GDGuoli Du

Guoli Du

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Guoli Du has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Tough asymmetric thermochromic ionogels via dynamic in situ phase separation for dual-modal smart optical switching

    by Guoli Du, Jianing Li, Changxing Wang, Yayun Ning, Yifan Yue, Yuechi Xie, Sen Yang, Xuegang Lu

    Despite significant advances in thermochromic materials (TCMs) for smart optical switching, achieving simultaneous optimization of optical switching, mechanical robustness, and environmental tolerance remains a critical challenge for their real-world implementation. Herein, we present tough asymmetric thermochromic ionogels (ATIs) fabricated via dynamic in situ phase separation. The ATIs integrate a thermoresponsive light-scattering layer (LCST: 28 °C to 41 °C) and a mechanically reinforced supporting layer through sequential free-radical polymerization. The resulting material exhibits high transparency (>85% at 20 °C), ultralow-temperature resistance (transparent at −70 °C, even at −196 °C), and exceptional toughness (tensile strength >5 MPa, toughness >17 MJ m -3 ). Leveraging hydrophobic ionic liquid as solvent, the ATIs achieve reversible optical switching (transmittance 400 N m -1 peel strength on glass). Applied to smart cooling windows, ATIs reduce solar radiation by 56.8% while enabling aesthetic customization. Combined with indirect/direct Joule heating technology, ATIs enable active optical switching and even dynamic projection display, offering a scalable platform for all-weather adaptive optical systems.


  • Open Access

    Tough asymmetric thermochromic ionogels via dynamic in situ phase separation for passive/active smart optical switching

    by Xuegang Lu, Guoli Du, Jianing Li, Changxing Wang, Yayun Ning, Yifan Yue, Yuechi Xie, Sen Yang

    Despite significant advances in thermochromic materials (TCMs) for smart optical switching, achieving simultaneous optimization of optical switching, mechanical robustness, and environmental tolerance remains a critical challenge for their real-world implementation. Herein, inspired by the Janus architecture of beetle carapaces, we present tough asymmetric thermochromic ionogels (ATIs) fabricated via dynamic in situ phase separation. The ATIs integrate a thermoresponsive light-scattering layer (LCST: 28°C to 41°C) and a mechanically reinforced supporting layer through sequential free-radical polymerization. The resulting material exhibits high transparency (>85% at 20°C), ultralow-temperature resistance (transparent at −70°C, even at −196°C), and exceptional toughness (tensile strength >5 MPa, toughness >17 MJ m-3). Leveraging hydrophobic ionic liquid as solvent, the ATIs achieve reversible optical switching (transmittance 400 N m-1 peel strength on glass). Applied to smart cooling windows, ATIs reduce solar radiation by 56.8% while enabling aesthetic customization. Combined with indirect/direct Joule heating technology, ATIs enable active optical switching and even dynamic projection display, offering a scalable platform for all-weather adaptive optical systems.

  • Open Access

    Scalable synthesis of phosphorescent SiO2 nanospheres and their use for angle-dependent and thermoresponsive photonic gels with multimode luminescence

    by Changxing Wang, Yayun Ning, Yifan Yue, Guoli Du, Yuechi Xie, Jianing Li, Nazia Bibi, Xiaoxiang Wen, Sen Yang, Xuegang Lu

    Developing room-temperature phosphorescent (RTP) materials with microscale periodic structures presents a promising prospect for future optical applications but remains challenging due to the complex integration of luminescent and structural components. Herein, we present a strategy for large-scale production of RTP silica nanospheres (RTP SiO2 NPs) with a low dispersity in size using a modified Stöber method, where organic molecules are embedded in silica networks and subsequently undergo in-situ carbonization, aggregation and crystallization to form phosphorescent carbon dots under high-temperature calcination. These NPs can self-assemble into photonic crystal (PC) structures, enabling the straightforward integration of structural color, fluorescence (FL) and RTP to achieve multimodal luminescent properties. The angle-dependent photonic bandgap (PBG) generated by the physical periodic structure modulates light propagation in RTP PC gels, creating FL and RTP angle-dependent chromatic responses. Temperature-induced refractive index changes between SiO2 and the liquid matrix further enable dynamic control of light-scattering states, significantly altering transmittance and emission intensities of FL and RTP. This fusion of physical photonic structures with luminescence offers potential approach for constructing advanced multimodal luminescent devices.


  • Strong and Stable Woody Triboelectric Materials Enabled by Biphase Blocking

    by Cong Gao, Jiamin Zhao, Tao Liu, Bin Luo, Mingchao Chi, Song Zhang, Chenchen Cai, Jinlong Wang, Yanhua Liu, Yuzheng Shao, et al.

