EZE. A. Zhakmanova

E. A. Zhakmanova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


E. A. Zhakmanova has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Energy efficiency enhancement of delayed petroleum coking via pinch analysis

    by Ya. Sergeevs, R.M. Dyussova, G.ZH. Seitenova, E.A. Zhakmanova

    This paper presents the results of optimizing the feed preheating circuit of a delayed coking unit using pinch analysis methodology. The aim of the study is to enhance the energy efficiency of the heat recovery process without installing new heat exchange equipment or modifying the existing furnace. During the research, engineering solutions were proposed to minimize the number of additional air coolers while maintaining the current equipment configuration. It was established that the optimization increased the thermal capacity of the preheating system from 10.4 to 14.6 MW. The practical significance of the work is confirmed by a potential economic effect of approximately 160 million tenge per year. Additionally, a positive impact on the operation of the main fractionating column was identified: enhanced heat removal in the second circulating reflux ensured a sharper separation of light and heavy gas oils. The results demonstrate the effectiveness of hybrid modeling for optimizing existing refinery operations.

  • Investigation of the technological parameters of the catalytic reforming process

    by R.M. Dyusova, Ye.A. Zhakmanova, G.ZH. Seitenova, Borashova

    The paper presents a model of the industrial catalytic reforming process of gasoline fractions, designed for quantitative assessment of the influence of operating parameters on the yield and quality of the reformate. Based on the calculations, the effects of temperature, pressure, and feed space velocity are analyzed. Comparison of the calculated data with industrial experimental results demonstrates good agreement for the octane number, reformate yield, and the dynamics of catalyst activity loss, confirming the adequacy and predictive capability of the model. The developed model can be used as an engineering tool for optimizing the reforming operating regime, selecting compromise conditions between product quality and yield, and predicting the consequences of changes in operating parameters without performing additional experiments on the unit, thereby reducing risks and operating costs.

  • Polymer-bitumen compositions for improving the energy efficiency of road construction

    by A.G. Syzdyk, G.Z. Seitenova, R.M. Dyussova, E.A. Zhakmanova, E. Donbayeva

    This article examines the effect of two types of polypropylene (H030 and H350) and petroleum residue on the bitumen modification process. Bitumen modification is one of the key methods for improving its physical and mechanical properties and enhancing the quality of road pavement. Currently, bitumen modification is widely used in road construction, playing a crucial role in improving its quality and energy efficiency. Studying the effect of polymers on the mechanical stability of bitumen is a relevant issue in increasing the durability of road surfaces. During the study, six different concentrations of polypropylene H030 and H350 were introduced into bitumen samples, and their main characteristics were compared. The obtained results demonstrated that polypropylene significantly alters the properties of bitumen, contributing to increased strength and durability of road pavements. Furthermore, the addition of petroleum residue enhances the rheological properties of the bitumen mixture, improving its adhesion. These studies provide essential data for improving bitumen used in road construction. The research results indicate that the use of polymer-modified bitumen increases the wear resistance of road surfaces, reduces crack formation, and enhances resistance to climatic factors. This, in turn, extends the service life of road pavements and reduces road maintenance costs. Long-lasting pavements help decrease energy consumption for bitumen production and road construction. The obtained data expand the possibilities for the effective use of polymer-modified bitumen mixtures in asphalt concrete production. Thus, the compatibility of bitumen and polypropylene has been studied, and their optimal compositions have been determined.

  • Open Access

    Comparative analysis of catalytic reforming technologies in Kazakhstan

    by Rizagul M. Dyussova, Yekaterina A. Zhakmanova, Gaini Zh. Seitenova

    Background: This study compares catalytic reforming technologies, focusing on fixed-bed reforming and continuous catalyst regeneration (CCR) reforming. Fixed-bed systems offer simpler process configurations and lower operational and maintenance requirements, making them a more cost-effective option. Their ability to extend catalyst life by minimizing the frequency of regeneration and replacement represents a notable economic advantage. In contrast, CCR reforming delivers higher processing efficiency and improved product quality but demands greater operating expenditures and more advanced catalyst control systems. Aim: The study evaluates the effectiveness of different catalytic reforming technologies – fixed-bed and CCR – in terms of their impact on process stability, product quality, feedstock and product composition, as well as their potential to enhance the productivity and operational resilience of Kazakhstan’s refineries amid the ongoing development of the national petrochemical sector. Materials and methods: Comparative analysis, gas chromatography, spectroscopy, component and group analysis, fractional composition determination. Results: The analysis of feedstock used in fixed-bed catalytic reforming demonstrated stable process performance, which contributed to improved predictability of reforming unit operations. The presence of iso-paraffins in the feedstock enhanced the quality of high-octane gasoline, while the increased content of naphthenes and aromatic hydrocarbons in the reformate indicated more efficient conversion of heavy fractions. Conclusion: The analysis confirmed that both fixed-bed and CCR reforming technologies continue to evolve, enabling the production of high-quality end products and ensuring stable refinery operations, thereby contributing to the development of Kazakhstan’s petrochemical industry.


