Marzhan Chazhabayeva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Marzhan Chazhabayeva has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Amina Bukayeva
Yessenov University
9 shared publications - Almira Madiyarova
Yessenov University
4 shared publications - Gulmira Bilashova
Yessenov University
4 shared publications - Gulmira Bulekbayeva
Yessenov University
3 shared publications - Гульсара Мамбеталиева
Yessenov University
3 shared publications - Almira Madiyarova
Sh. Yessenov Caspian University of Technologies and Engineering
2 shared publications
Latest Publications
- Open Access
- 23 October 2026
- Published by University of Zilina in Communications - Scientific letters of the University of Zilina
- Vol. 28 (4) , A137-A148
The Esg-Oriented Approaches to Developing a Sustainable Rail Freight Market: Methodology and Effectiveness Assessment
- 23 October 2026
- Published by University of Zilina in Communications - Scientific letters of the University of Zilina
- Vol. 28 (4) , A137-A148
Open AccessThe Esg-Oriented Approaches to Developing a Sustainable Rail Freight Market: Methodology and Effectiveness Assessment
- 30 June 2025
- Published by Toraighyrov University in Science and Technology of Kazakhstan
- No. 2,2025,p. 202-217
ANALYSIS OF DYNAMOMETRIC MAPS OF VARIOUS STATES OF OPERATION OF THE ROD BOREHOLE PUMPING UNIT
The article examines the analysis of various operating conditions of a downhole pumping unit using dynamometric maps. Dynamometric maps allow you to monitor the operation of the rod pump in detail: it is possible to identify defects such as gas exposure, liquid shocks, valve leakproofness, the effect of bending the polished stem and rupture of the stem. Liquid shocks are caused by a mismatch between the displacement rate of the pump and the performance of removing liquid from the tank, which leads to excessive pumping. As a result, the pump may suffer mechanical damage due to increased deflection and wear. One of the most common defects is the lack of tightness of the discharge valve or plunger. To understand the shape of the dynamometer card when the intake valve leaks, it must be borne in mind that the dynamometer card of the well shows the load depending on the displacement above the plunger. Therefore, a leak in the intake valve indicates its effect on the plunger load. Excessive accumulation of gas inside the pump can lead to a situation where the gas is completely clogged, when the gas stops working and the intake and discharge valves remain closed. Low and high displacement of the plunger also affects this condition, as leaks disrupt the efficient operation of the valves and adversely affect pump performance. A polished rod that has a malfunction is usually characterized by its bending. This bending causes significant friction between the stem and the stuffing box of the wellhead. Such friction can lead to oil leakage from the mouth or even breakage of the polished stem itself. Keywords: pump, dynamometer, plunger, discharge valve, intake valve, liquid, pump card shape, polished rod.
- 30 June 2025
- Published by Toraighyrov University in Science and Technology of Kazakhstan
- No. 2,2025,p. 202-217
ANALYSIS OF DYNAMOMETRIC MAPS OF VARIOUS STATES OF OPERATION OF THE ROD BOREHOLE PUMPING UNIT
The article examines the analysis of various operating conditions of a downhole pumping unit using dynamometric maps. Dynamometric maps allow you to monitor the operation of the rod pump in detail: it is possible to identify defects such as gas exposure, liquid shocks, valve leakproofness, the effect of bending the polished stem and rupture of the stem. Liquid shocks are caused by a mismatch between the displacement rate of the pump and the performance of removing liquid from the tank, which leads to excessive pumping. As a result, the pump may suffer mechanical damage due to increased deflection and wear. One of the most common defects is the lack of tightness of the discharge valve or plunger. To understand the shape of the dynamometer card when the intake valve leaks, it must be borne in mind that the dynamometer card of the well shows the load depending on the displacement above the plunger. Therefore, a leak in the intake valve indicates its effect on the plunger load. Excessive accumulation of gas inside the pump can lead to a situation where the gas is completely clogged, when the gas stops working and the intake and discharge valves remain closed. Low and high displacement of the plunger also affects this condition, as leaks disrupt the efficient operation of the valves and adversely affect pump performance. A polished rod that has a malfunction is usually characterized by its bending. This bending causes significant friction between the stem and the stuffing box of the wellhead. Such friction can lead to oil leakage from the mouth or even breakage of the polished stem itself. Keywords: pump, dynamometer, plunger, discharge valve, intake valve, liquid, pump card shape, polished rod.
