Yanjun Chang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yanjun Chang has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Jianyun Chen
College of Civil Engineering and Architecture, Key Laboratory of Disaster Prevention and Structural Safety of Ministry of Education, Guangxi Key Laboratory of Disaster Prevention and Engineering Safety, Guangxi University, Nanning 530004, China
2 shared publications - Ke-Shi Zhang
Key Lab of Disaster Prevention and Structural Safety, College of Civil Engineering and Architecture, Guangxi University, Nanning 530004, China
2 shared publications - Qiao Song
College of Civil Engineering and Architecture, Key Laboratory of Disaster Prevention and Structural Safety of Ministry of Education, Guangxi Key Laboratory of Disaster Prevention and Engineering Safety, Guangxi University, Nanning 530004, China
2 shared publications - Zheng Kuang
College of Civil Engineering and Architecture, Key Laboratory of Disaster Prevention and Structural Safety of Ministry of Education, Guangxi Key Laboratory of Disaster Prevention and Engineering Safety, Guangxi University, Nanning 530004, China
2 shared publications - Damin Lu
Key Laboratory of Disaster Prevention and Structural Safety/Guangxi Key Lab Disaster Prevention and Engineering Safety, College of Civil and Architectural Engineering, Guangxi University, Nanning 530004, China
1 shared publication - Duoxin Zhang
School of Civil Engineering and Transportation, North China University of Water Resources and Electric Power, Zhengzhou 450045, China
1 shared publication
Latest Publications
- Open Access
Machine Learning-Based Method for Predicting the Mechanical Response of Prestressed Cable Tensioning in Aqueduct Structures
The mechanical behavior of aqueduct structures exhibits highly complex characteristics during prestress tensioning, making it difficult for the traditional double-control method to accurately predict and real-time control the key stresses. To improve the construction safety of prestressed tensioning and the prediction accuracy of structural prestress responses, this study develops a rapid structural mechanical property prediction method based on machine learning. Taking prestressed aqueducts as the research object, a system of “finite element simulation—sample generation—machine learning prediction” is established. Firstly, multiple groups of tensioning parameter combinations are designed via Latin hypercube sampling, and the stress responses are obtained through finite element analysis to form a high-quality training sample library. Subsequently, critical structural features are extracted based on mesh reconstruction, and stress prediction models are established using the K-Nearest Neighbors (KNN) and Random Forest algorithms respectively; the prediction performance of both models is compared and validated against finite element simulation results. Furthermore, the prediction outputs of the optimal machine learning model were used to analyze the stress distribution and potential stress concentration issues of the structure during the tensioning process. The comparative analysis results indicate that the Random Forest model performs best in terms of stress prediction accuracy and stability, and its prediction results are highly consistent with those of the finite element method. Compared with traditional finite element condition analysis, the machine learning model can complete multi-condition stress prediction in a shorter time. Leveraging its high-efficiency prediction capability, local high-stress areas of the structure in the tensioning construction scheme can be identified, thereby providing effective optimization schemes to improve the stress distribution. The mechanical response prediction method for the prestress tensioning process of aqueducts, with machine learning as the core, constructed in this paper realizes the rapid and reliable prediction of key stresses throughout the entire prestress tensioning process. This method can be applied to assist in optimizing tensioning construction schemes and construction monitoring, providing a practical technical solution for safety control of aqueduct structures during the prestress construction stage.
