural strength of 12.8 MPa at 28 d. However, further increases in fiber content beyond 5% lead to a deceleration in compressive and splitting tensile strength improvement and a 27.5% drop in flexural strength at 28 d. The study also emphasizes the good dispersion within the concrete, which helps to enhance its ductility and crack resistance, to some extent.
Open AccessInfluence of Extra-Short Extra-Fine Steel Fibers on Mechanical Properties of Self-Compacting Concrete with Single-Doped Fly Ash
This study assesses the influence of extra-short extra-fine steel fibers on the performance of self-compacting concrete (SCC) modified with fly ash. Replacing standard steel fibers with volume fractions ranging from 0%, 1.5%, 3%, 5% and 6%, the study optimizes the mix design for enhanced workability and mechanical properties. The findings reveal that, although the addition of steel fibers had a negative effect on the flowability, the cohesion is significantly improved, providing a basis for a significant improvement in the mechanical properties. The optimal fiber content is identified at 5%, achieving the highest compressive strength of 71.7 MPa, split tensile strength of 8.2 MPa, and flexural strength of 12.8 MPa at 28 d. However, further increases in fiber content beyond 5% lead to a deceleration in compressive and splitting tensile strength improvement and a 27.5% drop in flexural strength at 28 d. The study also emphasizes the good dispersion within the concrete, which helps to enhance its ductility and crack resistance, to some extent.
- Open Access
- 1 November 2022
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-18
Study of the Effect of Grouting Material Strength on Semiflexible Pavement Material
In this study, cement mortars with different strengths are poured into the large void matrix asphalt macadam material as a semiflexible pavement (SFP) material and the experimental research is carried out. The current research on SFP is mainly focused on the performance of grouting materials and the influence of grouting matrix materials on the overall mechanical properties of SFP and road performance. However, there are some flaws in the study of the influence of grouting material strength on the performance of SFP materials: the difference between the strengths of the selected grouting materials is relatively small, and in some studies, the chosen grouting material strength is low, which leads to insignificant improvements of SFP material performance; besides, the research indicators are also not very comprehensive. In this study, cement grouting asphalt macadam materials are selected as the research object to examine the effect of grouting material strength on the mechanical properties and road performance of SFP materials. Grouting materials with strengths of 19.8 MPa, 30.7 MPa, and 40.2 MPa were poured into the matrix asphalt macadam with a target void ratio of 24% and asphalt content of 2.9% to prepare the corresponding SFP test specimens. The SFP specimens were then subjected to the compressive test, flexural and tensile test, high-temperature stability test, and low-temperature crack resistance test, and the compressive resilient modulus was measured, thereby analyzing the effect of the cement slurry strength on the cement grouting asphalt macadam materials. The results show that when the strength of the cement mortar is 19.8 MPa, 30.7 MPa, and 40.2 MPa, the corresponding SFP material has better mechanical properties. When the strength of the grouting material is 40.2 MPa, the compressive strength of the SFP material is about the same as that of the grouting material. The strength is more than double that of 19.8 MPa and 30.7 MPa, and the flexural tensile strength and elastic modulus also have the above growth laws. The low-temperature crack resistance and high-temperature stability of the SFP material are enhanced with the increase in the strength of the grouting material. When the strength of the grouting material is 40.2 MPa, the mechanical properties and road performance of the SFP material are relatively better. This study provides a reference for strengthening the mechanical properties of SFP materials and boosting the crack resistance of SFP.