- 19 February 2025
- Published by Wroclaw Board of Scientific Technical Societies Federation NOT in Journal of Machine Engineering
- Vol. 25 (1) , 68-78
Analysis of the Influence of Rolling Modes on the Geometric Parameters of the Zone of Surface Plastic Deformation of a Part
Structural strengthening of the surface layer material by surface plastic deformation ensures the formation of low roughness, a given depth and degree of hardening, and reduces residual compressive stresses in the surface layers. In the processes of surface plastic deformation by rolling with rollers, the microgeometric and physical-mechanical characteristics of surfaces are formed as a result of deformation of the surface layer of the part under the force of the roller on the surface being processed . In this case, the processes of plastic deformation of the surfaces of parts do not occur throughout the entire volume, but are localized in the zone immediately adjacent to the working profile of the roller in contact with the surface. This requires determining the geometric characteristics of the contact zone and establishing their dependence on the rolling modes. The purpose of this study is to study the influence of rolling modes on the geometric parameters of the surface plastic deformation zone, to determine their optimal ratios for stabilizing the contact zone of the roller and the surface of the part, obtaining a new microrelief of the surface layer of the part, ensuring high quality indicators. The patterns of changes in the plastic deformation zone have been studied.
- 19 February 2025
- Published by Wroclaw Board of Scientific Technical Societies Federation NOT in Journal of Machine Engineering
- Vol. 25 (1) , 68-78
Analysis of the Influence of Rolling Modes on the Geometric Parameters of the Zone of Surface Plastic Deformation of a Part
Structural strengthening of the surface layer material by surface plastic deformation ensures the formation of low roughness, a given depth and degree of hardening, and reduces residual compressive stresses in the surface layers. In the processes of surface plastic deformation by rolling with rollers, the microgeometric and physical-mechanical characteristics of surfaces are formed as a result of deformation of the surface layer of the part under the force of the roller on the surface being processed . In this case, the processes of plastic deformation of the surfaces of parts do not occur throughout the entire volume, but are localized in the zone immediately adjacent to the working profile of the roller in contact with the surface. This requires determining the geometric characteristics of the contact zone and establishing their dependence on the rolling modes. The purpose of this study is to study the influence of rolling modes on the geometric parameters of the surface plastic deformation zone, to determine their optimal ratios for stabilizing the contact zone of the roller and the surface of the part, obtaining a new microrelief of the surface layer of the part, ensuring high quality indicators. The patterns of changes in the plastic deformation zone have been studied.
- Open Access
- 28 September 2024
- Published by JSC Academy of Logistics and Transport in Вестник КазАТК
- Vol. 136 (1) , 27-34
EVALUATION OF THE EFFECTIVENESS OF THE AUTOMATED CONTAINER TERMINAL MANAGEMENT SYSTEM CTMS
Automation of seaports is a necessary action to ensure stable high growth in international shipping volumes and increase competitive and price pressure in the business of shipping companies. The article provides a comprehensive assessment of the effectiveness of the automated Container Terminal Management System (CTMS), designed to use information technology in the management of marine container terminals. It has been established that the CTMS automated control system, in comparison with the automated container site management system (ACS MS), has a number of advantages in optimizing the movement of container flows at the terminal by optimizing port warehouse logistics and organizing effective controlling of container terminal transport processes. The possibilities of a significant increase in the speed and accuracy of container cargo handling using CTMS have been identified. The main directions of effective functioning of CTMS are defined, taking into account the fact that all operations controlled by it are carried out using mobile data collection terminals. Their use when performing operations in a warehouse allows you to reduce the number of errors, the time of operations, and provides the opportunity to obtain accurate information in real time.