Open AccessMachine Learning-Based Method for Predicting the Mechanical Response of Prestressed Cable Tensioning in Aqueduct Structures
The mechanical behavior of aqueduct structures exhibits highly complex characteristics during prestress tensioning, making it difficult for the traditional double-control method to accurately predict and real-time control the key stresses. To improve the construction safety of prestressed tensioning and the prediction accuracy of structural prestress responses, this study develops a rapid structural mechanical property prediction method based on machine learning. Taking prestressed aqueducts as the research object, a system of “finite element simulation—sample generation—machine learning prediction” is established. Firstly, multiple groups of tensioning parameter combinations are designed via Latin hypercube sampling, and the stress responses are obtained through finite element analysis to form a high-quality training sample library. Subsequently, critical structural features are extracted based on mesh reconstruction, and stress prediction models are established using the K-Nearest Neighbors (KNN) and Random Forest algorithms respectively; the prediction performance of both models is compared and validated against finite element simulation results. Furthermore, the prediction outputs of the optimal machine learning model were used to analyze the stress distribution and potential stress concentration issues of the structure during the tensioning process. The comparative analysis results indicate that the Random Forest model performs best in terms of stress prediction accuracy and stability, and its prediction results are highly consistent with those of the finite element method. Compared with traditional finite element condition analysis, the machine learning model can complete multi-condition stress prediction in a shorter time. Leveraging its high-efficiency prediction capability, local high-stress areas of the structure in the tensioning construction scheme can be identified, thereby providing effective optimization schemes to improve the stress distribution. The mechanical response prediction method for the prestress tensioning process of aqueducts, with machine learning as the core, constructed in this paper realizes the rapid and reliable prediction of key stresses throughout the entire prestress tensioning process. This method can be applied to assist in optimizing tensioning construction schemes and construction monitoring, providing a practical technical solution for safety control of aqueduct structures during the prestress construction stage.
- 7 November 2022
- Published by IOP Publishing in Modelling and Simulation in Materials Science and Engineering
- Vol. 30 (8) , 085012
Modification of the Johnson–Cook model for metal at a wide range of strain rates and application in the dynamic response of honeycomb panels
In this paper, the H/V-Johnson Cook (JC)/Cowper Symonds (CS) dynamic constitutive relation suitable for a wide range of strain rates is proposed. Based on the experimental data in the existing literatures, the parameters of the H/V-JC/CS constitutive model for metal materials are calibrated by using the global optimization algorithm, which has high accuracy, convenient application, and is unlimited in number of parameters. The obtained parameters do not depend on the initial value and are the global optimal combination. The corresponding ABAQUS visual user material subroutine is compiled and imported into the finite element analysis for the dynamic response of the honeycomb panel structure. The influence of geometric parameters on the energy absorption effect of honeycomb panels under impact load is explored. The research shows that the proposed H/V-JC/CS constitutive model can well describe the mechanical behavior of various metals in a wide range of strain rates under impact load, and can be used in ABAQUS dynamic explicit environment. It provides a high-precision engineering application analysis model for metal structures under dynamic load.
- 7 November 2022
- Published by IOP Publishing in Modelling and Simulation in Materials Science and Engineering
- Vol. 30 (8) , 085012
Modification of the Johnson–Cook model for metal at a wide range of strain rates and application in the dynamic response of honeycomb panels
In this paper, the H/V-Johnson Cook (JC)/Cowper Symonds (CS) dynamic constitutive relation suitable for a wide range of strain rates is proposed. Based on the experimental data in the existing literatures, the parameters of the H/V-JC/CS constitutive model for metal materials are calibrated by using the global optimization algorithm, which has high accuracy, convenient application, and is unlimited in number of parameters. The obtained parameters do not depend on the initial value and are the global optimal combination. The corresponding ABAQUS visual user material subroutine is compiled and imported into the finite element analysis for the dynamic response of the honeycomb panel structure. The influence of geometric parameters on the energy absorption effect of honeycomb panels under impact load is explored. The research shows that the proposed H/V-JC/CS constitutive model can well describe the mechanical behavior of various metals in a wide range of strain rates under impact load, and can be used in ABAQUS dynamic explicit environment. It provides a high-precision engineering application analysis model for metal structures under dynamic load.