  • ОПТИМИЗАЦИЯ ТЕПЛОВЫХ ПОТОКОВ И РЕЖИМОВ ДЛЯ ПОВЫШЕНИЯ ЭНЕРГОЭФФЕКТИВНОСТИ КАТАЛИТИЧЕСКОГО РИФОРМИНГА

    by Р. М. Дюсова, Е. А. Жакманова, Г. Ж. Сейтенова

    В условиях роста стоимости энергоресурсов и ужесточения экологических требований вопросы повышения энергоэффективности становятся ключевыми для процессов каталитического риформинга, являющегося важнейшей технологией в производстве высокооктановых бензинов, ароматических углеводородов и сырья для нефтегазохимии. Настоящая работа направлена на исследование возможностей оптимизации тепловых потоков и режимов работы оборудования с целью снижения удельного энергопотребления без проведения масштабной реконструкции установок. На основе данных действующей установки каталитического риформинга проведён тепловой и энергетический анализ, рассчитан тепловой баланс, определены потери теплоты, а также проанализирована эффективность водородной циркуляции. Построена математическая модель процесса с возможностью варьирования ключевых параметров (температура, давление, расход сырья и ВСГ), состава сырья. В результате моделирования показано, что внедрение перекрестных теплообменников, закрытие водородного цикла и стабилизация температурных режимов позволяет снизить энергопотребление на 6–7 %, повысить эффективность использования водорода и стабилизировать качество реформата. Полученные результаты подтверждают целесообразность применения комплексного подхода к энергоэффективности риформинга и соответствуют международной практике в области устойчивого развития нефтепереработки. Разработанный подход может быть использован в качестве основы для создания цифровых инструментов мониторинга и оптимизации технологических параметров в режиме реального времени. Ключевые слова: энергоэффективность, каталитический риформинг, режим работы, параметры, тепловой поток

  • Open Access

    SECONDARY MATERIALS IN BITUMEN MODIFICATION AND IMPLEMENTATION OF CIRCULAR ECONOMY

    by A. G. Syzdyk, E. A. Zhakmanova, G. Zh. Seitenova, R. M. Dyussova

    This article explores the potential of using recycled materials for modifying bituminous binders within the framework of the circular economy concept. Polymer waste and crumb rubber were used for bitumen modification. The conducted research demonstrated that these additives enhance the thermal stability, flexibility, and oxidation resistance of bitumen. Furthermore, it was found that the performance characteristics of modified bitumen significantly improve: the brittle fracture temperature decreases, while the softening temperature increases. The optimal concentrations of modifiers were determined, and their effect on the bitumen structure was studied. As a result of the study, the BND 60/90 («POCR» LLP) + 6% FPMB mixture showed the best results in terms of thermal stability and hardness after oxidation, making it suitable for use in high-performance road pavements. The obtained results confirm the effectiveness of integrating recycled materials into road construction, highlighting their environmental and economic benefits. In line with the principles of the circular economy, the use of recycled polymers promotes the rational consumption of natural resources, waste reduction, and environmental sustainability. Such innovative approaches in road construction enable the creation of durable and long-lasting pavements. Moreover, this study proposes innovative methods for bitumen modification, contributing to the improvement of construction material quality and durability. Thus, the use of recycled materials helps enhance the strength of road pavements, minimize environmental impact, and achieve sustainable development goals.