- 28 September 2024
- Published by JSC Academy of Logistics and Transport in Вестник КазАТК
- Vol. 136 (1) , 27-34
Open AccessEVALUATION OF THE EFFECTIVENESS OF THE AUTOMATED CONTAINER TERMINAL MANAGEMENT SYSTEM CTMS
Automation of seaports is a necessary action to ensure stable high growth in international shipping volumes and increase competitive and price pressure in the business of shipping companies. The article provides a comprehensive assessment of the effectiveness of the automated Container Terminal Management System (CTMS), designed to use information technology in the management of marine container terminals. It has been established that the CTMS automated control system, in comparison with the automated container site management system (ACS MS), has a number of advantages in optimizing the movement of container flows at the terminal by optimizing port warehouse logistics and organizing effective controlling of container terminal transport processes. The possibilities of a significant increase in the speed and accuracy of container cargo handling using CTMS have been identified. The main directions of effective functioning of CTMS are defined, taking into account the fact that all operations controlled by it are carried out using mobile data collection terminals. Their use when performing operations in a warehouse allows you to reduce the number of errors, the time of operations, and provides the opportunity to obtain accurate information in real time.
- Open Access
- 1 July 2024
- Published by JSC Academy of Logistics and Transport in Вестник КазАТК
- Vol. 134 (5) , 40-48
IMPROVING THE PERFORMANCE OF CUTTING TOOLS BY USING NANOCOMPOSITES
Scientific research in improving the characteristics of cutting tools using nanocomposites is an actively developing area that garners attention from engineers and tool manufacturers. This article explores the potential of nanocomposites in enhancing strength, wear resistance, hardness, and other crucial attributes of cutting tools. The synthesis methods of nanocomposites, their structural characteristics, and their influence on tool mechanical properties are discussed. Additionally, experimental findings demonstrating the efficacy of nanocomposites in boosting productivity and extending the lifespan of cutting tools across various industries are presented. Overall, the utilization of nanocomposites presents new opportunities for developing more efficient and durable cutting tools, thereby advancing modern production technologies. The practical significance lies in the developed methodology for optimizing pressure in the magnetron sputtering process, based on the simplex approach to coating deposition rate. This methodology aids in enhancing the productivity of the installation. Furthermore, the developed software infrastructure, facilitating automated production and utilization of optimization models under various conditions for ion-plasma magnetron synthesis of hardening coatings, can improve the efficiency of hardening processes for metal-cutting tools, tooling, and components of gas turbine engines.
- 1 July 2024
- Published by JSC Academy of Logistics and Transport in Вестник КазАТК
- Vol. 134 (5) , 40-48
Open AccessIMPROVING THE PERFORMANCE OF CUTTING TOOLS BY USING NANOCOMPOSITES
Scientific research in improving the characteristics of cutting tools using nanocomposites is an actively developing area that garners attention from engineers and tool manufacturers. This article explores the potential of nanocomposites in enhancing strength, wear resistance, hardness, and other crucial attributes of cutting tools. The synthesis methods of nanocomposites, their structural characteristics, and their influence on tool mechanical properties are discussed. Additionally, experimental findings demonstrating the efficacy of nanocomposites in boosting productivity and extending the lifespan of cutting tools across various industries are presented. Overall, the utilization of nanocomposites presents new opportunities for developing more efficient and durable cutting tools, thereby advancing modern production technologies. The practical significance lies in the developed methodology for optimizing pressure in the magnetron sputtering process, based on the simplex approach to coating deposition rate. This methodology aids in enhancing the productivity of the installation. Furthermore, the developed software infrastructure, facilitating automated production and utilization of optimization models under various conditions for ion-plasma magnetron synthesis of hardening coatings, can improve the efficiency of hardening processes for metal-cutting tools, tooling, and components of gas turbine engines.
