Lucia Hughes
Lucia Hughes has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Valeria Nicolosi
Trinity College Dublin
6 shared publications Ahin Roy
CRANN & AMBER Research Centres and School of Chemistry
3 shared publicationsClive Downing
Advanced Microscopy Laboratory Trinity College Dublin Dublin 2 Dublin D02 Ireland
3 shared publications- Ahin Roy
Materials Science Centre, IIT Kharagpur, Kharagpur 721302, India
2 shared publications - Ainur Zhussupbekova
School of Chemistry, Trinity College Dublin, Dublin 2, Ireland
2 shared publications Michelle P. Browne
Helmholtz‐Zentrum Berlin für Materialien und Energie 14109 Berlin Germany
2 shared publications
Latest Publications
- 27 June 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (27) , 24162-24170
Welding 2D Semiconducting Crystals by Covalent Stitching of Grain Boundaries in WS2
The advent of transition metal dichalcogenides (TMDCs) has revolutionized the field of optoelectronics. In this context, recent advances in the large-area synthesis of monolayer WS2 opened the door to potential optoelectronic applications because of its inherently high photoluminescence (PL) yield and superior electron mobility. However, randomly distributed point and line defects are key bottlenecks for efficient charge transport, hindering further development of system-on-chip (SoC) technologies. Herein, we report a molecular welding strategy using benzene-1,4-dithiol (BDT) to simultaneously passivate sulfur vacancies and bridge grain boundary (GB) fissures in monolayer WS2. The GB welding was monitored on the atomic scale by high-angle annular dark-field scanning transmission electron microscopy. This treatment yields uniform PL emission, ∼200-fold enhancement in electron mobility, and a three-order-of-magnitude increase in both on-state current and Ion/Ioff ratio for transistors across GBs, comparable to intragrain characteristics. Additionally, temperature-dependent PL spectroscopy was employed to identify the defect types and the activation energy of GBs. Our approach, utilizing the facile vapor deposition of ad-hoc molecules to repair line defects in 2D crystals, offers a scalable and effective solution to repair extended line defects in two-dimensional (2D) semiconductors, advancing the development of high-performance, uniform 2D optoelectronic systems.
- 27 June 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (27) , 24162-24170
Welding 2D Semiconducting Crystals by Covalent Stitching of Grain Boundaries in WS2
The advent of transition metal dichalcogenides (TMDCs) has revolutionized the field of optoelectronics. In this context, recent advances in the large-area synthesis of monolayer WS2 opened the door to potential optoelectronic applications because of its inherently high photoluminescence (PL) yield and superior electron mobility. However, randomly distributed point and line defects are key bottlenecks for efficient charge transport, hindering further development of system-on-chip (SoC) technologies. Herein, we report a molecular welding strategy using benzene-1,4-dithiol (BDT) to simultaneously passivate sulfur vacancies and bridge grain boundary (GB) fissures in monolayer WS2. The GB welding was monitored on the atomic scale by high-angle annular dark-field scanning transmission electron microscopy. This treatment yields uniform PL emission, ∼200-fold enhancement in electron mobility, and a three-order-of-magnitude increase in both on-state current and Ion/Ioff ratio for transistors across GBs, comparable to intragrain characteristics. Additionally, temperature-dependent PL spectroscopy was employed to identify the defect types and the activation energy of GBs. Our approach, utilizing the facile vapor deposition of ad-hoc molecules to repair line defects in 2D crystals, offers a scalable and effective solution to repair extended line defects in two-dimensional (2D) semiconductors, advancing the development of high-performance, uniform 2D optoelectronic systems.
- Open Access
- 9 May 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (37)
Dielectric Engineering of Perovskite BaMnO3 for the Rapid Heterogeneous Nucleation of Pt Nanoparticles for Catalytic Applications
Microwave heating provides a rapid method for the heterogeneous nucleation of noble metal particles on perovskite support materials for electrocatalytic purposes. To succeed, dielectric tuning of perovskite materials becomes fundamental. Herein, the dielectric engineering of the BaMnO3 perovskite system is carried out through the use of B‐site doping to give BaTi0.5Mn0.5O3. Using a combination of atomic‐scale imaging and electron energy loss spectroscopy (EELS), the preferential filling of the M1 and M3 B‐sites with Mn and Ti ions in the 12R‐rhombohedral perovskite structure is established. While the addition of Ti in the BaMnO3 system has no detrimental effects on the presence of the oxygen reduction reaction (ORR) active Mn3+ states at the surface, it does alter the dielectric constant and loss tangent, thus facilitating the heterogeneous nucleation of Pt nanoparticles on BaTi0.5Mn0.5O3 via rapid microwave heating. Higher Pt loading regimes are found to increase the size and aggregation of the nucleated particles, thus reducing their ORR activity. Therefore, lower Pt loading not only reduces costs but improves overall activity. This work represents future possibilities for the dielectric engineering of perovskite and similar support materials to aid in the quick and easy formation of stable noble metal‐support catalytic systems.
