Marek Lavorenti
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Marek Lavorenti has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Michalis N. Tsampas
Dutch Institute for Fundamental Energy Research (DIFFER)
2 shared publications - Beata Tyburska-Pueschel
Dutch Institute for Fundamental Energy Research (DIFFER), 5612 AJ Eindhoven, The Netherlands
1 shared publication - Foteini M. Sapountzi
Syngaschem BV, Syncat@DIFFER, 5600 HH Eindhoven, The Netherlands
1 shared publication - J. W. (Hans) Niemantsverdriet
Syngaschem, Valeriaanlaan 16, 5672 XD Nuenen, The Netherlands
1 shared publication - Marcel A. Verheijen
Eindhoven University of Technology, 5600 MB Eindhoven, The Netherlands
1 shared publication - Mariadriana Creatore
Eindhoven University of Technology
1 shared publication
Latest Publications
- Open Access
- 17 April 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 41 (3)
Control by atomic layer deposition over the chemical composition of nickel cobalt oxide for the oxygen evolution reaction
Anion exchange membrane water electrolysis (AEMWE) is a promising technology for renewable electricity-driven water splitting toward hydrogen production. However, application of AEMWE at industrial scale requires the development of oxygen evolution reaction (OER) electrocatalysts showing long-term stability under mild alkaline conditions. Among these, nickel cobalt oxide thin films are considered promising candidates. The ideal chemical composition of these oxides remains debatable, with recent literature indicating that rock-salt NiCoO2 may exhibit similar OER activity as the traditional spinel NiCo2O4. In this work, we present the development of a plasma-enhanced atomic layer deposition (ALD) process of nickel cobalt oxide thin films (∼20 nm) with focus on the role of their chemical composition and crystal structure on the OER activity. The film composition is tuned using a supercycle approach built upon CoOx cycles with CoCp2 as a precursor and O2 plasma as a co-reactant and NiOx cycles with Ni(MeCp)2 as a precursor and O2 plasma as a co-reactant. The films exhibit a change in the crystallographic phase from the rock-salt to spinel structure for increasing cobalt at. %. This change is accompanied by an increase in the Ni3+-to-Ni2+ ratio. Interestingly, an increase in electrical conductivity is observed for mixed oxides, with an optimum of (2.4 ± 0.2) × 102 S/cm at 64 at. % Co, outperforming both NiO and Co3O4 by several orders of magnitude. An optimal electrocatalytic performance is observed for 80 at. % Co films. Cyclic voltammetry measurements simultaneously show a strong dependence of the OER-catalytic performance on the electrical conductivity. The present study highlights the merit of ALD in controlling the nickel cobalt oxide chemical composition and crystal structure to gain insight into its electrocatalytic performance. Moreover, these results suggest that it is important to disentangle conductivity effects from the electrocatalytic activity in future work.
- 17 April 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 41 (3)
Open AccessControl by atomic layer deposition over the chemical composition of nickel cobalt oxide for the oxygen evolution reaction
Anion exchange membrane water electrolysis (AEMWE) is a promising technology for renewable electricity-driven water splitting toward hydrogen production. However, application of AEMWE at industrial scale requires the development of oxygen evolution reaction (OER) electrocatalysts showing long-term stability under mild alkaline conditions. Among these, nickel cobalt oxide thin films are considered promising candidates. The ideal chemical composition of these oxides remains debatable, with recent literature indicating that rock-salt NiCoO2 may exhibit similar OER activity as the traditional spinel NiCo2O4. In this work, we present the development of a plasma-enhanced atomic layer deposition (ALD) process of nickel cobalt oxide thin films (∼20 nm) with focus on the role of their chemical composition and crystal structure on the OER activity. The film composition is tuned using a supercycle approach built upon CoOx cycles with CoCp2 as a precursor and O2 plasma as a co-reactant and NiOx cycles with Ni(MeCp)2 as a precursor and O2 plasma as a co-reactant. The films exhibit a change in the crystallographic phase from the rock-salt to spinel structure for increasing cobalt at. %. This change is accompanied by an increase in the Ni3+-to-Ni2+ ratio. Interestingly, an increase in electrical conductivity is observed for mixed oxides, with an optimum of (2.4 ± 0.2) × 102 S/cm at 64 at. % Co, outperforming both NiO and Co3O4 by several orders of magnitude. An optimal electrocatalytic performance is observed for 80 at. % Co films. Cyclic voltammetry measurements simultaneously show a strong dependence of the OER-catalytic performance on the electrical conductivity. The present study highlights the merit of ALD in controlling the nickel cobalt oxide chemical composition and crystal structure to gain insight into its electrocatalytic performance. Moreover, these results suggest that it is important to disentangle conductivity effects from the electrocatalytic activity in future work.
- Open Access
Spark Ablation for the Fabrication of PEM Water Electrolysis Catalyst-Coated Membranes
Proton-exchange-membrane (PEM) electrolyzers represent a promising technology for sustainable hydrogen production, owing to their efficiency and load flexibility. However, the acidic nature of PEM demands the use of platinum-group metal-electrocatalysts. Apart from the associated high capital costs, the scarcity of Ir hinders the large-scale implementation of the technology. Since low-cost replacements for Ir are not available at present, there is an urgent need to engineer catalyst-coated membranes (CCMs) with homogeneous catalyst layers at low Ir loadings. Efforts to realize this mainly rely on the development of advanced Ir nanostructures with maximized dispersion via wet chemistry routes. This study demonstrates the potential of an alternative vapor-based process, based on spark ablation and impaction, to fabricate efficient and durable Ir- and Pt-coated membranes. Our results indicate that spark-ablation CCMs can reduce the Ir demand by up to five times compared to commercial CCMs, without a compromise in activity. The durability of spark-ablation CCMs has been investigated by applying constant and dynamic load profiles for 150 h, indicating different degradation mechanisms for each case without major pitfalls. At constant load, an initial degradation in performance was observed during the first 30 h, but a stable degradation rate of 0.05 mV h−1 was sustained during the rest of the test. The present results, together with manufacturing aspects related to simplicity, costs and environmental footprint, suggest the high potential of spark ablation having practical applications in CCM manufacturing.
Open AccessSpark Ablation for the Fabrication of PEM Water Electrolysis Catalyst-Coated Membranes
Proton-exchange-membrane (PEM) electrolyzers represent a promising technology for sustainable hydrogen production, owing to their efficiency and load flexibility. However, the acidic nature of PEM demands the use of platinum-group metal-electrocatalysts. Apart from the associated high capital costs, the scarcity of Ir hinders the large-scale implementation of the technology. Since low-cost replacements for Ir are not available at present, there is an urgent need to engineer catalyst-coated membranes (CCMs) with homogeneous catalyst layers at low Ir loadings. Efforts to realize this mainly rely on the development of advanced Ir nanostructures with maximized dispersion via wet chemistry routes. This study demonstrates the potential of an alternative vapor-based process, based on spark ablation and impaction, to fabricate efficient and durable Ir- and Pt-coated membranes. Our results indicate that spark-ablation CCMs can reduce the Ir demand by up to five times compared to commercial CCMs, without a compromise in activity. The durability of spark-ablation CCMs has been investigated by applying constant and dynamic load profiles for 150 h, indicating different degradation mechanisms for each case without major pitfalls. At constant load, an initial degradation in performance was observed during the first 30 h, but a stable degradation rate of 0.05 mV h−1 was sustained during the rest of the test. The present results, together with manufacturing aspects related to simplicity, costs and environmental footprint, suggest the high potential of spark ablation having practical applications in CCM manufacturing.