- Open Access
Investigation of Yield Surfaces Evolution for Polycrystalline Aluminum after Pre-Cyclic Loading by Experiment and Crystal Plasticity Simulation
This study aims at introducing the back stress of anisotropic strain-hardening into the crystal plasticity theory and demonstrating the rationality of this crystal plasticity model to describe the evolution of the subsequent yield surface of polycrystalline aluminum at the mesoscopic scale under complex pre-cyclic loading paths. By using two different scale finite element models, namely a global finite element model (GFEM) as the same size of the thin-walled tube specimen used in the experiments and a 3D cubic polycrystalline aggregate representative volume element (RVE) model, the evolution of the subsequent yield surface for different unloading cases after 30 pre-cycles is further performed by experiments and numerical simulations within a crystal plasticity finite element (CPFE) frame. Results show that the size and shape of the subsequent yield surfaces are extremely sensitive to the chosen offset strain and the pre-cyclic loading direction, which present pronounced anisotropic hardening through a translation and a distortion of the yield surface characterized by the obvious “sharp corner” in the pre-deformation direction and “flat” in the reverse direction by the definition of small offset strain, while the subsequent yield surface exhibits isotropic hardening reflected by the von Mises circle to be distorted into an ellipse by the definition of large offset strain. In addition, the heterogeneous properties of equivalent plastic strain increment are further discussed under different offset strain conditions. Modeling results from this study show that the heterogeneity of plastic deformation decreases as a law of fraction exponential function with the increasing offset strain. The above analysis indicates that anisotropic hardening of the yield surface is correlated with heterogeneous deformation caused by crystal microstructure and crystal slip. The crystal plasticity model based on the above microscopic mechanism can accurately capture the directional hardening features of the yield surface.
Open AccessInvestigation of Yield Surfaces Evolution for Polycrystalline Aluminum after Pre-Cyclic Loading by Experiment and Crystal Plasticity Simulation
This study aims at introducing the back stress of anisotropic strain-hardening into the crystal plasticity theory and demonstrating the rationality of this crystal plasticity model to describe the evolution of the subsequent yield surface of polycrystalline aluminum at the mesoscopic scale under complex pre-cyclic loading paths. By using two different scale finite element models, namely a global finite element model (GFEM) as the same size of the thin-walled tube specimen used in the experiments and a 3D cubic polycrystalline aggregate representative volume element (RVE) model, the evolution of the subsequent yield surface for different unloading cases after 30 pre-cycles is further performed by experiments and numerical simulations within a crystal plasticity finite element (CPFE) frame. Results show that the size and shape of the subsequent yield surfaces are extremely sensitive to the chosen offset strain and the pre-cyclic loading direction, which present pronounced anisotropic hardening through a translation and a distortion of the yield surface characterized by the obvious “sharp corner” in the pre-deformation direction and “flat” in the reverse direction by the definition of small offset strain, while the subsequent yield surface exhibits isotropic hardening reflected by the von Mises circle to be distorted into an ellipse by the definition of large offset strain. In addition, the heterogeneous properties of equivalent plastic strain increment are further discussed under different offset strain conditions. Modeling results from this study show that the heterogeneity of plastic deformation decreases as a law of fraction exponential function with the increasing offset strain. The above analysis indicates that anisotropic hardening of the yield surface is correlated with heterogeneous deformation caused by crystal microstructure and crystal slip. The crystal plasticity model based on the above microscopic mechanism can accurately capture the directional hardening features of the yield surface.
- Open Access
Investigation of Anisotropic Subsequent Yield Behavior for 45 Steel by the Distortional Yield Surface Constitutive Model
The subsequent anisotropic yield behavior of 45 steel was predicted by the distortional yield surface constitutive model, which can describe the anisotropic subsequent yield and the cross effect of metal associating with loading history. The yield characteristics and plastic hardening behaviors of the 45 steel were simulated under three preloading paths including pre-torsion, pre-tension, and pre-tension–torsion. Based on the comparison between the experimental yield stresses and the simulation by the classical Chaboche model, the proposed model can describe the remarkable anisotropic yield behavior related to the loading history, which can effectively describe the sharp point of yield surface in pre-loading direction and the smaller curvature near its opposite direction. It was successfully simulated by the constitutive model proposed that the subsequent distortional yield surface defined by small offset strain and the degradation process of the distortion feature defined by large offset strain.