- Open Access
- 11 June 2024
- Published by JSC Academy of Logistics and Transport in Вестник КазАТК
- Vol. 133 (4) , 47-54
МАШИНА БӨЛШЕКТЕРІНІҢ МЕТАЛЛ БЕТТЕРІНЕ ҚОРҒАНЫС ЖАБЫНДАРЫН ҚОЛДАНУДЫҢ ЗАМАНАУИ ТӘСІЛДЕРІН ЗЕРТТЕУ
Мақалада металдарға жоғары легірленген материалдарды қолданудың күшейтетін технологияларына талдау жасалды. Машина бөлшектерінің металл беттеріне тозуға төзімді жабындарды жағу процестері мен технологиялары қарастырылған. Авторлар машина бөлшектерінің металл беттеріне, атап айтқанда мұнай мен газды тасымалдауға арналған құбырларға қатайтатын жабындарды жағуға арналған бірқатар құрылғыларды ұсынды. Металл ұнтақтарын газбен жалынмен бүрку құрылғысы, оның ішінде саптамасы бар термоқұрал, термоқұралда қосылған цилиндрлік саптама, жану камерасына отын мен тотықтырғышты жеткізуге арналған үш арналы коллектор, қосымша тотықтырғышты соруға арналған арналары бар сақина диффузоры, металл ұнтағын жану камерасына жеткізуге арналған құрылғы ұсынылады. Өңделетін бөлшектерді дайындамаларды жылжыту және термит ұнтағын жану камерасына беру механизмі газ ағыны цилиндрлік саптаманың көлденең қимасында көлбеу арналармен орындалады.
- 11 June 2024
- Published by JSC Academy of Logistics and Transport in Вестник КазАТК
- Vol. 133 (4) , 47-54
Open AccessМАШИНА БӨЛШЕКТЕРІНІҢ МЕТАЛЛ БЕТТЕРІНЕ ҚОРҒАНЫС ЖАБЫНДАРЫН ҚОЛДАНУДЫҢ ЗАМАНАУИ ТӘСІЛДЕРІН ЗЕРТТЕУ
Мақалада металдарға жоғары легірленген материалдарды қолданудың күшейтетін технологияларына талдау жасалды. Машина бөлшектерінің металл беттеріне тозуға төзімді жабындарды жағу процестері мен технологиялары қарастырылған. Авторлар машина бөлшектерінің металл беттеріне, атап айтқанда мұнай мен газды тасымалдауға арналған құбырларға қатайтатын жабындарды жағуға арналған бірқатар құрылғыларды ұсынды. Металл ұнтақтарын газбен жалынмен бүрку құрылғысы, оның ішінде саптамасы бар термоқұрал, термоқұралда қосылған цилиндрлік саптама, жану камерасына отын мен тотықтырғышты жеткізуге арналған үш арналы коллектор, қосымша тотықтырғышты соруға арналған арналары бар сақина диффузоры, металл ұнтағын жану камерасына жеткізуге арналған құрылғы ұсынылады. Өңделетін бөлшектерді дайындамаларды жылжыту және термит ұнтағын жану камерасына беру механизмі газ ағыны цилиндрлік саптаманың көлденең қимасында көлбеу арналармен орындалады.