- 9 May 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (37)
Open AccessDielectric Engineering of Perovskite BaMnO3 for the Rapid Heterogeneous Nucleation of Pt Nanoparticles for Catalytic Applications
Microwave heating provides a rapid method for the heterogeneous nucleation of noble metal particles on perovskite support materials for electrocatalytic purposes. To succeed, dielectric tuning of perovskite materials becomes fundamental. Herein, the dielectric engineering of the BaMnO3 perovskite system is carried out through the use of B‐site doping to give BaTi0.5Mn0.5O3. Using a combination of atomic‐scale imaging and electron energy loss spectroscopy (EELS), the preferential filling of the M1 and M3 B‐sites with Mn and Ti ions in the 12R‐rhombohedral perovskite structure is established. While the addition of Ti in the BaMnO3 system has no detrimental effects on the presence of the oxygen reduction reaction (ORR) active Mn3+ states at the surface, it does alter the dielectric constant and loss tangent, thus facilitating the heterogeneous nucleation of Pt nanoparticles on BaTi0.5Mn0.5O3 via rapid microwave heating. Higher Pt loading regimes are found to increase the size and aggregation of the nucleated particles, thus reducing their ORR activity. Therefore, lower Pt loading not only reduces costs but improves overall activity. This work represents future possibilities for the dielectric engineering of perovskite and similar support materials to aid in the quick and easy formation of stable noble metal‐support catalytic systems.
- Open Access
- 15 March 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 33 (24)
Surface Reduced Manganese States as a Source of Oxygen Reduction Activity in BaMnO3
In relation to perovskites, tweaking the oxidation state of the B‐site cation is fundamental to controlling the catalytic activity of these materials, thus necessitating a complete characterization of surface oxidation states. Herein, using a combination of atomic‐scale imaging and spectroscopic techniques, structure‐property correlation in barium manganese oxide (BaMnO3) is established for the oxygen reduction reaction (ORR). Electron energy loss spectroscopy (EELS) on the synthesized BaMnO3 find the rods to contain an amorphous surface layer with reduced Mn3+ states compared to Mn4+ states in the bulk. Consequently, the BaMnO3 rods show electrocatalytic activity for the ORR, which originates from the presence of Mn3+ at the rod surface. Furthermore, heating of the samples in air at 300 and 800 °C results in a decrease in the number of Mn3+ states, and thus lowering of the ORR activity. This study represents a step‐stone study in understanding the mechanism of ORR activity and its association to the Mn3+ state at the perovskite's surface, opening up possibilities for further surface engineering and tuning catalytic properties.
- 15 March 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 33 (24)
Open AccessSurface Reduced Manganese States as a Source of Oxygen Reduction Activity in BaMnO3
In relation to perovskites, tweaking the oxidation state of the B‐site cation is fundamental to controlling the catalytic activity of these materials, thus necessitating a complete characterization of surface oxidation states. Herein, using a combination of atomic‐scale imaging and spectroscopic techniques, structure‐property correlation in barium manganese oxide (BaMnO3) is established for the oxygen reduction reaction (ORR). Electron energy loss spectroscopy (EELS) on the synthesized BaMnO3 find the rods to contain an amorphous surface layer with reduced Mn3+ states compared to Mn4+ states in the bulk. Consequently, the BaMnO3 rods show electrocatalytic activity for the ORR, which originates from the presence of Mn3+ at the rod surface. Furthermore, heating of the samples in air at 300 and 800 °C results in a decrease in the number of Mn3+ states, and thus lowering of the ORR activity. This study represents a step‐stone study in understanding the mechanism of ORR activity and its association to the Mn3+ state at the perovskite's surface, opening up possibilities for further surface engineering and tuning catalytic properties.