Open AccessInvestigation of Anisotropic Subsequent Yield Behavior for 45 Steel by the Distortional Yield Surface Constitutive Model
The subsequent anisotropic yield behavior of 45 steel was predicted by the distortional yield surface constitutive model, which can describe the anisotropic subsequent yield and the cross effect of metal associating with loading history. The yield characteristics and plastic hardening behaviors of the 45 steel were simulated under three preloading paths including pre-torsion, pre-tension, and pre-tension–torsion. Based on the comparison between the experimental yield stresses and the simulation by the classical Chaboche model, the proposed model can describe the remarkable anisotropic yield behavior related to the loading history, which can effectively describe the sharp point of yield surface in pre-loading direction and the smaller curvature near its opposite direction. It was successfully simulated by the constitutive model proposed that the subsequent distortional yield surface defined by small offset strain and the degradation process of the distortion feature defined by large offset strain.
- Open Access
The Anisotropic Distortional Yield Surface Constitutive Model Based on the Chaboche Cyclic Plastic Model
Considering the cross effect in the evolution of subsequent yield surfaces for metals, an anisotropic distortional yield surface constitutive model is developed. By introducing an anisotropic distortional hardening function into the isotropic hardening part of the classical Chaboche rate-dependent constitutive model, the plastic-deformation-induced distortional and anisotropic hardening behaviors of subsequent yield surfaces are characterized. The experimental data of distortional yield surfaces for T2 pure copper under three different loading paths, including pre-tension, pre-torsion, and pre-tension-torsion proportional loading of 45-degree, are simulated by implementing the models into a numerical user defined material (UMAT) procedure based on the ABAQUS finite element package. To validate the anisotropic plastic model, the simulated yield surfaces are compared with experimental observations and predicted results for a crystal plasticity model and good agreement are noted. The simulations demonstrate that the proposed model can accurately capture the characteristics of the distortional yield surface and the anisotropic hardening process of the yield surface. Moreover, the distortional shapes of experimental subsequent yield surfaces in loading direction and opposite direction can be better revealed by the anisotropic plastic constitutive model than the crystal plastic constitutive model.
Open AccessThe Anisotropic Distortional Yield Surface Constitutive Model Based on the Chaboche Cyclic Plastic Model
Considering the cross effect in the evolution of subsequent yield surfaces for metals, an anisotropic distortional yield surface constitutive model is developed. By introducing an anisotropic distortional hardening function into the isotropic hardening part of the classical Chaboche rate-dependent constitutive model, the plastic-deformation-induced distortional and anisotropic hardening behaviors of subsequent yield surfaces are characterized. The experimental data of distortional yield surfaces for T2 pure copper under three different loading paths, including pre-tension, pre-torsion, and pre-tension-torsion proportional loading of 45-degree, are simulated by implementing the models into a numerical user defined material (UMAT) procedure based on the ABAQUS finite element package. To validate the anisotropic plastic model, the simulated yield surfaces are compared with experimental observations and predicted results for a crystal plasticity model and good agreement are noted. The simulations demonstrate that the proposed model can accurately capture the characteristics of the distortional yield surface and the anisotropic hardening process of the yield surface. Moreover, the distortional shapes of experimental subsequent yield surfaces in loading direction and opposite direction can be better revealed by the anisotropic plastic constitutive model than the crystal plastic constitutive model.
- Open Access
- 1 January 2017
- Published by Atlantis Press SARL
Study on Stress Intensity Factor of Two Dimensional Unilateral Crack Based on Finite Element Method
- 1 January 2017
- Published by Atlantis Press SARL
Open AccessStudy on Stress Intensity Factor of Two Dimensional Unilateral Crack Based on Finite Element Method
- 4 August 2008
- Published by China Science Publishing & Media Ltd. in Journal of Inorganic Materials
- Vol. 23 (3) , 509-514
Damage Behavior of 2.5-C/SiC Composite under Tensile Loading
- 4 August 2008
- Published by China Science Publishing & Media Ltd. in Journal of Inorganic Materials
- Vol. 23 (3) , 509-514
Damage Behavior of 2.5-C/SiC Composite under Tensile Loading