- Open Access
- 4 March 2024
- Published by JSC Academy of Logistics and Transport in Вестник КазАТК
- Vol. 131 (2) , 55-65
EVALUATION OF INTELLIGENT ANALYSIS METHODS INSTRUMENT CONDITIONS
This article provides an overview of modern data mining methods used to monitor and diagnose the condition of the cutting tool.When operating metal-cutting machines, the issues of increasing reliability, productivity, accuracy of work, improving the quality of manufacturing parts, as well as the level of automation remain relevant. All these factors depend to one degree or another on the condition of the cutting tool on the machine during processing. Cutting tools play an important role in industrial production, where the accuracy and efficiency of material processing are crucial. To ensure the smooth operation of mechanical equipment, systems for monitoring and diagnosing the condition of cutting tools become an integral part of production processes. Machining accuracy is the most important characteristic of any technological equipment, for example, a numerically controlled machine tool (CNC). As you know, increasing the accuracy of manufacturing parts increases the service life of machines and equipment. They cannot function normally with insufficient manufacturing accuracy of its components due to dynamic loads arising during operation, which cause accelerated wear of the equipment and its further destruction. The causes of processing errors on metal-cutting machines are associated with inaccuracy, deformations and wear of machines, devices and tools, as well as directly with deformations of workpieces processed on machines under the action of cutting forces, heating, errors in the measurement process and others. For CNC machines performing processing in automatic mode, the requirements for the quality of the tool as a parameter determining the accuracy of processing are significantly increasing. It is unacceptable to treat the problem of processing accuracy insufficiently carefully in the conditions of computerized production, built according to the principle of «deserted work». One of the promising ways to improve the quality of processing is to create and apply intelligent control systems for technological equipment that ensure the manufacture of parts taking into account the technical characteristics and condition of the machine, cutting tool, workpiece and information and measurement subsystem. Production systems should be equipped with intelligent modules in order to improve the quality of processing, increase the efficiency and reliability of production processes. In the field of diagnostics and control of the cutting process, such systems will also have the highest level of execution of the quality of the technological process.
- 4 March 2024
- Published by JSC Academy of Logistics and Transport in Вестник КазАТК
- Vol. 131 (2) , 55-65
Open AccessEVALUATION OF INTELLIGENT ANALYSIS METHODS INSTRUMENT CONDITIONS
This article provides an overview of modern data mining methods used to monitor and diagnose the condition of the cutting tool.When operating metal-cutting machines, the issues of increasing reliability, productivity, accuracy of work, improving the quality of manufacturing parts, as well as the level of automation remain relevant. All these factors depend to one degree or another on the condition of the cutting tool on the machine during processing. Cutting tools play an important role in industrial production, where the accuracy and efficiency of material processing are crucial. To ensure the smooth operation of mechanical equipment, systems for monitoring and diagnosing the condition of cutting tools become an integral part of production processes. Machining accuracy is the most important characteristic of any technological equipment, for example, a numerically controlled machine tool (CNC). As you know, increasing the accuracy of manufacturing parts increases the service life of machines and equipment. They cannot function normally with insufficient manufacturing accuracy of its components due to dynamic loads arising during operation, which cause accelerated wear of the equipment and its further destruction. The causes of processing errors on metal-cutting machines are associated with inaccuracy, deformations and wear of machines, devices and tools, as well as directly with deformations of workpieces processed on machines under the action of cutting forces, heating, errors in the measurement process and others. For CNC machines performing processing in automatic mode, the requirements for the quality of the tool as a parameter determining the accuracy of processing are significantly increasing. It is unacceptable to treat the problem of processing accuracy insufficiently carefully in the conditions of computerized production, built according to the principle of «deserted work». One of the promising ways to improve the quality of processing is to create and apply intelligent control systems for technological equipment that ensure the manufacture of parts taking into account the technical characteristics and condition of the machine, cutting tool, workpiece and information and measurement subsystem. Production systems should be equipped with intelligent modules in order to improve the quality of processing, increase the efficiency and reliability of production processes. In the field of diagnostics and control of the cutting process, such systems will also have the highest level of execution of the quality of the technological process.