- Open Access
- 10 March 2023
- Published by Springer Nature in npj 2D Materials and Applications
- Vol. 7 (1) , 1-11
Understanding the effect of MXene in a TMO/MXene hybrid catalyst for the oxygen evolution reaction
Very recently, it has been reported that mixed transition metal oxide (TMO)/MXene catalysts show improved performance over TMO only catalysts for the oxygen evolution reaction (OER). However, the reasoning behind this observation is unknown. In this work mixed Co(OH)2/Ti3C2Txwere prepared and characterized for the OER using ex situ and operando spectroscopy techniques in order to initiate the understanding of why mixed TMO/MXene materials show better performances compared to TMO only catalysts. This work shows that the improved electrocatalysis for the composite material compared to the TMO only catalyst is due to the presence of higher Co oxide oxidation states at lower OER overpotentials for the mixed TMO/MXene catalysts. Furthermore, the presence of the MXene allows for a more mechanically robust film during OER, making the film more stable. Finally, our results show that small amounts of MXene are more advantageous for the OER during long-term stability measurements, which is linked to the formation of TiO2. The sensitivity of MXene oxidation ultimately limits TMO/MXene composites under alkaline OER conditions, meaning mass fractions must be carefully considered when designing such a catalyst to minimize the residual TiO2formed during its lifetime.
- 10 March 2023
- Published by Springer Nature in npj 2D Materials and Applications
- Vol. 7 (1) , 1-11
Open AccessUnderstanding the effect of MXene in a TMO/MXene hybrid catalyst for the oxygen evolution reaction
Very recently, it has been reported that mixed transition metal oxide (TMO)/MXene catalysts show improved performance over TMO only catalysts for the oxygen evolution reaction (OER). However, the reasoning behind this observation is unknown. In this work mixed Co(OH)2/Ti3C2Txwere prepared and characterized for the OER using ex situ and operando spectroscopy techniques in order to initiate the understanding of why mixed TMO/MXene materials show better performances compared to TMO only catalysts. This work shows that the improved electrocatalysis for the composite material compared to the TMO only catalyst is due to the presence of higher Co oxide oxidation states at lower OER overpotentials for the mixed TMO/MXene catalysts. Furthermore, the presence of the MXene allows for a more mechanically robust film during OER, making the film more stable. Finally, our results show that small amounts of MXene are more advantageous for the OER during long-term stability measurements, which is linked to the formation of TiO2. The sensitivity of MXene oxidation ultimately limits TMO/MXene composites under alkaline OER conditions, meaning mass fractions must be carefully considered when designing such a catalyst to minimize the residual TiO2formed during its lifetime.
- Open Access
- 28 December 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (1) , 925-933
Templated Synthesis of SiO2 Nanotubes for Lithium-Ion Battery Applications: An In Situ (Scanning) Transmission Electron Microscopy Study
One of the weaknesses of silicon-based batteries is the rapid deterioration of the charge-storage capacity with increasing cycle numbers. Pure silicon anodes tend to suffer from poor cycling ability due to the pulverization of the crystal structure after repeated charge and discharge cycles. In this work, we present the synthesis of a hollow nanostructured SiO2 material for lithium-ion anode applications to counter this drawback. To improve the understanding of the synthesis route, the crucial synthesis step of removing the ZnO template core is shown using an in situ closed gas-cell sample holder for transmission electron microscopy. A direct visual observation of the removal of the ZnO template from the SiO2 shell is yet to be reported in the literature and is a critical step in understanding the mechanism by which these hollow nanostructures form from their core-shell precursors for future electrode material design. Using this unique technique, observation of dynamic phenomena at the individual particle scale is possible with simultaneous heating in a reactive gas environment. The electrochemical benefits of the hollow morphology are demonstrated with exceptional cycling performance, with capacity increasing with subsequent charge-discharge cycles. This demonstrates the criticality of nanostructured battery materials for the development of next-generation Li+-ion batteries.