  • Open Access

    IDENTIFICATION AND CHARACTERIZATION OF THE SUPPRESSOR PROTEIN HC-PRO IN PVY-INFECTED POTATO PLANTS OF KAZAKHSTANI SELECTION

    by Y.A. Zhakmanova, T.S. Khosnutdinova, M.Y. Sutula

    Plant viruses pose a serious threat to all agricultural crops, leading to significant yield reduction, deterioration of seed quality, and degradation of cultivars. Potato infection with Potato virus Y (PVY) during the growing season causes severe damage, including leaf curling, leaf spot, and stunted growth due to shortened internodes and ring necrosis of tubers. In recent years, Kazakhstan has seen an increase in aphid populations, the main vectors of plant viruses. Therefore, it is crucial to conduct research on the diagnosis and identification of viral diseases. RNA interference (RNAi) plays a vital role in plant defense against viral infections. Viruses produce suppressor proteins to counteract RNAi, blocking plant defense mechanisms. The structural features of viral suppressors determine their specific functions in efficiently suppressing RNA interference. The HC-Pro protein is one such suppressor, aiding in virus spread and neutralizing plant-synthesized siRNA. In this study, using various methods including visual diagnostics, enzyme-linked immunosorbent assay (ELISA), chromatographic purification of plant extracts infected with PVY, Western blot, and enzymatic reaction with specific HC-Pro antibodies, the suppressor protein HC-Pro encoded by PVY was detected and identified.


  • THE EFFECT OF A FUNGICIDE ON THE DEVELOPMENT OF PHYTOPATHOGENIC INFECTIONS ON SEEDS OF VARIOUS CROPS

    by T.S. Khosnutdinova, E.A Zhakmanova, M.Y Sutula, A.K. Baygelenova, Solnechnoye Village «Experimental Farm Of Oilseeds» Llp, G.E. Sadykanova

    Ежегодно фитопатогены наносят серьезный ущерб сельскому хозяйству, в частности производству и семеноводству масличных, злаковых и бобовых культур. Своевременное и правильное использование протравителей фунгицидного спектра действия в значительной степени может способствовать сокращению зараженных грибковыми патогенами сельскохозяйственных культур.В данной статье представлен методический подход микологического анализа «рулонным методом», благодаря которому возможно установить наличие возбудителей грибковых инфекций и их видовой состав. Целью исследования является определение влияние использования фунгицида широкого спектра действия на основные сельскохозяйственные культуры, возделываемые на семенных и производственных полях в Восточно-Казахстанской области, такие как подсолнечник, пшеница, ячмень, соя, горох. Для этого предварительно был проведен микологический анализ и были установлены образцы с высоким процентом поражения грибковыми патогенами. Затем образцы были обработаны исследуемым фунгицидом. В результате исследования было обнаружено, что фунгицид, в зависимости от культуры в различной степени оказывает влияние на всхожесть семенного материала. Однако, используемыйфунгицид показал различную эффективность в отношении исследуемых заболеваний.Процент поражения резистентными к фунгициду возбудителями грибковых заболеваний не изменился, в то время как данный показатель на восприимчивых грибковых инфекциях сократился до минимума

  • DEVELOPMENT OF PVY SYMPTOMS ON SOLANUM TUBEROSUM PLANTS OF ROCCO, TAVRIA AND ISOLDE VARIETIES

    by T.S. Khosnutdinova, E.A. Zhakmanova, M.Y. Sutula, G.Sh Makhanova, G.E. Sadykanova, Ust-Kamenogorsk City East Kazakhstan Agricultural Experimental Station

    В настоящее время картофель (Solanum tuberosum) является одной из ванейших продовольственных культур по всему миру. Получение низкого урожая картофеля зачастую связано с поражением растений вирусными патогенами. За последнее время наблюдается рост численности тли, которая является одним из переносчиков вирусной инфекции, что приводит к увеличению распространения вирусов. Вирус Y картофеля (PVY) продолжает оставаться одним из самых злостных патогенов картофеля во всем мире, высокая вредоносность обусловлена воздействием вирусной инфекции на рост и развитие растений, потерю урожайности а также качество и товарность клубней. В результате чего особенно важно вести исследования по изучению симпотоматики развития различных штаммов вирусной инфекции PVY. Так как симптомы поражения на картофеле варьируют в зависимости от сорта, штамма вируса и условий выращивания, были проведены исследования по сравнению симптоматики развития инфекции на 3 различных сортах картофеля. Оценены такие критерии как прибавка роста в течении первого месяца вегетации, симптоматика развития заболевания а так же урожайность. Выявлен наиболее устойчивый к Y вирусу сорт.