- Open Access
- 28 April 2023
- Published by JSC Academy of Logistics and Transport in Вестник КазАТК
- Vol. 125 (2) , 343-353
AUTOMATION OF THE PROCESS OF BITUMEN PRODUCTION
One of the most important directions in the field of oil refining is the rational use of oil residues by involving them in processes such as visbreaking, coking, de-asphalting, bitumen production. Petroleum bitumen is used in road construction, in the repair of roads, airfields, in industrial and civil construction (for the manufacture of roofing materials, for the insulation of pipelines from ground corrosion, for the preparation of paint and varnish materials). The quality of petroleum bitumen is a determining factor in ensuring the durability of road surfaces. To date, up to 70% of bitumen produced in Kazakhstan and the CIS countries do not meet the assortment and quality requirements of the modern market, and this primarily concerns bitumen for road, construction and special purposes. The decrease in natural oil reserves and the difficulty of obtaining high-quality bitumen from processed raw materials at most bitumen plants necessitates the search for new materials to obtain binders of a given quality. The process of bitumen production, carried out on an industrial scale, is very complex, but by now it has been sufficiently studied. However, the approach to the study of this process from the standpoint of the physico-chemical technology of oil dispersed systems reveals new aspects that allow us to hope for its further intensification. Due to the increasing volumes of consumption and the expansion of the field of application of petroleum bitumen, the issue of searching for new raw materials is acute. One of the most promising deposits of petroleum bitumen rocks are West Kazakhstan, where more than 50 deposits with reserves of 152 million tons have been discovered. However, to date, the extraction of petroleum bitumen rocks and their use in construction have not acquired significant proportions, due to their insufficient knowledge and imperfection of their processing technology. Until now, the main attention in matters of oxidation is paid to the study of the state of the vapor–liquid system, calculations of the partial pressure of volatile components of the oil system depending on its composition and external conditions, which is fundamental for technological calculations. In this case, oil is represented as a multicomponent molecular solution, the vapor-liquid interface is considered flat, and the vapor pressure above the flat surface is equal to the pressure in the liquid phase. In addition, in all thermodynamic and technological calculations, the vapor-liquid system is thermodynamically formed, leaving the process of vapor phase generation without due attention.
- 28 April 2023
- Published by JSC Academy of Logistics and Transport in Вестник КазАТК
- Vol. 125 (2) , 343-353
Open AccessAUTOMATION OF THE PROCESS OF BITUMEN PRODUCTION
One of the most important directions in the field of oil refining is the rational use of oil residues by involving them in processes such as visbreaking, coking, de-asphalting, bitumen production. Petroleum bitumen is used in road construction, in the repair of roads, airfields, in industrial and civil construction (for the manufacture of roofing materials, for the insulation of pipelines from ground corrosion, for the preparation of paint and varnish materials). The quality of petroleum bitumen is a determining factor in ensuring the durability of road surfaces. To date, up to 70% of bitumen produced in Kazakhstan and the CIS countries do not meet the assortment and quality requirements of the modern market, and this primarily concerns bitumen for road, construction and special purposes. The decrease in natural oil reserves and the difficulty of obtaining high-quality bitumen from processed raw materials at most bitumen plants necessitates the search for new materials to obtain binders of a given quality. The process of bitumen production, carried out on an industrial scale, is very complex, but by now it has been sufficiently studied. However, the approach to the study of this process from the standpoint of the physico-chemical technology of oil dispersed systems reveals new aspects that allow us to hope for its further intensification. Due to the increasing volumes of consumption and the expansion of the field of application of petroleum bitumen, the issue of searching for new raw materials is acute. One of the most promising deposits of petroleum bitumen rocks are West Kazakhstan, where more than 50 deposits with reserves of 152 million tons have been discovered. However, to date, the extraction of petroleum bitumen rocks and their use in construction have not acquired significant proportions, due to their insufficient knowledge and imperfection of their processing technology. Until now, the main attention in matters of oxidation is paid to the study of the state of the vapor–liquid system, calculations of the partial pressure of volatile components of the oil system depending on its composition and external conditions, which is fundamental for technological calculations. In this case, oil is represented as a multicomponent molecular solution, the vapor-liquid interface is considered flat, and the vapor pressure above the flat surface is equal to the pressure in the liquid phase. In addition, in all thermodynamic and technological calculations, the vapor-liquid system is thermodynamically formed, leaving the process of vapor phase generation without due attention.