- 28 December 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (1) , 925-933
Open AccessTemplated Synthesis of SiO2 Nanotubes for Lithium-Ion Battery Applications: An In Situ (Scanning) Transmission Electron Microscopy Study
One of the weaknesses of silicon-based batteries is the rapid deterioration of the charge-storage capacity with increasing cycle numbers. Pure silicon anodes tend to suffer from poor cycling ability due to the pulverization of the crystal structure after repeated charge and discharge cycles. In this work, we present the synthesis of a hollow nanostructured SiO2 material for lithium-ion anode applications to counter this drawback. To improve the understanding of the synthesis route, the crucial synthesis step of removing the ZnO template core is shown using an in situ closed gas-cell sample holder for transmission electron microscopy. A direct visual observation of the removal of the ZnO template from the SiO2 shell is yet to be reported in the literature and is a critical step in understanding the mechanism by which these hollow nanostructures form from their core-shell precursors for future electrode material design. Using this unique technique, observation of dynamic phenomena at the individual particle scale is possible with simultaneous heating in a reactive gas environment. The electrochemical benefits of the hollow morphology are demonstrated with exceptional cycling performance, with capacity increasing with subsequent charge-discharge cycles. This demonstrates the criticality of nanostructured battery materials for the development of next-generation Li+-ion batteries.
- Top Cited PapersOpen Access
- 12 November 2022
- Published by Springer Nature in Nature Communications
- Vol. 13 (1) , 1-11
4D printing of MXene hydrogels for high-efficiency pseudocapacitive energy storage
2D material hydrogels have recently sparked tremendous interest owing to their potential in diverse applications. However, research on the emerging 2D MXene hydrogels is still in its infancy. Herein, we show a universal 4D printing technology for manufacturing MXene hydrogels with customizable geometries, which suits a family of MXenes such as Nb2CTx, Ti3C2Tx, and Mo2Ti2C3Tx. The obtained MXene hydrogels offer 3D porous architectures, large specific surface areas, high electrical conductivities, and satisfying mechanical properties. Consequently, ultrahigh capacitance (3.32 F cm−2 (10 mV s−1) and 233 F g−1 (10 V s−1)) and mass loading/thickness-independent rate capabilities are achieved. The further 4D-printed Ti3C2Tx hydrogel micro-supercapacitors showcase great low-temperature tolerance (down to –20 °C) and deliver high energy and power densities up to 93 μWh cm−2 and 7 mW cm−2, respectively, surpassing most state-of-the-art devices. This work brings new insights into MXene hydrogel manufacturing and expands the range of their potential applications.
- 12 November 2022
- Published by Springer Nature in Nature Communications
- Vol. 13 (1) , 1-11
Top Cited PapersOpen Access4D printing of MXene hydrogels for high-efficiency pseudocapacitive energy storage
2D material hydrogels have recently sparked tremendous interest owing to their potential in diverse applications. However, research on the emerging 2D MXene hydrogels is still in its infancy. Herein, we show a universal 4D printing technology for manufacturing MXene hydrogels with customizable geometries, which suits a family of MXenes such as Nb2CTx, Ti3C2Tx, and Mo2Ti2C3Tx. The obtained MXene hydrogels offer 3D porous architectures, large specific surface areas, high electrical conductivities, and satisfying mechanical properties. Consequently, ultrahigh capacitance (3.32 F cm−2 (10 mV s−1) and 233 F g−1 (10 V s−1)) and mass loading/thickness-independent rate capabilities are achieved. The further 4D-printed Ti3C2Tx hydrogel micro-supercapacitors showcase great low-temperature tolerance (down to –20 °C) and deliver high energy and power densities up to 93 μWh cm−2 and 7 mW cm−2, respectively, surpassing most state-of-the-art devices. This work brings new insights into MXene hydrogel manufacturing and expands the range of their potential applications.
- 27 October 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 126 (44) , 18980-18987
Two-Dimensional Chiroptically Active Copper Oxide Nanostructures
- 27 October 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 126 (44) , 18980-18987
Two-Dimensional Chiroptically Active Copper Oxide Nanostructures
- 22 July 2022
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 28 (S1) , 2586-2588
The Advanced Characterization and Structure-Property Correlation of BaMnO3 for the Oxygen Reduction Reaction Using Electron Microscopy
- 22 July 2022
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 28 (S1) , 2586-2588
The Advanced Characterization and Structure-Property Correlation of BaMnO3 for the Oxygen Reduction Reaction Using Electron Microscopy
- 1 March 2021
- Published by Royal Microscopical Society
Atomic-Scale Characterization of Metastable Sn(II)-Oxide Nanosheets
- 1 March 2021
- Published by Royal Microscopical Society
Atomic-Scale Characterization of Metastable Sn(II)-Oxide Nanosheets