- 1 November 2022
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-18
Open AccessStudy of the Effect of Grouting Material Strength on Semiflexible Pavement Material
In this study, cement mortars with different strengths are poured into the large void matrix asphalt macadam material as a semiflexible pavement (SFP) material and the experimental research is carried out. The current research on SFP is mainly focused on the performance of grouting materials and the influence of grouting matrix materials on the overall mechanical properties of SFP and road performance. However, there are some flaws in the study of the influence of grouting material strength on the performance of SFP materials: the difference between the strengths of the selected grouting materials is relatively small, and in some studies, the chosen grouting material strength is low, which leads to insignificant improvements of SFP material performance; besides, the research indicators are also not very comprehensive. In this study, cement grouting asphalt macadam materials are selected as the research object to examine the effect of grouting material strength on the mechanical properties and road performance of SFP materials. Grouting materials with strengths of 19.8 MPa, 30.7 MPa, and 40.2 MPa were poured into the matrix asphalt macadam with a target void ratio of 24% and asphalt content of 2.9% to prepare the corresponding SFP test specimens. The SFP specimens were then subjected to the compressive test, flexural and tensile test, high-temperature stability test, and low-temperature crack resistance test, and the compressive resilient modulus was measured, thereby analyzing the effect of the cement slurry strength on the cement grouting asphalt macadam materials. The results show that when the strength of the cement mortar is 19.8 MPa, 30.7 MPa, and 40.2 MPa, the corresponding SFP material has better mechanical properties. When the strength of the grouting material is 40.2 MPa, the compressive strength of the SFP material is about the same as that of the grouting material. The strength is more than double that of 19.8 MPa and 30.7 MPa, and the flexural tensile strength and elastic modulus also have the above growth laws. The low-temperature crack resistance and high-temperature stability of the SFP material are enhanced with the increase in the strength of the grouting material. When the strength of the grouting material is 40.2 MPa, the mechanical properties and road performance of the SFP material are relatively better. This study provides a reference for strengthening the mechanical properties of SFP materials and boosting the crack resistance of SFP.
- Open Access
- 7 May 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (9) , 5637
Mechanical Behavior of Refined SCC with High Admixture of Hybrid Micro- and Ordinary Steel Fibers
The addition of steel fiber to self-consolidating concrete (SCC) may considerably prolong concrete cracking time and improve its deforming performance. Current studies mainly apply high content micro-steel fibers to improve the mechanical performance of SCC whilst assuring its workability, however, there are still very few studies concerning the influence of a mixture of a high content of micro-steel fibers with ordinary steel fibers on the performance of SCC. Thus, this paper conducted experimental studies on micro-steel fiber and ordinary-sized steel fiber hybrid reinforced self-consolidating concrete (MOSCC). Plain self-consolidating concrete (PSCC), micro-steel fiber reinforced self-consolidating concrete (MSCC), and ordinary-sized steel fiber reinforced self-consolidating concrete (OSCC) are proposed for comparison with MOSCC in respects of workability and mechanical performance. Test results show that the hybrid micro-steel fiber and ordinary steel fiber highly enhance the compressive strength, flexural strength, and ductility of SCC as well as maintaining its workability. This paper provides reference to the improvement of the mechanical performance of SCC material and the enhancement of crack resistance of concrete structures.
- 7 May 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (9) , 5637
Open AccessMechanical Behavior of Refined SCC with High Admixture of Hybrid Micro- and Ordinary Steel Fibers
The addition of steel fiber to self-consolidating concrete (SCC) may considerably prolong concrete cracking time and improve its deforming performance. Current studies mainly apply high content micro-steel fibers to improve the mechanical performance of SCC whilst assuring its workability, however, there are still very few studies concerning the influence of a mixture of a high content of micro-steel fibers with ordinary steel fibers on the performance of SCC. Thus, this paper conducted experimental studies on micro-steel fiber and ordinary-sized steel fiber hybrid reinforced self-consolidating concrete (MOSCC). Plain self-consolidating concrete (PSCC), micro-steel fiber reinforced self-consolidating concrete (MSCC), and ordinary-sized steel fiber reinforced self-consolidating concrete (OSCC) are proposed for comparison with MOSCC in respects of workability and mechanical performance. Test results show that the hybrid micro-steel fiber and ordinary steel fiber highly enhance the compressive strength, flexural strength, and ductility of SCC as well as maintaining its workability. This paper provides reference to the improvement of the mechanical performance of SCC material and the enhancement of crack resistance of concrete structures.