- Open Access
- 20 March 2023
- Published by JSC Academy of Logistics and Transport in Вестник КазАТК
- Vol. 131 (2) , 24-33
БИТУМДЫ ӨНДІРУ ПРОЦЕСІН ЗЕРТТЕУ
Мұнай өңдеу саласындағы негізгі бағыттардың бірі мұнай қалдықтарын висбрекинг, кокстеу, асфальтсыздандыру және битум өндірісі сияқты процестерге қосу арқылы тиімді пайдалану болып табылады. Мұнай битумдары шатыр материалдарын жасау, құбырларды коррозиядан қорғау, сондай-ақ лак-бояу композицияларын өндіру үшін пайдаланылатын жол құрылысында, аэродромдарды жөндеуде, сондай-ақ өнеркәсіптік және азаматтық құрылыста кеңінен қолданылады. Мұнай битумдарының сапасы жол жабындарының беріктігін қамтамасыз етуде шешуші рөл атқарады. Қазіргі уақытта Қазақстанда және ТМД елдерінде өндірілетін битумдардың 70% - ы ассортимент пен сапа тұрғысынан нарықтың заманауи талаптарына сәйкес келмейді, бұл әсіресе жол құрылысына, жалпы құрылысқа және арнайы қолдануға арналған битумдарға қатысты. Мұнай қорларының азаюына және қолда бар шикізаттан жоғары сапалы битум алудың қиындығына байланысты көптеген мұнай өңдеу зауыттарында қажетті сападағы тұтқыр заттарды өндіру үшін балама материалдарды іздеу қажеттілігі туындайды. Өнеркәсіптік масштабтағы битум өндірісі күрделі процесс, бірақ бүгінгі күнге дейін жеткілікті зерттелген. Алайда, бұл процесті мұнай дисперсті жүйелерінің физика-химиялық технологиясы тұрғысынан зерттеу оны одан әрі оңтайландыруға перспективалар ашатын жаңа аспектілерді ашады. Алайда, құрылыста мұнай-битум жыныстарын пайдалану оларды өңдеу технологияларының жетілмегендігі мен жетілмегендігіне байланысты әлі де кең таралмады. Қазіргі уақытта тотығу зерттеулерінің негізгі бағыты бу-сұйықтық жүйесінің күйіне, сондай-ақ оның құрамына және қоршаған орта жағдайларына байланысты мұнай жүйесінің ұшпа компоненттерінің парциалды қысымын есептеуге бағытталған, бұл технологиялық есептеулердің негізгі аспектісі болып табылады.