    Driven by the "Internet of Everything" (IoE) vision, the demand for smart materials is growing. Wood, one of the most abundant and renewable resources, has long been a staple in construction and furnishing applications. To further expand its application range, this study developed a high-strength, stable wood-based triboelectric material through a synergistic biphasic mechanism. The in situ growth of flame retardants and the formation of a dense char layer significantly enhanced the fire resistance of the wood-based triboelectric material, reducing the heat release rate (HRR) by 95.4% and total heat release (THR) by 94.2%. The dense laminate structure provided an excellent impact toughness (126 kJ m-2). As a smart sensor, the wood-based triboelectric material demonstrated the ability to recognize human motion states and trajectories, exhibiting great potential for applications in smart homes. This study provides valuable insights for exploring the potential applications of wood as a smart material.


  • Directional Moisture-Wicking Triboelectric Materials Enabled by Laplace Pressure Differences

    by Zhiwei Wang, Xuelian Zou, Tao Liu, Yunpeng Zhu, Di Wu, Yayu Bai, Guoli Du, Bin Luo, Song Zhang, Mingchao Chi, et al.

    Wearable sensors are experiencing vibrant growth in the fields of health monitoring systems and human motion detection, with comfort becoming a significant research direction for wearable sensing devices. However, the weak moisture-wicking capability of sensor materials leads to liquid retention, severely restricting the comfort of the wearable sensors. This study employs a pattern-guided alignment strategy to construct microhill arrays, endowing triboelectric materials with directional moisture-wicking capability. Within 2.25 s, triboelectric materials can quickly and directionally remove the droplets, driven by the Laplace pressure differences and the wettability gradient. The directional moisture-wicking triboelectric materials exhibit excellent pressure sensing performance, enabling rapid response/recovery (29.1/37.0 ms), thereby achieving real-time online monitoring of human respiration and movement states. This work addresses the long-standing challenge of insufficient moisture-wicking driving force in flexible electronic sensing materials, holding significant implications for enhancing the comfort and application potential of electronic skin and wearable electronic devices.


  • Top Cited Papers
    Open Access

    Fabrication of Advanced Cellulosic Triboelectric Materials via Dielectric Modulation

    by Guoli Du, Jinlong Wang, Yanhua Liu, Jinxia Yuan, Tao Liu, Chenchen Cai, Bin Luo, Siqiyuan Zhu, Zhiting Wei, Shuangfei Wang, et al.

    The rapid rise of triboelectric nanogenerators (TENGs), which are emerging energy conversion devices in advanced electronics and wearable sensing systems, has elevated the interest in high‐performance and multifunctional triboelectric materials. Among them, cellulosic materials, affording high efficiency, biodegradability, and customizability, are becoming a new front‐runner. The inherently low dielectric constant limits the increase in the surface charge density. However, owing to its unique structure and excellent processability, cellulose shows great potential for dielectric modulation, providing a strong impetus for its advanced applications in the era of Internet of Things and artificial intelligence. This review aims to provide comprehensive insights into the fabrication of dielectric‐enhanced cellulosic triboelectric materials via dielectric modulation. The exceptional advantages and research progress in cellulosic materials are highlighted. The effects of the dielectric constant, polarization, and percolation threshold on the charge density are systematically investigated, providing a theoretical basis for cellulose dielectric modulation. Typical dielectric characterization methods are introduced, and their technical characteristics are analyzed. Furthermore, the performance enhancements of cellulosic triboelectric materials endowed by dielectric modulation, including more efficient energy harvesting, high‐performance wearable electronics, and impedance matching via material strategies, are introduced. Finally, the challenges and future opportunities for cellulose dielectric modulation are summarized.


  • Sustainable Triboelectric Materials for Smart Active Sensing Systems

    by Zhiting Wei, Jinlong Wang, Yanhua Liu, Jinxia Yuan, Tao Liu, Guoli Du, Siqiyuan Zhu, Shuangxi Nie

    With the vigorous development of the Internet of Things and artificial intelligence, the active sensing system based on triboelectric nanogenerators plays an excellent performance potential and application value as a pioneering technology for smart manufacturing. Nevertheless, achieving material innovation to strike a good balance between active sensing systems and environmental friendliness remains a difficult task. As the most abundant biopolymer on earth, the sustainability potential and excellent performance of cellulose are of great importance for the development of smart sensing systems. This review intends to provide a new perspective on the sustainability of smart active sensing systems to design and fabricate cellulosic triboelectric materials for self‐powered sensing systems. Herein, the structure and advantageous properties of cellulosic triboelectric materials are briefly described. Furthermore, the structure–property–application relationship of the materials is addressed from the perspective of material design and structure optimization. Next, the latest applications of cellulose triboelectric materials are comprehensively described in smart sensing fields such as environmental monitoring, smart home, smart medical, human–machine interaction, and the Internet of everything. Lastly, the current challenges and future developments of cellulose triboelectric materials for smart sensor systems are presented.