- 20 March 2023
- Published by JSC Academy of Logistics and Transport in Вестник КазАТК
- Vol. 131 (2) , 24-33
Open AccessБИТУМДЫ ӨНДІРУ ПРОЦЕСІН ЗЕРТТЕУ
Мұнай өңдеу саласындағы негізгі бағыттардың бірі мұнай қалдықтарын висбрекинг, кокстеу, асфальтсыздандыру және битум өндірісі сияқты процестерге қосу арқылы тиімді пайдалану болып табылады. Мұнай битумдары шатыр материалдарын жасау, құбырларды коррозиядан қорғау, сондай-ақ лак-бояу композицияларын өндіру үшін пайдаланылатын жол құрылысында, аэродромдарды жөндеуде, сондай-ақ өнеркәсіптік және азаматтық құрылыста кеңінен қолданылады. Мұнай битумдарының сапасы жол жабындарының беріктігін қамтамасыз етуде шешуші рөл атқарады. Қазіргі уақытта Қазақстанда және ТМД елдерінде өндірілетін битумдардың 70% - ы ассортимент пен сапа тұрғысынан нарықтың заманауи талаптарына сәйкес келмейді, бұл әсіресе жол құрылысына, жалпы құрылысқа және арнайы қолдануға арналған битумдарға қатысты. Мұнай қорларының азаюына және қолда бар шикізаттан жоғары сапалы битум алудың қиындығына байланысты көптеген мұнай өңдеу зауыттарында қажетті сападағы тұтқыр заттарды өндіру үшін балама материалдарды іздеу қажеттілігі туындайды. Өнеркәсіптік масштабтағы битум өндірісі күрделі процесс, бірақ бүгінгі күнге дейін жеткілікті зерттелген. Алайда, бұл процесті мұнай дисперсті жүйелерінің физика-химиялық технологиясы тұрғысынан зерттеу оны одан әрі оңтайландыруға перспективалар ашатын жаңа аспектілерді ашады. Алайда, құрылыста мұнай-битум жыныстарын пайдалану оларды өңдеу технологияларының жетілмегендігі мен жетілмегендігіне байланысты әлі де кең таралмады. Қазіргі уақытта тотығу зерттеулерінің негізгі бағыты бу-сұйықтық жүйесінің күйіне, сондай-ақ оның құрамына және қоршаған орта жағдайларына байланысты мұнай жүйесінің ұшпа компоненттерінің парциалды қысымын есептеуге бағытталған, бұл технологиялық есептеулердің негізгі аспектісі болып табылады.
- Open Access
- 25 February 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (5) , 4179
Fuzzy-Logic Approach to Estimating the Fleet Efficiency of a Road Transport Company: A Case Study of Agricultural Products Deliveries in Kazakhstan
The estimation of the efficiency of road transport vehicles remains a significant problem for contemporary transport companies, as numerous stochastic impacts, such as demand stochasticity, road conditions uncertainty, transport market fluctuations, etc., influence the technological process. A fuzzy-logic approach is proposed to consider the uncertainty relating to estimating vehicle fleet efficiency. According to the developed approach, vehicle efficiency is described based on a membership function, whereas the efficiency of the whole vehicle fleet is evaluated as a fuzzy set. To demonstrate the developed approach, a case study is depicted for using cargo vehicles to deliver agricultural products in the Republic of Kazakhstan. The numeric results are presented for the selected models of vehicles that a transport company uses to service a set of clients located in Northern Kazakhstan: the transport services provided for each of the clients are characterized by numeric demand parameters—the consignment weight and the delivery distance. The completed calculations allowed us to obtain the membership functions for the alternative vehicle models and to present the transport company’s vehicle fleet as a fuzzy set.
- 25 February 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (5) , 4179
Open AccessFuzzy-Logic Approach to Estimating the Fleet Efficiency of a Road Transport Company: A Case Study of Agricultural Products Deliveries in Kazakhstan
The estimation of the efficiency of road transport vehicles remains a significant problem for contemporary transport companies, as numerous stochastic impacts, such as demand stochasticity, road conditions uncertainty, transport market fluctuations, etc., influence the technological process. A fuzzy-logic approach is proposed to consider the uncertainty relating to estimating vehicle fleet efficiency. According to the developed approach, vehicle efficiency is described based on a membership function, whereas the efficiency of the whole vehicle fleet is evaluated as a fuzzy set. To demonstrate the developed approach, a case study is depicted for using cargo vehicles to deliver agricultural products in the Republic of Kazakhstan. The numeric results are presented for the selected models of vehicles that a transport company uses to service a set of clients located in Northern Kazakhstan: the transport services provided for each of the clients are characterized by numeric demand parameters—the consignment weight and the delivery distance. The completed calculations allowed us to obtain the membership functions for the alternative vehicle models and to present the transport company’s vehicle fleet as a fuzzy set.